Plasticizing effect of 1-allyl-3-methylimidazolium chloride in cellulose acetate based polymer electrolytes

1-Allyl-3-methylimidazolium chloride, [Amim] Cl was used to improve the stability and disrupt the crystallinity of the matrix formed between cellulose acetate (CA) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) by solution casting technique. The sample composition of CA:LiTFSI:[Amim] Cl (14 wt.%:6 wt.%:80 wt.%) exhibits the highest ionic conductivity and has greater ability to retain minimum reduction value of 1.75 × 10⁻³ S cm⁻¹ even after 30 days of storage at room temperature. Increase in [Amim] Cl doping induces greater structural disorderliness which is revealed by the XRD analysis. This is due to the complexation between the added constituents evident from the variation in FTIR spectra. The relaxation time of Li⁺ ions is reduced due to the increase in amorphous region as observed by the shift of loss tangent peaks to higher frequencies and thus enhancing the ionic conductivity.     

Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste

Astaxanthin, as an outstanding antioxidant reagent, was successfully extracted from shrimp waste by the ionic liquids based ultrasonic-assisted extraction. Seven kinds of imidazolium ionic liquids with different cations and anions were investigated in this work and one task-specific ionic liquid in ethanol with 0.50 mol L⁻¹ was selected as the solvent. At the optimized ultrasonic extraction conditions, the extraction amount of astaxanthin increased 98% (92.7 μg g⁻¹) compared to the conventional method (46.7 μg g⁻¹). Furthermore, the extracted solution was isolated through the solid-phase extraction with a molecularly imprinted polymer sorbent. After loading the samples on molecularly imprinted polymer cartridge, the different washing and elution solvents, such as water, methanol, n-hexane, acetone and dichloromethane, were evaluated, and finally, astaxanthin was separated from the shrimp waste extract.     

Does scope for growth change as a result of salinity stress in the amphipod Gammarus oceanicus?

Physiological performance (feeding, metabolism, growth and excretion) across a broad range of salinity (5-30 psu) were determined for the benthic amphipod Gammarus oceanicus, a species of marine origin inhabiting brackish waters of the southern Baltic Sea. Feeding rates decreased with increasing salinity, whereas the nutritive absorption efficiency increased. Faeces production and ammonia excretion rates decreased strongly from the lowest to the highest salinity by 60% and 58%, respectively. Increasing salinity was accompanied by a reduction in the metabolic rate from 438 J g^− 1 dry wt d^− 1 (5.1 mW g^− 1) at 5 psu to 245 J g^− 1 (2.8 mW g^− 1) at 30 psu. Individuals were able to maintain a positive energy balance at all experimental salinities. The greatest values for scope for growth were recorded at the environmental salinity (7 psu) with a mean of 769 J g^− 1 dry wt d^− 1 (8.7 mW g^− 1).     

X-ray and spectroscopy studies of antisymbiotic effect O-coordination of the 4-methoxy benzoyl methylene triphenyl phosphorane ligand in palladium(II) complex

Complex [Pd(C₆H₄CH₂NH₂-k²-C,N)(Py)(OC (MeO-4-C₆H₄)CH-PPh₃)]OTf (1) (OTf = CF3SO3) represents the example of an ylide O-bound to a Pd(II) center that is unusual for the classical soft metals. O-coordination of ylides and cisoid structure of complex was demonstrated by single-crystal X-ray analyses and spectroscopy. The IR and NMR data of the product (1), formed by the reaction of Pd(II) with the same ylide, are similar to those of O-bounded ylide. Analytical data indicate a 1:1 stoichiometry between the ylide and Pd (II) in the product (1). The molar conductivity of (1) Λ = 175 Ω⁻¹ mol⁻¹ cm² is within the range for 1:1electrolytes.     

Transmembrane ion distribution during recovery from freezing in the woolly bear caterpillar Pyrrharctia isabella (Lepidoptera: Arctiidae)

