Effect of adhesive on the morphology and mechanical properties of electrospun fibrous mat of cellulose acetate

Ultrafine fibers of cellulose acetate/poly(butyl acrylate) (CA/PBA) composite in which PBA acted as an adhesive and CA acted as a matrix, were successfully prepared as fibrous mat via electrospinning. The morphology observation from the electrospun CA/PBA composite fibers, after treatment with heat hardener, revealed that the fibers were cylindrical and had point-bonded structures. SEM, FT-IR spectra, Raman spectra, TGA analysis, and mechanical properties measurement were used to study the different properties of hybrid mats. The tensile strength of blend fibrous electrospun mats was found to be effectively increased. This resultant enhancement of the mechanical properties of polymer fibrous mats, caused by generating the point-bonded structures (due to adhesive), could increase the number of potential applications of mechanically weak electrospun CA fibers.     

Comb polymers prepared by ATRP from hydroxypropyl cellulose

Hydroxypropyl cellulose (HPC) was used as a core molecule for controlled grafting of monomers by ATRP, the aim being to produce densely grafted comb polymers. HPC was either allowed to react with an ATRP initiator or the first generation initiator-functionalized 2,2-bis(methylol)propionic acid dendron to create macroinitiators having high degrees of functionality. The macroinitiators were then "grafted from" using ATRP of methyl methacrylate (MMA) or hexadecyl methacrylate. Block copolymers were obtained by chain extending PMMA-grafted HPCs via the ATRP of tert-butyl acrylate. Subsequent selective acidolysis of the tert-butyl ester moieties was performed to form a block of poly(acrylic acid) resulting in amphiphilic block copolymer grafts. The graft copolymers were characterized by 1H NMR and FT-IR spectroscopies, DSC, TGA, rheological measurements, DLS, and tapping mode AFM on samples spin coated upon mica. It was found that the comb (co)polymers were in the nanometer size range and that the dendronization had an interesting effect on the rheological properties.     

Evaluation of acrylate-based block copolymers prepared by atom transfer radical polymerization as matrices for paclitaxel delivery from coronary stents

Acrylate-based block copolymers, synthesized by atom transfer radical polymerization (ATRP) processes, were evaluated as drug delivery matrices for the controlled release of paclitaxel from coronary stents. The polymers were multiblock copolymers consisting of poly(butyl acrylate) or poly(lauryl acrylate) soft blocks and hard blocks composed of poly(methyl methacrylate), poly(isobornyl acrylate), or poly(styrene) homo- or copolymers. Depending on the ratio of hard to soft blocks in the copolymers, coating formulations were produced that possessed variable elastomeric properties, resulting in stent coatings that maintained their integrity when assessed by scanning electron microscopy (SEM) imaging of overexpanded stents. In vitro paclitaxel release kinetics from coronary stents coated with these copolymers typically showed an early burst followed by sustained release behavior, which permitted the elution of the majority of the paclitaxel over a 10-day time period. It was determined that neither the nature of the polyacrylate (n-butyl or lauryl) nor that of the hard block appeared to affect the release kinetics of paclitaxel at a loading of 25% drug by weight, whereas some effects were observed at lower drug loading levels. Differential scanning calorimetry (DSC) analysis indicated that the paclitaxel was at least partially miscible with the poly(n-butyl acrylate) phase of those block copolymers. The copolymers were also evaluated for sterilization stability by exposing both the copolymer alone and copolymer/paclitaxel coated stents to e-beam radiation at doses of 1-3 times the nominal dose used for medical device sterilization (25 kGy). It was found that the copolymers containing blocks bearing quaternary carbons within the polymer backbone were less stable to the radiation and showed a decrease in molecular weight as determined by gel-permeation chromatography. Conversely, those without quaternary carbons showed no significant change in molecular weight when exposed to 3 times the standard radiation dose. There was no significant change in drug release profile from any of the acrylate-based copolymers after exposure to 75 kGy of e-beam radiation, and this was attributed to the inherent radiation stability of the poly(n-butyl acrylate) center block.     

