Tn5 insertion specificity is not influenced by IS50 end sequences in target DNA.

Summary The bacterial transposon Tn5 inserts into dozens of sites in a gene, some of which are used preferentially (hotspots). Features of certain sites and precedents provided by several other transposons had suggested that sequences in target DNA corresponding to the ends of Tn5 or of its component IS50 elements might facilitate transposition to these sites. We tested this possibility using derivatives of plasmid pBR322 carrying IS50 I or O end sequences. Tn5 inserted frequently into an IS50 I end at the major hotspot in pBR322, but not into either an I end or an O end 230 by away from this hotspot. Adenine (dam) methylation at GATC sequences in the I end segment interferes with its use as the end of a transposon, but a dam ^– mutation did not affect Tn5 insertion relative to an I end sequence in target DNA. These results support models in which the ability of Tn5 to find its preferred sites depends on several features of DNA sequence and conformation, and in which target selection is distinct from recognition of the element ends during transposition.     

Nucleotide sequence of the ends of the conjugative shuttle transposon Tn1545

Summary The conjugative shuttle transposon Tn1545 from Streptococcus pneumoniae transposes in various gram-positive bacterial genera following self-transfer and in Escherichia coli after cloning. Analysis of the junction fragments and of the targets before insertion and after excision of the element by DNA hybridization and sequencing indicated that Tn1545 (1) is not flanked by terminal repeated sequences in either direct or opposite orientation, (2) is flanked, in an asymmetric fashion, by terminal variable base pairs, one at the left and three at the right of the element, (3) inserts in a target DNA consensus sequence, (4) does not generate duplication of the target DNA upon insertion, and (5) excises precisely.     

IS231A insertion specificity: consensus sequence and DNA bending at the target site

In its natural host, Bacillus thuringiensis, the insertion sequence IS231A is preferentially inserted into the terminal inverted repeats of the transposon Tn4430. Using a novel transposition assay, we demonstrate that the Tn4430 ends behave as insertion hot spots for IS231A in Escherichia coli. Sequence analysis reveals that IS231A insertion sites match the 5′-GGG(N)₅CCC-3′consensus. However, this consensus is not the only determinant of IS231A insertion specificity. Although both Tn4430 ends have identical sequences, one is strongly preferred to the other and the orientation of insertion into this end is not random. We demonstrate that this preference is determined by the flanking regions of the site. These regions display a conserved periodic organization of their sequence which, by conferring anisotropic flexibility, would induce the DNA to bend in a roughly ‘S’ -shaped structure centred on the target consensus. DNA conformation analysis by polyacrylamide gel electrophoresis indeed shows that the preferred target site of IS231A is flanked by DNA segments curved in opposite directions. We present a model in which DNA bendability and curvature would contribute to the positioning of IS231A transposase on the target DNA.     

Evidence for clustered pathogenicity genes in Xanthomonas campestris pv. campestris

Summary Plasmid pIJ3000 contains DNA from the plant pathogen Xanthomonas campestris pv. campestris which restores symptom production to a non-pathogenic mutant. pIJ3000 was mutagenised with the kanamycin resistance transposon Tn5 in Escherichia coli, and the sites of insertion were mapped physically. Derivatives of pIJ3000 containing Tn5 inserted in X. c. campestris DNA were introduced into a wild-type X. c. campestris strain, and the Tn5 insertions recombined into the genome by a marker exchange process. The resulting strains were tested for pathogenicity to turnip seedlings.The parts of the cloned DNA required for symptom production by the wild-type were defined by correlating the phenotype of each Tn5 insertion in the genome with its position in pIJ3000. This led to the identification of a region of approximately 10 kb consisting of a cluster of genes involved in pathogenicity.Dedicated to Professor Georg Melchers to celebrate his 50-year association with the journal     

Specificity of Transposon Tn5 Insertion

Genetic mapping studies had shown that the bacterial transposon Tn5 can insert into many sites in a gene, but that some sites are preferred. To begin understanding Tn5's insertion specificity at the molecular level, we selected transpositions of Tn5 from the Escherichia coli chromosome to the plasmid pBR322 and analyzed the resultant pBR322::Tn5 plasmids by restriction endonuclease digestion and DNA sequencing. Seventy-five insertions in the tet gene were found at 28 sites including one major hotspot (with 21 insertions) and four lesser hotspots (with four to ten insertions each). All five hotspots are within the first 300 of the 1250-base pair (bp) tet gene. In contrast, 31 independent insertions in the amp gene were found in at least 27 distinct sites.—Tn5 generates 9 bp target sequence duplications when it transposes. Such transposon-induced duplications are generally taken to indicate that cleavages of complementary target DNA strands are made 9 bp apart during transposition. DNA sequence analysis indicated that GC base pairs occupy positions 1 and 9 in the duplications at each of the five hotspots examined, suggesting a GC-cutting preference during Tn5 transposition.     

