Construction of a recombinant plasmid composed of B. subtilis leucine genes and a B. subtilis (natto) plasmid: its use as cloning vehicle in B. subtilis 168.

Summary Recombinant plasmids composed of Bacillus subtilis 168 leucine genes and a B. subtilis (natto) plasmid have been constructed in a recombination deficient (recE4) mutant of Bacillus subtilis 168. The process involved EcoRI fragmentation and ligation of a B. subtilis (natto) plasmid and a composite plasmid RSF2124-B · leu in which B. subtilis 168 leucine genes are linked to the R-factor RSF2124. A constructed plasmid (pLS102) was found to be composed of an EcoRI fragment derived from the vector plasmid and two tandemly repeated EcoRI fragments carrying the leucine genes. A derivative plasmid (pLS101 or pLS103) consisting of one molecule each of the EcoRI fragments was obtained by in vivo intramolecular recombination between the repeated leucine gene fragments in pLS102. pLS103 was cleaved once with BamNI, SmaI and HpaI. Insertion of foreign DNA (Escherichia coli plasmid pBR322) into the BamNI site inactivated leuA but not the leuC function which thus can serve as selective marker if the plasmid is used as vector in molecular cloning. The penicillin resistance carried in pBR322 was not functionally expressed in B. subtilis cells. By partial digestion of pLS103 with HindIII followed by ligation with T4-induced ligase, pLS107 was obtained which contained only one EcoRI site. However, insertion of exogenous DNA (pBR322) into this EcoRI site inactivated both leuA and leuC functions.     

DNase-resistant transfer of chromosomal cat and tet insertions by filter mating in Pneumococcus

Genes for chloramphenicol resistance (Cm^r) and tetracycline resistance (Tc^r), which are present as heterologous insertions in the chromosomes of some clinical isolates of Streptococcus pneumoniae (pneumococcus) and derivative strains, were transferred at a low frequency to other pneumococci by a DNase-resistant filter mating process that resembles conjugation. Cotransfer of Cm^r and Tc^r was the most common event. Tetracycline resistance was transferred alone from one Tc^r strain or rarely from Cm^rTc^r donors, whereas Cm^r was never transferred alone. Neither the donor strains nor the transconjugants contained detectable plasmids. Transconjugants acted as donors for transformation and for filter mating and had properties similar to those of the parent strain. The presence of the conjugative plasmid pIP501 in the donor did not appear to influence the transfer properties of the Cm^r or Tc^r determinants. No transfer of Cm^r or Tc^r toStreptococcus faecalis JH2-2 was observed.     

Plasmid cloning vectors replicating in Escherichia coli,amino acid-producing coryneform bacteria and Methylobacillus sp.

Summary Four hybrid plasmids were constructed from the cryptic plasmid pAM330 (from Brevibacterium lactofermentum; 4.5 kb) and the broadhost-range plasmid pGV1106 (9.0 kb; Km^r Sm^r) isolated from Escherichia coli. All of them were mobilized from E. coli into the Gram-negative methylotrophic bacterium Methylobacillus sp. and two of these constructs (pCEM300 and pCEM400) were transferred by transformation into B. flavum and Corynebacterium glutamicum. Their kanamycin-resistance determinant coming from Gram-negative hosts was expressed in these Gram-positive bacteria. Both pCEM300 and pCEM400 are very stably maintained in B. flavum and represent suitable vectors for gene cloning in coryneform producers of amino acids.     

Lack of expression of RP4-specified β-lactamase in Azospirillum brasilense

Plasmid RP4, which normally confers resistance to ampicillin (Ap^r), tetracycline (Tc^r), and kanamycin (Km^r) to its hosts, failed to express enhanced Ap^r when transferred from Escherichia coli to Azospirillum brasilense which has its own intrinsic β-lactamase. Even in a β-lactamase-deficient mutant, A. brasilense RG-D16, no increase in β-lactamase or significant Ap^r appeared following transfer of RP4. However, A. brasilense RG (RP4) and A. brasilense RG-D16 (RP4) did exhibit Tc^r Km^r. When RP4 was transferred back from A. brasilense to E. coli all three drug resistances and β-lactamase activity were fully expressed.     

