25-Hydroxyvitamin D3-Loaded PLA Microspheres: In Vitro Characterization and Application in Diabetic Periodontitis Models

This study aimed at the preparation of a sustained-release 25-hydroxyvitamin D₃ (25OHD) treatment for diabetic periodontitis, a known complication of diabetes. 25OHD-loaded polylactic acid (PLA) microspheres were prepared using oil-in-water emulsion–solvent evaporation method. The prepared microspheres exhibited intact surfaces, with average sizes ranging from 42.3 to 119.4 μm. The encapsulation efficiency ranged from 79.2% (w/w) to 88.5% (w/w), and the drug content was between 15.8% (w/w) and 17.8% (w/w). Drug release from the produced microspheres followed a near-to-zero-order release pattern and lasted over 10 weeks. In an in vitro model of diabetic periodontitis, the abnormal morphological changes and the decrease in the cell viability of bone marrow stromal cells could be effectively attenuated after the 25OHD-loaded microsphere application. Additionally, in a rat model of diabetic periodontitis, alveolar bone loss was inhibited and osteoid formation in the periodontium was promoted upon 25OHD-loaded microsphere treatment. In conclusion, 25OHD-loaded PLA microspheres may provide an effective approach for the treatment of this disease.     

In Vitro and In Vivo Evaluations of PLGA Microspheres Containing Nalmefene

Poor patient compliance, untoward reactions and unstable blood drug levels after the bolus administration are impeding the pharmacotherapy for insobriety. A long-acting preparation may address these limitations. The aim of this paper was to further investigate the in vitro characteristics and in vivo performances of nalmefene microspheres. Nalmefene was blended with poly (lactide-co-glycolide) (PLGA) to prepare the target microspheres by an O/O emulsification solvent evaporation method. The prepared microspheres exhibited a controlled release profile of nalmefene in vitro over 4 weeks, which was well fitted with a first-order model. In vitro degradation study showed that the drug release in vitro was dominated by both drug diffusion and polymer degradation mechanisms. Pharmacokinetics study indicated that the prepared microspheres could provide a relatively constant of nalmefene plasma concentration for at least one month in rats. The in vivo pharmacokinetics profile was well correlated with the in vitro drug release. Pharmacodynamics studies revealed that the drug loaded microspheres could produce a long-acting antagonism efficacy on rats. These results demonstrated the promising application of injectable PLGA microspheres containing nalmefene for the long-term treatment of alcohol dependence.     

Synthesis and characterization of multifunctional poly(glycidyl methacrylate) microspheres and their use in cell separation

Multifunctional poly(glycidyl methacrylate) (PGMA) microspheres containing magnetic, fluorescent, and cancer cell-specific moieties were prepared in four steps: (i) preparation of parent PGMA microspheres by dispersion polymerization and their reaction with ethylenediamine to obtain amino groups, (ii) precipitation of iron ions (Fe²⁺ and Fe³⁺) to form Fe₃O₄ nanoparticles within the microspheres, (iii) consecutive reactions of folic acid with the amino groups on PGMA, and (iv) incorporation of fluorescein isothiocyanate into the microspheres. The microspheres were superparamagnetic, highly monodispersive, intensively fluorescent, and capable of recognizing and binding cancer cells that overexpress folic acid receptors. It was demonstrated that with these microspheres, HeLa cells could be captured from their suspension and easily moved in the direction of the externally applied magnetic field.     

Anhydride Prodrug of Ibuprofen and Acrylic Polymers

The objective of this study was to synthesize anhydride prodrugs for carboxylic-acid-bearing agents such as non-steroidal anti-inflammatory drugs, shield the carboxylic acid group from irritative effects, and obtain sustained release patterns. Ibuprofen was used as a representative drug for anhydride derivatization. Conjugates of ibuprofen with carboxylic acid moieties of different acrylic polymers were prepared by dehydration reaction using acetic anhydride. Products were characterized by infrared spectroscopy, nuclear magnetic resonance, and scanning electron microscopy followed by preparation of microspheres with different sizes from the conjugate Eudragit® L-100-ibuprofen. The drug release was monitored by high-performance liquid chromatography. Ibuprofen was bound to the polymers via an anhydride bond in high reaction yields (75–95%) with drug loading of up to 30% (w/w). These anhydride derivatives hydrolyzed and release the drug at different periods ranging from 1 to 5 days, depending on the hydrophobicity and the cross-linking of the conjugates. The release of drug from the microspheres was correlated to their size and ranged from 2 to almost 8 days. This study demonstrates the promise of anhydride prodrug for extending drug action while shielding the carboxylic acid group.     