Glycine derived polymerizable cosurfactant in the synthesis of functionalized poly(butyl acrylate) nanolatexes

The approach of employing N-glycinylmaleamic acid (NGMA) as an efficient cosurfactant to provide microemulsion polymerization of butyl acrylate using a weight ratio of sodium dodecyl sulfate (SDS)/butyl acrylate (BA) at 相似文献   

The influence of grafted polymer architecture and fluid hydrodynamics on protein separation by entropic interaction chromatography

Entropic interaction chromatography (EIC) provides efficient size-based separation of protein mixtures through the entropy change associated with solute partitioning into a layer of hydrophilic homopolymer that has been end-grafted within the pores of a macroporous chromatography support. In this work, surface-initiated atom-transfer radical polymerization (ATRP) is used to prepare a library of EIC stationary phases covering a wide range of grafted-chain densities and molecular weights. Exhaustive chain cleavage and analysis by saponification and GPC-MALLS, respectively, show that the new ATRP synthesis procedure allows for excellent control over graft molecular weight and polydispersity. The method is used to prepare high-density grafts (up to 0.164 +/- 0.005 chains/nm(2)) that extend the range of EIC applications to include efficient buffer-exchange and desalting of protein preparations. Reducing the graft density allows for greater partitioning of high molecular weight solutes, extending the linear range of the selectivity curve. Increasing graft molecular weight also alters selectivity, but more directly affects column capacity by increasing the volume of the grafted layer. Protein partitioning in high-density EIC columns is found to decrease with mobile-phase velocity (u). Although solute mass transfer resistances leading to an increase in plate height can explain this effect, pressure drop data across the column are indicative of weak convective flow through at least a fraction of the grafted architecture. Modeling of the grafted brush properties in the presence of solvent flow by subjecting a self-consistent-field theory representation of the brush to a viscous shear force predicts that the grafted chains will tilt and elongate in the direction of flow. The shear force may therefore act to reduce the number of conformations available to chains, increasing their rigidity without significantly altering the thickness of the grafted layer. A reduction in protein partitioning is then predicted when the dependence on u of the solute entropy loss is stronger than that of the grafted polymer, a condition met at high graft densities.     

Designed chain architecture for enhanced migration resistance and property preservation in poly(vinyl chloride)/polyester blends

Blends of poly(vinyl chloride) (PVC) and poly(butylene adipate) (PBA) with varying degrees of branching were analyzed with respect to migration resistance during aging in water, preservation of material properties, and thermal stability. Gas chromatography-mass spectrometry, water absorption, weight loss, thermogravimetric analysis, Fourier transform infrared spectroscopy, contact angle, tensile testing, and differential scanning calorimetry were used to analyze the blends before and after aging in water for 6 weeks. Films plasticized with slightly branched polyester maintained their material and mechanical properties best during aging. High degree of branching was accompanied by poor miscibility, increased hydrophilicity, and polydispersity, and highly branched PBA was not favorable as a plasticizer. Strong intermolecular interactions reduced the water absorption and increased the migration resistance of the blends. Polymeric plasticizers with no, low, or moderate degree of branching improved the thermal stability of films compared to films plasticized with a traditional phthalate plasticizer. Proper design of plasticizer architecture led, thus, to improved migration resistance, long-term properties, and thermal stability in PVC/polyester blends.     

Stability and nonfouling properties of poly(poly(ethylene glycol) methacrylate) brushes under cell culture conditions

This paper investigates the stability and nonfouling properties of poly(poly(ethylene glycol) methacrylate) (PPEGMA) brushes prepared by surface-initiated atom transfer radical polymerization from SiO(x) substrates modified with a trimethoxysilane-based ATRP initiator. At high chain densities, PPEGMA brushes were found to detach rapidly from glass or silicon substrates. Detachment of the PPEGMA brushes could be monitored with contact angle measurements, which indicated a decrease in the receding water contact angle upon detachment. Detachment of the PPEGMA brushes also resulted in an increase in nonspecific protein adsorption. The stability, and as a consequence the long-term nonfouling properties, of the PPEGMA brushes could be improved by tailoring the brush density and, to a lesser extent, the molecular weight of the polymer chains. By appropriate decrease of the grafting density, the stability of the brushes in cell culture medium could be improved from less than 1 to more than 7 days, without compromising the nonfouling properties.     

