Hydrothermal synthesis of bacterial cellulose/AgNPs composite: A “green” route for antibacterial application

Antibacterial materials based on cellulose have been widely used in many fields. In this work, an environmentally benign and facile approach for production of silver nanoparticles (AgNPs) was proposed for the first time by hydrothermal synthesis using bacterial cellulose (BC) as both the reducing and stabilizing agent, without any chemical reagents introduced. Some key reaction parameters were optimized to achieve a high antibacterial activity of the BC/AgNPs composite. Under the optimal conditions, a small size and a narrow distribution of AgNPs, 17.1 ± 5.9 nm, was formed on the BC matrix, with a silver content of 1.78% (w/w) and a MIC value of 1.30 × 10⁻⁴ μg/CFU. Moreover, a sustained release of silver and a prolonged antibacterial performance of the composite against Staphylococcus aureus were found over a long period time of 72 h, which were important for practical applications.     

Cellulose nanocrystals as a reinforcing material for electrospun poly(methyl methacrylate) fibers: Formation, properties and nanomechanical characterization

Uniform fibers composed of poly(methyl methacrylate) (PMMA) reinforced with progressively increasing contents of cellulose nanocrystals (CNCs), up to 41 wt% CNCs, have been successfully produced by electrospinning. The morphological, thermal and nanomechanical properties of the composite sub-micron fibers were investigated. The CNCs derived from wood pulp by sulfuric acid hydrolysis were well dispersed in solutions of PMMA and the processing solvent N,N-dimethylformamide prior to fiber formation. Well-formed fibers with controllable diameters were generated reproducibly at all CNC contents investigated including 41 wt%. The orientation of the CNCs along the fiber axis was facilitated by the electrospinning process and observed directly from microscopy examination. Shifts in thermal transitions of PMMA with increasing CNC content suggest hydrogen bonding interactions between CNC hydroxyl groups and carbonyl groups on the PMMA matrix. Nanoscale dynamic mechanical analysis (nano-DMA) was performed using nanoindentation on single fibers perpendicular to the fiber axis. Many of the current challenges associated with single fiber nanoindentation are addressed, such as fiber diameter range and minimum, depth to diameter ratio, and valid depth range under these experimental conditions. Fibers that contained 17 wt% CNCs showed a modest increase of 17% in the storage modulus of PMMA, a high modulus polymer of interest for transparent composite applications.     

Cyclooxygenase-2 169C > G and 8473T > C gene polymorphisms and prostaglandin E2 level in breast cancer: A case–control study

Aims

Cyclooxygenase 2 (COX-2) with the resulting prostaglandin E2 (PGE2) is linked to increased risk of human breast cancer (BC). The aim of this study was to determine COX-2 169C > G and 8473T > C gene polymorphisms and PGE2 level at various stages of BC clarifying the role of COX-2 gene polymorphism and PGE2 in relation to BC.

Methods

The study population comprised 160 women at different stages of BC and 150 gender- and age-matched healthy control subjects. Plasma PGE2 was measured by ELISA, the COX-2 gene polymorphisms were determined using PCR-RFLP.

Results

The variant alleles COX-2 169G and 8473C were significantly associated with BC susceptibility [OR = 3.1, 95% CI (2.2–4.4), P < 0.001 for 169C>G and OR = 1.74, 95%CI (1.3–2.4), P = 0.005 for 8473C]. However, both COX-2 gene polymorphisms were not associated with breast cancer stage. Plasma PGE2 levels were significantly increased in patients compared to the controls. In early and late stages of BC, there was a significant increase in the plasma PGE2 levels towards the presence of homozygous GG compared with homozygous CC (P < 0.001) for 169 C>G, also towards the presence of CC than TT (P < 0.001) for 8473T>C SNP.

Conclusion

The 169C>G and 8473T>C polymorphisms of the COX-2 gene were associated with the BC in Egyptian women. Furthermore, individuals with COX-2 169GG and 8473CC genotypes showed significant increase in plasma PGE2 levels. PGE2 levels may serve as a predictor of poor prognosis in patients with BC.     

