Biofilm reduction by a new burn gel that targets nociception

AIMS: To compare the ability of an amorphous first aid topical gel containing vinegar, citric acid and EDTA (RescuDerm(TM); RESC) and various derivative formulations to eradicate Pseudomonas aeruginosa (PSEUD) and Staphylococcus epidermidis (STAPH) biofilms. METHODS AND RESULTS: 24-h biofilms prepared using the Minimum Biofilm Elimination Concentration (MBEC) Assay System were exposed for 4 or 24 h to the different gel formulations. Citric acid-free, acetic acid-free or acetic acid-free/sodium acetate-supplemented RESC gels reduced PSEUD and STAPH biofilm formation as effectively as RESC. Substituting the weak organic acids with equivalent concentrations of glacial acetic acid reduced the effectiveness of gel against PSEUD and STAPH biofilms by half, but viable bacterial counts still remained below 4 log(10) CFU/peg. Removal of gelling agent and/or EDTA enhanced efficacy against PSEUD but not STAPH biofilms. An acidified placebo gel formulation generated an only marginal bactericidal effect compared to that of RESC. CONCLUSIONS: RESC is a promising new antimicrobial agent. Its weak organic acid content, rather than merely acidic pH, mediates its considerable in vitro bactericidal efficacy against bacterial biofilms. SIGNIFICANCE AND IMPACT OF THE STUDY: These data, taken together with the observation that RescuDerm possesses broad in vitro bactericidal activity against other pathogen species, suggest the potential usefulness of this product for controlling biofilm formation on a variety of cutaneous traumatic and surgical wounds.     

Sodium dodecyl sulfate allows the persistence and recovery of biofilms of Pseudomonas fluorescens formed under different hydrodynamic conditions

The effect of the anionic surfactant sodium dodecyl sulfate (SDS) on Pseudomonas fluorescens biofilms was investigated using flow cell reactors with stainless steel substrata, under turbulent (Re = 5200) and laminar (Re = 2000) flow. Steady-state biofilms were exposed to SDS in single doses (0.5, 1, 3 and 7 mM) and biofilm respiratory activity and mass measured at 0, 3, 7 and 12 h after the SDS application. The effect of SDS on biofilm mechanical stability was assessed using a rotating bioreactor. Whilst high concentrations (7 mM) of SDS promoted significant biofilm inactivation, it did not significantly reduce biofouling. Turbulent and laminar flow-generated biofilms had comparable susceptibility to SDS application. Following SDS exposure, biofilms rapidly recovered over the following 12 h, achieving higher respiratory activity values than before treatment. This phenomenon of post-treatment recovery was more pronounced for turbulent flow-generated biofilms, with an increase in SDS concentration. The mechanical stability of the biofilms increased with surfactant application, except for SDS concentrations near the critical micellar concentration, as measured by biofilm removal due to an increase in external shear stress forces. The data suggest that although SDS exerts antimicrobial action against P. fluorescens biofilms, even if only partial and reversible, it had only limited antifouling efficacy, increasing biofilm mechanical stability at low concentrations and allowing significant and rapid recovery of turbulent flow-generated biofilms.     

Using enzymes to remove biofilms of bacterial isolates sampled in the food-industry

