Crosslinking of Chitosan with Dialdehyde Derivatives of Nucleosides and Nucleotides. Mechanism and Comparison with Glutaraldehyde

In medical and pharmaceutical applications, chitosan is used as a component of hydrogels–macromolecular networks swollen in water. Chemical hydrogels are formed by covalent links between the crosslinking reagents and amino functionalities of chitosan. To date, the most commonly used chitosan crosslinkers are dialdehydes, such as glutaraldehyde (GA). We have developed novel GA like crosslinkers with additional functional groups–dialdehyde derivatives of uridine (oUrd) and nucleotides (oUMP and oAMP)–leading to chitosan-based biomaterials with new properties. The process of chitosan crosslinking was investigated in details and compared to crosslinking with GA. The rates of crosslinking with oUMP, oAMP, and GA were essentially the same, though much higher than in the case of oUrd. The remarkable difference in the crosslinking properties of nucleoside and nucleotide dialdehydes can be clearly attributed to the presence of the phosphate group in nucleotides that participates in the gelation process through ionic interactions with the amino groups of chitosan. Using NMR spectroscopy, we have not observed the formation of aldimine bonds. It can be concluded that the real number of crosslinks needed to cause gelation of chitosan chains may be less than 1%.     

Kinetic and mechanistic considerations in the gelation of genipin-crosslinked gelatin

The gelling properties (gel time (t_gel) and gel strength) of a 10% (w/w) gelatin sol were investigated as a function of genipin (GP) concentration (0–15 mM) and temperature (25–55 °C) to discern mechanisms and optimal conditions for fixation. Gel time increased with increasing temperature, reached a maximum, and then declined as temperature was raised further. By contrast, network strength data followed the opposite trend. From the thermal behavior of t_gel and network strength, it was inferred that gelation in the low-temperature regime was dominated by hydrogen bonding, while in the high-temperature regime it was dominated by covalent crosslinking. At higher temperatures, crosslinking was described by an Arrhenius rate law expression, with activation energies between 63.2 and 67.8 kJ/mol, depending on GP concentration. In the low temperature regime, an Arrhenius plot resulted in negative activation energies of −75.8 and −64.4 kJ/mol in the presence of 10 and 15 mM GP, respectively. With an increase in both GP concentration and temperature, the gelatin network gradually shifted from being dominated by hydrogen bonds (physical crosslinks) to covalent crosslinking (chemical crosslinks).     

Rheology and dynamic light scattering of octa-ethyleneglycol-monododecylether/chitosan solutions

In this work we used rheometry and DLS to probe relaxation phenomena in solutions of chitosan and octa-ethyleneglycol-monododecylether. The dispersions had a marked pseudoplastic behavior, which became less evident, as surfactant concentration was increased. Arrhenius plots showed that systems with surfactant presented a characteristic temperature at which apparent enthalpy of activation (varying from 3 to 40 kJ mol⁻¹) changed: this change was correlated to a possible transition of colloidal aggregates to a wormlike configuration. DLS intensity correlation functions were described by KWW equation: pure chitosan solutions had relaxation rate distributions centered at a characteristic relaxation rate around 4.6 × 10⁻⁶ μS⁻¹; as surfactant was added, a new component, with a faster characteristic relaxation rate with a magnitude order of 10⁻³ μs⁻¹, appeared. It was shown that the dependence between these relaxation rates and surfactant concentration could be used to describe DLS-related relaxation phenomena as an Arrhenius-activated process, agreeing with results obtained using rheometry.     