Formulation and evaluation of mucoadhesive glipizide microspheres

The purpose of this research was to formulate and system-atically evaluate in vitro and in vivo performances of mucoadhesive microspheres of glipizide. Glipizide microspheres containing chitosan were prepared by simple emulsification phase separation technique using glutaraldehyde as a cross-linking agent. Results of preliminary trials indicate that volume of cross-linking agent, time for cross-linking, polymer-to-drug ratio, and speed of rotation affected characteristics of microspheres. Microspheres were discrete, spherical, and free flowing. The microspheres exhibited good mucoadhesive property in the in vitro wash-off test and also showed a high percentage drug entrapment efficiency. A 3² full factorial design was employed to study the effect of independent variables, polymer-to-drug ratio (X ₁), and stirring speed (X ₂) on dependent variables percentage mucoadhesion, t₈₀, drug entrapment efficiency, and swelling index. The best batch exhibited a high drug entrapment efficiency of 75% and a swelling index of 1.42; percentage mucoadhesion after 1 hour was 78%. The drug release was also sustained for more than 12 hours. The polymer-to-drug ratio had a more significant effect on the dependent variables. In vivo testing of the mucoadhesive microspheres to albino Wistar rats demonstrated significant hypoglycemic effect of glipizide.     

Multiunit Floating Drug Delivery System of Rosiglitazone Maleate: Development, Characterization, Statistical Optimization of Drug Release and In Vivo Evaluation

A multiunit floating drug delivery system of rosiglitazone maleate has been developed by encapsulating the drug into Eudragit® RS100 through nonaqueous emulsification/solvent evaporation method. The in vitro performances of microspheres were evaluated by yield (%), particle size analysis, drug entrapment efficiency, in vitro floating behavior, surface topography, drug–polymer compatibility, crystallinity of the drug in the microspheres, and drug release studies. In vitro release was optimized by a {3, 3} simplex lattice mixture design to achieve predetermined target release. The in vivo performance of the optimized formulation was evaluated in streptozotocin-induced diabetic rats. The results showed that floating microspheres could be successfully prepared with good yields (69–75%), high entrapment (78-97%), narrow size distribution, and desired target release with the help of statistical design of experiments from very small number of formulations. In vivo evaluation in albino rats suggested that floating microspheres of rosiglitazone could be a promising approach for better glycemic control.     

Alginate Microspheres Containing Temperature Sensitive Liposomes (TSL) for MR-Guided Embolization and Triggered Release of Doxorubicin

Objective

The objective of this study was to develop and characterize alginate microspheres suitable for embolization with on-demand triggered doxorubicin (DOX) release and whereby the microspheres as well as the drug releasing process can be visualized in vivo using MRI.

Methods and Findings

For this purpose, barium crosslinked alginate microspheres were loaded with temperature sensitive liposomes (TSL/TSL-Ba-ms), which release their payload upon mild hyperthermia. These TSL contained DOX and [Gd(HPDO3A)(H₂O)], a T₁ MRI contrast agent, for real time visualization of the release. Empty alginate microspheres crosslinked with holmium ions (T₂* MRI contrast agent, Ho-ms) were mixed with TSL-Ba-ms to allow microsphere visualization. TSL-Ba-ms and Ho-ms were prepared with a homemade spray device and sized by sieving. Encapsulation of TSL in barium crosslinked microspheres changed the triggered release properties only slightly: 95% of the loaded DOX was released from free TSL vs. 86% release for TSL-Ba-ms within 30 seconds in 50% FBS at 42°C. TSL-Ba-ms (76 ± 41 μm) and Ho-ms (64 ± 29 μm) had a comparable size, which most likely will result in a similar in vivo tissue distribution after an i.v. co-injection and therefore Ho-ms can be used as tracer for the TSL-Ba-ms. MR imaging of a TSL-Ba-ms and Ho-ms mixture (ratio 95:5) before and after hyperthermia allowed in vitro and in vivo visualization of microsphere deposition (T₂*-weighted images) as well as temperature-triggered release (T₁-weighted images). The [Gd(HPDO3A)(H₂O)] release and clusters of microspheres containing holmium ions were visualized in a VX₂ tumor model in a rabbit using MRI.

