Synthesis, characterization, and antifungal activity of novel quaternary chitosan derivatives

Three novel quaternary chitosan derivatives were successfully synthesized by reaction of chloracetyl chitosan (CACS) with pyridine (PACS), 4-(5-chloro-2-hydroxybenzylideneamino)-pyridine (CHPACS), and 4-(5-bromo-2-hydroxybenzylideneamino)-pyridine (BHPACS). The chemical structure of the prepared chitosan derivatives was confirmed by Fourier transform infrared (FT-IR) and ¹³C nuclear magnetic resonance (¹³C NMR) and their antifungal activity against Cladosporium cucumerinum, Monilinia fructicola, Colletotrichum lagenarium, and Fusarium oxysporum was assessed. Comparing with the antifungal activity of chitosan, CACS, and PACS, CHPACS and BHPACS exhibited obviously better inhibitory effects, which should be related to the synergistic reaction of chitosan itself with the grafted 2-[4-(5-chloro-2-hydroxybenzylideneamino)-pyridyl]acetyl and 2-[4-(5-bromo-2-hydroxybenzylideneamino)-pyridyl]acetyl.     

Novel hybrids of fluconazole and furanones: design, synthesis and antifungal activity

During our efforts to develop new antifungal agents, a number of hybrid molecules containing furanones and fluconazole pharmacophores were designed and synthesized. The new chemical entities thus synthesized were tested for their potential as antifungal agents against various fungal strains and it was observed that the compounds with general structure 7 were potent inhibitors of Candida albicans ATCC 24433, Candida glabrata ATCC 90030, Candida tropicalis ATCC 750 and Candida neoformans ATCC 34664 while the fluconazole analogues 12 exhibited antifungal activity against Candida albicans ATCC 24433 and Candida glabrata ATCC 90030. The structure-activity relationship for these compounds is discussed. The synthetic strategies used in the present work have potential to prepare a large number of compounds for further refinement of structures to obtain molecules suitable for development as antifungal drugs.     

Synthesis and antifungal activity of oxygenated cholesterol derivatives

A series of oxygenated cholesterol derivatives were prepared from new synthetic methods and evaluated for their in vitro antimicrobial properties against human pathogens. The activity was highly dependent on the structure of the different compounds involved. The best results were obtained with hydroxy ketones 2, 4 and 5 and diketone 7 exhibiting activities against S. cerevisiae (ATCC 28383) and Candida albicans (CIP 1663-86). For example, compound 2 exhibited high activities against C. albicans (CIP 1663-86) and Amphotericine B and miconazole resistant strain C. albicans (CIP 1180-79) at a concentration of 1.5 microg/mL.     

Design,synthesis and anticancer activity of novel nopinone-based thiosemicarbazone derivatives

A series of new nopinone-based thiosemicarbazone derivatives were designed and synthesized as potent anticancer agents. All these compounds were identified by ¹H NMR, ¹³C NMR, HR-MS spectra analyses. In the in vitro anticancer activity, most derivatives showed considerable cytotoxic activity against three human cancer cell lines (MDA-MB-231, SMMC-7721 and Hela). Among them, compound 4i exhibited most potent antitumor activity against three cancer cell lines with the IC₅₀ values of 2.79 ± 0.38, 2.64 ± 0.17 and 3.64 ± 0.13 μM, respectively. Furthermore, the cell cycle analysis indicated that compound 4i caused cell cycle arrest of MDA-MB-231 cells at G2/M phase. The Annexin V-FITC/7-AAD dual staining assay also revealed that compound 4i induced the early apoptosis of MDA-MB-231 cells.     

