Cloning and characterization of the gene encoding endo-beta-1,3-glucanase from Arthrobacter sp. NHB-10

The gluA gene, encoding an endo-beta-1,3-glucanase from Arthrobacter sp. (strain NHB-10), was cloned and analyzed. The deduced endo-beta-1,3-glucanase amino acid sequence was 750 amino acids long and contained a 42 amino acid signal peptide with a mature protein of 708 amino acids. There was no similarity to known endo-beta-1,3-glucanases, but GluA was partially similar to two fungal exo-beta-1,3-glucanases in glycoside hydrolase (GH) family 55. Of five possible residues for catalysis and two motifs in two beta-helix heads of GH family 55, three residues and one motif were conserved in GluA, suggesting that GluA is the first bacterial endo-beta-1,3-glucanase in GH family 55. Significant similarity was also found to two proteins of unknown function from Streptomyces coelicolor A3(2) and S. avermitilis.     

Identification of a common hyaluronan binding motif in the hyaluronan binding proteins RHAMM, CD44 and link protein.

We have previously identified two hyaluronan (HA) binding domains in the HA receptor, RHAMM, that occur near the carboxyl-terminus of this protein. We show here that these two HA binding domains are the only HA binding regions in RHAMM, and that they contribute approximately equally to the HA binding ability of this receptor. Mutation of domain II using recombinant polypeptides of RHAMM demonstrates that K423 and R431, spaced seven amino acids apart, are critical for HA binding activity. Domain I contains two sets of two basic amino acids, each spaced seven residues apart, and mutation of these basic amino acids reduced their binding to HA--Sepharose. These results predict that two basic amino acids flanking a seven amino acid stretch [hereafter called B(X7)B] are minimally required for HA binding activity. To assess whether this motif predicts HA binding in the intact RHAMM protein, we mutated all basic amino acids in domains I and II that form part of these motifs using site-directed mutagenesis and prepared fusion protein from the mutated cDNA. The altered RHAMM protein did not bind HA, confirming that the basic amino acids and their spacing are critical for binding. A specific requirement for arginine or lysine residues was identified since mutation of K430, R431 and K432 to histidine residues abolished binding. Clustering of basic amino acids either within or at either end of the motif enhanced HA binding activity while the occurrence of acidic residues between the basic amino acids reduced binding. The B(X7)B motif, in which B is either R or K and X7 contains no acidic residues and at least one basic amino acid, was found in all HA binding proteins molecularly characterized to date. Recombinant techniques were used to generate chimeric proteins containing either the B(X7)B motifs present in CD44 or link protein, with the amino-terminus of RHAMM (amino acids 1-238) that does not bind HA. All chimeric proteins containing the motif bound HA in transblot analyses. Site-directed mutations of these motifs in CD44 sequences abolished HA binding. Collectively, these results predict that the motif of B(X7)B as a minimal binding requirement for HA in RHAMM, CD44 and link protein, and occurs in all HA binding proteins described to date.     

De novo tubular nanostructure design based on self-assembly of beta-helical protein motifs

We present an approach for designing self-assembled nanostructures from naturally occurring building block segments obtained from native protein structures. We focus on structural motifs from left-handed beta-helical proteins. We selected 17 motifs. Copies of each of the motifs are stacked one atop the other. The obtained structures were simulated for long periods by using Molecular Dynamics to test their ability to retain their organization over time. We observed that a structural model based on the self-assembly of a motif from E. coli galactoside acetyltransferase produced a very stable tube. We studied the interactions that help maintain the conformational stability of the systems, focusing on the role of specific amino acids at specific positions. Analysis of these systems and a mutational study of selected candidates revealed that the presence of proline and glycine residues in the loops of beta-helical structures greatly enhances the structural stability of the systems.     