Chitosan nanogels by template chemical cross-linking in polyion complex micelle nanoreactors

Chitosan covalent nanogels cross-linked with genipin were prepared by template chemical cross-linking of chitosan in polyion complex micelle (PIC) nanoreactors. By using this method, we were able to prepare chitosan nanogels using only biocompatible materials without organic solvents. PIC were prepared by interaction between chitosan (X(n) = 23, 44, and 130) and block copolymer poly(ethylene oxide)-block-poly[sodium 2-(acrylamido)-2-methylpropanesulfonate] (PEO-b-PAMPS) synthesized by single-electron transfer-living radical polymerization (SET-LRP). PIC with small size (diameter about 50 nm) and low polydispersity were obtained up to 5 mg/mL. After cross-linking of chitosan with genipin, the nanoreactors were dissociated by adding NaCl. The dissociation of the nanoreactors and the formation of the nanogels were confirmed by (1)H NMR, DLS, and TEM. The size of the smallest nanogels was about 50 nm in the swollen state and 20 nm in the dry state. The amount of genipin used during reticulation was an important parameter to modulate the size of the nanogels in solution.     

Stress relaxation function of bone and bone collagen

Relaxation Young's and shear moduli of bovine bone and bone collagen were investigated. It was found that each relaxation process observed had two stages, which were referred to as process I and process II in order of time. Process II was described by a simple exponential decay while process I was not. The Kohlrausch-Williams-Watts (KWW) function, ψ(t) = exp[t/τ₁)^B] (0 < B < 1), was found to be suitable to describe process I. The normalized relaxation modulus, M_r(t), was expressed by the combination of the simple exponential type relaxation function and the KWW function

M_r=A₁exp[−(t/τ₁)^B]+A₂exp[(t/τ₁)](0<B1)

On the basis of this equation, the relaxation mechanism in bone and bone collagen was identified. According to the model proposed for the KWW relaxation function, the stress relaxation process in bone was considered to be governed by viscoelastic properties of matrix collagen fiber. The model for the KWW relaxation function requires the disordered glassy structure of collagen fiber, which is consistent with the results of the structural investigations.     

Human-derived NLS enhance the gene transfer efficiency of chitosan

Nuclear import is considered as one of the major limitations for non-viral gene delivery systems and the incorporation of nuclear localization signals (NLS) that mediate nuclear intake can be used as a strategy to enhance internalization of exogenous DNA.In this work, human-derived endogenous NLS peptides based on insulin growth factor binding proteins (IGFBP), namely IGFBP-3 and IGFBP-5, were tested for their ability to improve nuclear translocation of genetic material by non-viral vectors. Several strategies were tested to determine their effect on chitosan mediated transfection efficiency: co-administration with polyplexes, co-complexation at the time of polyplex formation, and covalent ligation to chitosan. Our results show that co-complexation and covalent ligation of the NLS peptide derived from IGFBP-3 to chitosan polyplexes yields a 2-fold increase in transfection efficiency, which was not observed for NLS peptide derived from IGFBP-5.These results indicate that the integration of IGFBP-NLS-3 peptides into polyplexes has potential as a strategy to enhance the efficiency of non-viral vectors.     

Synthesis and characterization of cellulose/silica hybrid materials with chemical crosslinking

The cellulose/silica hybrid biomaterials are prepared by sol–gel covalent crosslinking process. The tetraethoxysilane (TEOS) as precursor, γ-aminopropyltriethoxylsilane (APTES) as couple agent, and 2,4,6-tri[(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent, are used in the sol–gel crosslinking process. The chemical and morphological structures of cellulose/silica covalent crosslinking hybrids are investigated with micro-FT-IR spectra, nitrogen element analysis, X-ray diffraction, SEM, AFM, and DSC. The results show that the cellulose/silica hybrids form new macromolecular structures. In sol–gel process, inorganic particles are dispersed at the nanometer scale in the cellulose host matrix, bounding to the cellulose through covalent bonds. The cellulose/silica covalent crosslinking hybrid can form good and smooth film on the cellulose. The thermal properties of organic/inorganic hybrids are improved.     