Novel thiosemicarbazone derivatives as potential antitumor agents: Synthesis, physicochemical and structural properties, DNA interactions and antiproliferative activity

The paper describes synthesis of several novel thiosemicarbazone derivatives. Furthermore, crystal and molecular structure of 4-diethylamino-salicylaldehyde 4-phenylthiosemicarbazone revealed planarity of conjugated aromatic system, which suggested the possibility of DNA binding by intercalation, especially for here studied naphthalene derivatives. However, here presented DNA binding studies excluded this mode of action. Physicochemical and structural properties of novel derivatives were compared with previously studied analogues, taken as reference compounds, revealing distinctive differences. In addition, novel thiosemicarbazone derivatives (1, 2 and 5–8) clearly display stronger antiproliferative activity on five tumor cell lines than the reference compounds 3 and 4, which supports their further investigation as potential antitumor agents.     

Synthesis of acyl thiourea derivatives of chitosan and their antimicrobial activities in vitro

Three different acyl thiourea derivatives of chitosan (CS) were synthesized and their structures were characterized by FT-IR spectroscopy and elemental analysis. The antimicrobial behaviors of CS and its derivatives against four species of bacteria (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Sarcina) and four crop-threatening pathogenic fungi (Alternaria solani, Fusarium oxysporum f. sp. vasinfectum, Colletotrichum gloeosporioides (Penz.) Saec, and Phyllisticta zingiberi) were investigated. The results indicated that the antimicrobial activities of the acyl thiourea derivatives are much better than that of the parent CS. The minimum value of MIC and MBC of the derivatives against E. coli was 15.62 and 62.49 microg/mL, respectively. All of the acyl thiourea derivatives had a significant inhibitory effect on the fungi in concentrations of 50-500 microg/mL; the maximum inhibitory index was 66.67%. The antifungal activities of the chloracetyl thiourea derivatives of CS are noticeably higher than the acetyl and benzoyl thiourea derivatives. The degree of grafting of the acyl thiourea group in the derivatives was related to antifungal activity; higher substitution resulted in stronger antifungal activity.     

Mixed-ligand thiosemicarbazone complexes of nickel: Synthesis, structure and catalytic activity

Reaction of thiosemicarbazones of salicylaldehyde, 2-hydroxyacetophenone and 2-hydroxynaphthaldehyde with Ni(ClO₄)₂·6H₂O, using 2,2′-bipyridine as coligand, afforded three dinuclear complexes (1a, 1b and 1c). Similar reactions using 2,2′:6′2″-terpyridine as coligand yielded three mononuclear complexes (2a, 2b and 2c). Crystal structures of 1b and 2a have been determined. In the dinuclear complexes, one nickel center is surrounded octahedrally by a dianionic O,N,S-donor thiosemicarbazone, a bipyridine and the bridging phenolate oxygen of the other thiosemicarbazone. The second nickel center adopts a square-planar geometry created by the second O,N,S-coordinated thiosemicarbazone and the bridging sulfur of the first thiosemicarbazone. In the mononuclear complexes nickel is complexed by a monoanionic O,N,S-coordinated thiosemicarbazone and a terpyridine, and the cationic species are isolated as perchlorate salts. All these six complexes are paramagnetic (μ_eff = 2.63-2.92 B.M.) and in dimethylsulfoxide solution they show intense absorptions in the visible and ultraviolet region, origin of which has been probed through DFT calculations. Cyclic voltammetry on the complexes shows one irreversible oxidation of coordinated thiosemicarbazone on the positive side of SCE, and one irreversible reduction of the coordinated polypyridine ligand on the negative side. These nickel complexes are found to be efficient catalysts for Suzuki cross-coupling reactions.     

