Structure and properties of regenerated Antheraea pernyi silk fibroin in aqueous solution

Antheraea pernyi silk fibroin fibers were dissolved by aqueous lithium thiocyanate to obtain regenerated A. pernyi silk fibroin solution. By means of circular dichroism, ¹³C NMR and Raman spectroscopy, the molecular conformation of regenerated A. pernyi silk fibroin in aqueous solution was investigated. The relationship of environmental factors and sol–gel transformation behavior of regenerated A. pernyi silk fibroin was also studied. The molecular conformations of regenerated A. pernyi silk fibroin mainly were -helix and random coil in solution. There also existed a little β-sheet conformation. It was obviously different with Bombyx mori silk fibroin, whose molecular conformation in solution was only random coil but no -helix existence. With the increase of temperature and solution concentration and with the decrease of solution pH value, the gelation velocity of regenerated A. pernyi silk fibroin solution increased. Especially, it showed that A. pernyi silk fibroin was more sensitive to temperature than B. mori silk fibroin during the sol–gel transformation. The velocity increased obviously when the temperature was above 30 °C. During the sol–gel transformation, the molecular conformation of regenerated A. pernyi silk fibroin changed from random coil to β-sheet structure. The results of these studies provided important insight into the preparation of new biomaterials by silk fibroin protein.     

Swelling and dissolution of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide.

Bombyx mori silk fibers were dissolved in N-methyl morpholine N-oxide (MMNO), an organic cyclic amine oxide used for the solvent spinning of regenerated cellulosic fibers. The commercial MMNO monohydrate used in this study as a solvent for silk is a hygroscopic compound crystalline at room temperature, which becomes an active solvent after melting at 76 degrees C. The degree of hydration of MMNO was checked by DSC measurements. The solvation power of MMNO towards silk fibroin drastically decreased at a water content > or = 20-21% w/w. Dissolution of silk required both thermal and mechanical energy. The optimum temperature was 100 degrees C. At lower temperatures dissolution proceeded very slowly. At higher temperatures, rapid depolymerization of silk fibroin occurred. The value of the Flory-Huggins interaction parameter chi for the MMNO-H2O-silk fibroin system was -8.5, suggesting that dissolution is a thermodynamically favored process. The extent of degradation of silk fibroin was assessed by measuring the intrinsic viscosity and determining the amino acid composition of silk after regeneration with an aqueous methanol solution, which was effective in removing the solvent and coagulating silk. Regenerated silk fibroin membranes were characterized by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The prevailing molecular conformation of silk fibroin chains was the beta-sheet structure, as shown by the intense amide I-III bands at 1704, 1627, 1515, 1260, and 1230 cm(-1). The value of the I1260/I1230 intensity ratio (crystallinity index) was 0.68, comparable to that of the fibers. The DSC thermogram was characteristic of a silk fibroin material with unoriented beta-sheet crystalline structure, with an intense decomposition endotherm at 294 degrees C. The SEM examination of fractured surfaces showed the presence of a dense microstructure with a very fine texture formed by densely packed roundish particles of about 100-200 nm diameter.     

Non-bioengineered silk gland fibroin protein: characterization and evaluation of matrices for potential tissue engineering applications

The possibility of using wild non-mulberry silk protein as a biopolymer remains unexplored compared to domesticated mulberry silk protein. One of the main reasons for this was for not having any suitable method of extraction of silk protein fibroin from cocoons and silk glands. In this study non-bioengineered non-mulberry silk gland fibroin protein from tropical tasar silkworm Antheraea mylitta, is regenerated and characterized using 1% (w/v) sodium dodecyl sulfate (SDS). The new technique is important and unique because it uses a mild surfactant for fibroin dissolution and is advantageous over other previous reported techniques using chaotropic salts. Fabricated fibroin films are smooth as confirmed by atomic force microscopy. Circular dichroism spectrometry along with Fourier transformed infrared spectroscopy and X-ray diffraction reveal random coil/alpha-helix conformations in regenerated fibroin which transform to beta-sheets, resulting in crystalline structure and protein insolubility through ethanol treatment. Differential scanning calorimetry shows an increase in glass transition (Tg) temperature and enhanced degradation temperature on alcohol treatment. Enhanced cell attachment and viability of AH927 feline fibroblasts were observed on fibroin matrices. Higher mechanical strength along with controllable water stability of regenerated gland fibroin films make non-mulberry Indian tropical tasar silk gland fibroin protein a promising biomaterial for tissue engineering applications.     