Synthesis and study of cross-linked chitosan-N-poly(ethylene glycol) nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on chitosan. Poly(ethylene glycol) dicarboxylic acid was used for intramolecular cross-linking of the chitosan linear chains. The condensation reaction of carboxylic groups and pendant amino groups of chitosan was performed by using water-soluble carbodiimide. The prepared nanosystems were stable in aqueous media. The structure of the products was determined by nuclear magnetic resonance (NMR) spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that biodegradable cross-linked chitosan nanoparticles experienced considerable swelling because of the length and flexibility of the cross-linking agent. The aqueous solutions or dispersions of nanoparticles were stable and clear or mildly opalescent systems depending on the ratio of cross-linking and molecular weight of chitosan, findings consistent with values of transmittance above 75%. Particle size measured by TEM varied in the range of 4-24 nm. In the swollen state, the average size of the individual particles measured by DLS was in the range of 50-120 nm depending on the molecular weight of chitosan and the ratio of cross-linking.     

尺寸均一的壳聚糖微球的制备及其作为胰岛素控释载体的研究

采用新型微孔膜乳化技术制备了载胰岛素的壳聚糖微球。研究表明,要制备粒径均一的壳聚糖微球,必须将亲水性膜修饰成疏水性;制得的微球粒径和所采用的膜孔径之间存在很好的线性关系,使得微球粒径可控;以胰岛素为模型药物,主要考察了交联剂用量和交联时间对微球表面形态、药物包埋率和微球体外释药特性的影响。结果表明当氨基与醛基的摩尔比为1∶0.7、交联时间为1h时,所得载药微球的包埋率最高,随着戊二醛用量的增加和交联时间的延长,药物体外释放速率减慢。     

Fibrin gel structure: influence of calcium and covalent cross-linking on the elasticity

Calcium ion causes the development of a higher elastic modulus in fibrinogen solutions clotted by thrombin. By also measuring the development of covalent crosslinks introduced by activated Factor XIII, we find that (a) calcium ion causes an overall increase of the modulus, (b) covalent crosslinking of α-chains causes an increase of the modulus, while (c) covalent crosslinking of γ-chains does not.     

The use of single walled carbon nanotubes dispersed in a chitosan matrix for preparation of a galactose biosensor

Chitosan was chosen as a natural polymer for dispersion of single walled carbon nanotubes (SWNT) based on its ability to efficiently solubilize SWNTs to form a stable dispersion. Moreover, chitosan films deposited on a surface of a glassy carbon (GC) electrode are mechanically stable. Further stabilisation of the chitosan film containing SWNT (CHIT-SWNT) was done by chemical crosslinking with glutaraldehyde and free aldehyde groups produced a substrate used for covalent immobilisation of galactose oxidase (GalOD). Different galactose biosensor configurations were tested with optimisation of composition of inner and outer membrane; and enzyme immobilisation procedure, as well. Detection of oxygen uptake by GalOD on CHIT-SWNT layer at -400 mV is robust and, when flow injection analysis (FIA) was applied for assays, a low detection limit (25 microM) and very high assay throughput rate (150 h-1) was achieved. This new galactose biosensor offers highly reliable detection of galactose with R.S.D. well below 2% and it has been successfully applied to assaying galactose in a blood sample with recovery index between 101.2 and 102.7%.     

Study and formation of vesicle systems with low polydispersity index by ultrasound method

The formation of liposomes with low polydispersity index by application of ultrasounds was investigated considering methodology specifications such as sonication time and sonication power. Phosphatidylcholine (PC) liposomes were formed by the evaporation–hydration method. The vesicles were sonicated using several sonication conditions. The liposomes were then characterized by dynamic light scattering (DLS) and freeze-fracture electron microscopy (FFEM). Correlation functions from DLS were treated by cumulants method and GENDIST to obtain the mean radius and polydispersity index. These calculations allowed to fix an optimal sonication time (3000 s) and a useful interval of ultrasound power between 39 and 91 W. DLS and FFEM results confirmed that vesicle size, lamellarity and the polydispersity index decreased with the increase of sonication power. Thus, we propose a systematic method to form liposomes in which the physical characteristics of the vesicles may be controlled as a function of sonication time and power.     