Physical structure and genetic expression of the sulfonamide-resistance plasmid pLS80 and its derivatives in Streptococcus pneumoniae and Bacillus subtilis

Summary The 10-kb chromosomal fragment of Streptococus pneumoniae cloned in pLS80 contains the sul-d allele of the pneumococcal gene for dihydropteroate synthase. As a single copy in the chromosome this allele confers resistance to sulfanilamide at 0.2 mg/ml; in the multicopy plasmid it confers resistance to 2.0 mg/ml. The sul-d mutation was mapped by restriction analysis to a 0.4-kb region. By the mechanism of chromosomal facilitation, in which the chromosome restores information to an entering plasmid fragment, a BamHI fragment missing the sul-d region of pLS80 established the full-sized plasmid, but with the sul-s allele of the recipient chromosome.A spontaneous deletion beginning 1.5 kb to the right of the sul-d mutation prevented gene function, possibly by removing a promoter. This region could be restored by chromosomal facilitation and be demonstrated in the plasmid by selection for sulfonamide resistance. Under selection for a vector marker, tetracycline resistance, only the deleted plasmid was detectable, apparently as a result of plasmid segregation and the advantageous growth rates of cells with smaller plasmids. When such cells were selected for sulfonamide resistance, the deleted region returned to the plasmid, presumably by equilibration between the chromosome and the plasmid pool, to give a low frequency (10^-3) of cells resistant to sulfanilamide at 2.0 mg/ml. Models for the mechanisms of chromosomal facilitation and equilibration are proposed.Several derivatives of pLS80 could be transferred to Bacillus subtilis, where they conferred resistance to sulfanil-amide at 2 mg/ml, thereby demonstrating cross-species expression of the pneumococcal gene. Transfer of the plasmids to B. subtilis gave rise to large deletions to the left of the sul-d marker, but these deletions did not interfere with the sul-d gene function. Restriction maps of pLS80 and its variously deleted derivatives are presented.     

Construction of a colony bank of E. coli containing hybrid plasmids representative of the Bacillus subtilis 168 genome. Expression of functions harbored by the recombinant plasmids in B. subtilis.

Summary A collection of about 2500 clones containing hybrid plasmids representative of nearly the entire genome of B. subtilis 168 was established in E. coli SK1592 by using the poly(dA)·poly(dT) joining method with randomly sheared DNA fragments and plasmid pHV33, a bifunctional vector which can replicate in both E. coli and B. subtilis. Detection of cloned recombinant DNA molecules was based on the insertional inactivation of the Tc gene occurring at the unique BamHI cleavage site present in the vector plasmid.Thirty individual clones of the collection were shown to hybridize specifically with a B. subtilis rRNA probe. CCC-recombinant plasmids extracted from E. coli were pooled in lots of 100 and used to transform auxotrophic mutants of B. subtilis 168. Complementation of these auxotrophic mutations was observed for several markers such as thr, leuA, hisA, glyB and purB. In several cases, markers carried by the recombinant plasmids were lost from the plasmid and integrated into the chromosomal DNA. Loss of genetic markers from the hybrid plasmids did not occur when a rec ^- recipient strain of B. subtilis was used.Abbreviations Ap^R resistance to ampicillin - Tc^R resistance to tetracycline - Cm^R resistance to chloramphenicol - CCC covalently closed circular duplex - Mdal magadalton     

Map of plasmid RP4 derived by insertion of transposon C.