Buried hydrophobic side-chains essential for the folding of the parallel beta-helix domains of the P22 tailspike

The processive beta-strands and turns of a polypeptide parallel beta-helix represent one of the topologically simplest beta-sheet folds. The three subunits of the tailspike adhesin of phage P22 each contain 13 rungs of a parallel beta-helix followed by an interdigitated section of triple-stranded beta-helix. Long stacks of hydrophobic residues dominate the elongated buried core of these two beta-helix domains and extend into the core of the contiguous triple beta-prism domain. To test whether these side-chain stacks represent essential residues for driving the chain into the correct fold, each of three stacked phenylalanine residues within the buried core were substituted with less bulky amino acids. The mutant chains with alanine in place of phenylalanine were defective in intracellular folding. The chains accumulated exclusively in the aggregated inclusion body state regardless of temperature of folding. These severe folding defects indicate that the stacked phenylalanine residues are essential for correct parallel beta-helix folding. Replacement of the same phenylalanine residues with valine or leucine also impaired folding in vivo, but with less severity. Mutants were also constructed in a second buried stack that extends into the intertwined triple-stranded beta-helix and contiguous beta-prism regions of the protein. These mutants exhibited severe defects in later stages of chain folding or assembly, accumulating as misfolded but soluble multimeric species. The results indicate that the formation of the buried hydrophobic stacks is critical for the correct folding of the parallel beta-helix, triple-stranded beta-helix, and beta-prism domains in the tailspike protein.     

Dynamic Rearrangement Within the Antheraea pernyi Silk Fibroin Gene Is Associated with Four Types of Repetitive Units

We characterized a full-length gene encoding wild silkmoth Antheraea pernyi fibroin (Ap-fibroin) to clarify the conformation of repetitive sequences. The gene consisted of a first exon encoding 14 amino acid residues, a short intron (120 bp), and a long second exon encoding 2,625 amino acid residues. Three amino acids, alanine, glycine, and serine, amounted to 81% of the Ap-fibroin sequence. The Ap-fibroin, except for 155 residues of the amino terminus, was composed of 80 tandemly arranged polyalanine-containing units (motifs). A motif was a doublet of a polyalanine block (PAB) and a nonpolyalanine block (NPAB). Seventy-eight of the 80 motifs were classified into four types based on differences in the NPAB sequences. Although respective motifs were significantly conserved, many rearrangements were observed within the second exon, i.e., the triplication of a 558-bp-long sequence and other duplication events of shorter sequences. Chi-like sequences, GCTGGAG, might contribute to the rearrangement within the gene as described in human minisatellite loci, because they were found at specific sites of NPAB-encoding sequences in three of four types of motifs. The present results support the idea that the Ap-fibroin gene is unstable like minisatellite sequences and that the evolution of this gene is strongly associated with its instability. Received: 18 February 2000 / Accepted: 30 June 2000     

Stability of tubular structures based on beta-helical proteins: self-assembled versus polymerized nanoconstructs and wild-type versus mutated sequences

In this work we used atomistic molecular dynamics simulations to examine different aspects of tubular nanostructures constructed using protein building blocks with a beta-helical conformation. Initially, we considered two different natural protein building blocks, which were extracted from the protein data base, to compare the relative stabilities of the nanotubes obtained made of self-assembled and covalently linked repeats. Results show nanotubes constructed by linking building blocks through covalent bonds are very stable suggesting that the basic principles of polymer physics are valid when the repeating units are made of large fragments of proteins. In contrast, the stability of self-assembled nanostructures strongly depends on the attractive nonbonding interactions associated to building blocks aligned in a complementary manner. On the other hand, we investigated the ability of a conformationally constrained synthetic amino acid to enhance the stability of both self-assembled and polymerized nanotubes when it is used to substitute natural residues. Specifically, we considered 1-aminocyclopentane-1-caboxylic acid, which involves strong stereochemical constraints produced by the cyclopentane side chain. We found that the incorporation of this amino acid within the more flexible regions of the beta-helical building blocks is an excellent strategy to enhance the stability of the nanotubes. Thus, when a single mutation is performed in the loop region of the beta-helix, the bend architecture of the whole loop is stabilized since the conformational mobility is reduced not only at the mutated position but also at the adjacent positions.     