Functional combination strategy for prioritization of human miRNA target

MicroRNAs (miRNAs) are a class of non-coding RNAs known to play important regulatory roles through targets, which can affect human cell proliferation, differentiation, and metabolism. Overlaps between different miRNA target prediction algorithms (MTPAs) are small, which limit the understanding of miRNA's biological functions. However, the overlaps increase on functional levels, such as Gene Ontology (GO), Protein–Protein Interaction Network (PPIN) and pathways. Here, we performed prioritization on existing predicted target sets for each miRNA by considering all the possible combinations of 7 functional levels. After analyzing the results of both single and multiple functional levels, we found that functional combination strategies including pathways and GO performed better in the prioritization of human miRNA target. The combination which performed best was “Pathway + GO BP + GO MF + GO CC + Target + PPIN”. For the prioritized result of this combination, the valid target had top ranking, and our method performed better than the MTPAs after comparison adopting the validated ranking levels. Top genes in ranking lists generated by this strategy were either validated by experiments or share same functions with the corresponding miRNA/its validated genes in disease related biological processes.     

Effects of different extenders and centrifugation/washing on postthaw microscopic-oxidative stress parameters and fertilizing ability of Angora buck sperm

The main objective of the current study was to evaluate the effects of extender type and centrifugation/washing prior to cryopreservation on the postthaw sperm parameters, lipid peroxidation, and superoxide dismutase activity of Angora buck (Capra hircus ancryrensis) sperm. Ejaculates collected from three Angora bucks were used in this study. Two consecutive ejaculates from each buck were pooled and split into equal parts in four Falcon tubes. Two tubes were diluted at 37 °C and then centrifuged to remove semen plasma. After centrifugation, two sediment parts were diluted with a Tris-based extender and commercial Bioxcell extender, respectively. The remaining two parts, which were not centrifuged/washed, were diluted with the above-mentioned extenders, respectively. Diluted samples were cooled to 5 °C and frozen in 0.25-mL French straws to be stored in liquid nitrogen. Frozen straws were thawed individually at 37 °C for 20 sec in a water bath for evaluation. The semen part with centrifugation/washing in the Bioxcell extender (BC) demonstrated a higher rate of subjective motility (58.1 ± 3.0%) compared with that of groups with (TC) or without (T) centrifugation/washing in the Tris-based extender (P < 0.01). Angora buck sperm frozen with (BC) or without (B) centrifugation/washing in the Bioxcell extender demonstrated higher percentages of motility (60.6 ± 2.7% and 54.3 ± 4.8%, respectively) compared with that of groups T and TC. The postthaw progressive motility rate (22.3 ± 2.7%) was significantly greater for semen parts diluted in B compared with that of other groups. BC gave rise to a lower value of average path velocity (90.0 ± 5.2 μm/sec) compared with that of other groups (P < 0.01). For straight linear velocity and linearity index, the highest values (103.2 ± 4.7 μm/sec, 47.5 ± 1.6% and 94.8 ± 3.0 μm/sec, 44.8 ± 1.1%, respectively) were obtained from B and TC (P < 0.001). For sperm acrosome and total abnormalities, TC gave the highest values (11.2 ± 0.6% and 26.6 ± 1.5%, respectively, P < 0.01). In the group frozen in BC, the percentage of membrane integrity assessed by hypo-osmotic swelling test was higher (61.2 ± 2.2%) than that of the other groups (P < 0.001). With respect to fertility results based on 35-d pregnancy rates, BC gave a higher rate (76.5%) than that of TC (27.8%, P < 0.05). Malondialdehyde formation was found to be lower (1.64 ± 0.26 nmol/L) in BC than in the other groups after the freeze-thawing process (P < 0.001). In the semen part frozen in BC, superoxide dismutase activity was higher (0.18 ± 0.02 U/mg protein) compared with that of the other groups (P < 0.05). Further studies are required to obtain more precise results for the characterization of oxidative stress parameters and fertilizing ability in cryopreserved buck spermatozoa.     