A study on the flow stability of regenerated silk fibroin aqueous solution

The flow stability of silk fibroin (SF) aqueous solutions with different concentrations under different temperatures was investigated. It was found that the flow stability decreased quickly with the increase of solution concentration and temperature. X-ray diffraction, Fourier transform infrared (FTIR) and Raman spectroscopy analysis showed that silk fibroin in aqueous solution was mainly in random coil and alpha-helix conformation. However, it turned into alpha-helix and beta-sheet conformation after gelation, and both silk I and silk II crystalline structures appeared accordingly. The investigation implies that the original dilute regenerated SF aqueous solution should be stored under low temperature and concentrated just before spinning.     

Hydroxyapatite/regenerated silk fibroin scaffold-enhanced osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells

A novel hydroxyapatite/regenerated silk fibroin scaffold was prepared and investigated for its potential to enhance both osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells in vitro. Approx. 12.4 ± 0.06 % (w/w) hydroxyapatite was deposited onto the scaffold, and cell viability and DNA content were significantly increased (18.5 ± 0.6 and 33 ± 1.2 %, respectively) compared with the hydroxyapatite scaffold after 14 days. Furthermore, alkaline phosphatase activity in the novel scaffold increased 41 ± 2.5 % after 14 days compared with the hydroxyapatite scaffold. The data indicate that this novel hydroxyapatite/regenerated silk fibroin scaffold has a positive effect on osteoinductivity and osteoconductivity, and may be useful for bone tissue engineering.     

固定化过氧化物酶丝素膜的制备及其性质

家蚕丝素经高浓度的中性盐氯化钙溶解后,制成了固定化过氧化物酶丝素膜,对这种酶膜的活性和理化特性作了分析,结果表明这种酶膜的活性高,酶促反应温度范围宽,最适pH5.0-7.0,热稳定性也较游离酶好,这与用溴化锂溶解丝素后制成的固定化过氧化物酶膜相仿.因此,用这种方法制成的丝素膜同样是一种良好的固定化酶的生物材料.     

Biomimetic nanofibrous scaffolds: preparation and characterization of chitin/silk fibroin blend nanofibers

Electrospinning of chitin/silk fibroin (SF) blend solutions in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) was investigated to fabricate a biomimetic nanostructured scaffolds for tissue engineering. The morphology of the electrospun chitin/SF blend nanofibers was investigated with a field emission scanning electron microscope (FE-SEM). The average diameters of chitin/SF blend fibers decreased from 920 to 340 nm, with the increase of chitin content in blend compositions. The miscibility of chitin/SF blend fibers was examined by solution viscosity measurement. The chitin and SF were immiscible in the as-spun nanofibrous structure. The dimensional stability of chitin/SF blend nanofibers, with or without water vapor after-treatment, was conducted by immersing in water. As-spun SF-rich blend nanofibrous matrices were lost their fibrous structure after the water immersion for 24 h, and then changed into membrane-like structure. On the contrary, nanofibrous structures of water vapor-treated SF-rich blends were almost maintained. To assay the cytocompatibility and cell behavior on the chitin/SF blend nanofibrous scaffolds, cell attachment and spreading of normal human epidermal keratinocyte and fibroblasts seeded on the scaffolds were studied. Our results indicate that chitin/SF blend nanofibrous matrix, particularly the one that contained 75% chitin and 25% SF, could be a potential candidate for tissue engineering scaffolds because it has both biomimetic three-dimensional structure and an excellent cell attachment and spreading for NHEK and NHEF.     

Effect of shearing on formation of silk fibers from regenerated Bombyx mori silk fibroin aqueous solution

In this paper, the spinnable regenerated silk fibroin aqueous solution with high concentration was prepared and the regenerated silk fibers were obtained from the aqueous solution by two different spinning processes at ambient temperature. The orientation of these fibers was characterized by polarizing microscope. Their secondary structure was investigated by Raman spectroscopy and related mechanical properties were also measured. These data showed that shearing is an important step for increasing orientation and silk II (β-sheet) structure, and the mechanical properties of the regenerated silk fibers can also be improved by shearing.     