Design,synthesis and antifungal activity evaluation of isocryptolepine derivatives

In this paper, the nitrogen atom was inserted into the anthracycline system of the isocryptolepine nucleus to obtain the “Aza”-type structure benzo[4,5]imidazo[1,2-c] quinazoline. A series of “Aza”-type derivatives were designed, synthesized and evaluated for their antifungal activity against six plant fungi in vitro. Among all derivatives, compounds A-0, B-1 and B-2 showed significant antifungal activity against B. cinerea with the EC₅₀ values of 2.72 μg/mL, 5.90 μg/mL and 4.00 μg/mL, respectively. Compound A-2 had the highest activity against M. oryzae with the EC₅₀ values of 8.81 μg/mL, and compound A-1 demonstrated the most control efficacy against R. solani (EC₅₀, 6.27 μg/mL). Moreover, compound A-0 was selected to investigate the in vivo tests against B. cinerea and the results indicated that the preventative efficacy of it up to 72.80% at 100 μg/mL. Preliminary mechanism studies revealed that after treatment with A-0 at 5 µg/mL, the B. cinerea mycelia appeared curved, collapsed and the cell membrane integrity may be damaged. The reactive oxygen species production, mitochondrial membrane potential and nuclear morphometry of mycelia have been changed, and the membrane function and cell proliferation of mycelia were destroyed. Compounds A-0, A-1, B-1 and B-2 presented weaker toxicities against two cells lines than isocryptolepine. This study lays the foundation for the future development of isocryptolepine derivatives as environmentally friendly and safe agricultural fungicides.     

The influence of molecular weight of quaternized chitosan on antifungal activity

Quaternized chitosan derivatives with different molecular weights were synthesized in the laboratory. Subsequent experiments were conducted to test their antifungal activities against Botrytis cinerea Pers. (B. cinerea pers.) and Colletotrichum lagenarium (Pass) Ell.et halst (C. lagenarium (Pass) Ell.et halst). Our results indicate that quaternized chitosan derivatives have stronger antifungal activities than chitosan. Furthermore, quaternized chitosan derivatives with high molecular weight are shown to have even stronger antifungal activities than those with low molecular weight.     

Preparation and anticoagulant activity of a low-molecular-weight sulfated chitosan

Synthesis of chitosan sulfates with low molecular weight (M_v 9000–35,000 Da) was carried out by sulfation of low molecular weight chitosan (M_v 10,000–50,000 Da). The oleum was used as sulfating agent and dimethylfornamide as medium. The chitosans were prepared by enzymatic and acidic hydrolysis of initial high molecular weight chitosan as well as by extrusion solid-state deacetylation of chitin. As was shown by FT-IR and NMR-methods and elemental analysis, the sulfation occurred at C-6 and C-3 positions and substitution degree is 1.10–1.63. The molecular weight sulfated chitosan was determined by viscometric method and the Mark–Houwink equation [η]=10⁻⁵ 4.97 M^0.77. Study of anticoagulant activity showed that chitosan sulfates with lowered molecular weight demonstrated a regular increase of anti-Xa activity like heparins.     

Preparation and antibacterial activity of chitosan nanoparticles

Chitosan nanoparticles, such as those prepared in this study, may exhibit potential antibacterial activity as their unique character. The purpose of this study was to evaluate the in vitro antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against various microorganisms. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. Copper ions were adsorbed onto the chitosan nanoparticles mainly by ion-exchange resins and surface chelation to form copper-loaded nanoparticles. The physicochemical properties of the nanoparticles were determined by size and zeta potential analysis, atomic force microscopy (AFM), FTIR analysis, and XRD pattern. The antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against E. coli, S. choleraesuis, S. typhimurium, and S. aureus was evaluated by calculation of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Results show that chitosan nanoparticles and copper-loaded nanoparticles could inhibit the growth of various bacteria tested. Their MIC values were less than 0.25 microg/mL, and the MBC values of nanoparticles reached 1 microg/mL. AFM revealed that the exposure of S. choleraesuis to the chitosan nanoparticles led to the disruption of cell membranes and the leakage of cytoplasm.     