We have determined the location of 36 sites on plasmid RP4 into which transposon C (an 8.5 × 10⁶ molecular weight DNA sequence conferring trimethoprim and streptomycin resistance) had spontaneously inserted itself. These were located by sucrose gradient analysis of EcoRI-generated and then, separately, the HindIII-generated DNA fragments from each RP4-TnC² plasmid. RP4 has a single EcoRI-susceptible site and, suitably displaced from this, a HindIII-susceptible site, whereas TnC has, respectively, one and two sites for these two enzymes. Thus the sizes of the restriction fragments depend on the location and orientation of the inserted TnC.Some of the RP4-TnC clones had lost one of the RP4 characters: transferability (Tra), tetracycline (Tc) or kanamycin (Km) resistances, but no ampicillin (Ap) sensitive clones were detected. Insertions giving each of these phenotypic changes cluster together at positions on the circular RP4 map that presumably locate the genes responsible for the Tra⁺, Km^r and Tc^r phenotypes. The Tra^? plasmids were grouped into four classes on the basis of their conferred phage sensitivities and plasmid copy numbers. The gene giving Ap^r was located by its known proximity to a BamHI-susceptible site. All the plasmids analysed had TnC inserted with one particular orientation. TnC insertions giving no detectable phenotypic change were not randomly placed around RP4, but clustered into certain regions. Two large regions, one containing TnA, had no TnC insertions. Ligation experiments with restriction fragments from various RP4-TnC plasmids led to the conclusion that both these regions contain genes essential to the replication and maintenance of RP4. The location of the HindIII site of RP4 within the gene giving Km^r should prove valuable to the use of this plasmid as a cloning vehicle.     

Recombinant plasmids capable to replication in B. subtilis and E. coli.

Summary The plasmid pBC16 (4.25 kbases), originally isolated from Bacillus cereus, determines tetracycline resistance and can be transformed into competent cells of B. subtilis. A miniplasmid of pBC16 (pBC16-1), 2,7 kb) which has lost an EcoRI fragment of pBC16 retains the replication functions and the tetracycline resistance. This plasmid which carries only one EcoRI site has been joined in vitro to pBS1, a cryptic plasmid previously isolated from B. subtilis and shown to carry also a single EcoRI site (Bernhard et al., 1978). The recombinant plasmid is unstable and dissociates into the plasmid pBS161 (8.2 kb) and the smaller plasmid pBS162 (2.1 kb). Plasmid pBS161 retains the tetracycline resistance. It possesses a single EcoRI site and 6 HindIII sites. The largest HindIII fragment of pBS161 carries the tetracycline resistance gene and the replication function. After circularization in vitro of this fragment a new plasmid, pBS161-1 is generated, which can be used as a HindIII and EcoRI cloning vector in Bacillus subtilis.Hybrid plasmids consisting of the E. coli plasmids pBR322, pWL7 or pAC184 and different HindIII fragments of pBS161 were constructed in vitro. Hybrids containing together with the E. coli plasmid the largest HindIII fragment of pBS161 can replicate in E. coli and B. subtilis. In E. coli only the replicon of the E. coli plasmid part is functioning whereas in B. subtilis replication of the hybrid plasmid is under the control of the Bacillus replicon. The tetracycline resistance of the B. subtilis plasmid is expressed in E. coli, but several antibiotic resistances of the E. coli plasmids (ampicillin, kanamycin and chloramphenicol) are not expressed in B. subtilis. The hybrid plasmids seem to be more unstable in B. subtilis than in E. coli.     

