Two Classes of Tn10 Transposase Mutants That Suppress Mutations in the Tn10 Terminal Inverted Repeat

Tn10 transposition requires IS10 transposase and essential sequences at the two ends of the element. Mutations in terminal basepairs 6-13 confer particularly strong transposition defects. We describe here the identification of transposase mutations that suppress the transposition defects of such terminus mutations. These mutations are named ``SEM'''' for suppression of ends mutations. All of the SEM mutations suppress more than a single terminus mutation and thus are not simple alterations of transposase/end recognition specificity. The mutations identified fall into two classes on the basis of genetic tests, location within the protein and nature of the amino acid substitution. Class I mutations, which are somewhat allele specific, appear to define a small structural and functional domain of transposase in which hydrophobic interactions are important at an intermediate stage of the transposition reaction, after an effective interaction between the ends but before transposon excision. Class II mutations, which are more general in their effects, occur at a single residue in a small noncritical amino-terminal proteolytic domain of transposase and exert their affects by altering a charge interaction; these mutations may affect act early in the reaction, before or during establishment of an effective interaction between the ends.     

Factors responsible for target site selection in Tn10 transposition: a role for the DDE motif in target DNA capture.

Tn10, like several other transposons, exhibits a marked preference for integration into particular target sequences. Such sequences are referred to as integration hotspots and have been used to define a consensus target site in Tn10 transposition. We demonstrate that a Tn10 hotspot called HisG1, which was identified originally in vivo, also functions as an integration hotspot in vitro in a reaction where the HisG1 sequence is present on a short DNA oligomer. We use this in vitro system to define factors which are important for the capture of the HisG1 target site. We demonstrate that although divalent metal ions are not essential for HisG1 target capture, they greatly facilitate capture of a mutated HisG1 site. Analysis of catalytic transposase mutants further demonstrates that the DDE motif plays a critical role in ''divalent metal ion-dependent'' target capture. Analysis of two other classes of transposase mutants, Exc+ Int- (which carry out transposon excision but not integration) and ATS (altered target specificity), demonstrates that while a particular ATS transposase binds HisG1 mutants better than wild-type transposase, Exc+ Int- mutants are defective in HisG1 capture, further defining the properties of these classes of mutants. Possible mechanisms for the above observations are considered.     

Linearity versus Nonlinearity of Offspring-Parent Regression: An Experimental Study of Drosophila Melanogaster

IS10 transposase mediates excision and integration reactions in Tn10/IS10 transposition. Mutations in IS10 transposase that specifically block integration have previously been identified; however, the mechanism by which these mutations block integration has not been established. One approach to defining the basis of this block is to identify ways in which the original defect can be corrected. The approach we have taken toward this end has been to isolate and characterize intragenic second site suppressors to two different integration-defective mutants. Of the second site suppressors identified, one, CY134, is of particular interest for two reasons. First, it suppresses at least seven different mutations that confer an integration-defective phenotype. Interestingly, these mutations map in two separate segments of transposase, designated patch I and patch II. Second, CY134 on its own has previously been shown to relax the target DNA sequence requirements for Tn10 integration. We provide evidence that suppression by CY134 is not simply a consequence of this mutation conferring a general ``transposition up' phenotype, but rather is due to correcting the original defect. Possible mechanisms of suppression for both CY134 and other second site suppressors are considered.     

Functional analysis of unique class II insertion sequence IS1071

Various xenobiotic-degrading genes on many catabolic plasmids are often flanked by two copies of an insertion sequence, IS1071. This 3.2-kb IS element has long (110-bp) terminal inverted repeats (IRs) and a transposase gene that are phylogenetically related to those of the class II transposons. However, the transposition mechanism of IS1071 has remained unclear. Our study revealed that IS1071 was only able to transpose at high frequencies in two environmental beta-proteobacterial strains, Comamonas testosteroni and Delftia acidovorans, and not in any of the bacteria examined which belong to the alpha- and gamma-proteobacteria. IS1071 was found to have the functional features of the class II transposons in that (i) the final product of the IS1071 transposition was a cointegrate of its donor and target DNA molecules connected by two directly repeated copies of IS1071, one at each junction; (ii) a 5-bp duplication of the target sequence was observed at the insertion site; and (iii) a tnpA mutation of IS1071 was efficiently complemented by supplying the wild-type tnpA gene in trans. Deletion analysis of the IS1071 IR sequences indicated that nearly the entire region of the IRs was required for its transposition, suggesting that the interaction between the transposase and IRs of IS1071 might be different from that of the other well-characterized class II transposons.     