Conclusions

In conclusion, these TSL-Ba-ms and Ho-ms are promising systems for real-time, MR-guided embolization and triggered release of drugs in vivo.     

Using drug-loaded pH-responsive poly(4-vinylpyridine) microspheres as a new strategy for intelligent controlling of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> contamination in bioethanol fermentation

Bioethanol fermentation is usually contaminated by bacteria, especially lactic acid bacteria (LAB), thereby leading to decrease of bioethanol yield and serious economic losses. Nisin is safer for controlling of bacterial contamination than antibiotics that are widely applied in industry. Moreover, in LAB contaminative bioethanol fermentation system, consistently decreased pH value provides opportunity to realize pH value responsive material-based release of anti-bacteria substances for intelligent and persistent controlling of bacterial contamination. In this study, nisin was embedded into pH-sensitive poly(4-vinylpyridine) (P4VP) microspheres synthesized by suspension polymerization to realize intelligent controlling of Lactobacillus plantarum contamination in bioethanol fermentation. Chloramphenicol with the highest antimicrobial activity and excellent stability was chosen as the model drug to be embedded into P4VP microspheres to test the drug release behavior. The drug release curve of chloramphenicol-loaded P4VP microspheres showed sustained and pH-responsive release properties. The diameters of the microspheres ranged from 40 to 100 µm. The encapsulation efficiency of nisin into P4VP microspheres was 47.67% and the drug-loading capacity of nisin was 2.5%. Nisin-loaded P4VP microspheres were added into the simulated contaminative fermentation system, and successfully reversed the decline of bioethanol yield secondary to L. plantarum contamination. The results in this study indicated that L. plantarum contamination in bioethanol fermentation could be effectively controlled by nisin-loaded P4VP microspheres.     

Improved Bioavailability of a Water-Insoluble Drug by Inhalation of Drug-Containing Maltosyl-β-Cyclodextrin Microspheres Using a Four-Fluid Nozzle Spray Drier

We previously developed a unique four-fluid nozzle spray drier that can produce water-soluble microspheres containing water-insoluble drug nanoparticles in one step without any common solvent between the water-insoluble drug and water-soluble carrier. In the present study, we focused on maltosyl-β-cyclodextrin (malt-β-CD) as a new water-soluble carrier and it was investigated whether drug/malt-β-CD microspheres could improve the bioavailability compared with our previously reported drug/mannitol (MAN) microspheres. The physicochemical properties of bare drug microparticles (ONO-2921, a model water-insoluble drug), drug/MAN microspheres, and drug/malt-β-CD microspheres were evaluated. In vitro aerosol performance, in vitro dissolution rate, and the blood concentration profiles after intratracheal administration were compared between these formulations. The mean diameter of both drug/MAN and drug/malt-β-CD microspheres was approximately 3–5 μm and both exhibited high aerosol performance (>20% in stages 2–7), but drug/malt-β-CD microspheres had superior release properties. Drug/malt-β-CD microspheres dissolved in an aqueous phase within 2 min, while drug/MAN microspheres failed to dissolve in 30 min. Inhalation of drug/malt-β-CD microspheres enhanced the area under the curve of the blood concentration curve by 15.9-fold than that of bare drug microparticles and by 6.1-fold than that of drug/MAN microspheres. Absolute bioavailability (pulmonary/intravenous route) of drug/malt-β-CD microspheres was also much higher (42%) than that of drug/MAN microspheres (6.9%). These results indicate that drug/malt-β-CD microspheres prepared by our four-fluid nozzle spray drier can improve drug solubility and pulmonary delivery.

Electronic supplementary material

The online version of this article (doi:10.1208/s12249-012-9826-z) contains supplementary material, which is available to authorized users.KEY WORDS: 4-fluid nozzle spray drier, inhalation therapy, maltosyl-β-cyclodextrin, microparticles, water-insoluble drug     

Cellulose-Based Matrix Microspheres of Prednisolone Inclusion Complex: Preparation and Characterization