The aim of this study was to analyze the cleaning efficiency of polysaccharidases and proteolytic enzymes against biofilms of bacterial species found in food industry processing lines and to study enzyme effects on the composition of extracellular polymeric substances (EPS) and biofilm removal in a Clean-in-Place (CIP) procedure. The screening of 7 proteases and polysaccharidases for removal of biofilms of 16 bacterial species was first evaluated using a microtiter plate assay. The alkaline pH buffer removed more biofilm biomass as well as affecting a larger range of bacterial species. The two serine proteases and α-amylase were the most efficient enzymes. Proteolytic enzymes promoted biofilm removal of a larger range of bacterial species than polysaccharidases. Using three isolates derived from two bacterial species widely found in food processing lines (Pseudomonas fluorescens and the Bacillus cereus group), biofilms were developed on stainless steel slides and enzymatic solutions were used to remove the biofilms using CIP procedure. Serine proteases were more efficient in removing cells of Bacillus biofilms than polysaccharidases. However, polysaccharidases were more efficient in removing P. fluorescens biofilms than serine proteases. Solubilization of enzymes with a buffer containing surfactants, and dispersing and chelating agents enhanced the efficiency of polysaccharidases and proteases respectively in removing biofilms of Bacillus and P. fluorescens. A combination of enzymes targeting several components of EPS, surfactants, dispersing and chelating agents would be an efficient alternative to chemical cleaning agents.     

Glycerol monolaurate antibacterial activity in broth and biofilm cultures

Background

Glycerol monolaurate (GML) is an antimicrobial agent that has potent activity against gram-positive bacteria. This study examines GML antibacterial activity in comparison to lauric acid, in broth cultures compared to biofilm cultures, and against a wide range of gram-positive, gram-negative, and non-gram staining bacteria.

Methodology/Principal Findings

GML is ≥200 times more effective than lauric acid in bactericidal activity, defined as a ≥3 log reduction in colony-forming units (CFU)/ml, against Staphylococcus aureus and Streptococcus pyogenes in broth cultures. Both molecules inhibit superantigen production by these organisms at concentrations that are not bactericidal. GML prevents biofilm formation by Staphylococcus aureus and Haemophilus influenzae, as representative gram-positive and gram-negative organisms, tested in 96 well microtiter plates, and simultaneously is bactericidal for both organisms in mature biofilms. GML is bactericidal for a wide range of potential bacterial pathogens, except for Pseudomonas aeruginosa and Enterobacteriaceae. In the presence of acidic pH and the cation chelator ethylene diamine tetraacetic acid, GML has greatly enhanced bactericidal activity for Pseudomonas aeruginosa and Enterobacteriaceae. Solubilization of GML in a nonaqueous delivery vehicle (related to K-Y Warming®) enhances its bactericidal activity against S. aureus. Both R and S, and 1 and 2 position lauric acid derivatives of GML exhibit bactericidal activity. Despite year-long passage of Staphylococcus aureus on sub-growth inhibitory concentrations of GML (0.5 x minimum bactericidal concentration), resistance to GML did not develop.

Conclusions/Significance

GML may be useful as a broad-spectrum human or animal topical microbicide and may be useful as an environmental surface microbicide for management of bacterial infections and contamination.     

The Natural Antimicrobial Carvacrol Inhibits Quorum Sensing in Chromobacterium violaceum and Reduces Bacterial Biofilm Formation at Sub-Lethal Concentrations

The formation of biofilm by bacteria confers resistance to biocides and presents problems in medical and veterinary clinical settings. Here we report the effect of carvacrol, one of the major antimicrobial components of oregano oil, on the formation of biofilms and its activity on existing biofilms. Assays were carried out in polystyrene microplates to observe (a) the effect of 0–0.8 mM carvacrol on the formation of biofilms by selected bacterial pathogens over 24 h and (b) the effect of 0–8 mM carvacrol on the stability of pre-formed biofilms. Carvacrol was able to inhibit the formation of biofilms of Chromobacterium violaceum ATCC 12472, Salmonella enterica subsp. Typhimurium DT104, and Staphylococcus aureus 0074, while it showed no effect on formation of Pseudomonas aeruginosa (field isolate) biofilms. This inhibitory effect of carvacrol was observed at sub-lethal concentrations (<0.5 mM) where no effect was seen on total bacterial numbers, indicating that carvacrol''s bactericidal effect was not causing the observed inhibition of biofilm formation. In contrast, carvacrol had (up to 8 mM) very little or no activity against existing biofilms of the bacteria described, showing that formation of the biofilm also confers protection against this compound. Since quorum sensing is an essential part of biofilm formation, the effect of carvacrol on quorum sensing of C. violaceum was also studied. Sub-MIC concentrations of carvacrol reduced expression of cviI (a gene coding for the N-acyl-L-homoserine lactone synthase), production of violacein (pigmentation) and chitinase activity (both regulated by quorum sensing) at concentrations coinciding with carvacrol''s inhibiting effect on biofilm formation. These results indicate that carvacrol''s activity in inhibition of biofilm formation may be related to the disruption of quorum sensing.     