All three residues of the Tn 10 transposase DDE catalytic triad function in divalent metal ion binding.

Tn 10/IS 10 transposition involves excision of the transposon from a donor site and subsequent joining of the excised transposon to a new target site. These steps are catalyzed by the Tn 10 -encoded transposase protein and require the presence of a suitable divalent metal ion. Like other transposase and retroviral integrase proteins, Tn 10 transposase appears to contain a single active site which includes a triad of acidic amino acid residues generally referred to as the DDE motif. In addition to its role in catalysis, the Tn 10 transposase DDE motif also functions in target capture, a step that in vitro is greatly facilitated by the presence of a suitable divalent metal ion. We show that cysteine residue substitutions at each of the DDE motif residues in Tn 10 transposase result in a change in the divalent metal ion requirements for catalysis, such that Mn2+but not Mg2+can be used. This switch in metal ion specificity provides evidence that each of the DDE motif residues functions directly in metal ion binding. We also show differential effects of DDE mutations on metal ion-assisted target capture. A number of models, including a two metal ion active site, are considered to explain these effects.     

Transposition of cyanobacterium insertion element ISY100 in Escherichia coli

The genome of the cyanobacterium Synechocystis sp. strain PCC6803 has nine kinds of insertion sequence (IS) elements, of which ISY100 in 22 copies is the most abundant. A typical ISY100 member is 947 bp long and has imperfect terminal inverted repeat sequences. It has an open reading frame encoding a 282-amino-acid protein that appears to have partial homology with the transposase encoded by a bacterial IS, IS630, indicating that ISY100 belongs to the IS630 family. To determine whether ISY100 has transposition ability, we constructed a plasmid carrying the IPTG (isopropyl-beta-D-thiogalactopyranoside)-inducible transposase gene at one site and mini-ISY100 with the chloramphenicol resistance gene, substituted for the transposase gene of ISY100, at another site and introduced the plasmid into an Escherichia coli strain already harboring a target plasmid. Mini-ISY100 transposed to the target plasmid in the presence of IPTG at a very high frequency. Mini-ISY100 was inserted into the TA sequence and duplicated it upon transposition, as do IS630 family elements. Moreover, the mini-ISY100-carrying plasmid produced linear molecules of mini-ISY100 with the exact 3' ends of ISY100 and 5' ends lacking two nucleotides of the ISY100 sequence. No bacterial insertion elements have been shown to generate such molecules, whereas the eukaryotic Tc1/mariner family elements, Tc1 and Tc3, which transpose to the TA sequence, have. These findings suggest that ISY100 transposes to a new site through the formation of linear molecules, such as Tc1 and Tc3, by excision. Some Tc1/mariner family elements leave a footprint with an extra sequence at the site of excision. No footprints, however, were detected in the case of ISY100, suggesting that eukaryotes have a system that repairs a double strand break at the site of excision by an end-joining reaction, in which the gap is filled with a sequence of several base pairs, whereas prokaryotes do not have such a system. ISY100 transposes in E. coli, indicating that it transposes without any host factor other than the transposase encoded by itself. Therefore, it may be able to transpose in other biological systems.     

DNA sequence of IS91 and identification of the transposase gene.

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.     

Determinants for hairpin formation in Tn10 transposition

Tn10 transposition involves the formation of a hairpin intermediate at the transposon termini. Here we show that hairpin formation exhibits more stringent DNA sequence requirements at the terminal two base pairs than either transpososome assembly or first strand nicking. We also observe a significant DNA distortion at the terminal base pairs upon transpososome assembly by chemical nuclease footprinting. Interestingly, mutations at these positions do not necessarily inhibit the formation of the distortion. However, it remains a possibility that the inhibitory effect of these mutations is due to a defect in protein-DNA interactions subsequent to this deformation. Terminal base pair mutations also inhibited strand transfer, providing evidence that transposase interactions with the terminal residues on both 'transferred' and 'non-transferred' strands are important for hairpin formation. We also demonstrate that mutation of a highly conserved tyrosine residue that is a component of the YREK motif, Y285, results in a phenotype comparable to that of the terminal base pair mutations. In contrast, a mutation at another conserved position, W265, is shown to relax the specificity of the hairpin formation reaction.     