Antibacterial activity of quaternary ammonium chitosan containing mono or disaccharide moieties: Preparation and characterization

The 9 quaternary ammonium chitosans containing monosaccharides or disaccharides moieties were successfully synthesized by reductive N-alkylation then quaternized by N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride (Quat-188). The chemical structures of quaternary ammonium chitosan derivatives were characterized by ATR-FTIR and ¹H NMR spectroscopy. The degree of N-substitution (DS) and the degree of quaternization (DQ) were determined by ¹H NMR spectroscopic method. It was found that the DS was in the range of 12–40% while the DQ was in the range of 90–97%. The results indicated that the O-alkylation was occured in this condition. Moreover, all quaternary ammonium chitosan derivatives were highly water-soluble at acidic, basic, and neutral pH. Minimum inhibitory concentration (MIC) antibacterial studies of these materials were carried out on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria compared to quaternary ammonium N-octyl and N-benzyl chitosan derivatives. The quaternary ammonium mono and disaccharide chitosan derivatives showed very high MIC values which were in the range of 32 to >256 μg/mL against both bacteria. Also it was found that the antibacterial activity decreased with increasing the DS. This was due to the increased hydrophilicity of mono and disaccharide moieties. On the other hand, the low MIC values (8–32 μg/mL) were obviously observed when the DS of quaternary ammonium N-octyl and N-benzyl chitosan derivatives was lower than 18%. The results showed that the presence of hydrophobic moiety such as the N-benzyl group enhanced the antibacterial activity compared to the hydrophilic moiety against both bacteria.     

Synthesis of novel tetrazole derivatives and evaluation of their antifungal activity

With the appearance of the antifungal resistance, novel antifungal agents need to be identified. In this context new 2,5-disubstituted tetrazole derivatives containing benzothiazole, benzoxazole or phenylsulfonyl moiety were synthesized by N-alkylation of aryltetrazole with 2-[(3-chloropropyl)sulfanyl]-1,3-benzothiazole or 2-[(3-chloropropyl)sulfanyl]-1,3-benzoxazole and Michael-type addition of aryltetrazole to phenyl vinyl sulfone. The chemical structures of the synthesized compounds were confirmed by means of ¹H NMR, ¹³C NMR, IR and HRMS spectral data. The compounds were tested against the moulds: Fusarium sambucinum, Fusarium oxysporum, Colletotrichum coccodes, Aspergillus niger, and the yeast Candida albicans. The results showed that among the moulds only C. coccodes was significantly sensitive to all the structures examined. All the tetrazole derivatives acted at the same level against C. albicans and demonstrated a high cell growth inhibition (97–99%) at the concentrations ranging from 16 to 0.0313 μg/mL. The mode of action of 2-({3-[5-(4-chlorophenyl)-2H-tetrazol-2-yl]propyl}sulfanyl)-1,3-benzoxazole (5c) and 2-({3-[5-(2-chlorophenyl)-2H-tetrazol-2-yl]propyl}sulfanyl)-1,3-benzoxazole (5d) was established by verifying fungal growth in the presence of osmotic protector-sorbitol. The effect of compound 5c or 5d combined with Fluconazole was determined using the checkerboard method. The calculated fractional inhibitory concentration index (FIC) indicated antagonism (FIC >1). Additionally, survival experiments with lepidopteran Galleria mellonella treated with compounds 5c and 5d were performed and demonstrated the lack of toxicity of these compounds.     

Quaternization of N-aryl chitosan derivatives: synthesis, characterization, and antibacterial activity

