Beneficial and preventive effect of chitin nanofibrils in a dextran sulfate sodium-induced acute ulcerative colitis model

Chitin nanofibrils, which are prepared from dried crab shells by a grinding method, are newly developed natural materials with uniform widths of approximately 10-20 nm. The bioactivities of chitin nanofibrils have not been investigated. In this study, we examined the preventive effects of chitin nanofibrils in a mouse model of dextran sulfate sodium (DSS)-induced acute ulcerative colitis. The results indicated that chitin nanofibrils improved clinical symptoms and suppressed ulcerative colitis. Furthermore, chitin nanofibrils suppressed myeloperoxidase activation in the colon and decreased serum interleukin-6 concentrations. Conversely, chitin powder did not suppress DSS-induced acute ulcerative colitis. Our results suggested that chitin nanofibrils have potential as a functional substance for inflammatory bowel disease patients.     

Synthesis, characterization and thermal properties of chitin-g-poly(epsilon-caprolactone) copolymers by using chitin gel

Chitin is known to be natural polymer and it is non-toxic, biodegradable and biocompatible. The chitin-g-poly(epsilon-caprolactone) (chitin-g-PCL) copolymer was prepared by the ring-opening polymerization of epsilon-caprolactone onto chitin gel in the presence of tin(II) 2-ethylhexanoate catalyst by bulk polymerization method under homogeneous system. The prepared copolymer were characterized by FT-IR, (13)C NMR, thermogravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM), solubility and X-ray diffraction (XRD). The degree of substitution of chitin-g-PCL copolymer was found to be 0.48. The TGA analysis showed that chitin-g-PCL was slightly less thermal stability than original chitin. It was due to the grafting of PCL reduced the crystalline structure of chitin. DTA analysis of chitin-g-PCL showed the two exothermic peaks between 300 and 400 degrees C. The first peak at 342 degrees C was due to chitin peak and the second peak was due to PCL. These results suggested that chitin and PCL chains were mixed well at a molecular level. The XRD pattern analysis of chitin-g-PCL showed a weak and broader peak, which demonstrated that the conjugation of PCL with chitin suppressed the crystallization of both chitin and PCL to some extent. The SEM studies showed that the chitin gel seems have a smooth surface morphology, but the chitin-g-PCL showed slightly rough morphology due to the grafting of PCL into chitin. The surface morphology studies also confirmed the grafting reaction.     

Morphology and properties of soy protein isolate thermoplastics reinforced with chitin whiskers

Environmentally friendly thermoplastic nanocomposites were successfully developed using a colloidal suspension of chitin whiskers as a filler to reinforce soy protein isolate (SPI) plastics. The chitin whiskers, having lengths of 500 +/- 50 nm and diameters of 50 +/- 10 nm on average, were prepared from commercial chitin by acid hydrolysis. The dependence of morphology and properties on the chitin whiskers content in the range from 0 to 30 wt % for the glycerol plasticized SPI nanocomposites was investigated by dynamic mechanical thermal analysis, scanning electron microscopy, swelling experiment, and tensile testing. The results indicate that the strong interactions between fillers and between the filler and SPI matrix play an important role in reinforcing the composites without interfering with their biodegradability. The SPI/chitin whisker nanocomposites at 43% relative humidity increased in both tensile strength and Young's modulus from 3.3 MPa for the SPI sheet to 8.4 MPa and from 26 MPa for the SPI sheet to 158 MPa, respectively. Further, incorporating chitin whisker into the SPI matrix leads to an improvement in water resistance for the SPI based nanocomposites.     

Chitin nanofibrils for rapid and efficient removal of metal ions from water system

Joint mechanical defibrillation was successfully used to downsize chitin micro-particles (CMP) into nanofibrils without changing its chemical or crystalline structure. The fine chitin nanofibrils (CNF) bearing width of about 50 nm and length of more than 1 μm were then developed as heavy metal ion sorbents. The uptake performance of CNF dependent on pH, ionic concentration, time, and temperature was investigated. Results show that fixation amount of Cd(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III) on CNF was up to 2.94, 2.30, 2.22, 2.06, 1.46, and 0.31 mmol/g, respectively, much higher than CMP due to high specific surface area and widely distributed pores of CNF. Adsorption kinetics of CMP and CNF followed pseudo-second-order model and Freundlich isotherm although CNF exhibited higher rate constant and sorption capacity than that of CMP. The defibrillated CNF is renewable, feasible, easily recyclable, and is thought as good candidate for heavy metal ion treatment due to their low sorption energy, rapid and efficient uptake capacity.     

Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch

Cellulose cassava bagasse nanofibrils (CBN) were directly extracted from a by-product of the cassava starch (CS) industry, viz. the cassava bagasse (CB). The morphological structure of the ensuing nanoparticles was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), presence of other components such as sugars by high performance liquid chromatography (HPLC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) experiments. The resulting nanofibrils display a relatively low crystallinity and were found to be around 2–11 nm thick and 360–1700 nm long. These nanofibrils were used as reinforcing nanoparticles in a thermoplastic cassava starch matrix plasticized using either glycerol or a mixture of glycerol/sorbitol (1:1) as plasticizer. Nanocomposite films were prepared by a melting process. The reinforcing effect of the filler evaluated by dynamical mechanical tests (DMA) and tensile tests was found to depend on the nature of the plasticizer employed. Thus, for the glycerol-plasticized matrix-based composites, it was limited especially due to additional plasticization by sugars originating from starch hydrolysis during the acid extraction. This effect was evidenced by the reduction of glass vitreous temperature of starch after the incorporation of nanofibrils in TPSG and by the increase of elongation at break in tensile test. On the other hand, for glycerol/sorbitol plasticized nanocomposites the transcrystallization of amylopectin in nanofibrils surface hindered good performances of CBN as reinforcing agent for thermoplastic cassava starch. The incorporation of cassava bagasse cellulose nanofibrils in the thermoplastic starch matrices has resulted in a decrease of its hydrophilic character especially for glycerol plasticized sample.     

The transitions between left- and right-handed forms of poly(dG-dC).

The circular dichroism study of water/trifluoroethanol (TFE) solutions of poly(dG-dC) has revealed the following: The polynucleotide is present as a B form up to a TFE content of 60% (v/v) or less. Then, a cooperative transition into a left-handed Z form occurs. Within the region of 66-78% TFE, a continuous non-cooperative change is going on which can be attributed to an intrafamily transition within the family of Z forms. At last, in the interval of 80-84% TFE, a second cooperative transition, probably, Z - A is realized. Both transitions, Z - A and Z - B, show slow kinetics (10-60 min) while the direct transitions from the A to B form taking less than 10 sec. The length of cooperativity for the B - Z transition, Vo = 25 base pairs was estimated using spermine molecules. Spermine was found to induce the B to Z transition in the (dG-dC) sequences even in the absence of TFE which might be biologically interesting.     

Multifunctional coating films by layer-by-layer deposition of cellulose and chitin nanofibrils

An environmentally benign surface modification process for plastic films was demonstrated by fabricating composite coatings through layer-by-layer assembly with green solid materials: aqueous dispersions of two kinds of crystalline polysaccharide nanofibrils. Anionic cellulose nanofibrils were obtained by the TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation of native cellulose, while cationic β-chitin nanofibrils were prepared by the protonation of squid pen chitin. Uniform layer depositions, driven by electrostatic attraction and enhanced by hydrogen bonding, were observed on silicon wafers and then reproduced onto poly(ethylene terephthalate) films. Contact angle measurements and dyeing tests on the resulting films revealed their hydrophilic nature and the sorption of both charged and uncharged substances. Antireflection properties were also confirmed via the light transmittance measurements. As might be presumed from all these properties, this composite coating exhibited its unique behavior largely due to its structure, which was distinct from both those of nanofibril cast films and polymer films.     

Induction of 'molten globule' like state in acid-denatured state of unmodified preparation of stem bromelain: implications of disulfides in protein folding