In vitro efficacy of bismuth thiols against biofilms formed by bacteria isolated from human chronic wounds

Aims: The purpose of this study was to evaluate the antimicrobial efficacy of thirteen bismuth thiol preparations for bactericidal activity against established biofilms formed by two bacteria isolated from human chronic wounds. Methods: Single species biofilms of a Pseudomonas aeruginosa or a methicillin‐resistant Staphylococcus aureus were grown in either colony biofilm or drip‐flow reactors systems. Biofilms were challenged with bismuth thiols, antibiotics or silver sulfadiazine, and log reductions were determined by plating for colony formation. Conclusions: Antibiotics were ineffective or inconsistent against biofilms of both bacterial species tested. None of the antibiotics tested were able to achieve >2 log reductions in both biofilm models. The 13 different bismuth thiols tested in this investigation achieved widely varying degrees of killing, even against the same micro‐organism in the same biofilm model. For each micro‐organism, the best bismuth thiol easily outperformed the best conventional antibiotic. Against P. aeruginosa biofilms, bismuth‐2,3‐dimercaptopropanol (BisBAL) at 40–80 μg ml^?1 achieved >7·7 mean log reduction for the two biofilm models. Against MRSA biofilms, bismuth‐1,3‐propanedithiol/bismuth‐2‐mercaptopyridine N‐oxide (BisBDT/PYR) achieved a 4·9 log reduction. Significance and Impact of the Study: Bismuth thiols are effective antimicrobial agents against biofilms formed by wound bacteria and merit further development as topical antiseptics for the suppression of biofilms in chronic wounds.     

Protozoan grazing and its impact upon population dynamics in biofilm communities

AIMS: To determine the impact of protozoan grazing on the population dynamics of a multispecies bacterial biofilm community. METHODS AND RESULTS: Grazing by Acanthamoeba castellanii and the ciliate Colpoda maupasi upon biofilm and planktonic communities, composed of Klebsiella pneumoniae, Pseudomonas fluorescens and Staphylococcus epidermidis was investigated. Biofilms were formed using glass coverslips, held in a carousel device, as substrata for biofilm formation or in glass flow cells. The predatory effects of the amoeba were generally confined to the biofilm, where grazing rates corresponded to losses from the biofilm equivalent to ca 30,000 biofilm cells cm(-2) h(-1), with the amoeba becoming an integral part of the community. C. maupasi reduced the thickness of mature multispecies biofilms at steady-state from 500 to <200 microm. CONCLUSIONS: We report that the presence of the protozoa A. castellanii and C. maupasi markedly influence population dynamics within defined biofilm communities. SIGNIFICANCE AND IMPACT OF THE STUDY: The current study dispels the popular opinion that biofilms are protected against predation by protozoa. A. castellanii clearly has the capacity to graze mixed biofilm communities and to become integrally associated with them, whereas the ciliate C. maupasi reduced biofilm thickness by up to 60%.     