Regulation of the Contribution of Integrin to Cell Attachment on Poly(2-Methoxyethyl Acrylate) (PMEA) Analogous Polymers for Attachment-Based Cell Enrichment

Cell enrichment is currently in high demand in medical engineering. We have reported that non-blood cells can attach to a blood-compatible poly(2-methoxyethyl acrylate) (PMEA) substrate through integrin-dependent and integrin-independent mechanisms because the PMEA substrate suppresses protein adsorption. Therefore, we assumed that PMEA analogous polymers can change the contribution of integrin to cell attachment through the regulation of protein adsorption. In the present study, we investigated protein adsorption, cell attachment profiles, and attachment mechanisms on PMEA analogous polymer substrates. Additionally, we demonstrated the possibility of attachment-based cell enrichment on PMEA analogous polymer substrates. HT-1080 and MDA-MB-231 cells started to attach to poly(butyl acrylate) (PBA) and poly(tetrahydrofurfuryl acrylate) (PTHFA), on which proteins could adsorb well, within 1 h. HepG2 cells started to attach after 1 h. HT-1080, MDA-MB-231, and HepG2 cells started to attach within 30 min to PMEA, poly(2-(2-methoxyethoxy) ethyl acrylate-co-butyl acrylate) (30:70 mol%, PMe2A) and poly(2-(2-methoxyethoxy) ethoxy ethyl acrylate-co-butyl acrylate) (30:70 mol%, PMe3A), which suppress protein adsorption. Moreover, the ratio of attached cells from a cell mixture can be changed on PMEA analogous polymers. These findings suggested that PMEA analogous polymers can be used for attachment-based cell enrichment.     

Silicone fouling-release coatings: effects of the molecular weight of poly(dimethylsiloxane) and tetraethyl orthosilicate on the magnitude of pseudobarnacle adhesion strength

A series of poly(dimethyl siloxane) (PDMS)/silica nanocomposites were synthesized utilizing a sol gel method. The samples were evaluated using pseudobarnacle adhesion and tensile strength tests. The effects of the molecular weight of the PDMS and the size and structure of the silica domains on biofouling release and the mechanical behavior of the PDMS/silica materials were investigated. Three different molecular weights (18,000, 49,000 and 79,000 g mol(-1)) of hydroxyl-terminated PDMS (HT-PDMS) were used to prepare the nanocomposites with three different weight ratios (1:1, 3:1 and 5:1) of HT-PDMS to tetraethyl orthosilicate (TEOS). TEOS served as a crosslinker to form PDMS networks and as a precursor to form silica domains. Two different variants of TEOS with regard to its degree of polymerization (n) (monomeric type: n ≈= 1 and oligomeric type: n ≈= 5) were used for in situ formation of silica particles via the sol-gel process. The mechanical properties of the composites were characterized using stress-strain isotherms. All the mechanical properties evaluated (Young's modulus, tensile strength, energy required for rupture, elongation at break) improved with increases in the molecular weight of the HT-PDMS and the silica content. The pseudobarnacle adhesion test was used to examine the fouling- release (FR) properties of coatings applied on aluminum plates. The rupture energy and tensile strength increased substantially when oligomeric TEOS was employed in the PDMS/silica composites. Scanning electron microscopy (SEM) was used to investigate the structure of the silica domains. It was found that the use of oligomeric TEOS in higher molecular weight PDMS samples with higher PDMS/TEOS weight ratios led to low pseudobarnacle adhesion strengths of ≈ 0.3 MPa, which is in the range of commercial FR coatings.     

Winding threads around plant cells: a geometrical model for microfibril deposition

In this paper, a geometrical model is put forward to account for the deposition orientation of plant cell wall microfibrils (CMFs). The model presupposes the insertion in the plasma membrane of CMF initiation complexes, which, once inserted, are moved through the fluid plane of the plasma membrane by the kinetic force of CMF synthesis, leaving CMFs in their wake. Deposition occurs in a limited space and the CMFs are linked to wall matrix molecules. CMF orientation is governed by the laws of geometry and, taking space-limiting conditions into account, therefore depends on (1) cell geometry, (2) the other wall molecules linked to the CMFs, and (3) the number of CMF initiation complexes inserted into the plasma membrane. The model does not exclude the idea that cortical microtubules may determine initial CMF orientation after cell division by determining the cell elongation direction.     

Cell wall water content has a direct effect on extensibility in growing hypocotyls of sunflower (Helianthus annuus L.)

