A microtubule-destabilizing kinesin motor regulates spindle length and anchoring in oocytes

The kinesin-13 motor, KLP10A, destabilizes microtubules at their minus ends in mitosis and binds to polymerizing plus ends in interphase, regulating spindle and microtubule dynamics. Little is known about kinesin-13 motors in meiosis. In this study, we report that KLP10A localizes to the unusual pole bodies of anastral Drosophila melanogaster oocyte meiosis I spindles as well as spindle fibers, centromeres, and cortical microtubules. We frequently observe the pole bodies attached to cortical microtubules, indicating that KLP10A could mediate spindle anchoring to the cortex via cortical microtubules. Oocytes treated with drugs that suppress microtubule dynamics exhibit spindles that are reoriented more vertically to the cortex than untreated controls. A dominant-negative klp10A mutant shows both reoriented and shorter oocyte spindles, implying that, unexpectedly, KLP10A may stabilize rather than destabilize microtubules, regulating spindle length and positioning the oocyte spindle. By altering microtubule dynamics, KLP10A could promote spindle reorientation upon oocyte activation.     

Klp10A, a microtubule-depolymerizing kinesin-13, cooperates with CP110 to control Drosophila centriole length

Klp10A is a kinesin-13 of Drosophila melanogaster that depolymerizes cytoplasmic microtubules. In interphase, it promotes microtubule catastrophe; in mitosis, it contributes to anaphase chromosome movement by enabling tubulin flux. Here we show that Klp10A also acts as a microtubule depolymerase on centriolar microtubules to regulate centriole length. Thus, in both cultured cell lines and the testes, absence of Klp10A leads to longer centrioles that show incomplete 9-fold symmetry at their ends. These structures and associated pericentriolar material undergo fragmentation. We also show that in contrast to mammalian cells where depletion of CP110 leads to centriole elongation, in Drosophila cells it results in centriole length diminution that is overcome by codepletion of Klp10A to give longer centrioles than usual. We discuss how loss of centriole capping by CP110 might have different consequences for centriole length in mammalian and insect cells and also relate these findings to the functional interactions between mammalian CP110 and another kinesin-13, Kif24, that in mammalian cells regulates cilium formation.     

Plus end-specific depolymerase activity of Kip3, a kinesin-8 protein, explains its role in positioning the yeast mitotic spindle

The budding yeast protein Kip3p is a member of the conserved kinesin-8 family of microtubule motors, which are required for microtubule-cortical interactions, normal spindle assembly and kinetochore dynamics. Here, we demonstrate that Kip3p is both a plus end-directed motor and a plus end-specific depolymerase--a unique combination of activities not found in other kinesins. The ATPase activity of Kip3p was activated by both microtubules and unpolymerized tubulin. Furthermore, Kip3p in the ATP-bound state formed a complex with unpolymerized tubulin. Thus, motile kinesin-8s may depolymerize microtubules by a mechanism that is similar to that used by non-motile kinesin-13 proteins. Fluorescent speckle analysis established that, in vivo, Kip3p moved toward and accumulated on the plus ends of growing microtubules, suggesting that motor activity brings Kip3p to its site of action. Globally, and more dramatically on cortical contact, Kip3p promoted catastrophes and pausing, and inhibited microtubule growth. These findings explain the role of Kip3p in positioning the mitotic spindle in budding yeast and potentially other processes controlled by kinesin-8 family members.     

Functionally distinct kinesin-13 family members cooperate to regulate microtubule dynamics during interphase

Regulation of microtubule polymerization and depolymerization is required for proper cell development. Here, we report that two proteins of the Drosophila melanogaster kinesin-13 family, KLP10A and KLP59C, cooperate to drive microtubule depolymerization in interphase cells. Analyses of microtubule dynamics in S2 cells depleted of these proteins indicate that both proteins stimulate depolymerization, but alter distinct parameters of dynamic instability; KLP10A stimulates catastrophe (a switch from growth to shrinkage) whereas KLP59C suppresses rescue (a switch from shrinkage to growth). Moreover, immunofluorescence and live analyses of cells expressing tagged kinesins reveal that KLP10A and KLP59C target to polymerizing and depolymerizing microtubule plus ends, respectively. Our data also suggest that KLP10A is deposited on microtubules by the plus-end tracking protein, EB1. Our findings support a model in which these two members of the kinesin-13 family divide the labour of microtubule depolymerization.     