Biodegradable starch based nanocomposites with low water vapor permeability and high storage modulus

Nanocomposite materials based on a starch matrix reinforced with very small amounts of multi-walled carbon nanotubes (MWCNTs) (from 0.005 wt% to 0.055 wt%) were developed. The material's dynamic-mechanical and water vapor permeability properties were investigated. An increasing trend of storage modulus (E′) and a decreasing trend of water vapor permeability (WVP) with filler content were observed at room temperature. For the composite with 0.055 wt% of filler, E′ value was about 100% higher and WVP value was almost 43% lower than the corresponding matrix values. MWCNTs were wrapped in an aqueous solution of a starch-iodine complex before their incorporation into the matrix, obtaining exceptionally well-dispersed nanotubes and optimizing interfacial adhesion. This excellent filler dispersion leads to the development of an important contact surface area with the matrix material, producing remarkable changes in the starch-rich phase glass transition temperature even in composites with very low filler contents. This transition is shifted towards higher temperatures with increasing content of nanotubes. So at room temperature, some composites are in the rubber zone while others, in the transition zone. Therefore, this change in the material glass transition temperature can be taken as responsible for the important improvements obtained in the composites WVP and E′ values for carbon nanotubes content as low as 0.05 wt%.     

Effect of cytoplasmic lipid content on in vitro developmental efficiency of bovine IVP embryos

The objective was to evaluate the effect of cytoplasmic lipid content on the embryonic developmental efficiency of bovine in vitro embryo production (IVP) embryos. Ovaries from Korean native cows (Bos taurus coreanae) were collected from a local abattoir, and cumulus-oocyte complexes (COCs) were recovered from follicles 2 to 8 mm in diameter. The oocytes were divided into three groups, dependent on their cytoplasm color: pale color (PC), brown color (BC), and dark color (DC). The COCs were fertilized using frozen-thawed semen from a single Hanwoo bull. Based on measurement of the cytoplasmic color intensity of oocytes after 22 h of in vitro maturation (IVM), the DC group had lower (P < 0.05) color intensity than that in the BC and PC groups (56.3 ± 2.7, 93.3 ± 5.1, and 123.9 ± 12.0, respectively). Based on MitoTracker Green FM staining, the number of mitochondria in the DC (170.1 ± 31.2) group was significantly higher than that in the BC (137.5 ± 30.8) and PC (105.5 ± 25.3) groups. The cleavage rate in the DC (81.5%) group was also higher than that in the PC (50.4%) group (P < 0.05), as was the development rate to blastocyst stage (18.9% vs. 9.8%). Finally, cell numbers of blastocysts in the DC (150.8 ± 28.0) group were higher (P < 0.05) than that in the BC (107.6 ± 17.8) and PC (80.5 ± 12.3) groups. In conclusion, cytoplasm color was a useful selection parameter for abattoir-derived oocytes destined for IVP.     

Liposomes as carriers of the lipid soluble antioxidant resveratrol: Evaluation of amelioration of oxidative stress by additional antioxidant vitamin

Aim

Resveratrol (RES) is a well-known antioxidant, yet in combination with other antioxidant vitamins, it was found to be more effective than any of these antioxidants alone. Present work aims to compare the antioxidant actions of resveratrol with and without vitamin C following delivery as liposomes tested using chemical and cellular antioxidative test systems.

Main methods

Liposomes were prepared by the thin film hydration method and characterised for percent drug entrapment (PDE), Z-average mean size (nm), polydispersity index (PDI) and zeta potential. Antioxidative capacity was determined by studying the inhibition of AAPH induced luminol enhanced chemiluminescence and inhibition of ROS production in isolated blood leukocytes. Intracellular oxygen-derived radicals were measured using flow cytometry with buffy coats (BC) and human umbilical vein endothelial cells using H₂DCF-DA dye.