Cloning and Characterization of the Gene Encoding Endo-β-1,3-glucanase from Arthrobacter sp. NHB-10

The gluA gene, encoding an endo-β-1,3-glucanase from Arthrobacter sp. (strain NHB-10), was cloned and analyzed. The deduced endo-β-1,3-glucanase amino acid sequence was 750 amino acids long and contained a 42 amino acid signal peptide with a mature protein of 708 amino acids. There was no similarity to known endo-β-1,3-glucanases, but GluA was partially similar to two fungal exo-β-1,3-glucanases in glycoside hydrolase (GH) family 55. Of five possible residues for catalysis and two motifs in two β-helix heads of GH family 55, three residues and one motif were conserved in GluA, suggesting that GluA is the first bacterial endo-β-1,3-glucanase in GH family 55. Significant similarity was also found to two proteins of unknown function from Streptomyces coelicolor A3(2) and S. avermitilis.     

Low molecular weight peptide inhibitors of medullasin: purification and structure

Two low molecular weight peptide inhibitors of medullasin were isolated from human bone marrow cells. Determination of their amino acid composition and amino acid sequence revealed that one inhibitor was composed of 36 amino acid residues and the other 34 amino acid residues which are identical with the C-terminal portions (Formula; see text) of the beta-chain of human hemoglobin. These two peptides when synthesized also showed the same degree of inhibitory effect on medullasin activity as the natural products. Neither the N-terminal portion of the inhibitor, composed of 21 amino residues, nor the C-terminal peptide, composed of 20 amino acids, inhibited medullasin activity. Medullasin was inhibited reversibly and non-competitively against by these inhibitors and was the most effectively inhibited serine protease among several tested.     

毛白杨PtFT1和PtFT2基因编码区克隆与表达模式分析

以毛白杨为材料,采用同源基因克隆法从毛白杨中分离了FT(FLOWERING LOCUS T)同源基因PtFT1和PtFT2编码区序列。测序结果表明PtFT1和PtFT2 编码区长度均为525bp,可编码174个氨基酸。蛋白序列比对发现这两个基因与拟南芥、葡萄等物种中FT同源基因所编码的氨基酸同源性达到75%以上, PtFT1 和 PtFT2 所推测的氨基酸序列包含FT类蛋白保守基序(LGRQTVYAPGWRQN)和两个关键性氨基酸残基Tyr84(Y),Gln139(Q)。系统进化分析进一步表明 PtFT1 和 PtFT2 属于FT亚家族成员。采用Real-time qRT-PCR技术检测 PtFT1 和 PtFT2 在各个组织部位中的表达模式,结果表明 PtFT1 和 PtFT2 在各个组织部位均有表达,但这两个基因的表达水平存在差异;两个基因在早期雌雄花芽(7月5日)表达量明显高于成熟雌雄花芽(翌年3月10日)表达量,进而推测在毛白杨中 PtFT1 和 PtFT2 的表达响应日照长短,长日照条件促进这两个基因的表达,它们可能在光周期调控的开花途径中促进花芽分化和开花发挥特定作用。这些研究对于阐明 PtFT1 和 PtFT2 在光周期开花调控途径中的作用机制具有重要意义,为进一步开展毛白杨开花调控基因工程研究奠定了工作基础。     

Single amino acid supplementation in aminoacidopathies: a systematic review

Aminoacidopathies are a group of rare and diverse disorders, caused by the deficiency of an enzyme or transporter involved in amino acid metabolism. For most aminoacidopathies, dietary management is the mainstay of treatment. Such treatment includes severe natural protein restriction, combined with protein substitution with all amino acids except the amino acids prior to the metabolic block and enriched with the amino acid that has become essential by the enzymatic defect. For some aminoacidopathies, supplementation of one or two amino acids, that have not become essential by the enzymatic defect, has been suggested. This so-called single amino acid supplementation can serve different treatment objectives, but evidence is limited. The aim of the present article is to provide a systematic review on the reasons for applications of single amino acid supplementation in aminoacidopathies treated with natural protein restriction and synthetic amino acid mixtures.     