A unique kinesin-8 surface loop provides specificity for chromosome alignment

Microtubule length control is essential for the assembly and function of the mitotic spindle. Kinesin-like motor proteins that directly attenuate microtubule dynamics make key contributions to this control, but the specificity of these motors for different subpopulations of spindle microtubules is not understood. Kif18A (kinesin-8) localizes to the plus ends of the relatively slowly growing kinetochore fibers (K-fibers) and attenuates their dynamics, whereas Kif4A (kinesin-4) localizes to mitotic chromatin and suppresses the growth of highly dynamic, nonkinetochore microtubules. Although Kif18A and Kif4A similarly suppress microtubule growth in vitro, it remains unclear whether microtubule-attenuating motors control the lengths of K-fibers and nonkinetochore microtubules through a common mechanism. To address this question, we engineered chimeric kinesins that contain the Kif4A, Kif18B (kinesin-8), or Kif5B (kinesin-1) motor domain fused to the C-terminal tail of Kif18A. Each of these chimeric kinesins localizes to K-fibers; however, K-fiber length control requires an activity specific to kinesin-8s. Mutational studies of Kif18A indicate that this control depends on both its C-terminus and a unique, positively charged surface loop, called loop2, within the motor domain. These data support a model in which microtubule-attenuating kinesins are molecularly “tuned” to control the dynamics of specific subsets of spindle microtubules.     

A synthetic ancestral kinesin-13 depolymerizes microtubules faster than any natural depolymerizing kinesin

The activity of a kinesin is largely determined by the approximately 350 residue motor domain, and this region alone is sufficient to classify a kinesin as a member of a particular family. The kinesin-13 family are a group of microtubule depolymerizing kinesins and are vital regulators of microtubule length. Kinesin-13s are critical to spindle assembly and chromosome segregation in both mitotic and meiotic cell division and play crucial roles in cilium length control and neuronal development. To better understand the evolution of microtubule depolymerization activity, we created a synthetic ancestral kinesin-13 motor domain. This phylogenetically inferred ancestral motor domain is the sequence predicted to have existed in the common ancestor of the kinesin-13 family. Here we show that the ancestral kinesin-13 motor depolymerizes stabilized microtubules faster than any previously tested depolymerase. This potent activity is more than an order of magnitude faster than the most highly studied kinesin-13, MCAK and allows the ancestral kinesin-13 to depolymerize doubly stabilized microtubules and cause internal breaks within microtubules. These data suggest that the ancestor of the kinesin-13 family was a ‘super depolymerizer’ and that members of the kinesin-13 family have evolved away from this extreme depolymerizing activity to provide more controlled microtubule depolymerization activity in extant cells.     

Multi-talented MCAK: Microtubule depolymerizer with a strong grip

Microtubule-depolymerizing motor proteins regulate microtubule dynamics during chromosome segregation, but whether they can independently grip the ends of shrinking kinetochore microtubules has remained unresolved. MCAK, a member of the kinesin-13 motor protein family, is now shown to grip microtubules on its own and harness the forces of microtubule disassembly.     

A nonmotor microtubule binding site in kinesin-5 is required for filament crosslinking and sliding

Kinesin-5, a widely conserved motor protein required for assembly of the bipolar mitotic spindle in eukaryotes, forms homotetramers with two pairs of motor domains positioned at opposite ends of a dumbbell-shaped molecule [1-3]. It has long been assumed that this configuration of motor domains is the basis of kinesin-5's ability to drive relative sliding of microtubules [2, 4, 5]. Recently, it was suggested that in addition to the N-terminal motor domain, kinesin-5 also has a nonmotor microtubule binding site in its C terminus [6]. However, it is not known how the nonmotor domain contributes to motor activity, or how a kinesin-5 tetramer utilizes a combination of four motor and four nonmotor microtubule binding sites for its microtubule organizing functions. Here we show, in single molecule assays, that kinesin-5 homotetramers require the nonmotor C terminus for crosslinking and relative sliding of two microtubules. Remarkably, this domain enhances kinesin-5's microtubule binding without substantially reducing motor activity. Our?results suggest that tetramerization of kinesin-5's low-processivity motor domains is not sufficient for microtubule sliding because the motor domains alone are unlikely to?maintain persistent microtubule crosslinks. Rather, kinesin-5 utilizes nonmotor microtubule binding sites to tune its microtubule attachment dynamics, enabling it to efficiently align and sort microtubules during metaphase spindle assembly and function.     