Wet spinning of silk polymer. II. Effect of drawing on the structural characteristics and properties of filament

Regenerated silk fibroin (SF) filaments were prepared by the wet spinning technique. The rheological behavior of the SF dope solution prepared with formic acid was examined and the drawing effect on the structural characteristics and mechanical properties of SF filament was comparatively studied with those of natural silk fiber. SF dope exhibited shear thinning, but, as the dope concentration increased, the effect of shear thinning decreased, an indication that a higher concentration of dope solution will result in good spinnability. Wet-spun SF filaments exhibited a uniform and circular cross-sectional shape and dense morphology under SEM observation. X-ray diffraction (XRD) results revealed that the crystallinity of wet-spun regenerated filaments was hardly affected by the draw ratio, whereas the crystalline and amorphous orientation of regenerated SF filament showed different features depending on the drawing. The crystalline orientation of regenerated filaments increased with an increase of draw ratio and was lower than that of natural silk fiber. On the contrary, the amorphous orientation was constant throughout 1X-5X draw ratios, after an abrupt increase at 1X, and was higher than that of natural silk fiber. These differences in the orientation behaviors are attributed to the different spinning mechanisms involved. The tensile property was strongly dependent on the draw ratio. The breaking strength and elongation of the regenerated filament at 5X draw ratio were 2.2 g/day and 17%, respectively.     

A novel method for dissolution and stabilization of non-mulberry silk gland protein fibroin using anionic surfactant sodium dodecyl sulfate

The importance of silk protein has increased because of its potential use as a natural biopolymer for tissue engineering and biomedical applications. In this report we show a novel and ecofriendly method for dissolution of gland silk protein fibroin. Non-mulberry silk fibroin from mature fifth instar larvae of Antheraea mylitta was found to be optimally soluble in 1% (w/v) anionic surfactant sodium dodecyl sulfate (SDS). Regenerated fibroin showed distinct bands of approximately 395 and 197 kDa on electrophoresis in non-reducing and reducing conditions, respectively. Enhanced fibroin dissolution via internalization of hydrophobic amino groups inside a hydrophilic amino acid core in the form of micelles was observed. Prolonged storage stability without gelation of SDS-extracted fibroin was seen. Atomic force microscopy showed micellar aggregation with mean micellar aggregation size of 8 nm. Circular dichroism spectroscopy revealed predominantly helical conformation due to surfactant addition with internal protein conformational changes as revealed by fluorescence spectroscopic studies.     

Effect of chitin/silk fibroin nanofibrous bicomponent structures on interaction with human epidermal keratinocytes

To fabricate a biomimetic nanostructured bicomponent scaffolds, two types of chitin/silk fibroin (SF) nanofibrous scaffolds (blend scaffolds and hybrid scaffolds) were prepared by electrospinning or simultaneous electrospinning of chitin/SF solutions. The chitin/SF bicomponent scaffolds were after-treated with water vapor, and their nanofibrous structures were almost maintained. From the cytocompatibility and cell behavior on the chitin/SF blend or hybrid nanofibrous scaffolds, the hybrid matrix with 25% chitin and 75% SF as well as the chitin/SF blend nanofibers could be a potential candidate for tissue engineering scaffolds.     

Compliant film of regenerated Antheraea pernyi silk fibroin by chemical crosslinking

A compliant film was prepared by chemical crosslinking of fibroin from silk fiber of wild silkworm, Antheraea pernyi. The silk fiber was dissolved in concentrated aqueous lithium thiocyanate and desalinated by dialysis. The film was cast from the regenerated aqueous solution, and crosslinked by polyethylene glycol diglycidyl ether (PEG-DE). This film showed high water resistively while maintaining random coil and -helix structure, unlike films prepared by organic solvent treatment that causes β-sheet formation. The films containing about 20 wt.% crosslinker were remarkably compliant and tenacious. These features, combined with the living-cell affinity of the wild silkworm fibroin, are expected to be useful in biomedical applications.     

Structure and properties of silk hydrogels

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.     

Silk fibroin model,poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-seryglycine)

l-Alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine and its pentachlorophenyl ester methanesulphonate have been synthesized as monomers for the preparation of silk fibroin model polypeptide. The former octapeptide was polymerized with diphenylphosphorylazide (DPPA) and triethylamine in DMSO or in HMPA—pyridine, and the latter octapeptide pentachlorophenylester was polymerized by adding triethylamine in DMSO to give poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine). This sequential polypeptide gave a similar i.r. pattern to the crystalline part of Bombyx mori silk fibroin, which indicated antiparallel β-conformation. Dialysis of the solution of this polymer in 60%, aqueous LiBr against water gave mainly the polymer of α-form. O.r.d. measurements suggest that this polypeptide exists as a random structure in dichloroacetic acid on in 60% aqueous LiBr.     

