A molecular delivery system by using AFM and nanoneedle

We developed a new low invasive cell manipulation and gene or molecule transfer system in a single living cell by using an atomic force microscope (AFM) and ultra thin needle, a nanoneedle. DNA was immobilized on the surface of the nanoneedle by covalent bonding and avidin-biotin affinity binding. Immobilization of DNA on the nanoneedle was confirmed by measuring the unbinding force between avidin and biotin. The DNA-immobilized nanoneedle was successfully inserted into HEK293 cells. Though TO-PRO-3 iodide staining experiments using confocal microscopy, we observed the immobilized DNA on the surface of the nanoneedle, which was retained after 10 times insertions to and evacuations from a living cell.     

Direct insertion of proteins into a living cell using an atomic force microscope with a nanoneedle

We have developed a tool for directly inserting proteins into living cells by using atomic force microscopy (AFM) and an ultrathin needle, termed a nanoneedle. The surface of the nanoneedle was modified with His-tagged proteins using nickel chelating nitrilotriaceticacid (NTA). The fluorescent proteins, DsRed2-His₆ and EGFP-His₆, could be attached to and detached from the surface of the nanoneedle. These results suggest that the Ni-NTA modified nanoneedle can successfully be used for specific delivery of proteins. The nanoneedle modified with DsRed2-His₆ was able to penetrate the surface of a living HeLa cell, as confirmed by laser scanning fluorescence microscopy and monitoring an exerting force on the nanoneedle using AFM. Force curves using the nanoneedle indicated that the needle was able to penetrate at displacement speeds of 0.10–10 μm/s. These results suggest that this technique can be used to directly insert proteins into living cells and is applicable for modulation or regulation of single cell activity.     

Nanoneedle Surface Modification with 2-Methacryloyloxyethyl Phosphorylcholine Polymer to Reduce Nonspecific Protein Adsorption in a Living Cell

Previously, we developed a new molecular delivery system to target single living cells by using atomic force microscope and ultrathin needle referred to as nanoneedle. This system delivers molecules into the cell by attaching them to the surface of nanoneedle. However, nonspecific protein adsorption on the nanoneedle surface inside the living cells limits the range of application of this system. In the present study, we focused on nonspecific protein adsorption onto the nanoneedle surface inside the cells and examined whether this protein adsorption was reduced by modifying the nanoneedle surface with a biocompatible phospholipid polymer containing 2-methacryloyloxyethyl phosphorylcholine (MPC) unit. MPC polymer coating of the surface of silicon wafer reduced nonspecific adsorption of proteins from liver extracts and prevented the formation of clot-like protein aggregates. MPC polymer also decreased nonspecific adsorption of cytosolic protein onto the nanoneedle surface inside the living cell. On the other hand, MPC polymer showed no effect on nonspecific mechanical interaction between nanoneedle and the cell components. Surface modification with MPC polymer is a useful technique to modify the surface properties of nanoneedle.     

Application of the fluorescence resonance energy transfer method for studying the dynamics of caspase-3 activation during UV-induced apoptosis in living HeLa cells

Activation of caspase-3 is a central event in apoptosis. We have developed a GFP-based FRET (fluorescence resonance energy transfer) probe that is highly sensitive to the activation of caspase-3 in intact living cells. This probe was constructed by fusing a CFP (cyan fluorescent protein) and a YFP (yellow fluorescent protein) with a specialized linker containing the caspase-3 cleavage sequence: DEVD. The linker design was optimized to produce a large FRET effect. Using purified protein, we observed a fivefold change in the fluorescence emission ratio when the probe was cleaved by caspase-3. To demonstrate the usefulness of this method, we introduced this FRET probe into HeLa cells by both transient and stable transfection. We observed that during UV-induced apoptosis, the activation of caspase-3 varied significantly between different cells; but once the caspase was activated, the enzyme within the cell became fully active within a few minutes. This technique will be highly useful for correlating the caspase-3 activation with other apoptotic events and for rapid-screening of potential drugs that may target the apoptotic process.     