Characterization of IS476 and its role in bacterial spot disease of tomato and pepper.

IS476 is an endogenous insertion sequence present in copper-tolerant strains of Xanthomonas campestris pv. vesicatoria. Sequence analysis has revealed that the element is 1,225 base pairs in length, has 26-base-pair inverted repeats, and causes a 4-base-pair target site duplication upon insertion into the avirulence gene avrBs1. Comparison of the full-length sequence with sequences in the National Biomedical Research Foundation and National Institutes of Health data bases showed that one of the predicted IS476 proteins is partially homologous to the putative transposase of IS3 from Escherichia coli, and the inverted repeats of IS476 have significant homology to the inverted repeats of the IS51 insertion sequence of Pseudomonas syringae pv. savastanoi. A transposition assay based on the insertional inactivation of the sacRB locus of Bacillus subtilis was used to demonstrate that one of the three copies of IS476 residing on the 200-kilobase copper plasmid pXVCU1 is capable of transposition in several strains of Xanthomonas campestris. The position of IS476 insertion in several avrBs1 mutants was established and was shown to influence both induction of hypersensitivity and bacterial growth in planta.     

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS 30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS 30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS 30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS 30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS 30 -like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS 3 , IS 6 and IS 21 , too.     

Palindromic unit-independent transposition of IS1397 in Yersinia pestis

Palindromic units (PUs) are intergenic repeated sequences scattered over the chromosomes of Escherichia coli and several other enterobacteria. In the latter, IS1397, an E. coli insertion sequence specific to PUs, transposes into PUs with sequences close to the E. coli consensus. Reasons for this insertion specificity can relate to either a direct recognition of the target (by its sequence or its structure) by the transposase or an interaction between a specific host protein and the PU target DNA sequence. In this study, we show that for Yersinia pestis, a species deprived of PUs, IS1397 can transpose onto its chromosome, with transpositional hot spots. Our results are in favor of a direct recognition of target DNA by IS1397 transposase.     

Isolation of a new insertion sequence, IS13655, and its application to Corynebacterium glutamicum genome mutagenesis

A new functional Corynebacterium glutamicum insertion sequence (IS) element, IS13655, was isolated using a suicide vector. The IS element was 1,293 bp in size and contained 26-bp imperfect inverted repeats (IRs) and 3-bp target site duplication as direct repeats (DRs). IS13655 harbored two ORFs with high similarity to the transposase of IS1206, an IS3 family element. IS13655 revealed relatively high transposition efficiency, with low target site selectivity along the Corynebacterium glutamicum R genome, making it a potentially useful genetic engineering tool.     

MuA transposase separates DNA sequence recognition from catalysis

Confronted with thousands of potential DNA substrates, a site-specific enzyme must restrict itself to the correct DNA sequence. The MuA transposase protein performs site-specific DNA cleavage and joining reactions, resulting in DNA transposition-a specialized form of genetic recombination. To determine how sequence information is used to restrict transposition to the proper DNA sites, we performed kinetic analyses of transposition with DNA substrates containing either wild-type transposon sequences or sequences carrying mutations in specific DNA recognition modules. As expected, mutations near the DNA cleavage site reduce the rate of cleavage; the observed effect is about 10-fold. In contrast, mutations within the MuA recognition sequences do not directly affect the DNA cleavage or joining steps of transposition. It is well established that the recognition sequences are necessary for assembly of stable, multimeric MuA-DNA complexes, and we find that recognition site mutations severely reduce both the extent and the rate of this assembly process. Yet if the MuA-DNA complexes are preassembled, the first-order rate constants for both DNA cleavage and DNA strand transfer (the joining reaction) are unaffected by the mutations. Furthermore, most of the mutant DNA molecules that are cleaved also complete DNA strand transfer. We conclude that the sequence-specific contacts within the recognition sites contribute energetically to complex assembly, but not directly to catalysis. These results contrast with studies of more orthodox enzymes, such as EcoRI and some other type II restriction enzymes. We propose that the strategy employed by MuA may serve as an example for how recombinases and modular restriction enzymes solve the DNA specificity problem, in that they, too, may separate substrate recognition from catalysis.     

