Identification of algI and algJ in the Pseudomonas aeruginosa alginate biosynthetic gene cluster which are required for alginate O acetylation.

Mucoid strains of Pseudomonas aeruginosa overproduce alginate, a linear exopolysaccharide Of D-mannuronate and variable amounts of L-guluronate. The mannuronate residues undergo modification by C-5 epimerization to form the L-guluronates and by the addition of acetyl groups at the 0-2 and 0-3 positions. Through genetic analysis, we previously identified algF, located upstream of algA in the 18-kb alginate biosynthetic operon, as a gene required for alginate acetylation. Here, we show the sequence of a 3.7-kb fragment containing the open reading frames termed algI, algJ, and algF. An algI::Tn5O1 mutant, which was defective in algIJFA because of the polar nature of the transposon insertion, produced alginate when algA was provided in trans. This indicated that the algIJF gene products were not required for polymer biosynthesis. To examine the potential role of these genes in alginate modification, mutants were constructed by gene replacement in which each gene (algI, algJ, or algF) was replaced by a polar gentamicin resistance cassette. Proton nuclear magnetic resonance spectroscopy showed that polymers produced by strains deficient in algIJF still contained a mixture of D-mannuronate and L-guluronate, indicating that C-5 epimerization was not affected. Alginate acetylation was evaluated by a colorimetric assay and Fourier transform-infrared spectroscopy, and this analysis showed that strains deficient in algIJF produced nonacetylated alginate. Plasmids that supplied the downstream gene products affected by the polar mutations were introduced into each mutant. The strain defective only in algF expression produced an alginate that was not acetylated, confirming previous results. Strains missing only algJ or algI also produced nonacetylated alginates. Providing the respective missing gene (algI, algJ, or algF) in trans restored alginate acetylation. Mutants defective in algI or algJ, obtained by chemical and transposon mutagenesis, were also defective in their ability to acetylate alginate. Therefore, algI and algJ represent newly identified genes that, in addition to algF, are required for alginate acetylation.     

Nucleotide sequence and expression of the Pseudomonas aeruginosa algF gene controlling acetylation of alginate

Colonization of the cystic fibrosis lung by Pseudomonas aeruginosa is greatly facilitated by the production of an exopolysaccharide called alginate. In this study we determined the nucleotide sequence of an alginate modification gene, algF, which controls the addition of acetyl groups to alginate. Expression of algF using a T7 promoter-expression system showed that algF codes for a 24.5 kDa polypeptide (predicted size 22 832 Da) that is processed to 19.5 kDa. The N-terminus of the processed polypeptide matched the predicted amino acid sequence of AlgF starting at Asp-29. An algF mutant failed to produce alginate owing to a polar effect on the downstream algA gene. Although the algA gene, provided in trans, restored synthesis of alginate, the alginate was non-acetylated. We show that a plasmid containing both the algF and algA gene complements the alginate acetylation defect of the algF mutant strain.     

Identification of Pseudomonas aeruginosa glpM, whose gene product is required for efficient alginate biosynthesis from various carbon sources.

In a mucB (algN) genetic background, insertion of an omega element approximately 200 bp downstream of glpD, encoding sn-glycerol-3-phosphate dehydrogenase from Pseudomonas aeruginosa, had an adverse effect on alginate biosynthesis from various carbon sources. The insertion inactivated glpM, a gene encoding a 12,040-M(r) hydrophobic protein containing 109 amino acids. This protein, which was expressed in a T7 RNA polymerase expression system, appears to be a cytoplasmic membrane protein.     

