Control of acetic acid concentration by pH-stat continuous substrate feeding in heterotrophic culture phase of two-stage cultivation of Alcaligenes eutrophus for production of P(3HB) from CO2, H2, and O2 under non-explosive conditions

A-two stage culture method of hydrogen-oxidizing bacterium, Alcaligenes eutrophus, is used to produce poly-D-3-hydroxybutyrate, P(3HB) from CO2, O2, and H2 without using a very high oxygen transfer rate while maintaining the O2 concentration in gas phase below 6.9 (v/v)% to prevent detonation of the gas mixture. The two-stage method consists of a heterotrophic culture using fructose as carbon source for exponential cell growth and an autotrophic culture for P(3HB) accumulation. We investigated the use of acetic acid as a cheaper carbon source than fructose for the heterotrophic culture in the two-stage method. However, the acetate concentration in the culture system must be maintained at 1.0 g. dm-3 since its inhibitory effect on the cell growth is very strong. Then, high cell density cultivation of A. eutrophus was investigated by pH-stat continuous feeding of acetic acid to control acetate concentration. As a result, acetate concentration was automatically maintained around 1.0 g. dm-3 by using a feed with a composition in CH3COOH/CH3COONH4/KH2PO4 molar ratio of 5:1:0.084. Cell concentration increased to 48.6 g. dm-3 after 21 h of cultivation. The cell mass grown in the fed-batch culture on acetic acid was useful for P(3HB) production from CO2 in the subsequent autotrophic culture stage. Copyright 1999 John Wiley & Sons, Inc.     

Effects of rheological change by addition of carboxymethylcellulose in culture media of an air-lift fermentor on poly-D-3-hydroxybutyric acid productivity in autotrophic culture of hydrogen-oxidizing bacterium, Alcaligenes eutrophus

The effects of rheological change by addition of sodium carboxymethylcellulose (CMC) to culture medium in an air-lift-type fermentor on autotrophic production of poly-(D-3-hydroxybutyric acid) [P(3HB)] by two-stage culture of Alcaligenes eutrophus is investigated. Addition of 0.05% CMC increased P(3HB) production rate during the P(3HB) accumulation phase to twice that of the control culture. It was thought that addition of a small amount of CMC was beneficial for production of P(3HB) employing the air-lift fermentor under safe autotrophic culture conditions in wich oxygen concentration was maintained below 6.9% (v/v). the volumetric mass transfer coefficient (K(L)a) observed in the presence of CMC is shown to correlated with the P(3HB) production rate obtained. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 529-533, 1997.     

Microbial production of poly-D-3-hydroxybutyrate from CO2

This short review covers the biotechnological aspects of the production of poly-D-3-hydroxybutyric acid, P(3HB), from H2, O2 and CO2 by autotrophic culture of the hydrogen-oxidizing bacterium, Ralstonia eutropha. Considering the efficiency of utilization of a gas mixture as substrate, a practical fermentation process using R. eutropha for the mass production of P(3HB) from CO2 should be designed on the basis of a recycled-gas, closed-circuit culture system. Also, maintaining the O2 concentration in a gas phase lower than 6.9% (v/v) is essential to prevent the gas mixture from exploding. Our study, using an explosion-proof fermentation bench plant and a two-stage culture system with a newly designed air-lift fermenter, demonstrated that very high P(3HB) yield and productivity could be obtained while the O2 concentration was maintained below 6.9%. However, a study on the continuous production of P(3HB) from CO2 by chemostat culture of R. eutropha revealed that the productivity and content of P(3HB) in the cells was considerably lower than by fed-batch culture. It is deduced that the use of the hydrogen-oxidizing bacterium, Alcaligenes latus, which accumulates P(3HB) even in the exponential growth phase, will be useful for the effective production of P(3HB) from CO2.     