It has been proposed that spacing between cellulose microfibrils within plant cell walls may be an important determinant of their mechanical properties. A consequence of this hypothesis is that the water content of cell walls may alter their extensibility and that low water potentials may directly reduce growth rates by reducing cell wall spacing. This paper describes a number of experiments in which the water potential of frozen and thawed growing hypocotyls of sunflower (Helianthus annuus L.) were altered using solutions of high molecular weight polyethylene glycol (PEG) or Dextran while their extension under constant stress was monitored using a creep extensiometer (frozen and thawed tissue was used to avoid confounding effects of turgor or active responses to the treatments). Clear reductions in extensibility were observed using both PEG and Dextran, with effects observed in hypocotyl segments treated with PEG 35 000 solutions with osmotic pressures of > or =0.21 MPa suggesting that the relatively mild stresses required to reduce water potentials of plants in vivo by 0.21 MPa may be sufficient to reduce growth rates via a direct effect on wall extensibility. It is noted, therefore, that the water binding capacity of plant cell walls may be of ecophysiological importance. Measurements of cell walls of sunflower hypocotyls using scanning electron microscopy confirmed that treatment of hypocotyls with PEG solutions reduced wall thickness, supporting the hypothesis that the spatial constraint of movement of cellulose microfibrils affects the mechanical properties of the cell wall.     

The mechanical function and structure of aortic microfibrils in the lobster Homarus americanus

Marfan syndrome, a connective tissue disorder affecting the cardiovascular system, is caused by mutations of fibrillin-based microfibrils. These mutations often affect the calcium-binding domains, resulting in structural changes to the proteins. It is hypothesized that these Ca+2 binding sites regulate the structure and mechanical properties of the microfibrils. The mechanical properties of fresh and extracted lobster aortic rings in calcium solutions (1, 13 and 30 mM Ca+2) were measured. Samples underwent amino acid compositional analysis. Antibodies were produced against the material comprising extracted aortic rings. The ultrastructure of strained and unstrained samples was examined using transmission electron microscopy. Calcium level altered the tangent modulus of fresh vessels. These rings were significantly stiffer when tested at 30 mM Ca+2 compared to rings tested at 1 mM Ca+2. Amino acid comparisons between extracted samples, porcine and human fibrillin showed compositional similarity. Immunohistochemical analysis showed that antibodies produced against the material in extracted samples localized to the known microfibrillar elements in the lobster aorta and cross-reacted with fibrillin microfibrils of mammalian ciliary zonules. Ultrastructurally, vessels incubated in low calcium solutions showed diffuse interbead regions while those incubated in physiological or high calcium solutions showed interbead regions with more defined lateral edges.     

Role of cortical microtubules in the orientation of cellulose microfibril deposition in higher-plant cells

Cortical microtubules (MTs) have been implicated in the morphogenesis of plant cells by regulating the orientation of newly deposited cellulose microfibrils (CMFs). However, the role of MTs in oriented CMF deposition is still unclear. We have investigated the mechanism of CMF deposition with cultured tobacco protoplasts derived from taxol-treated BY-2 cells (taxol protoplasts). The BY-2 protoplasts regenerated patches of beta-l,3-glucan (callose) and fibrils of beta-l,4-glucan (cellulose). Taxol protoplasts possessed the same ordered MT arrays as material cells and regenerated CMFs with patterns almost coincidental with MTs. Electron microscopy revealed that, on the surface of cultured taxol protoplasts, each CMF bundle appeared to be deposited on each cortical MT. These results suggest that MTs may attach directly to the cellulose-synthesizing complexes, by some form of linkage, and regulate the movement of these complexes in higher-plant cells.     