Key findings

Particle size varied from 134.2 ± 0.265 nm to 103.3 ± 1.687 nm; PDI ≤ 0.3; zeta potential values were greater than − 30 mV and PDE ≥ 80%. Radical scavenging effect was enhanced with liposomal systems; oxidative burst reaction in BC was inhibited by liposomal formulations, with the effect slightly enhanced in presence of vitamin C. Reduction in reactive oxygen species (ROS) production during spontaneous oxidative burst of BC and incubation of HUVECs with H₂O₂ further intensified the antioxidative effects of pure RES and liposomal formulations.

Significance

The present work clearly shows that the antioxidative effects of resveratrol loaded into liposomes are more pronounced when compared to pure resveratrol. Liposomal resveratrol is even active within the intracellular compartments as RES could effectively quench the intracellular accumulation of ROS.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

Preparation and characterization of nano-hydroxyapatite/chitosan cross-linking composite membrane intended for tissue engineering

In this paper, a series of nano-hydroxyapatite(n-HA)/chitosan cross-linking composite membranes (n-HA; 0, 5, 10, 15, 20 and 30 wt%) were successfully developed by a simple casting/solvent evaporation method. n-HA with size about 20 nm in vertical diameter and about 100 nm in horizontal diameter was successfully synthesized by a hydro-thermal precipitation method, and then dispersed into chitosan/genipin solution with the aid of continuous ultrasound to develop n-HA/chitosan cross-linking composite membranes. The detailed characterizations including Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), water adsorption and tensile test were performed. With the analysis of FTIR spectra and TGA spectra, it suggested that there was existence of possible interactions between polymer and n-HA. Meanwhile, the n-HA content was greatly effected on the morphology as well as the tensile property of composite membrane. In vitro cytotoxicity test suggested that the developed n-HA/chitosan cross-linking composite membrane was non-cytotoxicity against L929 cells after 24 h's incubation might be suitable for further in vivo application.     

Association of IL-12, IL-18 variants and serum IL-18 with bladder cancer susceptibility in North Indian population

IL-12 and IL-18 are immunomodulatory cytokines that play important roles in host immune response against cancers. Variation in DNA sequence in gene promoter may lead to altered IL-18 production and/or activity, and hence can modulate an individual's susceptibility to BC. To test this hypothesis, we investigated the relationship of IL-18 gene promoter −137 G/C and −607C/A polymorphisms and IL12 (− 16974) A/C with the risk of BC in North Indian population. Polymorphisms in IL-18 and IL-12 genes were analyzed in 200 BC patients and 200 age, ethnicity and sex-matched controls, using restriction fragment length polymorphism-polymerase chain reaction (PCR-RFLP) and amplification refractory mutation specific-polymerase chain reaction (ARMS) method. The concentrations of IL-18 in serum were determined by ELISA. Significant association was observed with IL18 (− 137) G/C heterozygous genotype (GC) with 1.96 folds risk of BC as well at C allele carrier and variant C allele having 2 fold and 1.6 fold risk for BC respectively. IL18 (− 607) C/A, heterozygous CA genotype also showed a high risk (OR = 1.59) for BC. While IL12 (− 16974) A/C heterozygote genotype and C allele carrier demonstrated reduced risk of BC. Hetero genotype of IL18 (− 137) G/C was associated with risk of recurrence (HR = 2.35) in superficial BC patients receiving BCG treatment thus showing least survival. The distributions of IL-18 gene haplotypes were not significantly different between patients and controls. Serum IL-18 levels were significantly higher in BC patients than in the healthy subjects (p = 0.025). Serum IL-18 levels was also significantly associated with IL18 (− 137) G/C in heterozygous genotype (GC) (p = 0.048). Our results suggest that IL-18 gene polymorphism contributes to bladder cancer risk whereas IL-12 is protective. A relation between IL18 (− 137) G/C in heterozygous genotype with elevated IL-18 serum level and bladder cancer risk has been registered in the present study.     