During extracellular freezing, solutes in the haemolymph are concentrated, resulting in osmotic dehydration of the cells, which must be reversed upon thawing. Here, we used freeze tolerant Pyrrharctia isabella (Lepidoptera: Arctiidae) larvae to examine the processes of ion redistribution after thawing. To investigate the effect of the intensity of cold exposure on ion redistribution after thawing, we exposed caterpillars to −14 °C, −20 °C or −30 °C for 35 h. To investigate the effect of duration of cold exposure on ion redistribution after thawing, we exposed the caterpillars to −14 °C for up to 6 weeks while sampling several time points. The concentrations of Na⁺, K⁺, Mg²⁺ and Ca²⁺ were measured after thawing in the haemolymph, fat body, muscle, midgut tissue and hindgut tissue. Being frozen for long durations (>3 weeks) or at low temperatures (−30 °C) both result in 100% mortality, although different ions and tissues appear to be affected by each treatment. Both water distribution and ion content changes were detected after thawing, with the largest effects seen in the fat body and midgut tissue. Magnesium homeostasis appears to be vital for post-freeze survival in these larvae. The movement of ions during thawing lagged behind the movement of water, and ion homeostasis was not restored within the same time frame as water homeostasis. Failure to regain ion homeostasis after thawing is therefore implicated in mortality of freeze tolerant insects.     

Synthesis and characterization of a molecularly imprinted polymer and its application as SPE enrichment sorbent for determination of trace methimazole in pig samples using HPLC-UV

A novel molecularly imprinted polymer that could be applied as enrichment sorbent was prepared using methimazole (MMZ) as the template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker. Though evaluated by static, kinetic and competitive adsorption tests, the polymer exhibited high adsorption capacity, fast kinetics and good selective ability. A method for determination of trace MMZ was developed using this polymer as enrichment sorbent coupled with high performance liquid chromatography focusing on complex biological matrices. Under the optimum experimental conditions, the MMZ standard is linear within the concentration range studied, that is, from 0.5 μg L⁻¹ to 150 μg L⁻¹ (r² = 0.9941). Lower limits of detection (LOD, at S/N = 3) and quantification (LOQ, at S/N = 10) in pig samples were 0.63 μg kg⁻¹ and 2.10 μg kg⁻¹ for kidney, 0.51 μg kg⁻¹ and 1.70 μg kg⁻¹ for liver, 0.56 μg kg⁻¹ and 1.86 μg kg⁻¹ for muscle, respectively. Recoveries and relative standard deviation (RSD, n = 9) values for precision in the developed method were from 71.14% to 88.41% and from 2.53% to 6.18%.     

Multinuclear NMR and molecular modelling investigations on the structure and equilibria of complexes that form in aqueous solutions of Ca and gluconate

Complexation of d-gluconate (Gluc⁻) with Ca²⁺ has been investigated via ¹H, ¹³C and ⁴³Ca NMR spectroscopy in aqueous solutions in the presence of high concentration background electrolytes (1 M ? I ? 4 M (NaCl) ionic strength). From the ionic strength dependence of its formation constant, the stability constant at 6 ? pH ? 11 and at I → 0 M has been derived (). The protonation constant of Gluc⁻ at I = 1 M (NaCl) ionic strength was also determined and was found to be log K_a = 3.24 ± 0.01 (¹³C NMR) and log K_a = 3.23 ± 0.01 (¹H NMR). It was found that ¹H and ¹³C NMR chemical shifts upon complexation (both with H⁺ and with Ca²⁺) do not vary in an unchanging way with the distance from the Ca²⁺/H⁺ binding site. From 2D ¹H-⁴³Ca NMR spectra, simultaneous binding of Ca²⁺ to the alcoholic OH on C2 and C3 was deduced. Molecular modelling results modulated this picture by revealing structures in which the Gluc⁻ behaves as a multidentate ligand. The five-membered chelated initial structure was found to be thermodynamically more stable than that derived from a six-membered chelated initial structure.     

Decoupling the Ionic Conductivity and Elastic Modulus of Gel Electrolytes: Fully Zwitterionic Copolymer Scaffolds in Lithium Salt/Ionic Liquid Solutions

A critical barrier to overcome in the development of solid‐state electrolytes for lithium batteries is the trade‐off between sacrificing ionic conductivity for enhancement of mechanical stiffness. Here, a physically cross‐linked, polymer‐supported gel electrolyte consisting of a lithium salt/ionic liquid solution featuring a fully zwitterionic (ZI) copolymer network is introduced for rechargeable lithium‐based batteries. The ZI scaffold is synthesized using a 3:1 molar ratio of 2‐methacryloyloxyethyl phosphorylcholine and sulfobetaine vinylimidazole, and the total polymer content is varied between 1.1 and 12.5 wt%. Room‐temperature ionic conductivity values comparable to the base liquid electrolyte (≈1 mS cm^?1) are achieved in ZI copolymer‐supported gels that display compressive elastic moduli as large as 14.3 MPa due to ZI dipole–dipole cross‐links. Spectroscopic characterization suggests a change in the Li⁺ coordination shell upon addition of the zwitterions, indicative of strong Li⁺···ZI group interactions. Li⁺ transference number measurements reveal an increase in Li⁺ conductivity within a ZI gel electrolyte ( nearly doubles). ZI gels display enhanced stability against Li metal, dendrite suppression, and suitable charge–discharge performance in a graphite|lithium nickel cobalt manganese oxide cell. Fully ZI polymer networks in nonvolatile, ionic liquid‐based electrolytes represent a promising approach toward realizing highly conductive, mechanically rigid gels for lithium battery technologies.     