Multiple roles for DNA polymerase I in establishment and replication of the promiscuous plasmid pLS1

The polymerase activity of DNA polymerase I is important for the establishment of the pLS1 replicon by reconstitutive assembly in Streptococcus pneumoniae after uptake of exogenous pLS1 plasmid DNA. In polA mutants lacking the polymerase domain, such establishment was reduced at least 10-fold in frequency. Chromosomally facilitated establishment of pLS1-based plasmids carrying DNA homologous to the host chromosome was not so affected. However, both types of plasmid transfer gave mostly small colonies on initial selection, which was indicative of a defect in replication and filling of the plasmid pool. Once established, the pLS1-based plasmids replicated in polA mutants, but they showed segregational instability. This defect was not observed in strains with the wild-type enzyme or in an S. pneumoniae strain that encodes the polymerase and exonuclease domains of the enzyme on separate fragments. The role of DNA polymerase I in stably maintaining the plasmids depends on its polymerizing function in three separate steps of rolling-circle replication, as indicated by the accumulation of different replication intermediate forms in polA mutants. Furthermore, examination of the segregational stability of the pLS1 replicon in an Escherichia coli mutant system indicated that both the polymerase and the 5′-to-3′ exonuclease activities of DNA polymerase I function in plasmid replication.     

Closely related plasmids from Staphylococcus aureus and soil bacilli

Antibiotic resistance plasmids from staphylococci and soil bacilli have been isolated and compared. A tetracycline resistance (Tc^r) plasmid, indistinguishable from pT181, which is typical of Tc^r plasmids that are widely dispersed among human clinical isolates of S. aureus, has been found also in bovine mastitis isolates. This plasmid, however, shows no detectable homology to a family of related Tc^r plasmids, typified by pBC16, that is widely dispersed among aerobic spore-forming bacilli. However, and rather unexpectedly, pBC16 is highly homologous to and incompatible with pUB110, an S. aureus plasmid specifying kanamycin resistance. The two plasmids are homologous except for the region occupied by their resistance determinants, which has the appearance of a heterologous substitution. These results suggest the occurrence of natural plasmid transfer between staphylococci and soil bacilli.     

Interplasmidic illegitimate recombination in Bacillus subtilis

Summary The illegitimate recombination between Staphylococcus aureus plasmids pE194 (or pGG20, the hybrid between pE194 and Escherichia coli plasmid pBR322) and pBD17 (plasmid pUB110 without HpaII C-fragment) was studied in Bacillus subtilis. Cointegrates were generated with the frequency of 1–3x10^-8. Among 22 hybrids analysed 9 types of recombinants were found. Nucleotide sequences of all three parental plasmids were involved in intermolecular recombination. Nucleotide sequencing of recombinant DNA junctions revealed that in 8 cases recombination occurred between short homologous regions (9–15 bp). One recombinant was formed using nonhomologous sites. The similarity was demonstrated between nucleotide sequences of the recombination sites of two types of cointegrates and those used for pE194 integration into the B. subtilis chromosome. Possible mechanisms of illegitimate recombination are discussed.     

Functional substitution of the recE gene of Bacillus subtilis by the recA gene of Proteus mirabilis

Summary Rec mutants of Bacillus subtilis have been tested for complementation by the recA gene of Proteus mirabilis (recApm) which was introduced into B. subtilis via the plasmid pHP334. In the recE4 mutant of B. subtilis the plasmid pHP334 restored significantly the defects in RecE functions tested: UV-sensitivity, homologous recombination (transduction and transformation) and prophage induction.Although serological methods to detect the presence of RecApm protein in B. subtilis have been unsuccessful, our results strongly indicate that the recE function of B. subtilis is analogous to the recA function of P. mirabilis.Abbreviations Cm^r resistance to chloramphenicol - Em^r resistance to erythromycin - Tc^r resistance to tetracycline - SDS sodium dodecyl sulfate - UV ultraviolet - AS ammonium sulfate     

Direct plasmid transfer from replica-plated E. coli colonies to competent B. subtilis cells. Identification of an E. coli clone carrying the hisH and tyrA genes of B. subtilis