Phenylbutyric acid reduces amyloid plaques and rescues cognitive behavior in AD transgenic mice

Trafficking through the secretory pathway is known to regulate the maturation of the APP-cleaving secretases and APP proteolysis. The coupling of stress signaling and pathological deterioration of the brain in Alzheimer's disease (AD) supports a mechanistic connection between endoplasmic reticulum (ER) stress and neurodegeneration. Consequently, small molecular chaperones, which promote protein folding and minimize ER stress, might be effective in delaying or attenuating the deleterious progression of AD. We tested this hypothesis by treating APPswePS1delta9 AD transgenic mice with the molecular chaperone phenylbutyric acid (PBA) for 14 months at a dose of 1 mg PBA g(-1) of body weight in the drinking water. Phenylbutyric acid treatment increased secretase-mediated APP cleavage, but was not associated with any increase in amyloid biosynthesis. The PBA-treated AD transgenic mice had significantly decreased incidence and size of amyloid plaques throughout the cortex and hippocampus. There was no change in total amyloid levels suggesting that PBA modifies amyloid aggregation or pathogenesis independently of biogenesis. The decrease in amyloid plaques was paralleled by increased memory retention, as PBA treatment facilitated cognitive performance in a spatial memory task in both wild-type and AD transgenic mice. The molecular mechanism underlying the cognitive facilitation of PBA is not clear; however, increased levels of both metabotropic and ionotropic glutamate receptors, as well as ADAM10 and TACE, were observed in the cortex and hippocampus of PBA-treated mice. The data suggest that PBA ameliorates the cognitive and pathological features of AD and supports the investigation of PBA as a therapeutic for AD.     

Homotypic Versican G1 Domain Interactions Enhance Hyaluronan Incorporation into Fibrillin Microfibrils

Versican G1 domain-containing fragments (VG1Fs) have been identified in extracts from the dermis in which hyaluronan (HA)-versican-fibrillin complexes are found. However, the molecular assembly of VG1Fs in the HA-versican-microfibril macrocomplex has not yet been elucidated. Here, we clarify the role of VG1Fs in the extracellular macrocomplex, specifically in mediating the recruitment of HA to microfibrils. Sequential extraction studies suggested that the VG1Fs were not associated with dermal elements through HA binding properties alone. Overlay analyses of dermal tissue sections using the recombinant versican G1 domain, rVN, showed that rVN deposited onto the elastic fiber network. In solid-phase binding assays, rVN bound to isolated nondegraded microfibrils. rVN specifically bound to authentic versican core protein produced by dermal fibroblasts. Furthermore, rVN bound to VG1Fs extracted from the dermis and to nondenatured versican but not to fibrillin-1. Homotypic binding of rVN was also seen. Consistent with these binding properties, macroaggregates containing VG1Fs were detected in high molecular weight fractions of sieved dermal extracts and visualized by electron microscopy, which revealed localization to microfibrils at the microscopic level. Importantly, exogenous rVN enhanced HA recruitment both to isolated microfibrils and to microfibrils in tissue sections in a dose-dependent manner. From these data, we propose that cleaved VG1Fs can be recaptured by microfibrils through VG1F homotypical interactions to enhance HA recruitment to microfibrils.     

Intermolecular interaction and morphology investigation of drug loaded ABA-triblock copolymers with different hydrophilic/lipophilic ratios

Copolymers with different hydrophilic/lipophilic ratios (HLR) were used to optimize the compatibility between polymer as drug carrier and quercetin as lipophilic drug. Synthesis of amphiphilic triblock copolymers (TC) of poly(butylene adipate)–poly(ethylene glycol)–poly(butylene adipate) (PBA–PEG–PBA) with different PBA molecular weights is the first approach for this purpose. Polymerization and structural features of the polymers were analyzed by different characterization techniques (GPC, ¹H NMR and FT-IR). Formation of hydrophobic and hydrophilic domains with different ratios in the ABA-triblock copolymers was studied by ¹H NMR. The sunflower-like nanoparticles were prepared by self-assembling of the amphiphilic copolymers in the aqueous solution. The hydrophobic PBA segments formed the central solid-like core which stabilized by the hydrophilic PEG rings. The optimum HLR for these copolymers was determined on the basis of drug release time and profile, obtained from freeze-dried nanoparticle powders. The results indicated that optimum HLR for the sustained quercetin release obtained at higher molecular weight of polyesteric domains. Zeta potential measurements showed that the nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, TEM pictures showed that the nanocarriers morphologies were changed by changing HLR of triblock copolymers. The PBA–PEG–PBA nanoparticles also showed good drug loading properties, suggesting that they were very suitable as delivery devices for hydrophobic drugs.     