Tn3 transposition immunity is conferred by the transposase-binding domain in the terminal inverted-repeat sequence of Tn3

A series of mutant terminal inverted repeats (IRs), having 2 bp substitutions at various sites within the 38-bp IR sequence of the ampicillin-resistance transposon Tn3, were tested for transposition immunity to Tn3. Mutations within region 1-10 in the IR did not affect transposition immunity, while mutations within region 13-38 inactivated the immunity function. These two regions corresponded to domain A which was not bound specifically by Tn3 transposase and to domain B which was bound by the transposase, respectively. This indicates that specific binding of transposase to domain B within the IR sequence is responsible for transposition immunity.     

Mutations in the scaffoldin gene, cipA, of Clostridium thermocellum with impaired cellulosome formation and cellulose hydrolysis: insertions of a new transposable element, IS1447, and implications for cellulase synergism on crystalline cellulose

Mutants of Clostridium thermocellum that had lost the ability to adhere to microcrystalline cellulose were isolated. Six of them that showed diminished ability to depolymerize crystalline cellulose were selected. Size exclusion chromatography of the proteins from the culture supernatant revealed the loss of the supramolecular enzyme complex, the cellulosome. However, denaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis resulted in extracellular protein patterns comparable to those of isolated cellulosomes, except for a missing CipA band. Sequencing of the six mutant cipA genes revealed a new insertion (IS) element, IS1447, belonging to the IS3 family. It was inserted into the cipA reading frame in four different locations: cohesin module 1, two different positions in the carbohydrate binding module, and cohesin module 3. The IS sequences were identical and consisted of a transposase gene and the inverted repeats IRR and IRS. The insertion resulted in an obviously nonspecific duplication of 3 base pairs within the target sequence. This lack of specificity allows transposition without the need of a defined target DNA sequence. Eighteen copies of IS1447 were identified in the genomic sequence of C. thermocellum ATCC 27405. At least one of them can be activated for transposition. Compared to the wild type, the mutant culture supernatant, with a completely defective CipA protein, showed equal specific hydrolytic activity against soluble beta-glucan but a 15-fold reduction in specific activity with crystalline cellulose. These results identify a genetic basis for the synergistic effect of complex formation on crystalline-cellulose degradation.     

Intramolecular transposition of insertion sequence IS91 results in second-site simple insertions

A series of plasmids carrying an IRL-kan-IRR transposable cassette, in which IRL and IRR are the left- and right-terminal sequences of IS91, have been constructed. These cassettes could be complemented for transposition with similar efficiency when IS91 transposase was provided either in cis or in trans. A total of 87% of IS91 transposition products were simple insertions of the element, while the remaining 13% were plasmid fusions and co-integrates. When transposase expression was induced from an upstream lac promoter, transposition frequency increased approximately 100-fold. An open reading frame (ORF) present upstream of the transposase gene, ORF121, could be involved in target selection, as mutations affecting this ORF were altered in their insertion specificity. Intramolecular rearrangements were analysed by looking at transposition events disrupting a chloramphenicol resistance gene (cat ) located outside the transposable cassette. Plasmid instability resulting from insertion of an extra copy of IRL-kan-IRR within the cat gene was observed; transposition products contained a second copy of the cassette inserted either as a direct or as an inverted repeat. No deletion or inversion of the intervening DNA was observed. These results could be explained as a consequence of intramolecular transposition of IS91 according to a model of rolling-circle transposition.     

DNA recognition and the precleavage state during single-stranded DNA transposition in D. radiodurans

Bacterial insertion sequences (ISs) from the IS200/IS605 family encode the smallest known DNA transposases and mobilize through single-stranded DNA transposition. Transposition by one particular family member, ISDra2 from Deinococcus radiodurans, is dramatically stimulated upon massive γ irradiation. We have determined the crystal structures of four ISDra2 transposase/IS end complexes; combined with in vivo activity assays and fluorescence anisotropy binding measurements, these have revealed the molecular basis of strand discrimination and transposase action. The structures also show that previously established structural rules of target site recognition that allow different specific sequences to be targeted are only partially conserved among family members. Furthermore, we have captured a fully assembled active site including the scissile phosphate bound by a divalent metal ion cofactor (Cd2(+)) that supports DNA cleavage. Finally, the observed active site rearrangements when the transposase binds a metal ion in which it is inactive provide a clear rationale for metal ion specificity.