Summary We have cloned the hisH tyrA wild-type genes of Bacillus subtilis with the aid of the chimeric plasmid pBJ194, which replicates both in B. subtilis and Escherichia coli. Primary cloning was done in E. coli. The original E. coli clone, carrying the recombinant plasmid (pGR1) which complements hisH tyrA mutants of B. subtilis, was selected directly from a mixture of plated E. coli clones by replicaplating these clones onto minimal agar plates without tyrosine spread just before with competent B. subtilis cells. After overnight incubation clusters of small colonies had developed exclusively in the E. coli [pGR1] colony prints.The Tyr⁺ minicolonies were shown to be B. subtilis carrying pGR1 because (i) their appearance depended linearly on the number of B. subtilis cells plated, (ii) they produced extracellular protease and amylase and (iii) plasmids could be reisolated from the minicolonies and used to transform B. subtilis recE4 tyrA1 both to Cm^r and Tyr⁺.Plasmid pGR1 transfer through replica plating was compared with plasmid transfer in liquid. Both systems depended on transformable B. subtilis strains and were sensitive to DNAseI. However, whereas integration of the tyrA ⁺ gene into the chromosome and concomittant loss of plasmids occurred frequently during regular plasmid transformation of Rec⁺ B. subtilis, this was a rare event during plasmid transfer through replica plating.     

A functional map of the replicator region of the octopine Ti plasmid

A hybrid plasmid of pUB 110 (Neo^r) and pAB 124 (Tc^r) has been constructed and shown to have a Neo^sTc^r phenotype in Bacillus subtilis. A derivative of this pUB 110:pAB 124 hybrid has been isolated, pAB 324, which has the expected Neo^rTc^r phenotype. A restriction endonuclease cleavage map of pAB 324 was compared to that of the parent hybrid. This showed that pAB 324 contained a minimum of two deletions and one insertion. This insertion (approximately 1.0 Md) has been identified as originating from the Bacillus subtilis chromosome.     

Replication of the promiscuous plasmid pLSI: a region encompassing the minus origin of replication is associated with stable plasmid inheritance

Deletion of a region of the promiscuous plasmid pLS1 encompassing the initiation signals for the synthesis of the plasmid lagging strand led to plasmid instability in Streptococcus pneumoniae and Bacillus subtilis. This defect could not be alleviated by increasing the number of copies (measured as double-stranded plasmid DNA) to levels similar to those of the wild-type plasmid pLS1. Our results indicate that in the vicinity of, or associated with the single-stranded origin region of pLS1 there is a plasmid component involved in its stable inheritance. Homology was found between the DNA gyrase binding site within the par region of plasmid pSC101 and the pLS1 specific recombination site RS_R.     

Physical characterization of the plasmid pON5300

Summary The antibiotic resistance plasmid Rldrd19Km-which has spontaneously lost its kanamycin resistance marker, and its derivative pON5300, were analysed using the restriction endonucleases SalI, BamHI, HindIII and EcoRI. The fragment patterns were compared with that of the Rldrd19 and the fragments responsible for kanamycin resistance were found to be missing in Rldrd19Km ^– and pON5300. In these plasmids a 7 Mg/mol EcoRI fragment was observed instead of the D (6.3 Mg/mol) fragment of Rldrd19. Further a new 6 Mg/mol EcoRI restriction fragment was observed in pON5300. Using double digestions it was shown that the new fragment does not carry restriction sites for HindIII, BamHI and SalI endonucleases. The non-homology of the analysed plasmid was proved electron microscopically by heteroduplex techniques. The possibility of amplification in the regulatory region for the expression of R-determinants in pON5300 is discussed.     