Enhanced production of D-(-)-3-hydroxybutyric acid by recombinant Escherichia coli

Wild-type bacteria including Escherichia coli normally do not produce extracellular D-(-)-3-hydroxybutyric acid (3HB). To produce extracellular chiral 3HB, a new pathway for synthesis of 3HB was constructed by simultaneous expression of genes of beta-ketothiolase (phbA), acetoacetyl-CoA reductase (phbB), phosphor-transbutyrylase (ptb) and butyrate kinase (buk) in E. coli strain DH5alpha. E. coli DH5alpha containing any one of the four plasmids pBHR69, pUCAB, p68CM or pKKAB that harbor the phbA and phbB genes produced small amounts of 3HB, ranging from 75 to 400 mg l(-1), while E. coli DH5alpha harboring p68CMPTK containing genes of phbA, phbB, ptb and buk increased the 3HB concentration to 1.4 g l(-1) in shake flasks supplemented with LB broth and 20 g l(-1) glucose. 3HB production was further improved to over 2 g l(-1) in shake flasks when E. coli DH5alpha hosted two plasmids simultaneously that separately contained phbA and phbB in one plasmid while ptb and buk in the other. A batch fermentation run in a 5-l fermenter produced approximately 5 g l(-1) 3HB after 24 h. A fed-batch process increased 3HB production to 12 g l(-1) after 48 h of fermentation.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in Alcaligenes eutrophus

Copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus at 30 degrees C in nitrogen-free culture solutions containing gamma-butyrolactone alone or with fructose or butyric acid as the carbon sources. When gamma-butyrolactone was used as the sole carbon source, the 4HB fraction in copolyester increased from 9 to 21 mol% as the concentration of gamma-butyrolactone in the culture solution increased from 10 to 25 g/l. The addition of fructose to the culture solution of gamma-butyrolactone resulted in a decrease in the 4HB fraction in copolyester. The copolyesters produced from gamma-butyrolactone and fructose by A. eutrophus were shown to have random sequence distribution of 3HB and 4HB units by analysis of the 125 MHz 13C n.m.r. spectra. In contrast, a mixture of random copolyesters with two different 4HB fractions was produced by A. eutrophus when gamma-butyrolactone and butyric acid were used as the carbon sources. These results are discussed on the basis of a proposed biosynthetic pathway of P(3HB-co-4HB). The copolyester films became soft with an increase in the 4HB fraction, and the elongation to break at 23 degrees C increased from 5 to 444% as the 4HB fraction increased from 0 to 16 mol%. The P(3HB-co-10% 4HB) film was shown to be biodegradable in an activated sludge.     

Production of D-(--)-3-hydroxyalkanoic acid by recombinant Escherichia coli

Pathways for extracellular production of chiral D-(-)-3-hydroxybutyric acid (3HB) and D-(-)-3-hydroxyalkanoic acid (mcl-3HA) were constructed by co-expression of genes of beta-ketothiolase (phbA), acetoacetyl-CoA reductase (phbB) and 3-hydroxyacyl-ACP CoA transacylase (phaG), respectively, in Escherichia coli strain DH5alpha. The effect of acrylic acid and glucose on production of both 3HB and mcl-3HA was investigated. It was found that the addition of acrylic acid significantly increased production of 3HB and mcl-3HA consisting of 3-hydroxyoctanoic acid and 3-hydroxydecanoic acid in a ratio of 1:3 from 199 mg x l(-1) to 661 mg x l(-1) and from 27 mg x l(-1) to 135 mg x l(-1), respectively, in shake flask studies when glucose was present in the medium at the very beginning of fermentation. The timing of glucose addition had no effect on 3HB production. In contrast, mcl-3HA production was affected by glucose addition, an mcl-3HA concentration of 193 mg x l(-1) was obtained when glucose was added to the culture at 12 h. A more than seven-fold increase was obtained when compared with that in medium containing glucose at the beginning of fermentation. However, a decrease in production of 3HB and mcl-3HA was found when glucose was added at 12 h to the culture containing acrylic acid. The repressive effect of acrylic acid on acetic acid production was also evaluated and discussed.     

Production of poly(4-hydroxybutyric acid) by fed-batch cultures of recombinant strains of Escherichia coli

A recombinant strain of Escherichia coli was used to produce poly(4-hydroxybutyric acid), P(4HB), homopolyester by fed-batch culture in M9 mineral salts medium containing glucose and 4-hydroxybutyric acid as carbon sources. The final cell dry weight, P(4HB) concentration and P(4HB) content were 12.6 g/l, 4.4 g/l, and 36% of cell dry weight, respectively, in a 27-l stirred and aerated fermenter after 60 h of fed-batch fermentation at constant pH.     