The purpose of the present investigation was to encapsulate pure prednisolone (PRD) and PRD–hydroxypropyl-β-cyclodextrin (HPβCD) complex in cellulose-based matrix microspheres. The system simultaneously exploits complexation technique to enhance the solubility of low-solubility drug (pure PRD) and subsequent modulation of drug release from microspheres (MIC) at a predetermined time. The microspheres of various compositions were prepared by an oil-in-oil emulsion–solvent evaporation method. The effect of complexation and presence of cellulose polymers on entrapment efficiency, particle size, and drug release had been investigated. The solid-state characterization was performed by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, and powder X-ray diffractometry. The morphology of MIC was examined by scanning electron microscopy. The in vitro drug release profiles from these microspheres showed the desired biphasic release behavior. After enhancing the solubility of prednisolone by inclusion into HPβCD, the drug release was easily modified in the microsphere formulation. It was also demonstrated that the CDs in these microspheres were able to modulate several properties such as morphology, drug loading, and release properties. The release kinetics of prednisolone from microspheres followed quasi-Fickian and first-order release mechanisms. In addition to this, the f ₂-metric technique was used to check the equivalency of dissolution profiles of the optimized formulation before and after stability studies, and it was found to be similar. A good outcome, matrix microspheres (coded as MIC5) containing PRD–HPβCD complex, showed sustained release of drug (95.81%) over a period of 24 h.     

Optimization and Evaluation of Gastroretentive Ranitidine HCl Microspheres by Using Factorial Design with Improved Bioavailability and Mucosal Integrity in Ulcer Model

The purpose of our investigation was to develop and optimize the drug entrapment efficiency and bioadhesion properties of mucoadhesive chitosan microspheres containing ranitidine HCl prepared by an ionotropic gelation method as a gastroretentive delivery system; thus, we improved their protective and therapeutic gastric effects in an ulcer model. A 3?×?2² full factorial design was adopted to study the effect of three different factors, i.e., the type of polymer at three levels (chitosan, chitosan/hydroxypropylmethylcellulose, and chitosan/methylcellulose), the type of solvent at two levels (acetic acid and lactic acid), and the type of chitosan at two levels (low molecular weight (LMW) and high molecular weight (HMW)). The studied responses were particle size, swelling index, drug entrapment efficiency, bioadhesion (as determined by wash-off and rinsing tests), and T _80% of drug release. Studies of the in vivo mucoadhesion and in vivo protective and healing effects of the optimized formula against gastric ulcers were carried out using albino rats (with induced gastric ulceration) and were compared to the effects of free ranitidine powder. A pharmacokinetic study in rabbits showed a significant, 2.1-fold increase in theAUC_0–24of the ranitidine microspheres compared to free ranitidine after oral administration. The optimized formula showed higher drug entrapment efficiency and mucoadhesion properties and had more protective and healing effects on induced gastric ulcers in rats than ranitidine powder. In conclusion, the prolonged gastrointestinal residence time and the stability of the mucoadhesive microspheres of ranitidine as well as the synergistic healing effect of chitosan could contribute to increasing the potential of its anti-gastric ulcer activity.     

Impact of magnetic nanofillers in the swelling and release properties of κ-carrageenan hydrogel nanocomposites

Natural polysaccharides such as κ-carrageenan are an important class of biomaterials for drug delivery. The incorporation of magnetic nanoparticles in polysaccharide hydrogels is currently being explored as a strategy to confer to the hydrogels novel functionalities valuable for specific bio-applications. Within this context, κ-carrageenan magnetic hydrogel nanocomposites have been prepared and the effect of magnetic (Fe₃O₄) nanofillers in the swelling of the hydrogels and in the release kinetics and mechanism of a model drug (methylene blue) has been investigated. In vitro release studies demonstrated the applicability of the composites in sustained drug release. The mechanism controlling the release seems to be determined by the strength of the gel network and the extent of gel swelling, both being affected by the incorporation of nanofillers. Furthermore, it was demonstrated that the release rate and profile could be tailored using variable Fe₃O₄ nanoparticles load. Thus, this seems to be a promising strategy for the development of drug delivery systems with tailored released behavior.     

Preparation and characterization of magnetic gold nanoparticles to be used as doxorubicin nanocarriers