Utilization of residues from agro-forest industries in the production of high value bacterial cellulose

Bacterial cellulose (BC), a very peculiar form of cellulose, is gaining considerable importance due to its unique properties. In this study, several residues, from agro-forestry industries, namely grape skins aqueous extract, cheese whey, crude glycerol and sulfite pulping liquor were evaluated as economic carbon and nutrient sources for the production of BC. The most relevant BC amounts attained with the residues from the wine and pulp industries were 0.6 and 0.3 g/L, respectively, followed by biodiesel crude residue and cheese whey with productions of about, 0.1 g/L after 96 h of incubation. Preliminary results on the addition of other nutrient sources (yeast extract, nitrogen and phosphate) to the residues-based culture media indicated that, in general, these BC productions could be increased by ∼200% and ∼100% for the crude glycerol and grape skins, respectively, after the addition organic or inorganic nitrogen.     

Preparation and characterization of glycerol plasticized-pea starch/ZnO–carboxymethylcellulose sodium nanocomposites

Among natural polymers, starch is one of the most promising biodegradable materials because it is a renewable bioresource that is universally available and of low cost. However, the properties of starch-based materials are not satisfactory. One approach is the use of nano-filler as reinforcement for starch-based materials. In this paper, a nanocomposite is prepared using ZnO nanoparticles stabilized by carboxymethylcellulose sodium (CMC) as the filler in glycerol plasticized-pea starch (GPS) matrix by the casting process. According to the characterization of ZnO–CMC particles with Fourier transform infrared (FTIR), Ultraviolet–visible (UV–vis), X-ray diffraction (XRD), transmission electron microscope (TEM) and thermogravimetric analysis (TG), ZnO (about 60 wt%) is encapsulated with CMC (about 40 wt%) in ZnO–CMC particles with the size of about 30–40 nm. A low loading of ZnO–CMC particles can obviously improve the pasting viscosity, storage modulus, the glass transition temperature and UV absorbance of GPS/ZnO–CMC nanocomposites. When the ZnO–CMC contents vary from 0 to 5 wt%, the tensile yield strength increase from 3.94 MPa to 9.81 MPa, while the elongation at break reduce from 42.2% to 25.8%. The water vapor permeability decrease from 4.76 × 10⁻¹⁰ to 1.65 × 10⁻¹⁰ g m⁻¹ s⁻¹ Pa⁻¹.     

Hydrophobically modified alginate for emulsion of oil in water

Dodecanol was covalently coupled to sodium alginate (NaAlg) via ester functions using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC-HCl) as a coupling reagent to provide an amphiphilic dodecanol alginate (DA) for subsequent use in oil-in-water (O/W) emulsion application. The structure of DA was confirmed by FT-IR spectrometry. The stability of the emulsions prepared with different concentrations (0.3-1.2 wt%) of DA or 1.0 wt% NaAlg was evaluated by measuring droplet size, microstructure, viscosity and creaming. The results showed that the emulsions containing 1.0 wt% NaAlg, 0.3 and 0.5 wt% DA were unstable and the emulsions containing 0.8-1.2 wt% DA presented better stability during storage.     

A lactate biosensor based on lactate dehydrogenase/nictotinamide adenine dinucleotide (oxidized form) immobilized on a conducting polymer/multiwall carbon nanotube composite film