Production of poly(3-hydroxybutyrate) from whey by fed-batch culture of recombinant Escherichia coli in a pilot-scale fermenter

Production of poly(3-hydroxybutyrate) [P(3HB)] from wheyby fed-batch culture of recombinant Escherichia coli CGSC 4401 harboring a plasmid containing the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes was examined in a 30 l fermenter supplying air only. With lactose below 2 g l^–1, cells grew to 12 g dry cell l^–1 with 9% (w/w) P(3HB) content. Accumulation of P(3HB) could be triggered by increasing lactose to 20 g l^–1. By employing this strategy, 51 g dry cell l^–1 was obtained with a 70% (w/w) P(3HB) content after 26 h. The productivity was 1.35 g P(3HB) l^–1 h^–1. The same fermentation strategy was used in a 300 l fermenter, and 30 g dry cell l^–1 with 67% (w/w) P(3HB) content was obtained in 20 h.     

Synthesis of poly (3-hydroxybutyrate-co-3-hydroxyoctanoate) by a Sinorhizobium fredii strain

AIMS: The potential of a Sinorhizobium fredii strain to produce a copolymer from glucose and sodium dodecanoate substrates was investigated. METHODS AND RESULTS: Using an orthogonal design in a flask-shaker culture system, the vital regulation conditions for copolymer synthesis were optimized. These optimal results were applied to further studies in a two-stage fed-batch fermentation with a 10-l fermentor. When the biomass approached 33.5 g l(-1) dry cells at 35 h, 7 mmol l(-1) sodium dodecanoate was added into the broth to trigger the copolymer synthesis. After further culturing for 3 h, the copolymer product could be 17.14 g l(-1). The molecular structure of the copolymer was determined to be a poly (3-hydroxybutyrate-co-3-hydroxyoctanoate) [P (HB-HO)] by nuclear magnetic resonance. The content of HB and HO in P (HB-HO) was 79.2% (w/w) and 20.8% (w/w) respectively. The molecular weight of the P (HB-HO) was measured as 1.85 x 10(5) Da by a viscosity method. CONCLUSION: The results demonstrated that the S. fredii strain used could be a potential candidate for the industrial production of the copolymer. SIGNIFICANCE AND IMPACT OF THE STUDY: Some basic fermentation parameters were acquired through the fed-batch culturing experiments and they should be applicable in developing large-scale fermentation technologies for producing the P (HB-HO) copolymers.     

补料培养提高真养产碱杆菌产3-羟基丁酸和3-羟基戊酸共聚物生产强度的研究

对Alcaligenes eutrophus进行高密度培养,研究表明在发酵过程中进行有效控制,可以较大幅度地提高3－羟基丁酸和3－羟基戊酸共聚物[P(3HB-co-3HV)]的生产强度。实验中选择使用限氮的方法积累P(3HB-co-3HV),分别采用丙酸和戊酸为3HV前体,对摇瓶种子生长状态,停氮时机对菌体生产P(3HB-co-3HV)的影响以及补酸（3HV前体）策略进行了研究,在6．6L罐中,以葡萄糖为碳源,以丙酸为3HV前体培养50h,细胞干重,PHA产量,PHA含量分别达到149．9g/L,149.9g/L,83.3%(其中3HV组分占PHA的12．4mol%),生产强度达到2．50（g.h^-1.L^-1);以戊酸为3HV前体培养45h,细胞干重,PHA产量,PHA含量分别达到160．2g/L,119.0g/L,74.2%（其中3HV组分占PHA的17．7mol%)生产强度达到2．64（g.h^-1.L^-1)。     

Biosynthesis of poly(3-hydroxyalkanoate) from amino acids

It was found that an optically active copolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), denoted as P(3HB-co-3HV), is synthesized by Alcaligenes eutrophus H16 from several amino acids under various fermentation conditions. The optimum condition for the biosynthesis from one amino acid, threonine, was investigated and its biosynthetic pathway was discussed on the basis of the relation between the fermentation condition and the co-monomer composition of the produced polyesters.     