A DNA intercalation-based electrochemical method for detection of Chlamydia trachomatis utilizing peroxidase-catalyzed signal amplification

A sensitive electrochemical DNA detection method for the diagnosis of sexually transmitted disease (STD) caused by Chlamydia trachomatis was developed. The method utilizes a DNA-intercalating agent and a peroxidase promoted enzymatic precipitation reaction and involves the following steps. After hybridization of the target C. trachomatis gene with an immobilized DNA capture probe on a gold electrode surface, the biotin-tagged DNA intercalator (anthraquinone) was inserted into the resulting DNA duplex. Subsequently, the polymeric streptavidin/peroxidase complex was applied to the biotin-decorated electrode. Peroxidase catalyzed 4-chloronaphthol to produce insoluble product, which is precipitated on the electrode surface in the presence of hydrogen peroxide. Cyclic voltammograms with the gold electrode exhibited a peak current of ferrocenemethanol in electrolyte, which decreased in a proportional way to increasing concentration of target DNA owing to insulation of electrode surface by the growing insoluble precipitate. Using this strategy, we were able to detect picomolar concentrations of C. trachomatis gene in a sample taken from a real patient.     

Application of Exchangeable Biochemical Reactors with Oxidase‐Catalase‐Co‐immobilizates and Immobilized Microorganisms in a Microfluidic Chip‐Calorimeter

Several methods for the quantitative detection of different compounds, e.g., L‐amino acids, sugars or alcohols in liquid media were developed by application of an automatic measuring unit including a fluid chip‐calorimeter FCC‐21. For this purpose, enzymes were immobilized covalently on the inner and outer surface of CPG (controlled porous glass)‐spherules with an outer diameter of 100 μm and filled into a micro flow‐through reaction chamber (V_R = 20 μL). The design of the measuring cell allows for easy insertion into the calorimeter device of a stored series of comfortably pre‐fabricated measuring cells. These cells can be filled with different enzyme immobilizates. Different oxidases were used and co‐immobilized with catalase for the improvement of the detection sensitivity. A signal amplification could be achieved up to a factor of 3.5 with this configuration. β‐D‐glucose, ethanol and L‐lysine could be detected in a range of 0.25–1.75 mM using glucose oxidase, alcohol oxidase and lysine oxidase. The group of oxidases in combination with the enzymatic catalysis of the intermediate H₂O₂ allows the quantitative detection of a large number of analytes. A good measurement and storage stability could be achieved for several weeks by this immobilization method. In addition to enzyme‐based detection reactions, it was shown that living microorganisms can be immobilized in the reaction chamber. Thus, the system can be used as a whole‐cell biosensor. The quantitative detection of phenol in the range of 10–100 μM could be performed using the actinomycete Rhodococcus sp. immobilized on glass beads by means of embedding into polymers.     

Detection of DNA hybridization and extension reactions by an extended-gate field-effect transistor: characterizations of immobilized DNA-probes and role of applying a superimposed high-frequency voltage onto a reference electrode

As we have already shown in a previous publication [Kamahori, M., Ihige, Y., Shimoda, M., 2007. Anal. Sci. 23, 75-79], an extended-gate field-effect transistor (FET) sensor with a gold electrode, on which both DNA probes and 6-hydroxyl-1-hexanethiol (6-HHT) molecules are immobilized, can detect DNA hybridization and extension reactions by applying a superimposed high-frequency voltage to a reference electrode. However, kinetic parameters such as the dissociation constant (K(d)(s)) and the apparent DNA-probe concentration (C(probe)(s)) on a surface were not clarified. In addition, the role of applying the superimposed high-frequency voltage was not considered in detail. In this study, the values of K(d)(s) and C(probe)(s) were estimated using a method involving single-base extension reaction combined with bioluminescence detection. The value of K(d)(s) on the surface was 0.38 microM, which was about six times that in a liquid phase. The value of C(probe)(s), which expressed the upper detection limit for the solid phase reaction, was 0.079 microM at a DNA-probe density of 2.6 x 10(12)molecules/cm(2). We found that applying the superimposed high-frequency voltage accelerated the DNA molecules to reach the gold surface. Also, the distance between the DNA-probes immobilized on the gold surface was controlled to be over 6 nm by applying a method of competitive reaction with DNA probes and 6-HHT molecules. This space was sufficient to enable the immobilized DNA-probes to lie down on the 6-HHT monolayer in the space between them. Thus, the FET sensor could detect DNA hybridization and extension reactions by applying a superimposed high-frequency voltage to the DNA-probes density-controlling gold surface.     