An amperometric lactate biosensor was developed based on a conducting polymer, poly-5,2′-5′,2′′-terthiophene-3′-carboxylic acid (pTTCA), and multiwall carbon nanotube (MWNT) composite on a gold electrode. Lactate dehydrogenase (LDH) and the oxidized form of nicotinamide adenine dinucleotide (NAD⁺) were subsequently immobilized onto the pTTCA/MWNT composite film. The modified electrode was characterized by quartz crystal microbalance (QCM), scanning electron microscopy (SEM), and electrochemical experiments. The detection signal was amplified by the pTTCA/MWNT assembly onto which a sufficient amount of enzyme was immobilized and stabilized by the covalent bond formation between the amine groups of enzyme and the carboxylic acid groups of the pTTCA/MWNT film. Experimental parameters affecting the sensor responses, such as applied potential, pH, and temperature, were assessed and optimized. Analytical performances and dynamic ranges of the sensor were determined, and the results showed that the sensitivity, stability, and reproducibility of the sensor improved significantly using pTTCA/MWNT composite film. The calibration plot was linear (r² = 0.9995) over the range of 5 to 90 μM. The sensitivity was approximately 0.0106 μA/μM, with a detection limit of 1 μM, based on a signal/noise ratio of 3. The applicability of the sensor for the analysis of l-lactate concentration in commercial milk and human serum samples was demonstrated successfully.     

Development of cesium phosphotungstate salt and chitosan composite membrane for direct methanol fuel cells

A novel composite membrane has been developed by doping cesium phosphotungstate salt (Cs_xH_3−xPW₁₂O₄₀ (0 ≤ x ≤3), Cs_x-PTA) into chitosan (CTS/Cs_x-PTA) for application in direct methanol fuel cells (DMFCs). Uniform distribution of Cs_x-PTA nanoparticles has been achieved in the chitosan matrix. The proton conductivity of the composite membrane is significantly affected by the Cs_x-PTA content in the composite membrane as well as the Cs substitution in PTA. The highest proton conductivity for the CTS/Cs_x-PTA membranes was obtained with x = 2 and Cs₂-PTA content of 5 wt%. The value is 6 × 10⁻³ S cm⁻¹ and 1.75 × 10⁻² S cm⁻¹ at 298 K and 353 K, respectively. The methanol permeability of CTS/Cs₂-PTA membrane is about 5.6 × 10⁻⁷, 90% lower than that of Nafion-212 membrane. The highest selectivity factor (φ) was obtained on CTS/Cs₂-PTA-5 wt% composite membrane, 1.1 × 10⁴/S cm⁻³ s. The present study indicates the promising potential of CTS/Cs_x-PTA composite membrane as alternative proton exchange membranes in direct methanol fuel cells.     

Development of pH-sensitive tamarind seed polysaccharide-alginate composite beads for controlled diclofenac sodium delivery using response surface methodology

The present study deals with the development of novel pH-sensitive tamarind seed polysaccharide (TSP)-alginate composite beads for controlled diclofenac sodium delivery using response surface methodology by full 3² factorial design. The effect of polymer-blend ratio (sodium alginate:TSP) and cross-linker (CaCl₂) concentration on the drug encapsulation efficiency (DEE, %) and drug release from diclofenac sodium loaded TSP-alginate composite beads prepared by ionotropic gelation was optimized. The observed responses were coincided well with the predicted values by the experimental design. The DEE (%) of these beads containing diclofenac sodium was within the range between 72.23 ± 2.14 and 97.32 ± 4.03% with sustained in vitro drug release (69.08 ± 2.36-96.07 ± 3.54% in 10 h). The in vitro drug release from TSP-alginate composite beads containing diclofenac sodium was followed by controlled-release pattern (zero-order kinetics) with case-II transport mechanism. Particle size range of these beads was 0.71 ± 0.03-1.33 ± 0.04 mm. The swelling and degradation of the developed beads were influenced by different pH of the test medium. The FTIR and NMR analyses confirmed the compatibility of the diclofenac sodium with TSP and sodium alginate used to prepare the diclofenac sodium loaded TSP-alginate composite beads. The newly developed TSP-alginate composite beads are suitable for controlled delivery of diclofenac sodium for prolonged period.     