LXRβ deficient mice have reduced hepatic insulin clearance during hyperinsulinemic euglucemic clamp

The present study addresses the insulin sensitivity in mice deficient in LXRβ (LXRβ^−/−) as well as in wild type (wt) mice assessed by hyperinsulinemic euglycemic clamp. Wt and LXRβ^−/− mice were fed either a normal chow diet or a high fat and high cholesterol diet (HFCD), and insulin sensitivity was assessed by hyperinsulinemic euglycemic clamps. We show that LXRβ^−/− mice have reduced insulin clearance during hyperinsulinemic clamps upon feeding both HFCD and a regular chow diet. Moreover we also observed reduced hepatic inflammation in LXRβ^−/− mice compared to wt mice upon feeding an HFCD, despite equal levels of hepatic steatosis. In summary, our results indicate that LXRβ^−/− mice have reduced insulin clearance during hyperinsulinemic euglycemic clamps and also reduced hepatic inflammation upon feeding an HFCD for 26 weeks.     

Growth and annual production of the brown alga Laminaria japonica (Phaeophyta, Laminariales) introduced into the Uwa Sea in southern Japan

The brown alga Laminaria japonica is distributed from southern Hokkaido to the northeastern Honshu in Japan. Recently, aquaculture of L. japonica has expanded to the southern coast of Japan and to China along the East China Sea. In order to elucidate the growth, biomass and productivity of L. japonica in a subtropical area, we cultivated and examined it in the Uwa Sea, in southwestern Japan over a period of 2 years. The seawater temperature ranged from 13.8 to 26.8 °C in 2001/2002 and from 13.1 to 27.2 °C in 2002/2003. In 2001/2002, the maximum density, maximum mean length and maximum mean wet wt. of L. japonica were 59.7 ± 28.0 ind. 50 cm^− 1 (mean ± S.D.), 187.5 ± 82.7 cm (360 cm in the largest individual) and 130.1 ± 94.6 g wet wt., respectively. In 2002/2003, these values were 94.7 ± 22.2 ind. 50 cm^− 1, 159.3 ± 74.4 cm (300 cm in the largest individual) and 95.2 ± 69.5 g wet wt., respectively. Thus, the length and weight increased when the density was low (2001/2002), and the length and weight decreased when the density was high (2002/2003). The maximum biomass was estimated to be 7200 ± 3400 g wet wt. 50 cm^− 1 in 2001/2002 and 7300 ± 2000 g wet wt. 50 cm^− 1 in 2002/2003. Annual production was estimated to be 33.3 kg wet wt. m^− 1 year^− 1 in 2001/2002 and 34.0 kg wet wt. m^− 1 year^− 1 in 2002/2003. The present study indicates that the annual production of L. japonica per rope of 1 m at Uwajima Bay, the Uwa Sea corresponded to 1.1-2.2 m² of that of Hokkaido in their native area. Thus, the present study indicates that L. japonica is highly adaptable because it is able to keep a high level of productivity when grown in water with a high temperature.     