Effect of different concentrations of ortho-phthalaldehyde on biofilms formed by Pseudomonas fluorescens under different flow conditions

The effectiveness of different concentrations of ortho-phthalaldehyde (OPA) in controlling biofilms of Pseudomonas fluorescens formed on stainless steel slides, using flow cell reactors under laminar and turbulent flow, was investigated by determining the variation in mass and respiratory activity. The physical stability of the biofilm with and without exposure to OPA was studied in a rotating device as variation in the mass of the biofilm on the surface after exposure to different rotation velocities. The activity of OPA against bacterial suspended cultures was evaluated in the presence and absence of bovine serum albumin (BSA) in order to evaluate the interference of proteins on the activity of the biocide. The results showed that biofilms formed under different flow conditions had different properties and reacted differently after biocide application. Biofilms formed under laminar flow were more easily inactivated than those formed under turbulent conditions. However, OPA did not promote the detachment of biofilms from the surface. The exposure of biofilms to different shear stress conditions after OPA treatment enhanced removal from the surface, indicating that OPA may weaken the biofilm matrix. The biocide was more effective on suspended cells than on cells grown in biofilms. This fact may be explained by the reaction of the biocide with proteins of the polymeric matrix of the biofilm as suggested by the significant reduction of biocide action on suspended cells in the presence of BSA.     

Effective Removal of Staphylococcal Biofilms by the Endolysin LysH5

Staphylococcal biofilms are a major concern in both clinical and food settings because they are an important source of contamination. The efficacy of established cleaning procedures is often hindered due to the ability of some antimicrobial compounds to induce biofilm formation, and to the presence of persister cells, a small bacterial subpopulation that exhibits multidrug tolerance. Phage lytic enzymes have demonstrated antimicrobial activity against planktonic and sessile bacteria. However, their ability to lyse and/or select persister cells remains largely unexplored so far. In this work, the lytic activity of the endolysin LysH5 against Staphylococcus aureus and Staphylococcus epidermidis biofilms was confirmed. LysH5 reduced staphylococcal sessile cell counts by 1–3 log units, compared with the untreated control, and sub-inhibitory concentrations of this protein did not induce biofilm formation. LysH5-surviving cells were not resistant to the lytic activity of this protein, suggesting that no persister cells were selected. Moreover, to prove the lytic ability of LysH5 against this subpopulation, both S. aureus exponential cultures and persister cells obtained after treatment with rifampicin and ciprofloxacin were subsequently treated with LysH5. The results demonstrated that besides the notable activity of endolysin LysH5 against staphylococcal biofilms, persister cells were also inhibited, which raises new opportunities as an adjuvant for some antibiotics.     

Effect of Different Concentrations of Ortho-phthalaldehyde on Biofilms Formed by Pseudomonas fluorescens Under Different Flow Conditions

The effectiveness of different concentrations of ortho-phthalaldehyde (OPA) in controlling biofilms of Pseudomonas fluorescens formed on stainless steel slides, using flow cell reactors under laminar and turbulent flow, was investigated by determining the variation in mass and respiratory activity. The physical stability of the biofilm with and without exposure to OPA was studied in a rotating device as variation in the mass of the biofilm on the surface after exposure to different rotation velocities. The activity of OPA against bacterial suspended cultures was evaluated in the presence and absence of bovine serum albumin (BSA) in order to evaluate the interference of proteins on the activity of the biocide. The results showed that biofilms formed under different flow conditions had different properties and reacted differently after biocide application. Biofilms formed under laminar flow were more easily inactivated than those formed under turbulent conditions. However, OPA did not promote the detachment of biofilms from the surface. The exposure of biofilms to different shear stress conditions after OPA treatment enhanced removal from the surface, indicating that OPA may weaken the biofilm matrix. The biocide was more effective on suspended cells than on cells grown in biofilms. This fact may be explained by the reaction of the biocide with proteins of the polymeric matrix of the biofilm as suggested by the significant reduction of biocide action on suspended cells in the presence of BSA.     