The new class 11 transposon Tn163 is plasmid-borne in two unrelated Rhizobium leguminosarum biovar viciae strains

Tn163 is a transposable element identified in Rhizobium leguminosarum bv. viciae by its high insertion rate into positive selection vectors. The 4.6 kb element was found in only one further R. leguminosarum bv. viciae strain out of 70 strains investigated. Both unrelated R. leguminosarum bv. viciae strains contained one copy of the transposable element, which was localized in plasmids native to these strains. DNA sequence analysis revealed three large open reading frames (ORFs) and 38 bp terminal inverted repeats. ORF1 encodes a putative protein of 990 amino acids displaying strong homologies to transposases of class 11 transposons. ORF2, transcribed in the opposite direction, codes for a protein of 213 amino acids which is highly homologous to DNA invertases and resolvases of class II transposons. Homology of ORF1 and ORF2 and the genetic structure of the element indicate that Tn163 can be classified as a class II transposon. It is the first example of a native transposon in the genus Rhizobium. ORF3, which was found not to be involved in the transposition process, encodes a putative protein (256 amino acids) of unknown function. During transposition Tn163 produced direct repeats of 5 bp, which is typical for transposons of the Tn3 family. However, one out of the ten insertion sites sequenced showed a 6 by duplication of the target DNA; all duplicated sequences were A/T rich. Insertion of Tn163 into the sacB gene revealed two hot spots. Chromosomes of different R. leguminosarum bv. viciae strains were found to be highly refractory to the insertion of Tn163.     

A practical random mutagenesis system for probiotic Lactobacillus casei using Tn5 transposition complexes

Aims: Despite the fact that the entire genome sequence of probiotic Lactobacillus casei has recently been available, their mechanisms of beneficial effects are poorly clarified, probably because of the lack of an efficient mutagenesis system. The aim of this study was to establish a practical random mutagenesis system of L. casei using the Tn5 transposome complexes. Methods and Results: We optimized the conditions for transformation using a plasmid pUCYIT356‐1‐Not2 and then transposition reaction using Tn5 transposome system for L. casei ATCC 27139. Tn5 insertion library of this strain being consisted of 9408 mutants was constructed by repeating the mutagenesis procedure. To examine the utility of this mutagenesis system, we screened a panel of insertion mutants for nutrient requirements. Six auxotrophic mutants were isolated and their Tn5 insertion sites were determined by inverse PCR, which demonstrated that insertions occur randomly throughout the whole bacterial genome. Conclusions: Tn5 transposome system functioned efficiently to generate transposon insertion mutants of L. casei and enabled to construct useful L. casei Tn5 insertion library at optimized conditions for transformation and transposition. Significance and Impact of the Study: The availability of this system facilitates the study of the mechanisms of beneficial effects of L. casei for human health.     

Transposon-induced symbiotic mutants of Bradyrhizobium japonicum: isolation of two gene regions essential for nodulation

Summary Two strains of the soybean endosymbiont Bradyrhizobium japonicum, USDA 110 and 61 A101 C, were mutagenized with transposon Tn5. After plant infection tests of a total of 6,926 kanamycin and streptomycin resistant transconjugants, 25 mutants were identified that are defective in nodule formation (Nod^-) or nitrogen fixation (Fix^-). Seven Nod^- mutants were isolated from strain USDA 110 and from strain 61 A101 C, 4 Nod^- mutants and 14 Fix^- mutants were identified. Subsequent auxotrophic tests on these symbiotically defective mutants identified 4 His^- Nod^- mutants of USDA 110. Genomic Southern analysis of the 25 mutants revealed that each of them carried a single copy of Tn5 integrated in the genome. Three 61 A101 C Fix^- mutants were found to have vector DNA co-integrated along with Tn5 in the genome. Two independent DNA regions flanking Tn5 were cloned from the three nonauxotrophic Nod^- mutants and one His^-Nod^- mutant of USDA 110. Homogenotization of the cloned fragments into wild-type strain USDA 110 and subsequent nodulation assay of the resulting homogenotes confirmed that the Tn5 insertion was responsible for the Nod^- phenotype. Partial EcoR1 restriction enzyme maps around the Tn5 insertion sites were generated. Hybridization of these cloned regions to the previously cloned nod regions of R. meliloti and nif and nod regions of B. japonicum USDA 110 showed no homology, suggesting that these regions represent new symbiotic clusters of B. japonicum.     