High-cell-density cyclic fed-batch fermentation of a poly(3-hydroxybutyrate)-accumulating thermophile, Chelatococcus sp. strain MW10

Different fermentation strategies were employed for the cultivation of a new poly(3-hydroxybutyrate)-accumulating thermophilic bacterium, Chelatococcus sp. strain MW10, with the aim of achieving high-cell-density (HCD) growth and high poly(3-hydroxybutyrate) [poly(3HB)] productivity. Enhanced cultivation was achieved by a cyclic fed-batch fermentation (CFBF) technique (42-liter scale). Maximal poly(3HB) productivity was obtained during the second cycle [16.8 ± 4.2 g poly(3HB)/liter]. At the end of CFBF (265 h), an HCD of up to 115.0 ± 4.3 g cell dry weight/liter was achieved.     

Biosynthesis of enantiopure (S)-3-hydroxybutyric acid in metabolically engineered Escherichia coli

A biosynthetic pathway for the production of (S)-3-hydroxybutyric acid (S3HB) from glucose was established in recombinant Escherichia coli by introducing the beta-ketothiolase gene from Ralstonia eutropha H16, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene from R. eutropha H16, or Clostridium acetobutylicum ATCC824, and the 3-hydroxyisobutyryl-CoA hydrolase gene from Bacillus cereus ATCC14579. Artificial operon consisting of these genes was constructed and was expressed in E. coli BL21 (DE3) codon plus under T7 promoter by isopropyl beta-D: -thiogalactoside (IPTG) induction. Recombinant E. coli BL21 (DE3) codon plus expressing the beta-ketothiolase gene, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene, and the 3-hydroxyisobutyryl-CoA hydrolase gene could synthesize enantiomerically pure S3HB to the concentration of 0.61 g l(-1) from 20 g l(-1) of glucose in Luria-Bertani medium. Fed-batch cultures of recombinant E. coli BL21 (DE3) codon plus were carried out to achieve higher titer of S3HB with varying induction time and glucose concentration during fermentation. Protein expression was induced by addition of 1 mM IPTG when cell concentration reached 10 and 20 g l(-1) (OD(600) = 30 and 60), respectively. When protein expression was induced at 60 of OD(600) and glucose was fed to the concentration of 15 g l(-1), 10.3 g l(-1) of S3HB was obtained in 38 h with the S3HB productivity of 0.21 g l(-1)h(-1). Lowering glucose concentration to 5 g l(-1) and induction of protein expression at 30 of OD(600) significantly reduced final S3HB concentration to 3.7 g l(-1), which also resulted in the decrease of the S3HB productivity to 0.05 g l(-1)h(-1).     

Characteristics of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) production byRalstonia eutropha NCIMB 11599 and ATCC 17699

Ralstonia eutropha NCIMB 11599 and ATCC 17699 were grown, and their productions of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] compared. In flask cultures ofR. eutropha NCIMB 11599, cell concentration, P(3HB-co-4HB) concentration and polymer content decreased considerably with increases in the γ-butyrolactone concentration, and the 4HB fraction was also very low (maximum 1.74 mol%). In fed-batch cultures ofR. eutropha NCIMB 11599, glucose and γ-butyrolactone were fed as the carbon sources, under a phosphate limitation strategy. When glucose was fed as the sole carbon source, with its concentration controlled using an on-line glucose analyzer, 86% of the P(3HB) homopolymer was obtained from 201 g/L of cells. In a two-stage fed-batch culture, where the cell concentration was increased to 104 g/L, with glucose fed in the first step and constant feeding of γ-butyrolactone, at 6 g/h, in the second, final cell concentration at 67 h was 106 g/L, with a polymer content of 82%, while the 4HB fraction was only 0.7 mol%. When the same feeding strategy was applied to the fedbatch culture ofR. eutropha ATCC 17699, where the cell concentration was increased to 42 g/L, by feeding fructose in the first step and γ-butyrolactone (1.5 g/h) in the second, the final cell concentration, polymer content and 4HB fraction at 74 h were 51 g/L, 35% and 32 mol%, respectively. In summary,R. eutropha ATCC 17699 was better thanR. eutropha NCIMB 11599 in terms of P(3HB-co-4HB) production with various 4HB fractions.     