Chemical modification of chitosan by introducing quaternary ammonium moieties into the polymer backbone renders excellent antimicrobial activity to the adducts. In the present study, we have synthesized 17 derivatives of chitosan consisting of a variety of N-aryl substituents bearing either electron-donating or electron-withdrawing groups. Selective N-arylation of chitosan was performed via Schiff bases formed by the reaction between the 2-amino groups of the glucosamine residue of chitosan with aromatic aldehydes under acidic conditions, followed by reduction of the Schiff base intermediates with sodium cyanoborohydride. Each of the derivatives was further quaternized using N-(3-chloro-2-hydroxypropyl)trimethylammonium chloride (Quat-188) as the quaternizing agent that reacted with either the primary amino or hydroxyl groups of the glucosamine residue of chitosan. The resulting quaternized materials were water soluble at neutral pH. Minimum inhibitory concentration (MIC) antimicrobial studies of these materials were carried out on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria in order to explore the impact of the extent of N-substitution (ES) on their biological activities. At ES less than 10%, the presence of the hydrophobic substituent, such as benzyl and thiophenylmethyl, yielded derivatives with lower MIC values than chitosan Quat-188. Derivatives with higher ES exhibited reduced antibacterial activity due to low quaternary ammonium moiety content. At the same degree of quaternization, all quaternized N-aryl chitosan derivatives bearing either electron-donating or electron-withdrawing substituents did not contribute antibacterial activity relative to chitosan Quat-188. Neither the functional group nor its orientation impacted the MIC values significantly.     

Design,synthesis and antifungal activity of amide and imine derivatives containing a kakuol moiety

In continuation of our program to discover new potential antifungal agents, a series of amide and imine derivatives containing a kakuol moiety were synthesized and characterized by the spectroscopic analysis. By using the mycelium growth rate method, the target compounds were evaluated systematically for antifungal activities in vitro against four plant pathogenic fungi, and structure–activity relationships (SAR) were derived. Compounds 7d, 7e, 7h, 7i and 7r showed obvious inhibitory activity against the corresponding tested fungi at 50 μg/mL. Especially, compounds 7e and 7r displayed more potent antifungal activity against B. cinerea than that of thiabendazole (a positive control). Moreover, compound 7e also exhibited good activity against A. alternata with EC₅₀ values of 11.0 µg/mL, and the value was slightly superior to that of thiabendazole (EC₅₀ = 14.9 µg/mL). SAR analysis showed that the ether group was a highly sensitive structural moiety to the activity and the type as well as position of substituents on benzene ring could make some effects on the activity.     

一株抗真菌解淀粉芽孢杆菌的分离鉴定及其发酵条件的初步研究

从堆肥中分离到一株对植物病原菌尖孢镰刀菌(Fusarium oxysporum)具有强烈抗菌活性并具有较广抗菌谱的细菌Q-12菌株。通过形态观察、生理生化实验1、6S rDNA同源性序列分析以及部分特异性基因序列分析,鉴定该菌为解淀粉芽孢杆菌。该菌的最适培养基组成为:葡萄糖5g/L,NH4Cl 1g/L,牛肉膏0.8g/L,氯化镁5g/L。最适培养温度为33℃,最适培养pH为6.0,最适培养时间为40h。     

Synthesis,characterization, antifungal evaluation and 3D-QSAR study of phenylhydrazine substituted tetronic acid derivatives

A series of 3-(1-(2-(substituted phenyl)hydrazinyl)alkylidene)furan-2,4(3H,5H)-diones were designed and prepared using two synthetic routes. Their structures were confirmed by FT-IR, ¹H NMR, ¹³C NMR, MS, elemental analysis and single-crystal X-ray diffraction. Their bioactivity was evaluated against Botrytis cinerea in vitro. Most target compounds exhibited remarkable antifungal activity. Two compounds 7f and 7h were highly effective and their EC₅₀ values were 0.241 μg/mL and 0.167 μg/mL, respectively, close to that of the control drug procymidone. 3D-QSAR studies of CoMFA and CoMSIA were carried out. Models with good predictive ability were generated with the cross validated q² values for CoMFA and CoMSIA being 0.565 and 0.823. Conventional r² values were 0.983 and 0.945, respectively. The results provided a practical tool for guiding the design and synthesis of novel and more potent tetronic acid derivatives containing substituted phenylhydrazine moiety.     