Precise excision of bacterial transposon Tn5 in yeast

Summary We have demonstrated that precise excision of bacterial transposon Tn5 can occur in the yeast, Saccharomyces cerevisiae. Tn5 insertions in the yeast gene LYS2 were generated by transposon mutagenesis made in Escherichia coli by means of a ::Tn5 vector. Nine insertions of Tn5 into the structural part of the yeast LYS2 gene situated in a shuttle epsiomal plasmid were selected. All the plasmids with a Tn5 insertion were used to transform yeast strains carrying a deletion of the entire LYS2 gene or a deletion of the part of LYS2 overlapping the point of insertion.All insertions inactivated the LYS2 gene and were able to revert with low (about 10^-8) frequencies to lysine prototrophy. Restriction analysis of revertant plasmids revealed them to be indistinguishable from the original plasmid without Tn5 insertion. DNA sequencing of the regions containing the points of insertions, made for two revertants, proved that Tn5 excision was completely precise.     

Transposon mutagenesis in Azospirillum brasilense: isolation of auxotrophic and Nif- mutants and molecular cloning of the mutagenized nifDNA

Summary We report the successful mutagenesis of Azospirillum brasilense 29710 Rif Sm with transposon Tn5. The narrow host-range plasmid pGS9 (p15A replicon), which possesses broad host-range N-type transfer genes, was used as the suicide vehicle to deliver Tn5 in Azospirillum. Out of 900 colonies tested, 0.8% proved to be auxotrophic. One mutant altered in indoleacetic acid (auxin) biosynthesis was isolated and, in addition, three mutants completely defective in nitrogen fixation (nif) were obtained. All the mutants tested contained a single copy of Tn5 integrated randomly in the genome. The Tn5-mutagenized EcoRI fragments were cloned from the three Nif^- mutants. Physical analysis of cloned DNA showed that Tn5 was present on a different EcoRI fragment in each case, ranging in size from 15–17 kb. The nitrogenase structural genes (nifHDK) in A. brasilense 29710 Rif Sm were localized on a 6.7 kb EcoRI fragment. We found that Tn5 is not inserted in the nifHDK genes in the Nif^- mutants reported here. Site-directed mutagenesis using the cloned, Tn5-containing DNA from mutant Nif27(pMS188), produced a large number of Nif^- transconjugants of the A. brasilense 29710 Rif wild-type strain, showing the linkage between Tn5 insertion and the Nif^- phenotype. This is the first time that transposon-mutagenized auxotrophic, Nif^- and other mutants have been available for genetic analysis in Azospirillum. This should greatly facilitate the cloning and mapping of genes involved in nitrogen fixation as well as in many other phenotypic characteristics of Azospirillum.     

Identification of Tn4430, a transposon of Bacillus thuringiensis functional in Escherichia coli

Summary The mobile genetic element Tn4430, originating from the gram-positive bacterium, Bacillus thuringiensis, and previously described as the Th-sequence, is the first transposon isolated from the genus Bacillus. In the present work a gene (APH-III) conferring resistance to kanamycin was inserted into this 4.2 kb transposon. Transposition experiments showed that Tn4430APH-III could transpose in the gram-negative host Escherichia coli when its insertion functions were supplied by an intact copy of Tn4430. By transposing Tn4430APH-III directly onto pBR322, it was possible to determine the nucleotide sequence of the terminal inverted repeats of Tn4430 and of the target DNA site. Identical 38 bp in inverted orientation are situated at each end of the transposon and there is a direct duplication of 5 bp at the insertion site. Thus, it is clear that Tn4430 is closely related to the transposons belonging to the Tn3 family (class II elements).     

Transposon mutagenesis: Cloning of chromosomal DNA from the site of Tn916 insertion using polymerase chain reaction

A protocol that allows fast recovery and further analyses of chromosomal DNA adjacent to the Tn916 site of insertion is described. The procedure is based on single specific primer PCR amplification using restricted chromosomal DNA ligated into a suitable vector. Two primers, one Tn916-specific and the second vector-specific, allow amplification of the chromosomal DNA flanking the site of insertion.     