Biofilm development during the start-up period of anaerobic biofilm reactors: the biofilm Archaea community is highly dependent on the support material

To evaluate the impact of the nature of the support material on its colonization by a methanogenic consortium, four substrata made of different materials: polyvinyl chloride, 2 polyethylene and polypropylene were tested during the start-up of lab-scale fixed-film reactors. The reactor performances were evaluated and compared together with the analysis of the biofilms. Biofilm growth was quantified and the structure of bacterial and archaeal communities were characterized by molecular fingerprinting profiles (capillary electrophoresis-single strand conformation polymorphism). The composition of the inoculum was shown to have a major impact on the bacterial composition of the biofilm, whatever the nature of the support material or the organic loading rate applied to the reactors during the start-up period. In contrast, the biofilm archaeal populations were independent of the inoculum used but highly dependent on the support material. Supports favouring Archaea colonization, the limiting factor in the overall process, should be preferred.     

Biofilm formation by Pseudomonas aeruginosa in solid murine tumors - a novel model system

The ability of opportunistic bacterial pathogens to grow in biofilms is decisive in the pathogenesis of chronic infectious diseases. Growth within biofilms does not only protect the bacteria against the host immune system but also from the killing by antimicrobial agents. Here, we introduce a mouse model in which intravenously administered planktonic Pseudomonas aeruginosa bacteria are enriched in transplantable subcutaneous mouse tumors. Electron microscopy images provide evidence that such bacteria reside in the tumor tissue within biofilm structures. Immunohistology furthermore demonstrated that infection of the tumor tissue elicits a host response characterized by strong neutrophilic influx. Interestingly, the biofilm defective PA14 pqsA transposon mutant formed less biofilm in vivo and was more susceptible to clearance by intravenous ciprofloxacin treatment as compared to the wild-type control. In conclusion, we have established an experimentally tractable model that may serve to identify novel bacterial and host factors important for in vivo biofilm formation and to re-evaluate bactericidal and anti-biofilm effects of currently used and novel antibacterial compounds.     

Biofilm ecology: On-line methods bring new insights into mic and microbial biofouling

Microbial biofilms were formed on coupons with defined coatings in once-through laminar flow fields of controlled bulk-phase composition and shear. Dilute media were utilized to select for biofilm growth. The formation, succession, and stability of the biofilms were monitored with non-destructive on-line methods (fluorescence, bioluminescence, attenuated total reflectance Fourier transform infrared spectrometry [ATR-FTIR] and electrochemical impedance spectroscopy) and by high resolution destructive analysts (viable and direct counts and phospholipid fatty acid signature methods) at the termination of the experiments. Biofilms of reproducible composition can be formed and the order of inoculation of multi-component biofilms affects their composition at harvest. The corrosion rates of mild steel depended on the biofilm composition but not the attached biomass. Examination of biofilms with the scanning vibrating electrode in a microscope field showed effects of heterogeneity in biofilm structure which promoted localized anodic activity. Pseudomonas stains were engineered to contain the lux gene cassette as a "reporter"; and the formation of the exopolymer alginate was shown not to promote attachment of the strain or secondary colonization by Vibrio. Examination of mutants forming different alginate structures showed differential attachment and biofilm structure. Studies of mutants of lipopolysaccharide structure showed differential attachment to substrata. Specific antifouling and fouling-release coatings showed a wide range of attachment and release properties as well as sublethal toxicity.     

Effect of permeabilizing agents on antibacterial activity against a simple Pseudomonas aeruginosa biofilm

A simple Pseudomonas aeruginosa G48 biofilm on stainless steel discs provided a useful primary screen of the potentiating effects of various permeabilizing agents on antibacterial agents. Experiments with Ps. aeruginosa suspensions could not be used to predict the effects of biocides and permeabilizers on biofilms. Although antibacterial activity against biofilms was less than demonstrated in suspension tests, potentiation by some permeabilizers was still observed.     