Preparation and characterization of chitosan-based nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on chitosan for biomedical applications. Natural di- and tricarboxylic acids were used for intramolecular cross-linking of the chitosan linear chains. The condensation reaction of carboxylic groups and pendant amino groups of chitosan was performed by using water-soluble carbodiimide. This method allows the formation of polycations, polyanions, and polyampholyte nanoparticles. The prepared nanosystems were stable in aqueous media at low pH, neutral, and mild alkaline conditions. The structure of products was determined by NMR spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, but at a given pH, it was independent of the ratio of cross-linking and the cross-linking agent. Particle size measured by TEM varied in the range 60-280 nm. In the swollen state, the average size of the particles measured by DLS was in the range 270-370 nm depending on the pH. The biodegradable cross-linked chitosan nanoparticles, as solutions or dispersions in aqueous media, might be useful for various biomedical applications.     

Influence of photocrosslinking on the retrogradation of wheat starch based films

The ageing of wheat starch based materials was followed as a function of time for different systems suitably hydrated to be in the rubbery state. In particular, one aspect of retrogradation, that is to say the development of crystallinity is analysed in order to study the influence of a specific crosslinking treatment of starch films made by UV irradiation (photocrosslinking). Mechanical and thermal properties showed that an important limitation on this particular ageing occurs after photocrosslinking at room temperature. A process of accelerated ageing, monitored by modulated DSC, was also performed at 60 °C in order to increase retrogradation kinetics. The results showed a recrystallisation decrease and it appeared that the presence of the plasticiser enhances retrogradation. For a plasticised sample (17% glycerol), a decrease of 30% of the melting enthalpy was observed compared to 91% for an unplasticised one. A modification in the nature of the melting peaks, as recorded by modulated DSC, allowed us to propose a model for amylopectin retrogradation after crosslinking.     

FTIR-ATR characterization of free Rhizomucor meihei lipase (RML), Lipozyme RM IM and chitosan-immobilized RML

The synthesis and characterization of biocatalysts based on lipase from Rhizomucor miehei (RML) immobilized on chitosan-based supports were investigated. The enzyme was immobilized on chitosan following two strategies: (i) physical adsorption; and (ii) covalent bonding using glutaraldehyde. The content of enzyme bound in the supports, as precipitable protein, was analyzed using UV/visible methods. FTIR-ATR spectroscopy was employed to characterize the prepared biocatalysts, as well the native enzyme and a commercial biocatalyst Lipozyme RM IM, used as reference materials. Analysis of the amide I′ signal allowed to follow the changes in the secondary structure of the enzyme after binding to the support and its thermal stability. The hydrolysis of ethyl stearate monitored in situ by FTIR-ATR was used as a test reaction. Results showed that RML was bound to Chit and Glut–Chit with minor changes in its secondary structure, thermal stability and enzymatic activity in a selected reaction test.     

Anisotropic viscoelastic properties of cortical bone

Relaxation Young's modulus of cortical bone was investigated for two different directions with respect to the longitudinal axis of bone (bone axis, BA): the modulus parallel (P) and normal (N) to the BA. The relaxation modulus was analyzed by fitting to the empirical equation previously proposed for cortical bones, i.e., a linear combination of two Kohlraush-Williams-Watts (KWW) functions (Iyo et al., 2003. Biorheology, submitted): E(t)=E0 (A1 exp[-(t/tau1)beta]+(1-A1) exp[-(t/tau2)gamma]), [0 < A1, beta, gamma < 1], where E0 is the initial modulus value E0. Tau1 and tau2(>tau1) are characteristic times of the relaxation, A1 is the fractional contribution of the fast relaxation (KWW1 process) to the whole relaxation process, and beta and gamma are parameters describing the shape of the relaxation modulus. In both P and N samples, the relaxation modulus was described well by the empirical equation. The KWW1 process of a P sample almost completely coincided with that of an N sample. In the slow process (KWW2 process), there was a difference between the relaxation modulus of a P sample and that of an N sample. The results indicate that the KWW1 process in the empirical equation represents the relaxation in the collagen matrix in bone and that the KWW2 process is related to a higher-order structure of bone that is responsible for the anisotropic mechanical properties of bone.     