Cloning and Sequencing of the Spore Germination Gene of Bacillus megaterium ATCC 12872: Similarities to the NaH-Antiporter Gene of Enterococcus hirae

The germination mutant TM-31 of Bacillus megaterium ATCC 12872, was isolated by transposon Tn917 insertional mutagenesis. Glucose, L -proline, L -leucine and KNO₃ germinated TM-31 poorly. The DNA in the region of the Tn917 insertion was cloned, and its nucleotide sequence determined. One major open reading frame was present on the cloned DNA. The hydrophobic protein encoded is presumably membrane-associated. A homology search revealed that the gene encoded in the region of the Tn917 insertion is homologous to napA of Enterococcus hirae. napA codes for the NaH-antiporter. It is hypothesized that transport of cations must play an important role in spore germination in B. megaterium ATCC 12872.     

Plasposons: Modular Self-Cloning Minitransposon Derivatives for Rapid Genetic Analysis of Gram-Negative Bacterial Genomes

A series of modular mini-transposon derivatives which permit the rapid cloning and mapping of the DNA flanking the minitransposon’s site of insertion has been developed. The basic plasposon, named TnMod, consists of the Tn5 inverted repeats, a conditional origin of replication, rare restriction endonuclease multiple cloning sites, and exchangeable antibiotic resistance cassettes. The broad host range and low target DNA sequence specificity of the Tn5 transposase, in combination with the flexibility afforded by the modular arrangement of TnMod, result in a versatile tool for the mapping of insertional mutations and the rapid recovery of clones from gram-negative bacteria.     

Integration of a transposable DNA sequence which mediates ampicillin resistance into Clo DF13 plasmid DNA: determination of the site and orientation of TnA insertions.

The isolation and characterization of Clo DF13 plasmids containing a transposable DNA sequence (TnA) that specifies for ampicillin resistance is described. The particular transposon is derived from the R plasmid pRI30, and is designated Tn901. In order to determine the site and orientation of Tn901 insertions into the Clo DF13 genome, we made use of restriction endonucleases and heteroduplex mapping. For this purpose, Clo DF13 plasmid DNA and DNA of Clo DF13::Tn901 plasmids were digested with endonucleases HincII, PstI, BamH-I, SalI, and HpaI or with a combination of two of these enzymes. By analysis of the resulting fragmentation patterns, the physical maps of Clo DF13 DNA and Tn901 DNA could be derived. Furthermore, the site and orientation of Tn901 insertions into the Clo DF13 genome could be determined by this approach. The data obtained were verified by heteroduplex mapping. Analysis of 33 independently isolated Clo DF13 recombinant plasmids showed that insertion of Tn901 had occurred at 31 different sites. No preference with respect to the orientation of Tn901 was observed. Insertion of Tn901 into a segment of about 20% of the Clo DF13 genome resulted in the loss of cloacin production, indicating that the structural gene coding for cloacin is located in this area. The sites of Tn901 insertions within Clo DF13 were more or less scattered; however, no Tn901 insertion sites were found in two distinct areas comprising 11 and 17%, respectively, of the Clo DF13 genome. Transposition of Tn901 DNA to the copy mutant Clo DF13-rep3 showed that the β-lactamase activity and the minimal inhibitory concentration of ampicillin were correlated to the number of plasmid copies per cell.     

Site-specific properties of Tn7 transposition into the E. coli Chromosome

Summary A study has been made of the insertional properties of transposon Tn7, a 14 kilobase transposable element encoding resistances to trimethoprim, streptomycin and specitinomycin. It has previously been shown that Tn7 transposes at a low frequency and with low specificity into multiple sites in large transmissible plasmids. However, Tn7 transposes with extrame specificity and at high efficiency into the E. coli chromosome. In all cases we have studied, insertion of Tn7 into the chromosome has occurred at a unique site and with a unique orientation. A combination of genetic and biochemical techniques have been used to precisely locate this site on the E. coli chromosome to minute 82 on the linkage map between markers glmS and uncA.To investigate the nature of this highly specific transpositional event, a small region of the E. coli chromosome that includes the unique site, was cloned into the plasmid vector pBR322. Subsequently a lkb restriction fragment, including the Tn7 insertion site, was sub-cloned from this plasmid into the plasmid pACYC184. We show that Tn7 transposes into both these plasmid recombinants with the frequency and specificity characteristie of the E. coli chromosome.     