Nanomechanical properties of mineralised collagen microfibrils based on finite elements method: biomechanical role of cross-links

Hierarchical structures in bio-composites such as bone tissue have many scales or levels and synergic interactions between the different levels. They also have a highly complex architecture in order to fulfil their biological and mechanical functions. In this study, a new three-dimensional (3D) model based on the finite elements (FEs) method was used to model the relationship between the hierarchical structure and the properties of the constituents at the sub-structure scale (mineralised collagen microfibrils) and to investigate their apparent nanomechanical properties. The results of the proposed FE simulations show that the elastic properties of microfibrils depend on different factors such as the number of cross-links, the mechanical properties and the volume fraction of phases. The results obtained under compression loading at a small deformation < 2% show that the microfibrils have a Young's modulus (E_f) ranging from 0.4 to 1.16 GPa and a Poisson's ratio ranging from 0.26 to 0.3. These results are in excellent agreement with experimental data (X-ray, AFM and MEMS) and molecular simulations.     

Isolation and partial characterization of the heterophile antigen of infectious mononucleosis from bovine erythrocytes

The heterophile antigen (Paul-Bunnell antigen, PBA) of infectious mononucleosis was isolated by extraction of an aqueous suspension of bovine erythrocyte stromata with chloroform-methanol (2:1). The upper aqueous layer contained gangliosides, PBA, and a high-molecular-weight glycoprotein. PBA and gangliosides were separated from the high-molecular-weight glycoprotein by extraction of lyophilized upper layer with chloroform-methanol solvents. Separation of PBA from gangliosides was carried out by chromatography on DEAE-cellulose with chloroform-methanol solvents. PBA appeared to be a minor glycoprotein component of the erythrocyte membrane and had both hydrophobic and hydrophilic properties. It was soluble in either organic or aqueous solvents. On SDS-polyacrylamide gel electrophoresis, it migrated as a single component that stained for protein with Coomassie blue, for carbohydrate with periodic acid-Schiff reagent, and for lipid with oil red 0; it had an apparent molecular weight of 26,000. It was composed of 62% protein with major amino acids: glutamic acid, proline, glycine, isoleucine, leucine, and threonine (158, 116, 98, 90, 85, and 82 residues per 1,000 residues, respectively). Carbohydrate content was 9.2% with major sugar constituents: sialic acid, galactosamine, and galactose. Serologic activity of PBA was destroyed by pronase but not by trypsin.     

Raman microscopy and X-ray diffraction,a combined study of fibrillin-rich microfibrillar elasticity

Fibrillin-rich microfibrils are essential elastic structures contained within the extracellular matrix of a wide variety of connective tissues. Microfibrils are characterized as beaded filamentous structures with a variable axial periodicity (average 56 nm in the untensioned state); however, the basis of their elasticity remains unknown. This study used a combination of small angle x-ray scattering and Raman microscopy to investigate further the packing of microfibrils within the intact tissue and to determine the role of molecular reorganization in the elasticity of these microfibrils. The application of relatively small strains produced no overall change in either molecular or macromolecular microfibrillar structure. In contrast, the application of larger tissue extensions (up to 150%) resulted in a markedly different structure, as observed by both Raman microscopy and small angle x-ray scattering. These changes occurred at different levels of architecture and are interpreted as ranging from alterations in peptide bond conformation to domain rearrangement. This study demonstrates the importance of molecular elasticity in the mechanical properties of fibrillin-rich microfibrils in the intact tissue.     

Role of cortical microtubules in the orientation of cellulose microfibril deposition in higher-plant cells

Summary Cortical microtubules (MTs) have been implicated in the morphogenesis of plant cells by regulating the orientation of newly deposited cellulose microfibrils (CMFs). However, the role of MTs in oriented CMF deposition is still unclear. We have investigated the mechanism of CMF deposition with cultured tobacco protoplasts derived from taxol-treated BY-2 cells (taxol protoplasts). The BY-2 protoplasts regenerated patches of β-l,3-glucan (callose) and fibrils of β-l,4-glucan (cellulose). Taxol protoplasts possessed the same ordered MT arrays as material cells and regenerated CMFs with patterns almost coincidental with MTs. Electron microscopy revealed that, on the surface of cultured taxol protoplasts, each CMF bundle appeared to be deposited on each cortical MT. These results suggest that MTs may attach directly to the cellulose-synthesizing complexes, by some form of linkage, and regulate the movement of these complexes in higher-plant cells.