Nanostructure design using protein building blocks enhanced by conformationally constrained synthetic residues

Increasing efforts are being invested in the construction of nanostructures with desired shapes and physical and chemical properties. Our strategy involves nanostructure design using naturally occurring protein building blocks. Inspection of the protein structural database (PDB) reveals the richness of the conformations, shapes, and chemistries of proteins and their building blocks. To increase the population of the native fold in the selected building block, we mutate natural residues by engineered, constrained residues that restrict the conformational freedom at the targeted site and have favorable interactions, geometry, and size. Here, as a model system, we construct nanotubes using building blocks from left-handed beta-helices which are commonly occurring repeat protein architectures. We pick two-turn beta-helical segments, duplicate and stack them, and using all-atom molecular dynamics simulations (MD) with explicit solvent probe the structural stability of these nanotubular structures as indicated by their capacity to retain the initial organization and their conformational dynamics. Comparison of the results for the wild-type and mutated sequences shows that the introduction of the conformationally restricted 1-aminocyclopropanecarboxylic acid (Ac3c) residue in loop regions greatly enhances the stability of beta-helix nanotubes. The Ac3c geometrical confinement effect is sequence-specific and position-specific. The achievement of high stability of nanotubular structures originates not only from the reduction of mobility at the mutation site induced by Ac3c but also from stabilizing association forces between building blocks such as hydrogen bonds and hydrophobic contacts. For the selected synthetic residue, similar size, hydrophobicity, and backbone conformational tendencies are desirable as in the Ac3c.     

ER Export of KAT1 is Correlated to the Number of Acidic Residues within a Triacidic Motif

For a number of ion channels, including the potassium (K⁺) inward rectifying channel from Arabidopsis thaliana (KAT1), diacidic endoplasmic reticulum (ER) export motifs have been identified. These motifs consist of two acidic amino acids (aspartate (D) and/or glutamate (E)) separated by any amino acid. To specify the role of single acidic amino acids for efficiency of ER export, we analysed a sequence of KAT1 that included the originally identified diacidic ER export motif (DxE) plus an additional D just upstream of the diacidic motif. Analysis of single, double and triple mutations of the acidic amino acids of the DxDxE motif revealed a gradual reduction of ER export depending on the number of mutated acidic residues. The amount of reduction in ER export was not related to the position, but only to the number of mutated acidic amino acids. These results show that a triacidic motif is essential for efficient ER export of KAT1. Function of the triacidic motif probably involves cooperative binding to Sec24.     

Contribution of individual amino acids within MHC molecule or antigenic peptide to TCR ligand potency

The TCR recognition of peptides bound to MHC class II molecules is highly flexible in some T cells. Although progress has been made in understanding the interactions within the trimolecular complex, to what extent the individual components and their amino acid composition contribute to ligand recognition by individual T cells is not completely understood. We investigated how single amino acid residues influence Ag recognition of T cells by combining several experimental approaches. We defined TCR motifs for CD4+ T cells using peptide synthetic combinatorial libraries in the positional scanning format (PS-SCL) and single amino acid-modified peptide analogues. The similarity of the TCR motifs defined by both methods and the identification of stimulatory antigenic peptides by the PS-SCL approach argue for a contribution of each amino acid residue to the overall potency of the antigenic peptide ligand. In some instances, however, motifs are formed by adjacent amino acids, and their combined influence is superimposed on the overall contribution of each amino acid within the peptide epitope. In contrast to the flexibility of the TCR to interact with different peptides, recognition was very sensitive toward modifications of the MHC-restriction element. Exchanges of just one amino acid of the MHC molecule drastically reduced the number of peptides recognized. The results indicate that a specific MHC molecule not only selects certain peptides, but also is crucial for setting an affinity threshold for TCR recognition, which determines the flexibility in peptide recognition for a given TCR.     