The Arabidopsis CLASP gene encodes a microtubule-associated protein involved in cell expansion and division

Controlling microtubule dynamics and spatial organization is a fundamental requirement of eukaryotic cell function. Members of the ORBIT/MAST/CLASP family of microtubule-associated proteins associate with the plus ends of microtubules, where they promote the addition of tubulin subunits into attached kinetochore fibers during mitosis and stabilize microtubules in the vicinity of the plasma membrane during interphase. To date, nothing is known about their function in plants. Here, we show that the Arabidopsis thaliana CLASP protein is a microtubule-associated protein that is involved in both cell division and cell expansion. Green fluorescent protein-CLASP localizes along the full length of microtubules and shows enrichment at growing plus ends. Our analysis suggests that CLASP promotes microtubule stability. clasp-1 T-DNA insertion mutants are hypersensitive to microtubule-destabilizing drugs and exhibit more sparsely populated, yet well ordered, root cortical microtubule arrays. Overexpression of CLASP promotes microtubule bundles that are resistant to depolymerization with oryzalin. Furthermore, clasp-1 mutants have aberrant microtubule preprophase bands, mitotic spindles, and phragmoplasts, indicating a role for At CLASP in stabilizing mitotic arrays. clasp-1 plants are dwarf, have significantly reduced cell numbers in the root division zone, and have defects in directional cell expansion. We discuss possible mechanisms of CLASP function in higher plants.     

Role and regulation of kinesin-8 motors through the cell cycle

Members of the kinesin-8 motor family play a central role in controlling microtubule length throughout the eukaryotic cell cycle. Inactivation of kinesin-8 causes defects in cell polarity during interphase and astral and mitotic spindle length, metaphase chromosome alignment, timing of anaphase onset and accuracy of chromosome segregation. Although the biophysical mechanism by which kinesin-8 molecules influence microtubule dynamics has been studied extensively in a variety of species, a consensus view has yet to emerge. One reason for this might be that some members of the kinesin-8 family can associate to other microtubule-associated proteins, cell cycle regulatory proteins and other kinesin family members. In this review we consider how cell cycle specific modification and its association to other regulatory proteins may modulate the function of kinesin-8 to enable it to function as a master regulator of microtubule dynamics.     

The p21-activated kinase, Shk1, is required for proper regulation of microtubule dynamics in the fission yeast, Schizosaccharomyces pombe

The p21-activated kinase, Shk1, is required for the proper establishment of cell polarity in the fission yeast, Schizosaccharomyces pombe. We showed recently that loss of the essential Shk1 inhibitor, Skb15, causes significant spindle defects in fission yeast, thus implicating Shk1 as a potential regulator of microtubule dynamics. Here, we show that cells deficient in Shk1 function have malformed interphase microtubules and mitotic microtubule spindles, are hypersensitive to the microtubule-destabilizing drug thiabendazole (TBZ) and cold sensitive for growth. TBZ treatment causes a downregulation of Shk1 kinase activity, which increases rapidly after release of cells from the drug, thus providing a correlation between Shk1 kinase function and active microtubule polymerization. Consistent with a role for Shk1 as a regulator of microtubule dynamics, green fluorescent protein (GFP)-Shk1 fusion proteins localize to interphase microtubules and mitotic microtubule spindles, as well as to cell ends and septum-forming regions of fission yeast cells. We show that loss of Tea1, a cell end- and microtubule-localized protein previously implicated as a regulator of microtubule dynamics in fission yeast, exacerbates the growth and microtubule defects resulting from partial loss of Shk1 and that Shk1 localizes to illicit growth tips produced by tea1 mutant cells. Our results demonstrate that Shk1 is required for the proper regulation of microtubule dynamics in fission yeast and implicate Tea1 as a potential Shk1 regulator.     

Mcp1p tracks microtubule plus ends to destabilize microtubules at cell tips

Microtubule plus ends are dynamically regulated by a wide variety of proteins for performing diverse cellular functions. Here, we show that the fission yeast Schizosaccharomyces pombe uncharacterized protein mcp1p is a microtubule plus-end tracking protein which depends on the kinesin-8 klp6p for transporting along microtubules towards microtubule plus ends. In the absence of mcp1p, microtubule catastrophe and rescue frequencies decrease, leading to an increased dwell time of microtubule plus ends at cell tips. Thus, these findings suggest that mcp1p may synergize with klp6p at microtubule plus-ends to destabilize microtubules.     

In situ visualization of a simple bipartite kinetochore with a single microtubule attachment in Giardia intestinalis (Metamonada)

To understand general features in evolution of kinetochore organization, investigating a wide range of mitotic mechanisms in various non-model eukaryotes is necessary. A binucleate flagellate Giardia intestinalis is a representative of highly divergent eukaryotic lineage of Metamonads. FIB/SEM tomography was used to investigate ultrastructural details of its mitotic architecture, including kinetochores. Giardia undergoes semi-open mitosis, with the nuclear envelope remaining intact except for polar fenestrae, allowing microtubules to enter the nucleoplasm. At the onset of mitosis, the nuclear envelope bends inward, forming a concave depression at the spindle poles. Spindle microtubules emanate from a cytoplasmic fuzzy microtubule organizing center near the flagellar basal bodies. Kinetochoral microtubules enter the nucleoplasm and bind to kinetochores. A small bipartite kinetochore composed of a dense inner disk, approximately 46 nm in diameter, and a two-armed outer fork, is attached to just one microtubule. To our knowledge, this is the first in situ evidence of a one-microtubule attachment to a kinetochore, which could represent a basic eukaryotic situation.     