A conductance-based surface disinfection test for food hygiene

A surface disinfectant test method for food hygiene is described in which biocidal action was assessed using bacterial biofilms developed on stainless steel. The viability of control and surface-bound treated biofilms was assessed, using a Malthus microbiological growth analyser. The surface test was compared with the European Suspension Test on three bacteria, Pseudomonas aeruginosa, Staphylococcus aureus and Proteus mirabilis , for 12 commonly used food surface disinfectants. In all cases the bacteria were shown to be up to 10 times more resistant to biocides, and in seven cases up to 100 times more resistant, when surface-attached. Disinfectants that performed well against bacteria in suspension did not necessarily perform well against the same bacteria when attached to surfaces.     

The effect of hydrodynamic conditions on the phenotype of Pseudomonas fluorescens biofilms

This study investigated the phenotypic characteristics of monoculture P. fluorescens biofilms grown under turbulent and laminar flow, using flow cells reactors with stainless steel substrata. The cellular physiology and the overall biofilm activity, structure and composition were characterized, and compared, within hydrodynamically distinct conditions. The results indicate that turbulent flow-generated biofilm cells were significantly less extensive, with decreased metabolic activity and a lower protein and polysaccharides composition per cell than those from laminar flow-generated biofilms. The effect of flow regime did not cause significantly different outer membrane protein expression. From the analysis of biofilm activity, structure and composition, turbulent flow-generated biofilms were metabolically more active, had twice more mass per cm(2), and higher cellular density and protein content (mainly cellular) than laminar flow-generated biofilms. Conversely, laminar flow-generated biofilms presented higher total and matrix polysaccharide contents. Direct visualisation and scanning electron microscopy analysis showed that these different flows generate structurally different biofilms, corroborating the quantitative results. The combination of applied methods provided useful information regarding a broad spectrum of biofilm parameters, which can contribute to control and model biofilm processes.     

Linoleic acid inhibits Pseudomonas aeruginosa biofilm formation by activating diffusible signal factor‐mediated quorum sensing

Bacterial biofilm formation causes serious problems in various fields of medical, clinical, and industrial settings. Antibiotics and biocide treatments are typical methods used to remove bacterial biofilms, but biofilms are difficult to remove effectively from surfaces due to their increased resistance. An alternative approach to treatment with antimicrobial agents is using biofilm inhibitors that regulate biofilm development without inhibiting bacterial growth. In the present study, we found that linoleic acid (LA), a plant unsaturated fatty acid, inhibits biofilm formation under static and continuous conditions without inhibiting the growth of Pseudomonas aeruginosa. LA also influenced the bacterial motility, extracellular polymeric substance production, and biofilm dispersion by decreasing the intracellular cyclic diguanylate concentration through increased phosphodiesterase activity. Furthermore, quantitative gene expression analysis demonstrated that LA induced the expression of genes associated with diffusible signaling factor‐mediated quorum sensing that can inhibit or induce the dispersion of P. aeruginosa biofilms. These results suggest that LA is functionally and structurally similar to a P. aeruginosa diffusible signaling factor (cis‐2‐decenoic acid) and, in turn, act as an agonist molecule in biofilm dispersion.     

In vitro activity of the antimicrobial peptide AP7121 against the human methicillin-resistant biofilm producers Staphylococcus aureus and Staphylococcus epidermidis

Abstract

In vitro activity against methicillin-resistant Staphylococcus aureus (MRSA) and Staphylococcus epidermidis biofilm producers from blood cultures of patients with prosthetic hip infections was evaluated. The Minimum Inhibitory Concentration (MIC) for AP7121 was determined and the bactericidal activity of AP7121 (MICx1, MICx4) against planktonic cells was studied at 4, 8 and 24?h. The biofilms formed were incubated with AP7121 (MICx1, MICx4) for 1 and 24?h. The anti-adhesion effect of an AP7121-treated inert surface over the highest MIC isolate was studied with scanning electron microscopy (SEM). The bactericidal activity of AP7121 against all the planktonic staphylococcal cells was observed at 4?h at both peptide concentrations. Dose-dependent anti-biofilm activity was detected. AP7121 (MICx4) showed bactericidal activity at 24?h in all isolates. SEM confirmed prevention of biofilm formation. This research showed the in vitro anti-biofilm activity of AP7121 against MRSA and S. epidermidis and the prevention of biofilm formation by them on an abiotic surface.     