A reduced amino acid alphabet for understanding and designing protein adaptation to mutation

Protein sequence world is considerably larger than structure world. In consequence, numerous non-related sequences may adopt similar 3D folds and different kinds of amino acids may thus be found in similar 3D structures. By grouping together the 20 amino acids into a smaller number of representative residues with similar features, sequence world simplification may be achieved. This clustering hence defines a reduced amino acid alphabet (reduced AAA). Numerous works have shown that protein 3D structures are composed of a limited number of building blocks, defining a structural alphabet. We previously identified such an alphabet composed of 16 representative structural motifs (5-residues length) called Protein Blocks (PBs). This alphabet permits to translate the structure (3D) in sequence of PBs (1D). Based on these two concepts, reduced AAA and PBs, we analyzed the distributions of the different kinds of amino acids and their equivalences in the structural context. Different reduced sets were considered. Recurrent amino acid associations were found in all the local structures while other were specific of some local structures (PBs) (e.g Cysteine, Histidine, Threonine and Serine for the alpha-helix Ncap). Some similar associations are found in other reduced AAAs, e.g Ile with Val, or hydrophobic aromatic residues Trp with Phe and Tyr. We put into evidence interesting alternative associations. This highlights the dependence on the information considered (sequence or structure). This approach, equivalent to a substitution matrix, could be useful for designing protein sequence with different features (for instance adaptation to environment) while preserving mainly the 3D fold.     

Identification of the carboxyl-terminal amino acids important for the ADP-ribosylation activity of Pseudomonas exotoxin A

The ADP-ribosylation domain of Pseudomonas exotoxin A (PE) has been identified to reside in structural domain III (residues 405-613) and a portion of domain Ib (residues 385-404) of the molecule (Hwang, J., FitzGerald, D. J., Adhya, S., and Pastan, I. (1987) Cell 48, 129-136). To further determine the carboxyl end region essential for ADP-ribosylation activity, we constructed sequential deletions at the carboxyl-terminal of PE. Our results show that a clone with a deletion of the carboxyl-terminal amino acid residues from Arg-609 to Lys-613 and replaced with Arg-Asn retained wild-type PE ADP-ribosylation activity. Deletion of the terminal amino acid residues from Ala-596 to Lys-613 and replaced with Val-Ile-Asn reduced ADP-ribosylation activity by 75%, while deletions of 36 or more amino acids from the carboxyl terminus completely lose their ADP-ribosylation activity. These modified PEs were also examined for their ability to block PE cytotoxicity. Our results shown that modified PEs which lost their ADP-ribosylation activity correspondingly lost their cytotoxicity. Furthermore, extracts containing PE fragments without ADP-ribosylation activity were able to block the cytotoxic activity of intact PE. Our results thus indicate that carboxyl-terminal amino acids in the Ser-595 region are crucial for ADP-ribosylation activity and, consequently, cytotoxicity of PE. The modified PEs which have lost their ADP-ribosylation activity may also be a route to new PE vaccines.     

Ionic Interactions Promote Transmembrane Helix-Helix Association Depending on Sequence Context

Folding and oligomerization of integral membrane proteins frequently depend on specific interactions of transmembrane helices. Interacting amino acids of helix-helix interfaces may form complex motifs and exert different types of molecular forces. Here, a set of strongly self-interacting transmembrane domains (TMDs), as isolated from a combinatorial library, was found to contain basic and acidic residues, in combination with polar nonionizable amino acids and C-terminal GxxxG motifs. Mutational analyses of selected sequences and reconstruction of high-affinity interfaces confirmed the cooperation of these residues in homotypic interactions. Probing heterotypic interaction indicated the presence of interhelical charge-charge interactions. Furthermore, simple motifs of an ionizable residue and GxxxG are significantly overrepresented in natural TMDs, and a specific combination of these motifs exhibits high-affinity heterotypic interaction. We conclude that intramembrane charge-charge interactions depend on sequence context. Moreover, they appear important for homotypic and heterotypic interactions of numerous natural TMDs.     