Poly(3-hydroxubutyrate-co-4-hydroxubutyrate)/bacterial cellulose composite porous scaffold: Preparation, characterization and biocompatibility evaluation

Bio-composite scaffolds were prepared by freeze-drying using poly(3-hydroxubutyrate-co-4-hydroxubutyrate) (P(3HB-co-4HB)) and bacterial cellulose (BC) as raw materials and trifluoroacetic acid (TFA) as co-solvent. The characteristics of the composite scaffold were investigated by field emission scanning electron microscopy (FESEM), Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), water contact angle measurement and tensile testing. Preliminary biodegradation test was performed for P(3HB-co-4HB) and P(3HB-co-4HB)/BC composite scaffold in buffer solution and enzyme solution. The biocompatibility of the composite scaffold was preliminarily evaluated by cell adhesion studies using Chinese Hamster Lung (CHL) fibroblast cells. The cells incubated with composite scaffold for 48 h were capable of forming cell adhesion and proliferation, which showed better biocompatibility than pure P(3HB-co-4HB) scaffold. Thus, the prepared P(3HB-co-4HB)/BC composite scaffold was bioactive and may be suitable for cell adhesion/attachment suggesting that these scaffolds can be used for wound dressing or tissue-engineering scaffolds.     

Glyoxal causes inflammatory injury in human vascular endothelial cells

To explore mechanisms of diabetes-associated vascular endothelial cells (ECs) injury, human umbilical vein ECs were treated for 24 h with high glucose (HG; 26 mM), advanced glycation end-products (AGEs; 100 μg/ml) or their intermediate, glyoxal (GO: 50-5000 μM). HG and AGEs had no effects on ECs morphology and inflammatory states as measured by vascular cell adhesion molecule (VCAM)-1 and cyclooxygenase (COX)-2 expressions. GO (500 μM, 24 h) induced cytotoxic morphological changes and protein expression of COX-2 but not VCAM-1. GO (500 μM, 24 h) activated ERK but not JNK, p38 or NF-κB. However, ERK inhibitor PD98059 was ineffective to GO-induced COX-2. While EUK134, synthetic combined superoxide dismutase/catalase mimetic, had no effect on GO-mediated inflammation, sodium nitroprusside inhibited it. The present results indicate that glyoxal, a metabolite of glucose might be a more powerful inducer for vascular ECs inflammatory injury. Nitric oxide but not anti-oxidant is preventive against GO-mediated inflammatory injury.     

Association of PARP-1, NF-κB,NF-κBIA and IL-6, IL-1β and TNF-α with Graves Disease and Graves Ophthalmopathy

Background

Graves Disease (GD) is an autoimmune disorder affected by an interaction of multiple genes such as Nuclear Factor-κB (NF-κB), Nuclear Factor-κB Inhibitor (NF-κBIA), Poly (ADP-ribose) polymerase-1 (PARP-1) and cytokines like Interleukin-1β (IL-1β), Interleukin-6 (IL-6) and Tumor Necrosis Factor-α (TNF-α) and mostly accompanied by an ocular disorder, Graves Ophthalmopathy (GO). We hypothesize that there is a relationship between GD, GO, polymorphisms of inflammatory related genes and their association with cytokines, which may play important roles in autoimmune and inflammatory processes.

Subjects and methods

To confirm our hypothesis, we studied the polymorphisms and cytokine levels of 120 patients with GD and GO using PCR-RFLP and ELISA methods, respectively.

Results

We found that patients with GG genotype and carriers of G allele of PARP-1 G1672A polymorphism are at risk in the group having GD (p = 0.0007) while having GA genotype may be protective against the disease. PARP-1 C410T polymorphism was found to be associated with GO by increasing the risk by 1.7 times (p = 0.004). Another risk factor for development of GO was the polymorphism of del/ins of NFkB1 gene (p = 0.032) that increases the risk by 39%. Levels of cytokines were also elevated in patients with GD, but no association was found between levels of cytokines and the development of GO as there was no change in levels of cytokines.

Conclusions

We suggest that, PARP-1 and NFkB1 gene polymorphisms may be risk factors for developing Graves Disease and Ophthalmopathy.