AlgX is a periplasmic protein required for alginate biosynthesis in Pseudomonas aeruginosa

Alginate, an exopolysaccharide produced by Pseudomonas aeruginosa, provides the bacterium with a selective advantage that makes it difficult to eradicate from the lungs of cystic fibrosis (CF) patients. Previous studies identified a gene, algX, within the alginate biosynthetic gene cluster on the P. aeruginosa chromosome. By probing cell fractions with anti-AlgX antibodies in a Western blot, AlgX was localized within the periplasm. Consistent with these results is the presence of a 26-amino-acid signal sequence. To examine the requirement for AlgX in alginate biosynthesis, part of algX in P. aeruginosa strain FRD1::pJLS3 was replaced with a nonpolar gentamicin resistance cassette. The resulting algXDelta::Gm mutant was verified by PCR and Western blot analysis and was phenotypically nonmucoid (non-alginate producing). The algXDelta::Gm mutant was restored to the mucoid phenotype with wild-type P. aeruginosa algX provided on a plasmid. The algXDelta::Gm mutant was found to secrete dialyzable oligouronic acids of various lengths. Mass spectroscopy and Dionex chromatography indicated that the dialyzable uronic acids are mainly mannuronic acid dimers resulting from alginate lyase (AlgL) degradation of polymannuronic acid. These studies suggest that AlgX is part of a protein scaffold that surrounds and protects newly formed polymers from AlgL degradation as they are transported within the periplasm for further modification and eventual transport out of the cell.     

Evidence that the algI/algJ gene cassette, required for O acetylation of Pseudomonas aeruginosa alginate, evolved by lateral gene transfer

Pseudomonas aeruginosa strains, isolated from chronically infected patients with cystic fibrosis, produce the O-acetylated extracellular polysaccharide, alginate, giving these strains a mucoid phenotype. O acetylation of alginate plays an important role in the ability of mucoid P. aeruginosa to form biofilms and to resist complement-mediated phagocytosis. The O-acetylation process is complex, requiring a protein with seven transmembrane domains (AlgI), a type II membrane protein (AlgJ), and a periplasmic protein (AlgF). The cellular localization of these proteins suggests a model wherein alginate is modified at the polymer level after the transport of O-acetyl groups to the periplasm. Here, we demonstrate that this mechanism for polysaccharide esterification may be common among bacteria, since AlgI homologs linked to type II membrane proteins are found in a variety of gram-positive and gram-negative bacteria. In some cases, genes for these homologs have been incorporated into polysaccharide biosynthetic operons other than for alginate biosynthesis. The phylogenies of AlgI do not correlate with the phylogeny of the host bacteria, based on 16S rRNA analysis. The algI homologs and the gene for their adjacent type II membrane protein present a mosaic pattern of gene arrangement, suggesting that individual components of the multigene cassette, as well as the entire cassette, evolved by lateral gene transfer. AlgJ and the other type II membrane proteins, although more diverged than AlgI, contain conserved motifs, including a motif surrounding a highly conserved histidine residue, which is required for alginate O-acetylation activity by AlgJ. The AlgI homologs also contain an ordered series of motifs that included conserved amino acid residues in the cytoplasmic domain CD-4; the transmembrane domains TM-C, TM-D, and TM-E; and the periplasmic domain PD-3. Site-directed mutagenesis studies were used to identify amino acids important for alginate O-acetylation activity, including those likely required for (i) the interaction of AlgI with the O-acetyl precursor in the cytoplasm, (ii) the export of the O-acetyl group across the cytoplasmic membrane, and (iii) the transfer of the O-acetyl group to a periplasmic protein or to alginate. These results indicate that AlgI belongs to a family of membrane proteins required for modification of polysaccharides and that a mechanism requiring an AlgI homolog and a type II membrane protein has evolved by lateral gene transfer for the esterification of many bacterial extracellular polysaccharides.     

Alginate lyase (AlgL) activity is required for alginate biosynthesis in Pseudomonas aeruginosa

To determine whether AlgL's lyase activity is required for alginate production in Pseudomonas aeruginosa, an algLdelta::Gm(r) mutant (FRD-MA7) was created. algL complementation of FRD-MA7 restored alginate production, but algL constructs containing mutations inactivating lyase activity did not, demonstrating that the enzymatic activity of AlgL is required for alginate production.     