Age-related intramuscular pharmacokinetics of cefquinome in sheep

The pharmacokinetic profile of cefquinome was studied in one, six-months and one year old sheep following a single intramuscular doses of 1 and 10 mg kg⁻¹ b.wt. Cefquinome concentrations in serum were determined by microbiological assay technique using Micrococcus luteus (ATCC 9341) as test organism. Following intramuscular administration of cefquinome, the absorption half-lives (t_0.5(ab)) were 1.540, 1.037 and 0.664 h at a dose of 1 mg kg⁻¹ b.wt. and 1.844, 1.290 and 1.605 h at a dose of 10 mg kg⁻¹ b.wt. in the three ages, respectively. After the two doses, the maximum serum concentrations (C_max) of 0.732, 1.145, 1.205 and 3.525, 5.088, 4.576 μg ml⁻¹ were attained after (t_max) of 3.812, 3.029, 2.174 and 3.785, 2.824, 3.095 h in the three ages, respectively. The elimination half-life (t_0.5(el)) and MRT values of cefquinome were longer in one-month old sheep compared to six-months old and yearling sheep. The absorption and elimination processes were delayed in newborn sheep of one-month old in contrary to six-month and yearling animals. The in vitro serum protein-binding tendencies were 8.254%, 11.586% and 13.002%, for one, six-months and one year old sheep, respectively. Based on this study and economically, an optimal intramuscular dosage regimen of cefquinome would be 1 mg kg⁻¹ once daily in one-month, six-months and one-year old sheep to achieve and maintain the therapeutic serum levels within safe limits.     

Primary production,respiration and calcification of the temperate free-living coralline alga Lithothamnion corallioides

Calcification and primary production responses to irradiance in the temperate coralline alga Lithothamnion corallioides were measured in summer 2004 and winter 2005 in the Bay of Brest. Coralline algae were incubated in dark and clear bottles exposed to different irradiances. Net primary production reached 1.5 μmol C g⁻¹ dry wt h⁻¹ in August and was twice as high as in January–February. Dark respiration showed significant seasonal variations, being three-fold higher in summer. Maximum calcification varied from 0.6 μmol g⁻¹ dry wt h⁻¹ in summer 2004 to 0.4 μmol g⁻¹ dry wt h⁻¹ in winter 2005. According to P–E curves and the daily course of irradiance, estimated daily net production and calcification reached 131 μg C g⁻¹ dry wt and 970 μg CaCO₃ g⁻¹ dry wt in summer 2004, and 36 μg C g⁻¹ dry wt and 336 μg CaCO₃ g⁻¹ dry wt in winter 2005. The net primary production of natural L. corallioides populations in shallow waters was estimated at 10–600 g C m⁻² y⁻¹, depending on depth and algal biomass. The mean annual calcification of L. corallioides populations varied from 300 to 3000 g CaCO₃ m⁻². These results are similar to those reported for tropical coralline algae in terms of carbon and carbonate productivity. Therefore, L. corallioides can be considered as a key element of carbon and carbonate cycles in the shallow coastal waters where they live.     

One-step immobilization of antibodies for α-1-fetoprotein immunosensor based on dialdehyde cellulose/ionic liquid composite

A novel immunosensor for α-1-fetoprotein based on dialdehyde cellulose/ionic liquid composite film as a matrix has been developed. Microcrystalline cellulose was activated by sodium metaperiodate to produce dialdehyde cellulose. Antibodies can be immobilized on the electrode by a one-step method through covalent bonding of the aldehyde groups of dialdehyde cellulose with the amino groups of antibodies, in which no additional chemical cross-linking step is required. Moreover, ionic liquid added can improve the conductivity of the sensing interface and, therefore, can enhance the electrochemical signal. In this work, α-1-fetoprotein was detected within the range from 0.1 to 60 ng ml⁻¹ with a detection limit of 0.07 ng ml⁻¹ (signal/noise = 3). The proposed immunosensor had good specificity and reproducibility. It was used to determine real samples with satisfactory results.     

In situ preparation of magnetic Fe3O4-chitosan nanoparticles for lipase immobilization by cross-linking and oxidation in aqueous solution

A new and simple method has been proposed to prepare magnetic Fe₃O₄-chitosan (CS) nanoparticles by cross-linking with sodium tripolyphosphate (TPP), precipitation with NaOH and oxidation with O₂ in hydrochloric acid aqueous phase containing CS and Fe(OH)₂, and these magnetic CS nanoparticles were used to immobilize lipase. The effects on the sequence of adding NaOH and TPP, the reaction temperature, and the ratio of CS/Fe(OH)₂ were studied. TEM showed that the diameter of composite nanoparticles was about 80 nm, and that the magnetic Fe₃O₄ nanoparticles with a diameter of 20 nm were evenly dispersed in the CS materials. Magnetic measurement revealed that the saturated magnetisation of the Fe₃O₄-CS nanoparticles could reach 35.54 emu/g. The adsorption capacity of lipase onto nanoparticles could reach 129 mg/g; and the maximal enzyme activity was 20.02 μmol min⁻¹ mg⁻¹ (protein), and activity retention was as high as 55.6% at a certain loading amount.     