Preparation of polymeric micelles based on chitosan bearing a small amount of highly hydrophobic groups

A method has been developed to obtain micelles based on amphiphilic chitosan derivatives which were synthesized by grafting hydrophobic stearoyl, palmitoyl and octanoyl aliphatic chains onto molecules of chitosan with degrees of substitution from 0.9% to 29.6%. The N-fatty acylations were carried out by reacting carboxylic anhydride with chitosan in dimethyl sulfoxide. The chitosan derivative-based micelles were spherical as observed by transmission electron microscope (TEM). Their sizes were in the range of 140–278 nm as measured by dynamic light scattering (DLS). The micellar critical aggregation concentration (CAC) can reach 1.99 × 10⁻³ mg/mL, indicating that they are more stable upon dilution than micelles based on other chitosan derivatives such as deoxycholic acid-modified chitosan reported previously.     

Catalytic and stereoselective properties of the immobilized amidase of Rhodococcus rhodochrous 4-1

Applied Biochemistry and Microbiology - The amidase of Rhodococcus rhodochrous 4-1 was immobilized by covalent attachment to activated chitosan by physical sorption on carbon adsorbents and by the...     

Kinetics of gelation and thermal sensitivity of N-isobutyryl chitosan hydrogels

N-Acylation of chitosan with carboxylic anhydrides in dilute acetic acid/methanol has been a well documented strategy to selectively modify chitosan. Although this reaction is known to lead to irreversible gel formation, the kinetics and mechanism of this process have not so far been addressed. To this purpose, gel formation during the N-isobutyrylation of chitosan was investigated as a function of the reaction stoichiometry (R), chitosan concentration, and temperature by small deformation oscillatory rheology. Gel formation follows closely the chemical reaction and it proceeds predominantly under second-order kinetics as established from the dependence of critical gel time, t(gel), on R and concentration. The activation energy value derived from t(gel) vs 1/T data (E(a) = 68.29 +/- 1.80 kJ/mol) was almost identical to values reported for the chitosan N-acetylation reaction in previous studies. An excess isobutyric anhydride is suggested to be necessary for nucleation and hydrophobic association. The potential application of N-isobutyrylchitosan (NIBC) hydrogels in the design of thermally sensitive materials is also demonstrated.     

Rheological properties of chitosan-tripolyphosphate complexes: From suspensions to microgels

Complex fluids formed by crosslinking of chitosan (CS, 330 kDa) with sodium tripolyphosphate (TPP) have been studied by dynamic light scattering (DLS), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and rheology. The effects of chitosan/TPP ratios, initial chitosan or TPP concentrations, and ultrasonication time on the chitosan-TPP complex formation have been investigated. It was found that the optimum condition for CS-TPP nanoparticle formation occurred at CS/TPP mass ratio of 3.75 and with 9 min sonication treatment (energy output 3.75 W/mL). At the same initial chitosan concentration, small particle sizes (i.e., particle size < 300 nm) resulted in the formation of CS-TPP nanoparticle suspensions, which showed a lower viscosity than pure chitosan solutions, and their viscosities increased as the CS-TPP nanoparticles sizes increased. Centrifugation of CS-TPP particles of larger particle sizes (i.e., 360-870 nm) at 11,000 × g caused the formation of CS-TPP microgels. Dynamic rheological studies indicated that both storage modulus (G′) and loss modulus (G″) increased with particle sizes. During centrifugation processing, strong centrifugal force surmounted the electrostatic repulsion between CS-TPP particles and caused particles to stick with each other to form CS-TPP microgels. The water contents of microgels negligibly depended on particle size, suggesting that the free volumes of microgels were not affected by particle size, therefore supporting our pseudo-hard sphere assumption for CS-TPP nanoparticles.