Cloning of Pseudomonas aeruginosa algG, which controls alginate structure.

The biochemical mechanism by which alpha-L-guluronate (G) residues are incorporated into alginate by Pseudomonas aeruginosa is not understood. P. aeruginosa first synthesizes GDP-mannuronate, which is used to incorporate beta-D-mannuronate residues into the polymer. It is likely that the conversion of some beta-D-mannuronate residues to G occurs by the action of a C-5 epimerase at either the monomer (e.g., sugar-nucleotide) or the polymer level. This study describes the results of a molecular genetic approach to identify a gene involved in the formation or incorporation of G residues into alginate by P. aeruginosa. Mucoid P. aeruginosa FRD1 was chemically mutagenized, and mutants FRD462 and FRD465, which were incapable of incorporating G residues into alginate, were independently isolated. Assays using a G-specific alginate lyase from Klebsiella aerogenes and 1H-nuclear magnetic resonance analyses showed that G residues were absent in the alginates secreted by these mutants. 1H-nuclear magnetic resonance analyses also showed that alginate from wild-type P. aeruginosa contained no detectable blocks of G. The mutations responsible for defective incorporation of G residues into alginate in the mutants FRD462 and FRD465 were designated algG4 and algG7, respectively. Genetic mapping experiments revealed that algG was closely linked (greater than 90%) to argF, which lies at 34 min on the P. aeruginosa chromosome and is adjacent to a cluster of genes required for alginate biosynthesis. The clone pALG2, which contained 35 kilobases of P. aeruginosa DNA that included the algG and argF wild-type alleles, was identified from a P. aeruginosa gene bank by a screening method that involved gene replacement. A DNA fragment carrying algG was shown to complement algG4 and algG7 in trans. The algG gene was physically mapped on the alginate gene cluster by subcloning and Tn501 mutagenesis.     

Mutant analysis and cellular localization of the AlgI,AlgJ, and AlgF proteins required for O acetylation of alginate in Pseudomonas aeruginosa

Alginate is an extracellular polysaccharide produced by mucoid strains of Pseudomonas aeruginosa that are typically isolated from the pulmonary tracts of chronically infected cystic fibrosis patients. Alginate is a linear polymer of D-mannuronate and L-guluronate with O-acetyl ester linkages on the O-2 and/or O-3 position of the mannuronate residues. The presence of O-acetyl groups plays an important role in the ability of the polymer to act as a virulence factor, and the algF, algJ, and algI genes are known to be essential for the addition of O-acetyl groups to alginate. To better understand the mechanism of O acetylation of alginate, the cellular locations of the AlgI, AlgJ, and AlgF proteins were determined. For these studies, defined nonpolar algI, algJ, and algF deletion mutants of P. aeruginosa strain FRD1 were constructed, and each mutant produced alginate lacking O-acetyl groups. Expression of algI, algJ, or algF in trans in the corresponding mutant complemented each O acetylation defect. Random phoA (alkaline phosphatase [AP] gene) fusions to algF, algJ, and algI were constructed. All in-frame fusions to algF and algJ had AP activity, indicating that both AlgF and AlgJ were exported to the periplasm. Immunoblot analysis of spheroplasts and periplasmic fractions showed that AlgF was released with the periplasmic contents but that AlgJ remained with the spheroplast fraction. An N-terminal sequence analysis of AlgJ showed that its putative AlgJ signal peptide was not cleaved, suggesting that AlgJ is anchored to the cytoplasmic membrane by its uncleaved signal peptide. AP gene fusions were also used to map the membrane topology of AlgI, and the results suggest that it is an integral membrane protein with seven transmembrane domains. These results suggest that AlgI-AlgJ-AlgF may form a complex in the membrane that is the reaction center for O acetylation of alginate.     