利用重组大肠杆菌产聚-4-羟基丁酸的研究

重组大肠杆菌 E.coli XL-1 Blue（pKSSE5.3）携带Ralstonia　eutropha　H16的 PHA聚合酶基因（phaC）和Clostridium kluyveri的4-羟基丁酸:CoA转移酶基因（orfZ）,可以利用葡萄糖和4-羟基丁酸为碳源合成均聚的聚-4-羟基丁酸[P（4HB）]。优化培养基和培养条件后,进行了补料分批培养。结果表明,经68h左右培养,E.coli XL-1 Blue（pKSSE5.3）的发酵液中菌体干重达13g/L,P（4HB）的密度达5g/L,P（4HB）百分含量为36％。从收获的冻干细胞中提纯得到40g均聚的P（4HB）,为进一步分析检测P（4HB）生物、理化、加工特性及其应用价值成为可能。     

The production of poly(3-hydroxybutyrate) [P(3HB)] by a newly isolated Bacillus sp. ST1C using liquid waste from biodiesel production

A newly isolated poly(3-hydroxybutyrate) [P(3HB)] producing strain, ST1C, was identified as Bacillus aryabhattai based on its morphological, biochemical and molecular characteristics. It synthesized and accumulated relatively high amounts of P(3HB). The aim of this work was to establish if it could convert an inexpensive liquid waste product from the production of biodiesel, biodiesel liquid waste (BLW), to P(3HB). Using a mineral salt medium (MSM) containing 2.0 % (v/v) glycerol present in the BLW and both normal batch and a draw and fill culture method, B. aryabhattai ST1C produced a maximum P(3HB) content and biomass concentration of 72.31 % dry cell weight (DCW) and 7.24 g/L, respectively, over a 24 h cultivation period in the draw and fill cultivation method. From 24 h to the end of cultivation at 72 h both the P(3HB) content and the biomass concentrations continuously reduced. Concentrations of glycerol in the BLW in this MSM above 3.0 % (v/v) or from pure glycerol (PG) or with an added NaCl concentration of greater than 3.0 % significantly reduced both the maximum P(3HB) content and the biomass concentrations.     

Microbial production of 4-hydroxybutyrate,poly-4-hydroxybutyrate,and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by recombinant microorganisms

4-Hydroxybutyrate (4HB) was produced by Aeromonas hydrophila 4AK4, Escherichia coli S17-1, or Pseudomonas putida KT2442 harboring 1,3-propanediol dehydrogenase gene dhaT and aldehyde dehydrogenase gene aldD from P. putida KT2442 which are capable of transforming 1,4-butanediol (1,4-BD) to 4HB. 4HB containing fermentation broth was used for production of homopolymer poly-4-hydroxybutyrate [P(4HB)] and copolymers poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-4HB)]. Recombinant A. hydrophila 4AK4 harboring plasmid pZL-dhaT-aldD containing dhaT and aldD was the most effective 4HB producer, achieving approximately 4 g/l 4HB from 10 g/l 1,4-BD after 48 h of incubation. The strain produced over 10 g/l 4HB from 20 g/l 1,4-BD after 52 h of cultivation in a 6-L fermenter. Recombinant E. coli S17-1 grown on 4HB containing fermentation broth was found to accumulate 83 wt.% of intracellular P(4HB) in shake flask study. Recombinant Ralstonia eutropha H16 grew to over 6 g/l cell dry weight containing 49 wt.% P(3HB-13%4HB) after 72 h.     