Kinking the coiled coil--negatively charged residues at the coiled-coil interface

The coiled coil is one of the most common protein-structure motifs. It is believed to be adopted by 3-5% of all amino acids in proteins. It comprises two or more alpha-helical chains wrapped around one another. The sequences of most coiled coils are characterized by a seven-residue (heptad) repeat, denoted (abcdefg)(n). Residues at the a and d positions define the helical interface (core) and are usually hydrophobic, though about 20% are polar or charged. We show that parallel coiled-coils have a unique pattern of their negatively charged residues at the core positions: aspartic acid is excluded from these positions while glutamic acid is not. In contrast the antiparallel structures are more permissive in their amino acid usage. We show further, and for the first time, that incorporation of Asp but not Glu into the a positions of a parallel coiled coil creates a flexible hinge and that the maximal hinge angle is being directly related to the number of incorporated mutations. These new computational and experimental observations will be of use in improving protein-structure predictions, and as rules to guide rational design of novel coiled-coil motifs and coiled coil-based materials.     

Occurrence of motifs with six amino acid residues in three eukaryotic proteomes

Now it is known that 18 neurological inherited diseases connected with mutations of multiple insertion of one amino acid residue in protein sequence. Therefore, studying the functional role of such simple motifs is an important task in biology. In this work we have investigated how often homorepeats, i.e. runs of a single amino acid residue, of 6 amino acid residues long as well as simple motifs consisting from two amino acid residues of 6 residues long situated in any position occur in three eukaryotic well studied proteomes: Homo sapiens, Drosophila melanogaster, Caenorhabditis elegans. It turns out that many simple motifs occur very often. The occurrence for each motif can be found at our site: http://antares.protres.ru/motifs_six_residues.html. One can suggest that such short similar motifs are responsible for the common functions for nongomologous, unrelated proteins from different organisms.     

The 4-oxalocrotonate tautomerase family of enzymes: how nature makes new enzymes using a beta-alpha-beta structural motif

4-Oxalocrotonate tautomerase (4-OT) catalyzes the isomerization of beta,gamma-unsaturated enones to their alpha,beta-isomers. The enzyme is part of a plasmid-encoded pathway, which enables bacteria harboring the plasmid to use various aromatic hydrocarbons as their sole sources of carbon and energy. Among isomerases and enzymes in general, 4-OT is unusual for two reasons: it has one of the smallest known monomer sizes (62 amino acids) and the amino-terminal proline functions as the catalytic base. In addition to Pro-1, three other residues (Arg-11, Arg-39, and Phe-50) have been identified as critical catalytic residues by kinetic analysis, site-directed mutagenesis, chemical synthesis, NMR, and crystallographic studies. Arginine-39 functions as the general acid catalyst (assisted by an ordered water molecule) in the reaction while Arg-11 plays a role in substrate binding and facilitates catalysis by acting as an electron sink. Finally, the hydrophobic nature of the active site, which lowers the pK(a) of Pro-1 to approximately 6.4 and provides a favorable environment for catalysis, is largely maintained by Phe-50. 4-OT is also the title enzyme of the 4-OT family of enzymes. The chromosomal homologues in this family are composed of monomers ranging in size from 61 to 79 amino acids, which code a beta-alpha-beta structural motif. The homologues all retain Pro-1 and generally have an aromatic or hydrophobic amino acid at the Phe-50 position. Characterization of representative members has uncovered mechanistic and structural diversity. A new activity, a trans-3-chloroacrylic acid dehalogenase, has been identified in addition to the previously known tautomerase and isomerase activities. Two new structures have also been found, along with the 4-OT hexamer. The dehalogenase functions as a heterohexamer while the Escherichia coli homologue, designated YdcE, functions as a dimer. Moreover, both 4-OT and the Bacillus subtilis homologue, designated YwhB, exhibit low-level dehalogenase activity. Amplification of this activity could have produced the full-fledged dehalogenase. The sum of these observations indicates that Nature uses the beta-alpha-beta structural motif as a building block in a variety of manners to create new enzymes.