A denatured state of unmodified preparation of stem bromelain representing a structureless form has been characterized at pH 2.0 and the effect of increasing concentration of TFE on the acid-denatured state has been investigated by circular dichroism (CD), fluorescence emission spectroscopy and binding of the hydrophobic dye, 1-anilino-8-naphthalene sulfonic acid (ANS). Far-UV CD spectra show considerable accumulation of secondary structure when the acid-denatured bromelain is subjected to 70% (v/v) TFE and exhibited close resemblance to spectral features of those of pH 7.0 preparation. Interestingly, the acid-denatured state also regained some tertiary structure/interactions, with increasing concentration of TFE and at 60% (v/v) TFE, these approached almost those of the native like state. However, further increase to 70% (v/v) TFE resulted in complete loss of tertiary structure/interactions. Tryptophan fluorescence emission studies also suggested the induction of significant compact structure at 60% (v/v) concentration of TFE. In addition the acid-denatured state showed enhanced binding of ANS in presence of 60% (v/v) TFE. Taken together these observations suggest the existence of a molten globule state in acid-denatured bromelain between 60 and 70% (v/v) TFE. A similar molten globule state under identical conditions has been identified in reduced and carboxymethylated preparation of stem bromelain as reported in our earlier communication [Arch. Biochem. Biophys. 413 (2003) 199]. Comparison suggests unfolding/folding behavior of the bromelain to be independent of the intactness of the disulfide bonds.     

Evaluation of biocompatibility and mechanical behavior of polyurethane elastomers based on chitin/1,4-butane diol blends

Chitin based polyurethane elastomers with potential as biomedical implants with tunable mechanical properties were synthesized by step growth polymerization techniques using poly(epsilon-caprolactone) (PCL) and 4,4'-diphenylmethane diisocyanate (MDI). The prepolymer was extended with different mass ratios of chitin and 1,4-butane diol (BDO). Molecular characterization was done using FTIR, 1H NMR and 13C NMR techniques. The mechanical properties of these polymers were improved with increase in the chitin contents. Optimum mechanical properties were obtained from elastomers extended with chitin in comparison to elastomers extended with BDO. Cytotoxicity of the synthesized polyurethane samples was affected by varying the chitin contents in the chemical composition of the final polyurethane (PU). It is revealed that the final polymers extended with chitin are preferred candidates for surgical threads with on going investigations into their in vitro biocompatibility and non-toxicity.     

Conformational changes and inactivation of bovine carbonic anhydrase II in 2,2,2-trifluoroethanol solutions

Changes in unfolding and enzymatic activity of bovine carbonic anhydrase II (BCA II) in different concentrations of 2,2,2-trifluoroethanol (TFE) were investigated by 1-anilino-8-naphthalenesulfonate (ANS) fluorescence emission spectra, far-UV CD spectra, and enzyme activity. The results showed that the activity and conformation of BCA II changed according to the concentration of TFE. Significant aggregation was observed when BCA II was denatured at TFE concentrations between 10 and 35% (v/v). When the concentration of TFE exceeded 40%, the aggregation of BCA II was not very obvious. The activity of BCA II decreased almost to zero as the TFE concentration reached 26%. The ANS fluorescence spectra indicated the tertiary conformations of BCA II were more stable in solutions with TFE concentrations lower than 15% (v/v) and higher than 40% (v/v). Far-UV CD spectra showed that high concentrations (higher than 25%) of TFE could induce BCA II to form more alpha-helix structures and caused these structures to be in relatively stable states. The native conformation of BCA II being destroyed after its inactivity indicated that the active sites of BCA II is situated in a limited region and has more flexibility than the whole enzyme molecule.     

Conformational changes and inactivation of bovine carbonic anhydrase II in 2,2,2-Trifluoroethanol solutions

Changes in unfolding and enzymatic activity of bovine carbonic anhydrase II (BCA II) in different concentrations of 2,2,2-trifluoroethanol (TFE) were investigated by 1-anilino-8-naphthalenesulfonate (ANS) fluorescence emission spectra, far-UV CD spectra, and enzyme activity. The results showed that the activity and conformation of BCA II changed according to the concentration of TFE. Significant aggregation was observed when BCA II was denatured at TFE concentrations between 10 and 35% (v/v). When the concentration of TFE exceeded 40%, the aggregation of BCA II was not very obvious. The activity of BCA II decreased almost to zero as the TFE concentration reached 26%. The ANS fluorescence spectra indicated the tertiary conformations of BCA II were more stable in solutions with TFE concentrations lower than 15% (v/v) and higher than 40% (v/v). Far-UV CD spectra showed that high concentrations (higher than 25%) of TFE could induce BCA II to form more α-helix structures and caused these structures to be in relatively stable states. The native conformation of BCA II being destroyed after its inactivation indicated that the active site of BCA II is situated in a limited region and has more flexibility than the whole enzyme molecule.     