Detection of Clostridium botulinum toxin A using a fiber optic-based biosensor.

A rapid, sensitive, analytical method for the detection of Clostridium botulinum toxin has been developed. The fiber optic-based biosensor utilizes the evanescent wave of a tapered optical fiber for signal discrimination. A 50 mW argon-ion laser, which generates laser light at 514 nm, is used in conjunction with an optical fiber probe that is tapered at the distal end. Antibodies specific for C. botulinum are covalently attached to the surface of the tapered fiber. The principle of the system is a sandwich immunoassay using rhodamine-labeled polyclonal anti-toxin A immunoglobin G (IgG) antibodies for generation of the specific fluorescent signal. Various anti-toxin antibodies were immobilized to the fibers. Affinity-purified polyclonal horse anti-toxin A antibodies performed better than the IgG fraction from the same horse serum or than the monoclonal anti-toxin A antibody BA11-3. Botulinum toxin could be detected within a minute, at concentrations as low as 5 ng/ml. The reaction was highly specific and no response was observed against tetanus toxin.     

Simple and tunable Förster resonance energy transfer-based bioprobes for high-throughput monitoring of caspase-3 activation in living cells by using flow cytometry

Sensing systems based on F?rster resonance energy transfer (FRET) can be used to monitor enzymatic reactions, protein-protein interactions, changes in conformation, and Ca2+ oscillations in studies on cellular dynamics. We developed a series of FRET-based chimeric bioprobes, each consisting of fluorescent protein attached to a fluorescent dye. Green and red fluorescent proteins were used as donors and a series of Alexa Fluor dyes was used as acceptors. The basic fluorescent proteins were substituted with appropriate amino acids for recognition of the target (caspase-3) and subjected to site-directed modification with a fluorescent dye. Variants that retained similar emission profiles to the parent proteins were readily derived for use as FRET-based bioprobes with various fluorescent patterns by incorporating various fluorescent proteins and dyes, the nature of which could be adjusted to experimental requirements. All the constructs prepared functioned as bioprobes for quantitative measurement of caspase-3 activity in vitro. Introduction of the bioprobes into cells was so simple and efficient that activation of caspase-3 upon apoptosis could be monitored by means of cytometric analysis. FRET-based bioprobes are valuable tool for high-throughput flow-cytometric analysis of many cellular events when used in conjunction with other fluorescent labels or markers. Statistical dynamic studies on living cells could provide indications of paracrine signaling.     

A surface plasmon resonance probe with a novel integrated reference sensor surface

A surface plasmon resonance (SPR) sensor probe with integrated reference surface is described. In order to fabricate the integrated reference surface, two dielectric layers with different thickness were deposited on the single gold SPR sensor surface via plasma polymerization of hexamethyldisiloxane. The working sensor surface was a 34 nm dielectric layer with immobilized bovine serum albumin (BSA) antigen and an adjacent thin 1 nm dielectric layer without BSA provided reference surface. A specific immunoreaction of anti-BSA antibody was detected after immersion of the SPR probe into sample solution. Simultaneous observation of reference and working surface response enabled determination of the immunoreaction without the need for the baseline measurement. Moreover, compensation of nonspecific adsorption could be confirmed using anti-human serum albumin antibody.     