Magnetic targeted drug delivery (MTD), using magnetic gold nanoparticles (Fe₃O₄@Au NPs) conjugated with an anti-cancer drug is a promise modality for cancer treatment. In this study, Fe₃O₄@Au NPs were prepared and functionalized with thiol-terminated polyethylene glycol (PEG), then loaded with anti-cancer drug doxorubicin (DOX). The physical properties of the prepared NPs were characterized using different techniques. Transmission electron microscopy (TEM) revealed the mono dispersed nature of Fe₃O₄@Au NPs with an average size of 20 nm which was confirmed using Dynamic light scattering (DLS) measurements. Zeta potential measurements along with UV–VIS spectroscopy demonstrated surface DOX loading on Fe₃O₄@Au NPs. Energy Dispersive X-ray Spectroscopy (EDX) assured the existence of both iron and gold elements in the prepared NPs. The paramagnetic properties of the prepared NPs were assessed by vibrating sample magnetometer (VSM). The maximum DOX-loading capacity was 100 μg DOX/mg of Fe₃O₄@Au NPs. It was found that DOX released more readily at acidic pH. In vitro studies on MCF-7 cell line elucidated that DOX loaded Fe₃O₄@Au NPs (Fe₃O₄@Au-PEG-DOX) have more potent therapeutic effect than free DOX. Knowledge gained in this study may open the door to pursue Fe₃O₄@Au NPs as a viable nanocarriers for different molecules delivery in many diagnostic and therapeutic applications.     

The in vitro and in vivo anti-tumor effects of MTX-Fe3O4-PLLA-PEG-PLLA microspheres prepared by suspension-enhanced dispersion by supercritical CO2

The in vitro and in vivo anti-tumor efficacy of methotrexate-loaded Fe3O4-poly-L-lactide-poly(ethylene glycol)-poly-L-lactide magnetic composite microspheres(MTX-Fe3O4-PLLA-PEG-PLLA MCMs,MMCMs),which were produced by co-precipitation(C)and microencapsulation(M)in a supercritical process,was evaluated at various levels:cellular,molecular,and integrated.The results at the cellular level indicate that MMCMs(M)show a better anti-proliferation activity than raw MTX and could induce morphological changes of cells undergoing apoptosis.At the molecular level,MMCMs(M)lead to a significantly higher relative mRNA expression of bax/bcl-2 and caspase-3 than MMCMs(C)at 10μg mL-1(P0.01);and the pro-caspase-3protein expression measured by Western blot analysis also demonstrates that MMCMs(M)can effectively activate pro-caspase-3.At the integrated level,mice bearing a sarcoma-180 tumor are used;in vivo anti-tumor activity tests reveal that MMCMs(M)with magnetic induction display a much higher tumor suppression rate and lower toxicity than raw MTX.Pharmacokinetic studies show that MMCMs(M)with magnetic induction significantly increase the accumulation of MTX in the tumor tissue compared with the other treatments.These results suggest that the MMCMs(M)prepared by the SpEDS process have great potential to play a positive role in the magnetic targeted therapy field.     

Reversible immobilization of glucoamylase onto magnetic chitosan nanocarriers

A simple preparation process for the monodispersed pH-sensitive core-shell magnetic microspheres was carried out consisting of chitosan self-assembled on magnetic iron oxide nanoparticles. Meanwhile, glucoamylase was immobilized as a model enzyme on this carrier of Fe₃O₄/CS microspheres by ionic adsorption. The morphology, inner structure, and high magnetic sensitivity of the resulting magnetic chitosan microspheres were studied, respectively, with a field emission scanning electron microscope (SEM), transmission electron microscope (TEM), FT-IR spectroscopy, thermogravimetric analysis (TGA), and a vibrating sample magnetometer (VSM). Subsequently, the properties of glucoamylase immobilized on the regenerated supports were also investigated by determining storage stability, pH stability, reusability, magnetic response, and regeneration of supports. The results from characterization and determination remarkably indicated that the immobilized glucoamylase obtained presents excellent storage stability, pH stability, reusability, magnetic response, and regeneration of supports. Therefore, this kind of magnetic Fe₃O₄/CS microspheres with perfect monodispersity should be an ideal support for enzyme immobilization.     

Encapsulation and modified-release of thymol from oral microparticles as adjuvant or substitute to current medications

The aim of this study was to encapsulate, thymol, in natural polymers in order to obtain (i) taste masking effect and, then, enhancing its palatability and (ii) two formulations for systemic and local delivery of herbal drug as adjuvants or substitutes to current medications to prevent and treat several human and animal diseases. Microspheres based on methylcellulose or hydroxypropyl methylcellulose phthalate (HPMCP) were prepared by spray drying technique. Microparticles were in vitro characterized in terms of yield of production, drug content and encapsulation efficiency, particle size, morphology and drug release. Both formulations were in vivo orally administered and pharmacokinetic analysis was carried out. The polymers used affect the release and, then, the pharmacokinetic profile of thymol. Encapsulation into methylcellulose microspheres leads to short half/life but bioavailability remarkably increases compared to the free thymol. In contrast, enteric formulation based on HPMCP shows very limited systemic absorption. These formulations could be proposed as alternative or adjuvants for controlling pathogen infections in human or animal. In particular, methylcellulose microspheres can be used for thymol systemic administration at low doses and HPMCP particles for local treatment of intestinal infections.     