Alcohol induced structural and dynamic changes in β-lactoglobulin in aqueous solution: A neutron scattering study

Structural and dynamic properties of β-lactoglobulin (β-LG) were revealed as a function of alcohol concentration in ethanol- and trifluoroethanol(TFE)-water mixtures with circular dichroism (CD), small-angle neutron scattering (SANS) and quasi-elastic neutron scattering (QENS). The CD spectra showed that an increase in TFE concentration promotes the formation of the β-sheet structure of β-LG. The SANS-intensities were fitted using form factors for two attached spheres for the native and native-like states of the protein. At higher alcohol concentrations, where aggregation takes place, a form factor modelling diffusion limited colloidal aggregation (DLCA) was employed. The QENS-data were analyzed in terms of internal motions for all alcohol concentrations. While low concentrations of TFE (10% (v/v)) lead to an increase of the mean square amplitudes of vibrations and a retention of a native-like structure - but not to an increase of the characteristic radius of proton diffusion processes a. Addition of 20% (v/v) of TFE induces aggregation, going along with a further increase of . Further increase of TFE concentration to 30% (v/v) changes the nanoscale structure of the oligomeric nucleate, but induces no further significant changes in . The present study underlines the necessity of methods sensitive to the dynamics of a system to obtain a complete picture of a molecular process.     

XRD studies of UV-irradiated chitin based polyurethane elastomers

Chitin based polyurethane (PU) elastomers constituted on 4,4´-diphenylmethane diisocyanate (MDI), poly(ε-caprolactone) (PCL) and extended with blends of chitin/1,4-butane diol were synthesized via two step polymerization technique. The synthesized samples were irradiated for 50, 100 and 200 h in an UV exposure chamber as such the spectral distribution of the light is good match for terrestrial solar radiation. The crystalline behavior of the irradiated PU samples were investigated by X-ray diffraction (XRD), differential scanning calorimetery (DSC) and dynamic mechanical thermal analysis (DMTA) techniques. The effect of irradiation time and chitin contents on crystallinity were studied and investigated. The maximum decrease in the crystalline behavior of samples after irradiation observed by XRD, DSC and tan δ peaks were found for the PU samples extended with lower contents of chitin (chitin/BDO; 0/100). In comparison with irradiation times the 200 h irradiation showed maximum change in the crystalline behavior.     

TEMPO-mediated oxidation of β-chitin to prepare individual nanofibrils

TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation was applied to β-chitins, originating from tubeworm and squid pen, to prepare chitin nanofibrils. Water-insoluble fractions of the TEMPO-oxidized β-chitins were obtained in various ratios by controlling the addition level of NaClO used as the primary oxidant in the oxidation. The water-insoluble fractions of the TEMPO-oxidized tubeworm β-chitins, when they had carboxylate groups of 0.18–0.25 mmol/g, were successfully converted to highly viscous and translucent gels by disintegration in water. The gels consisted of mostly individual nanofibrils 20–50 nm in width and at least several microns in length. On the other hand, the water-insoluble fractions of the TEMPO-oxidized squid pen β-chitins could be transformed to neither transparent nor translucent dispersions under any oxidation or disintegration conditions used. When sufficient amounts of NaClO were used, both β-chitins were completely oxidized to the corresponding water-soluble polyuronic acids by oxidation of all C6 primary hydroxyls to carboxylate groups.     

Association of thin filaments into thick filaments revealing the structural hierarchy of amyloid fibrils

Beta2-Microglobulin (beta2-m) is a major structural component of dialysis-related amyloid fibrils. Kozhukh et al. [J. Biol. Chem. 277 (2002) 1310] prepared a series of peptide fragments of beta2-m by the protease digestion and examined their ability to form amyloid fibrils in citrate buffer at pH 2.5. Among various peptides, a 22-residue K3 peptide corresponding to Ser20-Lys41 spontaneously formed amyloid fibrils in aqueous solution. This peptide also formed amyloid protofibrils in 20% (v/v) 2,2,2-trifluoroethanol (TFE). To investigate the influence of solvent conditions on fibril formation, we studied their structures by atomic force microscopy. In aqueous solution, fibrils had a diameter of 4 or 8 nm and tended to cluster each other. On the other hand, protofibrils in 20% (v/v) TFE had a diameter of 2 nm with no tendency of clustering. Intriguingly, when the K3 protofibrils were transferred from 20% (v/v) TFE to aqueous solution, some of them associated to form thicker fibrils with a diameter of 4-15 nm and a left-handed helical twist. TFE is a hydrophobic solvent, so that hydrophobic interactions between molecules may be weakened. The results suggest that the fibrils in aqueous conditions are formed by the cooperative association of protofibrils at the growing ends of the fibrils, in which hydrophobic interactions play a major role.     