Evidence for multiple carboxymethylcellulase genes in Pseudomonas fluorescens subsp. cellulosa

Summary A genomic library of Pseudomonas fluorescens subsp. cellulosa DNA was constructed in bacteriophage 47.1 and recombinants expressing carboxymethylcellulase (CMCase) activity isolated. A 7.3 kb partial EcoRI fragment, a 9.4 kb EcoRI fragment and a 5.8 kb HindIII fragment were subcloned from three different phages into pUC18 to yield recombinant plasmids pJHH1, pJHH3 and pGJH2 respectively. Cells of Escherichia coli harbouring these plasmids expressed CMCase activity. The positions of the CMCase genes in the three plasmids were determined by subcloning and transposon mutagenesis. pJHH1 contained two distinct DNA regions encoding CMCases, which were controlled by the same promoter. All four cloned enzymes cleaved p-nitrophenyl--D-glucopyranoside, although at a very low rate, but none exhibited exoglucanase activity. In common with other extracellular enzymes cloned in E. coli, all the CMCases were exported to the periplasmic space in the enteric bacterium. The carboxymethylcellulase genes encoded by pJHH1 and pJHH3, were subject to glucose repression in E. coli.Abbreviations SSC 0.15 M NaCl, 0.015 M sodium citrate - Sm^r resistance to streptomycin - Km^r resistance to kanamycin - Ap^r resistance to ampicillin - Tc^r resistance to tetracycline - Cm^r resistance to chloramphenicol - CMCase carboxymethylcellulase     

Syntheses and Flavors of Four Possible Optical Isomers of Marmelo Lactones

We have isolated a tetracycline-resistant (Tc^r) Bacillus species (named HE-1) which carries multiple plasmids. HE-1 was identified as Bacillus cereus and found to bear four plasmids. Tetracycline resistance could be attributed to one of four plasmids (designated as pTIT β2 (4.7 kb)) indistinguishable from pBC16, a Tc^r plasmid formerly found in B. cereus [K. Bernhard, H. Schrempf, and W. Goebel, J. Bacteriol., 133, 897 (1978)]. All the other three plasmids (named pTITα (4.0 kb), pTIT β1 (4.7 kb) and pTIT γ (12.4 kb)) were cryptic and did not correlate with bacterial phenotypic traits such as antibiotic resistance or antibiotic and bacteriocin production. B. cereus HE-1 also showed resistance to penicillin, but this seemed very likely to be chromosomally determined in B. cereus. Of interest was the fact that pTITα, pTIT β1, and pTITγ had a noticeable DNA homology among them in blot hybridization. pTIT β2 alone did not shared sequence homology with the other three plasmids.     

The first high frequency of recombination-like conjugal transfer from an integrated origin of transfer sequence in Bacillus subtilis 168

Bacillus subtilis 168 was developed as a genome vector to manipulate large DNA fragments. The system is based on the inherent natural transformation (TF) activity. However, DNA size transferred by TF is limited up to approximately 100 kb. A conjugal transfer system capable of transferring DNA fragments considerably larger than those transferred by TF was developed. A well-defined oriT¹¹⁰ sequence and a cognate relaxase gene from the pUB110 plasmid were inserted into the xkdE gene of the B. subtilis genome. Transfer of antibiotic resistance markers distant from the oriT¹¹⁰ locus to the recipient B. subtilis occurred only in the presence of pLS20, a helper plasmid that provides a type IV secretion system. Marker transmission was consistent with the orientation of oriT¹¹⁰ and required a recA-proficient recipient. The first conjugal transfer system of genomic DNA should provide a valuable alternative genetic tool for editing the B. subtilis genome.     

Identification of the Product of Sporulation Gene spo0B in Bacillus subtilis

A 1.4-megadalton EcoRI restriction fragment carrying Bacillus subtilis sporulation gene spo0B was cloned from the specialized transducing phage, φ 105spo0B, into a unique EcoRI site of plasmid vector pUB110, and four plasmids having a deletion in the 1.4-megadalton EcoRI fragment were constructed. Analysis of the polypeptides synthesized in B. subtilis minicells harboring these plasmids and the sporulation ability of strain UOT0436 (spo0B136 recE4) harboring these plasmids showed that the spo0B gene product is a polypeptide of 24,000 daltons. Two-dimensional polyacrylamide gel analysis showed that the isoelectric point of this protein is almost neutral.