Molecular cloning of the tolC locus of Escherichia coli K-12 with the use of transposon Tn10

Summary We have cloned the tolC gene of E. coli K-12 into pSF2124 by using transposon Tn10 as the marker to first isolate the relevant DNA fragment. The gene is on a 10.5 kb EcoRI fragment, and Tn5 insertion mutagenesis locates the gene near one end of this EcoRI fragment. An EcoRI-PstI fragment has been subcloned into pBR322 to facilitate further analysis of the gene.Abbreviations Tris Tris (hydroxymethyl) aminomethane - EDTA Ethylenediamine tetra-acetic acid - DOC Sodium deoxycholate - DNA Deoxyribonucleic acid - SDS Sodium dodecyl sulphate - kb kilo base pairs     

The protein–protein interactions required for assembly of the Tn3 resolution synapse

The site-specific recombinase Tn3 resolvase initiates DNA strand exchange when two res recombination sites and six resolvase dimers interact to form a synapse. The detailed architecture of this intricate recombination machine remains unclear. We have clarified which of the potential dimer–dimer interactions are required for synapsis and recombination, using a novel complementation strategy that exploits a previously uncharacterized resolvase from Bartonella bacilliformis (“Bart”). Tn3 and Bart resolvases recognize different DNA motifs, via diverged C-terminal domains (CTDs). They also differ substantially at N-terminal domain (NTD) surfaces involved in dimerization and synapse assembly. We designed NTD-CTD hybrid proteins, and hybrid res sites containing both Tn3 and Bart dimer binding sites. Using these components in in vivo assays, we demonstrate that productive synapsis requires a specific “R” interface involving resolvase NTDs at all three dimer-binding sites in res. Synapses containing mixtures of wild-type Tn3 and Bart resolvase NTD dimers are recombination-defective, but activity can be restored by replacing patches of Tn3 resolvase R interface residues with Bart residues, or vice versa. We conclude that the Tn3/Bart family synapse is assembled exclusively by R interactions between resolvase dimers, except for the one special dimer–dimer interaction required for catalysis.     

Tn501 insertion mutagenesis in Pseudomonas aeruginosa PAO

Summary Transposon insertion mutagenesis of the Pseudomonas aeruginosa PAO chromosome with Tn1 and Tn501 was carried out using a mutant plasmid of R68::Tn501 temperature-sensitive for replication and maintenance. This method consists of three steps. Firstly, the temperature-independent, drug-resistant clones were selected from the strain carrying this plasmid. In the temperature-indepent clones, the plasmid was integrated into the chromosome by Tn1- or Tn501-mediated cointegrate formation. Secondly, such clones were cultivated at a permissive temperature to provoke the excision of the integrated plasmid from the chromosome. Excision occurred by the reciprocal recombination between the two copies of Tn1 or Tn501 flanking the integrated plasmid, leaving one Tn1 or Tn501 insertion on the chromosome. Thirdly, the excised plasmid was cured by cultivating these isolates at a non-permissive temperature without selection for the drug resistance. Using this method, we isolated 1 Tn1-induced and 43 Tn501-induced auxotropic mutations in this organism. Genetic mapping allowed us to identify two new genes, pur-8001 and met-8003. The Tn501-induced auxotrophic mutations were distributed non-randomly among auxotrophic genes, and the reversion of the mutations by precise excision of the Tn501 insertion occurred very rarely.     

Establishment of an Arbitrary PCR for Rapid Identification of Tn917 Insertion Sites in Staphylococcus epidermidis: Characterization of Biofilm-Negative and Nonmucoid Mutants

Transposon mutagenesis with the Enterococcus faecalis transposon Tn917 is a genetic approach frequently used to identify genes related with specific phenotypes in gram-positive bacteria. We established an arbitrary PCR for the rapid and easy identification of Tn917 insertion sites in Staphylococcus epidermidis with six independent, well-characterized biofilm-negative Tn917 transposon mutants, which were clustered in the icaADBC gene locus or harbor Tn917 in the regulatory gene rsbU. For all six of these mutants, short chromosomal DNA fragments flanking both transposon ends could be amplified. All fragments were sufficient to correctly identify the Tn917 insertion sites in the published S. epidermidis genomes. By using this technique, the Tn917 insertion sites of three not-yet-characterized biofilm-negative or nonmucoid mutants were identified. In the biofilm-negative and nonmucoid mutant M12, Tn917 is inserted into a gene homologous to the regulatory gene purR of Bacillus subtilis and Staphylococcus aureus. The Tn917 insertions of the nonmucoid but biofilm-positive mutants M16 and M20 are located in genes homologous to components of the phosphoenolpyruvate-sugar phosphotransferase system (PTS) of B. subtilis, S. aureus, and Staphylococcus carnosus, indicating an influence of the PTS on the mucoid phenotype in S. epidermidis.