Formation of nanofilms on cell surfaces to improve the insertion efficiency of a nanoneedle into cells

A nanoneedle, an atomic force microscope (AFM) tip etched to 200 nm in diameter and 10 μm in length, can be inserted into cells with the aid of an AFM and has been used to introduce functional molecules into cells and to analyze intracellular information with minimal cell damage. However, some cell lines have shown low insertion efficiency of the nanoneedle. Improvement in the insertion efficiency of a nanoneedle into such cells is a significant issue for nanoneedle-based cell manipulation and analysis. Here, we have formed nanofilms composed of extracellular matrix molecules on cell surfaces and found that the formation of the nanofilms improved insertion efficiency of a nanoneedle into fibroblast and neural cells. The nanofilms were shown to improve insertion efficiency even in cells in which the formation of actin stress fibers was inhibited by the ROCK inhibitor Y27632, suggesting that the nanofilms with the mesh structure directly contributed to the improved insertion efficiency of a nanoneedle.     

Measuring dynamics of caspase-8 activation in a single living HeLa cell during TNFalpha-induced apoptosis

In this study, we reported the first measurement of the dynamics of activation of caspase-8 in a single living cell. This measurement was conducted using a specially developed molecular sensor based on the FRET (fluorescence resonance energy transfer) technique. This sensor was constructed by fusing a CFP (cyan fluorescent protein) and a YFP (yellow fluorescent protein) with a linker containing a tandem caspase-8-specific cleavage site. The change of the FRET ratio upon cleavage was larger than 4-fold. Using this sensor, we found that during TNFalpha-induced apoptosis, the activation of caspase-8 was a slower process than that of caspase-3, and it was initiated much earlier than the caspase-3 activation. Inhibition of caspase-9 delayed the full activation of caspase-3 but did not affect the dynamics of caspase-8. Results of these single-cell measurements suggested that caspase-3 was activated by caspase-8 through two parallel pathways during TNFalpha-induced apoptosis in HeLa cells.     

Synthesis of 2-ethyl hexanol fatty acid esters in a packed bed bioreactor using a lipase immobilized on a textile membrane

An enzymatic process using a packed bed bioreactor with recirculation was developed for the scale-up synthesis of 2-ethylhexyl palmitate with a lipase from Candida sp. 99–125 immobilized on a fabric membrane by natural attachment to the membrane surface. Esterification was effectively performed by circulating the reaction mixture between a packed bed column and a substrate container. A maximum esterification yield of 98% was obtained. Adding molecular sieves and drying the immobilized lipase both decreased the water content at the reactor outlet and around the enzyme, which led to an increase in the rate of esterification. The long-term stability of the reactor was tested by continuing the reaction for 30 batches (over 300 h) with an average esterification yield of about 95%. This immobilized lipase bioreactor is scalable and is thus suitable for industrial production of 2-ethylhexyl palmitate.     

Fluorescence-mediated analysis of mitochondrial preprotein import in vitro

Mitochondrial biogenesis is a crucial element of the functional maintenance of a eukaryotic cell. The organelle must import the majority of its proteins from the cytosol where they are synthesized as precursors. In vitro import assays have been developed in which isolated mitochondria are incubated with precursor proteins, that are generated either by in vitro translation systems or by expression and purification as recombinant proteins. The detection of imported proteins is performed by autoradiography or by Western blot. We have now established a novel detection system for imported precursor proteins that is based on fluorescent labeling. We constructed a mitochondrial preprotein containing a C-terminal SNAP-tag that can label itself with a single fluorescein molecule in an enzymatic reaction. The fluorescent preproteins were efficiently imported into isolated mitochondria and showed kinetic behavior similar to that of standard preproteins. The fluorescence detection was sensitive and significantly faster than other comparable procedures. We also showed that precursor proteins containing a SNAP-tag domain could be successfully labeled in a postimport reaction in intact mitochondria. In summary, the use of a reporter domain modified with a fluorescent dye provides a novel, sensitive, and fast detection method to analyze the properties of the mitochondrial import reaction in vitro.     