Alg44, a unique protein required for alginate biosynthesis in Pseudomonas aeruginosa

Here the putative alginate biosynthesis gene alg44 of Pseudomonas aeruginosa was functionally assigned. Non-polar isogenic alg44 deletion mutants of P. aeruginosa were generated and did neither produce alginate nor released free uronic acids. No evidence for alginate enrichment in the periplasm was obtained. Alginate production was restored by introducing only the gene alg44. PhoA fusion protein analyses suggested that Alg44 is a soluble protein localized in the periplasm. Hexahistidine-tagged Alg44 was detected by immunoblotting. The corresponding 42.6 kDa protein was purified and identified by MALDI/TOF-MS analysis. Alg44 might be directly involved in alginate polymerization presumably by exerting a regulatory function.     

Identification of a biosynthetic gene cluster in rice for momilactones

Rice diterpenoid phytoalexins such as momilactones and phytocassanes are produced in suspension-cultured rice cells treated with a chitin oligosaccharide elicitor and in rice leaves irradiated with UV light. The common substrate geranylgeranyl diphosphate is converted into diterpene hydrocarbon precursors via a two-step sequential cyclization and then into the bioactive phytoalexins via several oxidation steps. It has been suggested that microsomal cytochrome P-450 monooxygenases (P-450s) are involved in the downstream oxidation of the diterpene hydrocarbons leading to the phytoalexins and that a dehydrogenase is involved in momilactone biosynthesis. However, none of the enzymes involved in the downstream oxidation of the diterpene hydrocarbons have been identified. In this study, we found that a putative dehydrogenase gene (AK103462) and two functionally unknown P-450 genes (CYP99A2 and CYP99A3) form a chitin oligosaccharide elicitor- and UV-inducible gene cluster, together with OsKS4 and OsCyc1, the diterpene cyclase genes involved in momilactone biosynthesis. Functional analysis by heterologous expression in Escherichia coli followed by enzyme assays demonstrated that the AK103462 protein catalyzes the conversion of 3beta-hydroxy-9betaH-pimara-7,15-dien-19,6beta-olide into momilactone A. The double knockdown of CYP99A2 and CYP99A3 specifically suppressed the elicitor-inducible production of momilactones, strongly suggesting that CYP99A2, CYP99A3, or both are involved in momilactone biosynthesis. These results provide strong evidence for the presence on chromosome 4 of a gene cluster involved in momilactone biosynthesis.     

Identification of regB, a gene required for optimal exotoxin A yields in Pseudomonas aeruginosa

The yield of exotoxin A from Pseudomonas aeruginosa has been shown to be strain-dependent. Exotoxin A production requires the presence of the positive regulatory gene, regA. We cloned the regA genetic locus from the prototypical P. aeruginosa strain PAO1 and examined its ability to influence exotoxin A yields compared to the same region cloned from the hypertoxin-producing strain, PA103. The P. aeruginosa regA mutant strain, PA103-29, containing the PAO1 regA locus in trans produced approximately five to seven times less extracellular exotoxin A than PA103-29 containing the regA locus cloned from the hypertoxigenic strain, PA103. Nucleotide sequence analysis of the PAO1 regA locus revealed several differences, the most striking of which was the absence of a second open reading frame that was present in the analogous PA103 DNA. In addition, an amino acid substitution was found at position 144 of RegA (Thr in PAO1 and Ala in PA103). Recombinant molecules were constructed to test the contribution of each of these changes in nucleotide sequence on extracellular exotoxin A yields. The amino acid substitution in the PAO1 RegA protein was found not to affect overall exotoxin A yields. In contrast, the presence of the second open reading frame immediately downstream of the PA103 regA gene was found to influence extracellular exotoxin A yields. This open reading frame encodes a gene which we call regB. Nucleotide sequence analysis indicates that regB is 228 nucleotides in length and encodes a protein of 7527 Daltons. Our data suggest that regB is required for optimal exotoxin A production and its absence in strain PAO1 partially accounts for the difference in yield of extracellular exotoxin A between P. aeruginosa strains PAO1 and PA103.     