mucA基因突变的黏液型铜绿假单胞菌PA17与PD0300生物被膜形态观察和耐药性比较

目的研究新的mucA基因缺失突变的黏液型铜绿假单胞菌PA17和经典mucA基因点突变的黏液型铜绿假单胞菌PD0300在生物被膜状态下对临床常用抗菌药物的耐药性变化,探讨mucA基因突变对铜绿假单胞菌生物被膜形态及细菌耐药性的影响。方法改良的平板法建立生物被膜,将含绿色荧光蛋白的pUCP／UV质粒转化两株铜绿假单胞菌,激光共聚焦显微镜下观察生物被膜形态;采用琼脂二倍稀释法测定常用β-内酰胺类,氨基甙类,喹诺酮类抗菌药物对铜绿假单胞菌菌株PA17、PD0300的最低抑菌浓度（MIC）;利用96孔板建立生物被膜测定抗菌药物对第五天成熟生物被膜内细菌的最低杀菌浓度（MBC）。结果新的mucA基因缺失突变的黏液型PA17成熟生物被膜呈薄膜状、经典mucA基因点突变的黏液型PD0300成熟生物被膜呈蘑菇状;在浮游状态下PA17、PD0300对头孢他啶（CAZ）、妥布霉素（TOB）、庆大霉素（GEN）、亚胺培南（IPM）敏感,而对左氧氟沙星（LVX）、环丙沙星（CIP）不敏感,两者具有一致的耐药性;生物被膜状态下两者对抗菌药物敏感性降低20—8000倍;黏液型PD0300成熟生物被膜对抗菌药物敏感性低于黏液型PA17。结论黏液型铜绿假单胞菌在相同条件下能形成不同形态的生物被膜;生物被膜状态下较浮游状态下对常用抗菌药物敏感性明显下降,同时生物被膜形态也影响抗菌药物敏感性。     

Eradication of Pseudomonas aeruginosa Biofilms by Atmospheric Pressure Non-Thermal Plasma

Bacteria exist, in most environments, as complex, organised communities of sessile cells embedded within a matrix of self-produced, hydrated extracellular polymeric substances known as biofilms. Bacterial biofilms represent a ubiquitous and predominant cause of both chronic infections and infections associated with the use of indwelling medical devices such as catheters and prostheses. Such infections typically exhibit significantly enhanced tolerance to antimicrobial, biocidal and immunological challenge. This renders them difficult, sometimes impossible, to treat using conventional chemotherapeutic agents. Effective alternative approaches for prevention and eradication of biofilm associated chronic and device-associated infections are therefore urgently required. Atmospheric pressure non-thermal plasmas are gaining increasing attention as a potential approach for the eradication and control of bacterial infection and contamination. To date, however, the majority of studies have been conducted with reference to planktonic bacteria and rather less attention has been directed towards bacteria in the biofilm mode of growth. In this study, the activity of a kilohertz-driven atmospheric pressure non-thermal plasma jet, operated in a helium oxygen mixture, against Pseudomonas aeruginosa in vitro biofilms was evaluated. Pseudomonas aeruginosa biofilms exhibit marked susceptibility to exposure of the plasma jet effluent, following even relatively short (～10's s) exposure times. Manipulation of plasma operating conditions, for example, plasma operating frequency, had a significant effect on the bacterial inactivation rate. Survival curves exhibit a rapid decline in the number of surviving cells in the first 60 seconds followed by slower rate of cell number reduction. Excellent anti-biofilm activity of the plasma jet was also demonstrated by both confocal scanning laser microscopy and metabolism of the tetrazolium salt, XTT, a measure of bactericidal activity.