Surface characteristics of UV-irradiated chitin-based polyurethane elastomers

Chitin-based polyurethane elastomers (PUEs) constituted on 4,4′-diphenylmethane diisocyanate (MDI), poly(ε-caprolactone) (PCL) and extended with blends of chitin/1,4-butane diol were first synthesized via two step polymerization technique and then irradiated for 50, 100 and 200 h in an UV exposure chamber as such the spectral distribution of the light is good match for terrestrial solar radiation. The surface properties of the irradiated PU samples were investigated by contact angle measurements, surface free energy and water absorption (%), total work of water adhesion to polymer and equilibrium degree of swelling. The effects of UV-irradiation time and chitin contents in chain extenders (CE) proportion on surface properties were investigated. Results of the aforementioned surface techniques revealed that the UV-irradiated polyurethane samples were affected by varying the UV exposure period.     

Evaluation of biocompatibility and mechanical behavior of chitin-based polyurethane elastomers. Part-II: Effect of diisocyanate structure

Chitin-based polyurethane elastomers having potential for biomedical applications with tunable mechanical properties were synthesized by step growth polymerization techniques using poly(?-caprolactone) (PCL) with different diisocyanates. The prepolymer was extended using chitin and/or 1,4-butane diol (BDO). The structures of the resulted polymers were determined by Fourier transform infrared (FTIR), ¹H NMR and ¹³C NMR spectroscopic techniques. The effect of structure of diisocyanates and chain extenders on mechanical properties and in vitro biocompatibility were investigated. The results revealed that the final polymers extended with chitin are preferred candidates for surgical threads with on going investigations into their in vitro biocompatibility and non-toxicity.     

Human tropoelastin sequence: Dynamics of polypeptide coded by exon 6 in solution

Calorimetric studies were performed on exon 6 in powdered form and in solution [water and 2,2,2‐trifluoroethanol (TFE), a structure‐inducing solvent or cosolvent]. Dynamic dielectric spectroscopy (DDS) analyses were realized in water and 20% TFE. The major role of solvent–peptide organization is evidenced with these techniques. Calorimetric measurements reveal the structural water organization around the polypeptide as well as the presence of hydrophobic interactions in TFE solution. Dielectric measurements showed for exon 6/water a decrease of relaxations times of bulk solvent implying a faster dynamics with a slight increase of the activation entropy, suggesting that exon 6 probably creates disorder within the solvent. For TFE/water mixtures, an influence of exon 6 on its environment was seen with a relaxation associated with the exon 6/solvent interactions reinforced by storage of 72 h. Finally, exon 6/solvent interactions were clearly observed with additionof TFE. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 943–952, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Plasmodesmata: intercellular tunnels facilitating transport of macromolecules in plants

The major structural and enzymatically active protein in spicules from siliceous sponges, e.g., for Suberites domuncula studied here, is silicatein. Silicatein has been established to be the key enzyme that catalyzes the formation of biosilica, a polymer that represents the inorganic scaffold for the spicule. In the present study, it is shown, by application of high-resolution transmission and scanning transmission electron microscopy that, during the initial phase of spicule synthesis, nanofibrils with a diameter of around 10 nm are formed that comprise bundles of between 10 and 20 nanofibrils. In intracellular vacuoles, silicasomes, the nanofibrils form polar structures with a pointed tip and a blunt end. In a time-dependent manner, these nanofibrillar bundles become embedded into a Si-rich matrix, indicative for the formation of biosilica via silicatein molecules that form the nanofibrils. These biosilicified nanofibrillar bundles become extruded from the intracellular space, where they are located in the silicasomes, to the extracellular environment by an evagination process, during which a cellular protrusion forms the axial canal in the growing spicule. The nanofibrillar bundles condense and progressively form the axial filament that becomes localized in the extracellular space. It is concluded that the silicatein-composing nanofibrils act not only as enzymatic silica bio-condensing platforms but also as a structure-giving guidance for the growing spicule.