Anation kinetics of pentacyanoaquachromate(III) by thiocyanate and azide

The kinetics of the reaction of Cr(CN)₅(H₂O)²⁻ with NCS⁻ and were studied at pH 5.0 and at pH 6.3-7.0, respectively, as a function of the temperature between 25.0 and 55.0 °C, and at various ionic strengths. Anation occurs in competition with aquation of CN⁻, with rate constants that exhibit less-than-first-order dependence on the concentration of the entering anions. The results are interpreted in terms of ligand interchange in a context of association of the two reacting anions mediated by the Na⁺ or Ca²⁺ counterions. The degree of aggregation depends mainly on the total cationic charge rather than on the ionic strength, and is ca. 2-fold larger for than for NCS⁻. Within the associated species, is a better entering ligand than NCS⁻ by a factor of 4.5. The Cr(CN)₅(NCS)³⁻ and Cr(CN)₅(N₃)³⁻ complexes were also synthesized, and the rates of aquation of NCS⁻ and were measured at pH 5.0 and between 55.0 and 80.0 °C, over the same range of ionic strengths. The ionic strength enhances the anation rates but has little effect on the aquation rates. The average activation enthalpies of the interchange step are 80 ± 3 and 76 ± 3 kJ mol⁻¹ for entry of NCS⁻ and , respectively. Those of the corresponding aquation reactions are 94 ± 4 and 107 ± 4 kJ mol⁻¹. Within error limits, all ΔH^‡ values are independent of the ionic strength. The results are consistent with an I_d mechanism for substitution in Cr(CN)₅X^z− complexes.     

A facile one-pot synthesis of a fluorescent agarose-O-naphthylacetyl adduct with slow release properties

A microwave assisted facile synthesis of a fluorescent 6-O-naphthylacetyl agarose (NA-agarose) employing carbodiimide chemistry (dicyclohexylcarbodiimide/4-dimethylaminopyridine) has been described. NA-agarose was characterized by TGA, GPC, UV spectrophotometry, fluorescence spectroscopy, FT-IR, ¹H and ¹³C NMR spectra, exhibiting that in NA-agarose the naphthylacetyl group was attached to the backbone of the agarose polymer. The hydrolysis of NA-agarose in heterogeneous aqueous phase showed that the 1-naphthyl acetic acid (NAA), a plant growth regulator, got released in a controlled manner, the release rate being dependent on the hydrophilicity of the polymer adduct as well as on pH and temperature. The fluorescence emission (λ_max 332 nm) of NA-agarose (1 × 10⁻³ M) in ethylene glycol was significantly higher (ca. 82%) than that of the molar equivalent of NAA content in the product i.e. 0.08 mg in 1 × 10⁻³ M solution. The resulting polymer would be of potential utility as a sustained release plant growth regulator and sensory applications.     

Detoxification of sulfur mustard by enzyme-catalyzed oxidation using chloroperoxidase

One of the most interesting methods for the detoxification of sulfur mustard is enzyme-catalyzed oxidation. This study examined the oxidative destruction of a sulfur mustard by the enzyme chloroperoxidase (EC 1.11.1.10). Chloroperoxidase (CPO) belongs to a group of enzymes that catalyze the oxidation of various organic compounds by peroxide in the presence of a halide ion. The enzymatic oxidation reaction is affected by several factors: pH, presence or absence of chloride ion, temperature, the concentrations of hydrogen peroxide and enzyme and aqueous solubility of the substrate. The optimum reaction conditions were determined by analyzing the effects of all factors, and the following conditions were selected: solvent, Britton–Robinson buffer (pH = 3) with tert-butanol (70:30 v/v); CPO concentration, 16 U/mL; hydrogen peroxide concentration, 40 mmol/L; sodium chloride concentration, 20 mmol/L. Under these reaction conditions, the rate constant for the reaction is 0.006 s⁻¹. The Michaelis constant, a measure of the affinity of an enzyme for a particular substrate, is 1.87 × 10⁻³ M for this system. The Michaelis constant for enzymes with a high affinity for their substrate is in the range of 10⁻⁵ to 10⁻⁴ M, so this value indicates that CPO does not have a very high affinity for sulfur mustard.     