Wet spinning of Bombyx mori silk fibroin dissolved in N-methyl morpholine N-oxide and properties of regenerated fibres

Silk fibroin (SF) was dissolved in N-methyl morpholine N-oxide (NMMO) at a polymer concentration of 13% (w/w); thermal and rheological solution properties were characterized. The melting/crystallization behaviour of NMMO was influenced by SF presence. Melting of NMMO hydrate decreased to 71 degrees C and a cold crystallization peak appeared at 35 degrees C on heating. None crystallization occurred on cooling. Quenching at a temperature of 50 degrees C or higher did not induce any crystallization on heating. Viscosity of SF-NMMO solutions decreased as a function of temperature. At 75 degrees C, viscosity remained constant for 360 min. SF-NMMO dope was spun by using a lab-scale wet spinning line. The extruded filament was coagulated in an ethanol bath. Regenerated SF fibres were collected at different draw ratios and their morphological, physical, and mechanical properties were characterized. Fibre diameters ranged from 133 to 19mum, cross-section was regularly circular, and surface was generally smooth, with a very fine granular aspect. Birefringence increased with increasing the draw ratio, especially when take up and post-spinning draw were coupled. FT-IR spectra and DSC thermograms confirmed that SF fibres crystallized into Silk II structure. The IR crystallinity index did not change as a function of drawing. Regenerated SF fibres undrawn or drawn only during the coagulation step showed the mechanical behaviour typical of a brittle material. However, when both take up and post-spinning draw were applied, fibres displayed a ductile-stable behaviour. Typical values of the mechanical parameters of regenerated SF fibres were: E=8.7 GPa, sigma(b)=120 MPa and epsilon(b)=35%.     

The role of irregular unit,GAAS, on the secondary structure of Bombyx mori silk fibroin studied with 13C CP/MAS NMR and wide-angle X-ray scattering

Bombyx mori silk fibroin is a fibrous protein whose fiber is extremely strong and tough, although it is produced by the silkworm at room temperature and from an aqueous solution. The primary structure is mainly Ala-Gly alternative copolypeptide, but Gly-Ala-Ala-Ser units appear frequently and periodically. Thus, this study aims at elucidating the role of such Gly-Ala-Ala-Ser units on the secondary structure. The sequential model peptides containing Gly-Ala-Ala-Ser units selected from the primary structure of B. mori silk fibroin were synthesized, and their secondary structure was studied with (13)C CP/MAS NMR and wide-angle X-ray scattering. The (13)C isotope labeling of the peptides and the (13)C conformation-dependent chemical shifts were used for the purpose. The Ala-Ala units take antiparallel beta-sheet structure locally, and the introduction of one Ala-Ala unit in (Ala-Gly)(15) chain promotes dramatical structural changes from silk I (repeated beta-turn type II structure) to silk II (antiparallel beta-sheet structure). Thus, the presence of Ala-Ala units in B. mori silk fibroin chain will be one of the inducing factors of the structural transition for silk fiber formation. The role of Tyr residue in the peptide chain was also studied and clarified to induce "locally nonordered structure."     

Surface Modification and Characterisation of Silk Fibroin Fabric Produced by the Layer-by-Layer Self-Assembly of Multilayer Alginate/Regenerated Silk Fibroin

Silk-based medical products have a long history of use as a material for surgical sutures because of their desirable mechanical properties. However, silk fibroin fabric has been reported to be haemolytic when in direct contact with blood. The layer-by-layer self-assembly technique provides a method for surface modification to improve the biocompatibility of silk fibroin fabrics. Regenerated silk fibroin and alginate, which have excellent biocompatibility and low immunogenicity, are outstanding candidates for polyelectrolyte deposition. In this study, silk fabric was degummed and positively charged to create a silk fibroin fabric that could undergo self-assembly. The multilayer self-assembly of the silk fibroin fabric was achieved by alternating the polyelectrolyte deposition of a negatively charged alginate solution (pH = 8) and a positively charged regenerated silk fibroin solution (pH = 2). Finally, the negatively charged regenerated silk fibroin solution (pH = 8) was used to assemble the outermost layer of the fabric so that the surface would be negatively charged. A stable structural transition was induced using 75% ethanol. The thickness and morphology were characterised using atomic force microscopy. The properties of the self-assembled silk fibroin fabric, such as the bursting strength, thermal stability and flushing stability, indicated that the fabric was stable. In addition, the cytocompatibility and haemocompatibility of the self-assembled silk fibroin fabrics were evaluated. The results indicated that the biocompatibility of the self-assembled multilayers was acceptable and that it improved markedly. In particular, after the self-assembly, the fabric was able to prevent platelet adhesion. Furthermore, other non-haemolytic biomaterials can be created through self-assembly of more than 1.5 bilayers, and we propose that self-assembled silk fibroin fabric may be an attractive candidate for anticoagulation applications and for promoting endothelial cell adhesion for vascular prostheses.     