Production of poly(3-hydroxybutyric acid) by fed-batch culture of Alcaligenes eutrophus with glucose concentration control

Alcaligenes eutrophus NCIMB 11599 was cultivated to produce poly(3-hydroxybutyric acid) (PHB) from glucose by the automatic fed-batch culture technique. The glucose concentration of the culture broth was controlled at 10 to 20 g/L by two methods: using exit gas data obtained from a mass spectrometer and using an on-line glucose analyzer. The effect of ammonium limitation on PHB synthesis at different culture phases was studied. The final cell concentration, PHB concentration, and PHB productivity increased as ammonia feeding was stopped at a higher cell concentration. High concentrations of PHB (121 g/L) and total cells (164 g/L) were obtained in 50 h when ammonia feeding was stopped at the cell concentration of 70 g/L. The maximum PHB content reached 76% of dry cell weight and the productivity was 2.42 g/L h with the yield of 0.3 g PHB/g glucose.     

Production of poly(3-hydroxybutyrate) by high cell density fed-batch culture of Alcaligenes eutrophus with phospate limitation

High cell density fed-batch fermentation of Alcaligenes eutrophus was carried out for the production of poly(3-hydroxybutyrate) (PHB) in a 60-L fermentor. During the fermentation, pH was controlled with NH(4)OH solution and PHB accumulation was induced by phosphate limitation instead of nitrogen limitation. The glucose feeding was controlled by monitoring dissolved oxygen (DO) concentration and glucose concentration in the culture broth. The glucose concentration fluctuated within the range of 0-20 g/L. We have investigated the effect of initial phosphate concentration on the PHB production when the initial volume was fixed. Using an initial phosphate concentration of 5.5 g/L, the fed-batch fermentation resulted in a final cell concentration of 281 g/L, a PHB concentration of 232 g/L, and a PHB productivity of 3.14 g/L . h, which are the highest values ever reported to date. In this case, PHB content, cell yield from glucose, and PHB yield from glucose were 80, 0.46, and 0.38% (w/w), respectively. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55: 28-32, 1997.     

Production of poly(3-hydroxybutyric acid-co-4-hydroxybutyric acid) and poly(4-hydroxybutyric acid) without subsequent degradation by Hydrogenophaga pseudoflava

A Hydrogenophaga pseudoflava strain was able to synthesize poly(3-hydroxybutyric acid-co-4-hydroxybutyric acid) [P(3HB-co-4HB)] having a high level of 4-hydroxybutyric acid monomer unit (4HB) from gamma-butyrolactone. In a two-step process in which the first step involved production of cells containing a minimum amount of poly(3-hydroxybutyric acid) [P(3HB)] and the second step involved polyester accumulation from the lactone, approximately 5 to 10 mol% of the 3-hydroxybutyric acid (3HB) derived from the first-step culture was unavoidably reincorporated into the polymer in the second cultivation step. Reincorporation of the 3HB units produced from degradation of the first-step residual P(3HB) was confirmed by high-resolution 13C nuclear magnetic resonance spectroscopy. In order to synthesize 3HB-free poly(4-hydroxybutyric acid) [P(4HB)] homopolymer, a three-stage cultivation technique was developed by adding a nitrogen addition step, which completely removed the residual P(3HB). The resulting polymer was free of 3HB. However, when the strain was grown on gamma-butyrolactone as the sole carbon source in a synthesis medium, a copolyester of P(3HB-co-4HB) containing 45 mol% 3HB was produced. One-step cultivation on gamma-butyrolactone required a rather long induction time (3 to 4 days). On the basis of the results of an enzymatic study performed with crude extracts, we suggest that the inability of cells to produce 3HB in the multistep culture was due to a low level of 4-hydroxybutyric acid (4HBA) dehydrogenase activity, which resulted in a low level of acetyl coenzyme A. Thus, 3HB formation from gamma-butyrolactone is driven by a high level of 4HBA dehydrogenase activity induced by long exposure to gamma-butyrolactone, as is the case for a one-step culture. In addition, intracellular degradation kinetics studies showed that P(3HB) in cells was completely degraded within 30 h of cultivation after being transferred to a carbon-free mineral medium containing additional ammonium sulfate, while P(3HB-co-4HB) containing 5 mol% 3HB and 95 mol% 4HB was totally inert in interactions with the intracellular depolymerases. Intracellular inertness could be a useful factor for efficient synthesis of the P(4HB) homopolymer and of 4HB-rich P(3HB-co-4HB) by the strain used in this study.