Detection of myocardial ischemia-reperfusion injury using a fluorescent near-infrared zinc(II)-dipicolylamine probe and 99mTc glucarate

A fluorescent zinc 2,2'-dipicolylamine coordination complex PSVue?794 (probe 1) is known to selectively bind to phosphatidylserine exposed on the surface of apoptotic and necrotic cells. In this study, we investigated the cell death targeting properties of probe 1 in myocardial ischemia-reperfusion injury. A rat heart model of ischemia-reperfusion was used. Probe 1, control dye, or 99mTc glucarate was intravenously injected in rats subjected to 30-minute and 5-minute myocardial ischemia followed by 2-hour reperfusion. At 90 minutes or 20 hours postinjection, myocardial uptake was evaluated ex vivo by fluorescence imaging and autoradiography. Hematoxylin-eosin and cleaved caspase-3 staining was performed on myocardial sections to demonstrate the presence of ischemia-reperfusion injury and apoptosis. Selective accumulation of probe 1 could be detected in the area at risk up to 20 hours postinjection. Similar topography and extent of uptake of probe 1 and 99mTc glucarate were observed at 90 minutes postinjection. Histologic analysis demonstrated the presence of necrosis, but only a few apoptotic cells could be detected. Probe 1 selectively accumulates in myocardial ischemia-reperfusion injury and is a promising cell death imaging tool.     

End-point immobilization of recombinant thrombomodulin via sortase-mediated ligation

We report an enzymatic end-point modification and immobilization of recombinant human thrombomodulin (TM), a cofactor for activation of anticoagulant protein C pathway via thrombin. First, a truncated TM mutant consisting of epidermal growth factor-like domains 4-6 (TM(456)) with a conserved pentapeptide LPETG motif at its C-terminal was expressed and purified in E. coli. Next, the truncated TM(456) derivative was site-specifically modified with N-terminal diglycine containing molecules such as biotin and the fluorescent probe dansyl via sortase A (SrtA) mediated ligation (SML). The successful ligations were confirmed by SDS-PAGE and fluorescence imaging. Finally, the truncated TM(456) was immobilized onto an N-terminal diglycine-functionalized glass slide surface via SML directly. Alternatively, the truncated TM(456) was biotinylated via SML and then immobilized onto a streptavidin-functionalized glass slide surface indirectly. The successful immobilizations were confirmed by fluorescence imaging. The bioactivity of the immobilized truncated TM(456) was further confirmed by protein C activation assay, in which enhanced activation of protein C by immobilized recombinant TM was observed. The sortase A-catalyzed surface ligation took place under mild conditions and occurs rapidly in a single step without prior chemical modification of the target protein. This site-specific covalent modification leads to molecules being arranged in a definitively ordered fashion and facilitating the preservation of the protein's biological activity.     

The effect of electrochemical regeneration upon the enzymatic catalysis of a thermodynamically unfavorable reaction

The association between enzymatic and electrochemical reactions, enzymatic electrocatalysis, had proven to be a very powerful tooth in both analytical and synthetic fields. However, most of the combinations studied have involved enzymatic catalysis of irreversible or quasi-irreversible reaction. In the present work, we have investigated the possibility of applying enzymatic electrocatalysis to a case where the electrochemical reaction drives a thermodynamically unfavorable reversible reaction. Such thermodynamically unfavorable reactions include most of the oxidations catalyzed by dehydrogenases. Yeast alcohol dehydrogenase (E.C. 1.1.1.1) was chosen as a model enzyme because the oxidation of ethanol is thermodynamically very unfavorable and because its kinetics are well known. The electrochemical reaction was the oxidation of NADH which is particularly attractive as a method of cofactor regeneration. Both the electrochemical and enzymatic reactions occur in the same batch reactor in such a way that electrical energy is the only external driving force. Two cases were experimentally and theoretically developed with the enzyme either in solution or immobilized onto the electrode's surface. In both cases, the electrochemical reaction could drive the enzymatic reaction by NADH consumption in solution or directly in the enzyme's microenvironment. However even for a high efficiency of NADH consumption, the rate of enzymatic catalysis was limited by product (acetaldedehyde) inhibition. Extending this observation to the subject of organic synthesis catalyzed by dehydrogenases, we concluded that thermodynamically unfavorable reaction and can only be used in a process if efficient NAD regeneration and product elimination are simultaneously carried out within the reactor.     