Syntheses, crystal structure, spectroscopic characterization and antifungal activity of new N-R-sulfonyldithiocarbimate metal complexes

Five new compounds with the general formula of (Bu₄N)₂[M(RSO₂NCS₂)₂], where Bu₄N = tetrabutylammonium cation, (M = Ni, R = 4-FC₆H₄) (1), (M = Zn, R = 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-IC₆H₄), (2), (3), (4) and (5), respectively, were obtained by the reaction of the appropriate potassium N-R-sulfonyldithiocarbimate (RSO₂NCS₂K₂) with nickel(II) chloride hexahydrate or zinc(II) acetate dihydrate in metanol:water 1:1. The elemental analyses and the IR data are consistent with the formation of the expected bis(dithiocarbimato)metal(II) complexes. The ¹H and ¹³C NMR spectra showed the signals for the tetrabutylammonium cation and the dithiocarbimate moieties. The compounds 1, 2 and 5 were also characterized by X-ray diffraction techniques. The nickel(II) is coordinated by two N-4-fluorophenylsulphonyldithiocarbimato(2-) ligands forming a planar coordination. The zinc(II) exhibits distorted tetrahedral configuration in compounds 2 and 5 due to the chelation effect of two sulfur atoms of the N-R-sulfonyldithiocarbimate ligands. The antifungal activities of the compounds were tested in vitro against Colletotrichum gloeosporioides, an important fungus that causes the plant disease known as anthracnose in fruit trees. All the complexes were active.     

Preparation, characterization and antimicrobial activity of a bio-composite scaffold containing chitosan/nano-hydroxyapatite/nano-silver for bone tissue engineering

In this study, a bio-composite scaffold containing chitosan/nano-hydroxyapatite/nano-silver particles (CS/nHAp/nAg) was developed by freeze drying technique, followed by introduction of silver ions in controlled amount through reduction phenomenon by functional groups of chitosan. The scaffolds were characterized using SEM, FT-IR, XRD, swelling, and biodegradation studies. The testing of the prepared scaffolds with Gram-positive and Gram-negative bacterial strains showed antibacterial activity. The scaffold materials were also found to be non-toxic to rat osteoprogenitor cells and human osteosarcoma cell line. Thus, these results suggested that CS/nHAp/nAg bio-composite scaffolds have the potential in controlling implant associated bacterial infection during reconstructive surgery of bone.     

Synthesis and antifungal properties of sulfanilamide derivatives of chitosan

Sulfanilamide derivatives of chitosan (2-(4-acetamido-2-sulfanimide)-chitosan (HSACS, LSACS), 2-(4-acetamido-2-sulfanimide)-6-sulfo-chitosan (HSACSS, LSACSS) and 2-(4-acetamido-2-sulfanimide)-6-carboxymethyl-chitosan (HSACMCS, LSACMCS)) were prepared using different molecular weights of chitosan (CS), carboxymethyl chitosan (CMCS) and chitosan sulfates (CSS) reacted with 4-acetamidobenzene sulfonyl chloride in dimethylsulfoxide solution. The structures of the derivatives were characterized by FT-IR spectroscopy and elemental analysis, which showed that the substitution degree of sulfanilamide group of HSACS, HSACSS, HSACMCS, LSACS, LSACSS and LSACMCS were 0.623, 0.492, 0.515, 0.576, 0.463 and 0.477, respectively. The solubility of the derivatives (pH<7.5) was higher than that of chitosan (pH<6.5). The antifungal activities of the derivatives against Aiternaria solani and Phomopsis asparagi were evaluated based on the method of Jasso et al. in the experiment. The results indicated that all the prepared sulfanilamide derivatives had a significant inhibiting effect on the investigated fungi in the polymer concentration range from 50 to 500 microg mL(-1). The antifungal activities of the derivatives increased with increasing the molecular weight, concentration or the substitution degree. The sulfanilamide derivatives of CS, CMCS and CSS show stronger antifungal activities than CS, CMCS and CSS.