Mechanistic studies on monodentate-ligand substitution of five-coordinate trigonal-bipyramidal platinum (II) complexes with tris[2-(diphenylphosphino)ethyl]phosphine

Reaction of the five-coordinate trigonal-bipyramidal platinum(II) complex, [Pt(pt)(pp₃)](BF₄) (pt = 1-propanethiolate, pp₃ = tris[2-(diphenylphosphino)ethyl]phosphine), with I⁻ in chloroform gave the five-coordinate square-pyramidal complex with a dissociated terminal phosphino group and an apically coordinated iodide ion in equilibrium. The thermodynamic parameters for the equilibrium between the trigonal-bipyramidal and square-pyramidal geometries, [Pt(pt)(pp₃)]⁺ + I⁻ ? [PtI(pt) (pp₃)], and the kinetic parameters for the chemical exchange were obtained as follows: , ΔH⁰ = − 10 ± 2.4 kJ mol⁻¹, ΔS⁰ = − 36 ± 10 J K⁻¹ mol⁻¹, , ΔH^‡ = 34 ± 4.7 kJ mol⁻¹, ΔS^‡ = − 50 ± 21 J K⁻¹ mol⁻¹. The square-planar trinuclear platinum(II) complex was formed by bridging reaction of one of the terminal phosphino groups of trigonal-bipyramidal [PtCl(pp₃)]Cl with trans-[PtCl₂(NCC₆H₅)₂] in chloroform. From these facts, ligand substitution reactions of [PtX(pp₃)]⁺ (X = monodentate anion) are expected to proceed via an intermediate with a dissociated phosphino group. The rate constants for the chloro-ligand substitution reactions of [PtCl(pp₃)]⁺ with Br⁻ and I⁻ in chloroform approached the respective limiting values as concentrations of the entering halide ions are increased. These kinetic results confirmed the preassociation mechanism in which the square pyramidal intermediate with a dissociated phosphino group and an apically coordinated halide ion is present in the rapid pre-equilibrium.     

Solid Polymer Electrolytes with Enhanced Electrochemical Stability for High-Capacity Aluminum Batteries

Chloroaluminate ionic liquids are commonly used electrolytes in rechargeable aluminum batteries due to their ability to reversibly electrodeposit aluminum at room temperature. Progress in aluminum batteries is currently hindered by the limited electrochemical stability, corrosivity, and moisture sensitivity of these ionic liquids. Here, a solid polymer electrolyte based on 1-ethyl-3-methylimidazolium chloride-aluminum chloride, polyethylene oxide, and fumed silica is developed, exhibiting increased electrochemical stability over the ionic liquid while maintaining a high ionic conductivity of ≈13 mS cm⁻¹. In aluminum–graphite cells, the solid polymer electrolytes enable charging to 2.8 V, achieving a maximum specific capacity of 194 mA h g⁻¹ at 66 mA g⁻¹. Long-term cycling at 2.7 V showed a reversible capacity of 123 mA h g⁻¹ at 360 mA g⁻¹ and 98.4% coulombic efficiency after 1000 cycles. Solid-state nuclear magnetic resonance spectroscopy measurements reveal the formation of five-coordinate aluminum species that crosslink the polymer network to enable a high ionic liquid loading in the solid electrolyte. This study provides new insights into the molecular-level design and understanding of polymer electrolytes for high-capacity aluminum batteries with extended potential limits.     

Cation effect on energy transfer reactions from [Tb(2,6-pyridinedicarboxylate)3] to anionic chromium(III) and neodymium(III) complexes in aqueous solutions

Cation effects are studied on the excitation energy transfer reaction between anionic complexes, i.e., [Tb(dpa)₃]³⁻ (dpa=2,6-pyridinedicarboxylate) quenched by [Cr(ox)₃]³⁻ (ox=oxalate ion), [Cr(mal)₃]³⁻ (mal=malonate ion) and [Nd(dpa)₃]³⁻ in aqueous solutions in the presence of alkali metal ions added for adjustments of ionic strengths. In the quenching reaction of [Cr(ox)₃]³⁻, magnitudes of quenching rate constants (k_q) and energy transfer rate constant in encounter complex (k₁) are changed by the cations in the order of Li⁺ < Na⁺ < K⁺ ≈ Rb⁺ ≈ Cs⁺, that is quite contrary of the cation effect on energy transfer reaction between [Ru(N-N)₃]²⁺ and [Cr(ox)₃]³⁻, reported in the previous paper. On the other hand, the rate constants in quenching reactions by [Cr(mal)₃]³⁻ and [Nd(dpa)₃]³⁻ remain almost constant. This result indicates that more separated donor-acceptor pair is not sensitive to coexisting cations.