A laser spectrofluorimeter for studies of cultured cells on the growth surface.

We have developed a new method for direct measurement of fluorescent probes associated with undisturbed monolayers of cultured fibroblasts. A helium-cadmium continuous wave laser produced excitation light at 325 nm to illuminate the cell monolayer on the front inner surface of a quartz sample tube. The emitted light from the cell monolayer passed through a scanning monochrometer to a low noise photomultiplier tube and was amplified with a photon-counting system. The fluorescent probe, cholesteryl 4-(3′-pyrenyl)butanoate, was incorporated into normal human low density lipoproteins (LDL). The interaction between LDL containing the fluorescent probe and the cell surface of normal human fibroblasts was examined. The uptake of the fluorescent LDL was measured as a function of temperature, concentration, time, specificity, and ability to suppress 3-hydroxy-3-methyl-glutaryl-CoA reductase. In all respects, LDL containing the fluorescent probe and native LDL were comparable. Using this technique, cell-surface interactions can be studied in situ so that changes in structure and function caused by removal of the cells from the growth surface can be avoided.     

A ready-to-use fluorimetric biosensor for superoxide radical using superoxide dismutase and peroxidase immobilized in sol-gel glasses

In this work, a highly sensitive fluorescent biosensor for quantitative superoxide radical detection, based on the coupled reaction superoxide dismutase-peroxidase enzymes and the use of the probe Amplex red, is described. Superoxide anion radical was produced via oxidation of xanthine by xanthine oxidase. Dismutation of superoxide was catalyzed by superoxide dismutase, generating hydrogen peroxide, which reacted stoichiometrically with the nonfluorescent Amplex red, in the presence of peroxidase, yielding the red-fluorescent oxidation product resorufin. The coupled superoxide dismutase-peroxidase system was immobilized in a single sol-gel matrix. The enzymatic activity of the encapsulated superoxide dismutase-peroxidase system was nearly identical to that of one of the soluble enzymes, indicating that sol-gel encapsulation preserved the hierarchy of the enzyme's activity. Specificity and reusability of the encapsulated system for up to four cycles were also demonstrated. The fluorescent biosensor was able to detect concentrations of superoxide as low as 20 nM in phospholipid model membranes composed of saturated or unsaturated phospholipids. These facts make this biosensor a simple, reliable, and highly sensitive method with a potential use in biological systems, food, and drinks.     

Application of an enzyme chip to the microquantification of l-phenylalanine

We describe here a new microquantification method of l-phenylalanine concentration in an extract from a dried blood spot by using the diaphorase-resazurin system. To miniaturize the fluorometric enzymatic microplate assay for the diagnosis of phenylketonuria, an enzyme chip immobilized with His-tag fused phenylalanine dehydrogenase (PheDH) was developed. His-tag fused PheDH was immobilized on the surface of nickel-coated slide glass. A microarray sheet (8 x 30 well) was fabricated with poly(dimethylsiloxane) (PDMS) using the photolithographic technique. An enzyme reaction chamber in a double-layered structure was constructed with different types of microarray PDMS sheets on the surface of Ni-coated slide glass immobilized with His-tagged PheDH. To evaluate the affinity toward the Ni-chelating ligand, eight kinds of His-tagged PheDH variants were constructed and expressed. (His)(6)- and (His)(9)-PheDH variants at the N terminus showed high adsorption ratio to Ni-chelating ligand. The V(max) and k(cat) values of the (His)(6)-PheDH variant at the N terminus for l-phenylalanine were higher than those of the (His)(9)-PheDH variant, and the (His)(6)-PheDH variant was found to be most suitable for immobilization onto nickel-coated slide glass. Fluorescence formed by resazurin-coupled enzymatic reaction (in a 0.2-microl reaction mixture) on the enzyme chip exhibited good linearity and a correlation coefficient up to 12.8 mg/dl of the l-phenylalanine-containing sample extracted from a dried blood spot on filter paper.