Exenatide-loaded PLGA microspheres with improved glycemic control: In vitro bioactivity and in vivo pharmacokinetic profiles after subcutaneous administration to SD rats

A subcutaneous exenatide delivery system was developed and characterized in vitro and in vivo. The results clearly showed that the exenatide loaded PLGA microspheres prepared by using a non-aqueous processing medium had low burst release and high drug encapsulation efficiency. Exenatide loaded in the microspheres preserved its bioactivity. The pharmacokinetics parameters were determined after subcutaneous administration of microspheres to SD rats. The plasma concentration of the single dose of the sustained-release microspheres attained C_max of 108.19 ± 14.92 ng/ml at t_max of 1.33 ± 0.58 h and the t_1/2 was 120.65 ± 44.18 h. There was a linear correlation between the in vitro and in vivo release behavior (R² = 0.888). Exenatide loaded microspheres may prove to have great potential for clinical use.     

Microspheres of chitosan/carboxymethyl cashew gum (CH/CMCG): Effect of chitosan molar mass and CMCG degree of substitution on the swelling and BSA release

Chitosan/carboxymethyl cashew gum microspheres (CH/CMCG) were prepared with carboxymethyl cashew gum with two different degrees of substitution (DS) and loaded with bovine serum albumin (BSA). In water, for microspheres formed using low molar mass chitosan (LCH) sample swelling was observed for both CMCG samples and CMCG sample with higher DS showed greater swelling. Using high molar mass chitosan (HCH) sample swelling was observed only for microsphere with high DS of CMCG (DS = 0.44). At pH 7.4, the HCH sample led to a lower degree of swelling. The diffusion coefficients D_v were higher for the higher DS of CMCG in both media and the HCH sample had a lower D_v than LCH one. Faster BSA release rates were observed for beads prepared with the higher DS, whereas those prepared with DS = 0.16 took twice the time to reach similar release profiles. All microsphere systems investigated had a non-Fickian BSA release mechanism.     

Synthesis and characterization of chitosan-based pH-sensitive semi-interpenetrating network microspheres for controlled release of diclofenac sodium

pH-Sensitive semi-interpenetrating networks (IPNs) based on chitosan (Cs) and acrylamide-grafted hydroxyethylcellulose (AAm-g-HEC) were prepared in the form of microspheres (MPs) by emulsion-crosslinking technique using glutaraldehyde (GA) as a crosslinker. Diclofenac sodium (DS) drug was successfully encapsulated into IPN microspheres by varying the ratio of Cs and AAm-g-HEC, % drug loading, and amount of GA. DS encapsulation of up to 83% was obtained as measured by UV spectroscopy. MPs with average particle sizes in the range of 188-310 μm were obtained. MPs were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Differential scanning calorimetry (DSC). Diffusion coefficients (D) of water transport through the microspheres were determined using an empirical equation. In vitro release of DS from these matrices has been investigated in pH 1.2 and 7.4 media.     

Formulation and evaluation of ketorolac tromethamine-loaded albumin microspheres for potential intramuscular administration

The objective of this work was to prepare and evaluate ketorolac tromethamine-loaded albumin microspheres using a factorial design. Albumin microspheres were prepared by emulsion cross-linking method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance (ANOVA) for entrapment efficiency indicated that entrapment efficiency is best fitted to a response surface linear model. From the statistical analysis it was observed that as the drug:polymer (D∶P) ratio and volume of glutaraldehyde increased, there was a significant increase in the encapsulation efficiency. Scanning electron microscopy of the microspheres revealed a spherical, nonporous and uniform appearance, with a smooth surface. Based on the entrapment efficiency and physical appearance, 9 formulations were selected for release study. The maximum particle size observed was below 40 μm. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microspheres, except those having less polymer proportion (D∶P ratio is 1∶1), exhibited a prolonged release for almost 24 hours. On comparingr ² values for Higuchi and Peppas kinetic models, different batches of microspheres showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D∶P ratio and amount of cross-linking agent. From the experimental data obtained with respect to particle size and extent of drug relaase, it could be concluded that the prepared microspheres are useful for once-a-day intramuscular administration of ketorolac tromethamine. Published: February 23, 2007