丝素蛋白/羟基磷灰石复合物对磷酸钙骨水泥性能的影响

目的：磷酸钙骨水泥（Calcium phosphate cement,CPC）以其诸多优点正得到了越来越多的应用,但其较差的力学性能表现也限制了它的使用范围。本研究目的在于改善磷酸钙骨水泥的力学性能,同时评估改性后的磷酸钙骨水泥的其他性能。方法：通过丝素蛋白（Silk fibroin,SF）的矿化自组装方法制备丝素蛋白／羟基磷灰石复合物（silk fibroin/hydroxyapitite composite, SF/HA）。按照1％、2％、3％、4％的质量分数加入磷酸钙骨水泥中,与磷酸钙骨水泥组对比。比较内容包括力学强度、抗渍散性能及细胞毒性。结果：以丝素蛋白溶液为液相组的磷酸钙骨水泥强度大约为35MPa。随后随着添加丝素蛋白／羟基磷灰石复合物的质量分数从1％增至3％,磷酸钙骨水泥的强度逐渐增加（P〈0．05）,最高约至45MPa。而当丝素蛋白／羟基磷灰石的质量分数达到4％时,磷酸钙骨水泥的强度较质量分数3％组小幅度下降至43MPa（P〈0．05）。以丝素蛋白溶液作为液相时,磷酸钙骨水泥的抗溃散能力也得到了加强。在MTT法测定细胞活力的对照实验中,无论是加入丝素蛋白溶液或丝素蛋白／羟基磷灰石复合物,都未观察到细胞毒性。结论：在磷酸钙骨水泥中加入3％质量分数的丝素蛋白／羟基磷灰石复合物,能显著提高磷酸钙骨水泥的抗压强度。而丝素蛋白溶液作为液相可改善磷酸钙骨水泥的抗溃散能力。同时,丝素蛋白和丝素蛋白／羟基磷灰石复合物都不表现出细胞毒性。更理想的力学强度和更强的抗溃散能力,大大扩展了磷酸钙骨水泥的应用范围。     

Silk I structure in Bombyx mori silk foams.

Single crystals of Bombyx mori silk fibroin in the metastable silk I polymorph have been produced using a new foaming technique. Foams of silk protein are generated by bubbling pure nitrogen gas through an aqueous solution of regenerated silk fibroin. The foamed material is collected, dried, and then sonicated to yield individual crystals which were examined using transmission electron microscopy and electron diffraction. It is found that slightly acidic conditions in the solution from which the foam was generated favor the formation of silk II while neutral to slightly basic solutions favor silk I formation. More dilute solutions favor the formation of silk II while more concentrated solutions (about 7 wt.% or greater) favor the formation of silk I. X-ray powder diffraction patterns from the dried silk I foams displayed features highly indicative of silk I. We also report the first single crystal electron diffraction patterns of silk I. These patterns indicate a large unit cell, possibly 22.66 x 5.70 x 20.82 A. with six chains of six residues, Gly-Ala-Gly-Ala-Gly-Ser. Although we have not fully characterized this complex structure it appears that the chain is nearly fully extended and thus our data is consistent with models possessing general features similar to those proposed by Fossey SA, Nemethy G, Gibson KD, Scheraga HA. (Biopolymers 1991;31:1529-1541).     

Preparation and physico-chemical characterization of chitin and chitosan from the pens of the squid species, Loligo lessoniana and Loligo formosana

β-chitin and its chitosan from the pens of Loligo lessoniana and Loligo formosana has been isolated, prepared, and physico-chemically characterized to demonstrate a potential chitin source. Without deminerization due to negligible ash content, only deproteinization was used in the chitin isolation with an yield of 35–38%, without significant difference either between the two species or the collection seasons. Reducing step not only saves production cost but also obviates acid pollutant. Mild alkaline deacetylation with various time periods was employed in the chitosan preparation. Optical rotation and thermal transition of chitin from both species suggested the weak intermolecular forces compared with shrimp chitin. The results of nitrogen contents indicate the effectiveness of the deproteinization method used. The samples were categorized as a Class III: moderate hygroscopicity. Traces of elements presented in pens markedly decreases but are incapable to be got rid of within the step of chitin–chitosan preparation. In addition, a small amount of cadmium, as the contamination, was detected in the samples from L. formosana.