Identification of Pseudomonas aeruginosa genes required for epithelial cell injury

We have developed a simple, reproducible and rapid genetic screen for Pseudomonas aeruginosa -induced epithelial cell cytotoxicity in cultures of MDCK cells. This screen was used to isolate isogenic transposon-tagged non-cytotoxic mutants of a cytotoxic and lung-virulent strain of P. aeruginosa (PA103). The transposon-insertion site was determined by using an inverse polymerase chain reaction followed by DNA-sequence analysis. On the basis of phenotype and sequence analysis, these mutants fell into four classes. One class had absent or defective pili, based on their resistance to phage PO4 and/or loss of twitching motility (twt⁻). A second class exhibited decreased adherence. A third class of mutants exhibited probable defects in the machinery or targets of type III protein secretion. A final class of mutants exhibited decreased but not absent cytotoxicity. This class included members of the first three classes as well as other mutants. These results suggest that localized cytotoxicity is likely to require several steps and several components, including pili and other (unidentified) extracellular proteins. The type III protein-secretion apparatus appears to be involved in this process.     

Role of alginate and its O acetylation in formation of Pseudomonas aeruginosa microcolonies and biofilms

Attenuated total reflection/Fourier transform-infrared spectrometry (ATR/FT-IR) and scanning confocal laser microscopy (SCLM) were used to study the role of alginate and alginate structure in the attachment and growth of Pseudomonas aeruginosa on surfaces. Developing biofilms of the mucoid (alginate-producing) cystic fibrosis pulmonary isolate FRD1, as well as mucoid and nonmucoid mutant strains, were monitored by ATR/FT-IR for 44 and 88 h as IR absorbance bands in the region of 2,000 to 1,000 cm(-1). All strains produced biofilms that absorbed IR radiation near 1,650 cm(-1) (amide I), 1,550 cm(-1) (amide II), 1,240 cm(-1) (P==O stretching, C---O---C stretching, and/or amide III vibrations), 1,100 to 1,000 cm(-1) (C---OH and P---O stretching) 1,450 cm(-1), and 1,400 cm(-1). The FRD1 biofilms produced spectra with an increase in relative absorbance at 1,060 cm(-1) (C---OH stretching of alginate) and 1,250 cm(-1) (C---O stretching of the O-acetyl group in alginate), as compared to biofilms of nonmucoid mutant strains. Dehydration of an 88-h FRD1 biofilm revealed other IR bands that were also found in the spectrum of purified FRD1 alginate. These results provide evidence that alginate was present within the FRD1 biofilms and at greater relative concentrations at depths exceeding 1 micrometer, the analysis range for the ATR/FT-IR technique. After 88 h, biofilms of the nonmucoid strains produced amide II absorbances that were six to eight times as intense as those of the mucoid FRD1 parent strain. However, the cell densities in biofilms were similar, suggesting that FRD1 formed biofilms with most cells at depths that exceeded the analysis range of the ATR/FT-IR technique. SCLM analysis confirmed this result, demonstrating that nonmucoid strains formed densely packed biofilms that were generally less than 6 micrometer in depth. In contrast, FRD1 produced microcolonies that were approximately 40 micrometer in depth. An algJ mutant strain that produced alginate lacking O-acetyl groups gave an amide II signal approximately fivefold weaker than that of FRD1 and produced small microcolonies. After 44 h, the algJ mutant switched to the nonmucoid phenotype and formed uniform biofilms, similar to biofilms produced by the nonmucoid strains. These results demonstrate that alginate, although not required for P. aeruginosa biofilm development, plays a role in the biofilm structure and may act as intercellular material, required for formation of thicker three-dimensional biofilms. The results also demonstrate the importance of alginate O acetylation in P. aeruginosa biofilm architecture.