Dynein tethers and stabilizes dynamic microtubule plus ends

Microtubules undergo alternating periods of growth and shortening, known as dynamic instability. These dynamics allow microtubule plus ends to explore cellular space. The "search and capture" model posits that selective anchoring of microtubule plus ends at the cell cortex may contribute to cell polarization, spindle orientation, or targeted trafficking to specific cellular domains. Whereas cytoplasmic dynein is primarily known as a minus-end-directed microtubule motor for organelle transport, cortically localized dynein has been shown to capture and tether microtubules at the cell periphery in both dividing and interphase cells. To explore the mechanism involved, we developed a minimal in vitro system, with dynein-bound beads positioned near microtubule plus ends using an optical trap. Dynein induced a significant reduction in the lateral diffusion of microtubule ends, distinct from the effects of other microtubule-associated proteins such as kinesin-1 and EB1. In assays with dynamic microtubules, dynein delayed barrier-induced catastrophe of microtubules. This effect was ATP dependent, indicating that dynein motor activity was required. Computational modeling suggests that dynein delays catastrophe by exerting tension on individual protofilaments, leading to microtubule stabilization. Thus, dynein-mediated capture and tethering of microtubules at the cortex can lead to enhanced stability of dynamic plus ends.     

Mechanisms underlying the dual-mode regulation of microtubule dynamics by Kip3/kinesin-8

The kinesin-8 family of microtubule motors plays?a critical role in microtubule length control in cells. These motors have complex effects on microtubule dynamics: they destabilize growing microtubules yet stabilize shrinking microtubules. The budding yeast kinesin-8, Kip3, accumulates on plus ends of growing but not shrinking microtubules. Here we identify an essential role of the tail domain of Kip3 in mediating both its destabilizing and its stabilizing activities. The Kip3 tail promotes Kip3's accumulation at the plus ends and facilitates the destabilizing effect of Kip3. However, the Kip3 tail also inhibits microtubule shrinkage and is required for promoting microtubule rescue by Kip3. These effects of the tail domain are likely to be mediated by the tubulin- and microtubule-binding activities that we describe. We propose a concentration-dependent model for the coordination of the destabilizing and stabilizing activities of Kip3 and discuss its relevance to cellular microtubule organization.     

Stepwise Reconstitution of Interphase Microtubule Dynamics in Permeabilized Cells and Comparison to Dynamic Mechanisms in Intact Cells

Microtubules in permeabilized cells are devoid of dynamic activity and are insensitive to depolymerizing drugs such as nocodazole. Using this model system we have established conditions for stepwise reconstitution of microtubule dynamics in permeabilized interphase cells when supplemented with various cell extracts. When permeabilized cells are supplemented with mammalian cell extracts in the presence of protein phosphatase inhibitors, microtubules become sensitive to nocodazole. Depolymerization induced by nocodazole proceeds from microtubule plus ends, whereas microtubule minus ends remain inactive. Such nocodazole-sensitive microtubules do not exhibit subunit turnover. By contrast, when permeabilized cells are supplemented with Xenopus egg extracts, microtubules actively turn over. This involves continuous creation of free microtubule minus ends through microtubule fragmentation. Newly created minus ends apparently serve as sites of microtubule depolymerization, while net microtubule polymerization occurs at microtubule plus ends. We provide evidence that similar microtubule fragmentation and minus end–directed disassembly occur at the whole-cell level in intact cells. These data suggest that microtubule dynamics resembling dynamics observed in vivo can be reconstituted in permeabilized cells. This model system should provide means for in vitro assays to identify molecules important in regulating microtubule dynamics. Furthermore, our data support recent work suggesting that microtubule treadmilling is an important mechanism of microtubule turnover.     

Dynamics of interphase microtubules in Schizosaccharomyces pombe

BACKGROUND: Microtubules in interphase Schizosaccharomyces pombe are essential for maintaining the linear growth habit of these cells. The dynamics of assembly and disassembly of these microtubules are so far uncharacterised. RESULTS: Live cell confocal imaging of alpha1 tubulin tagged with enhanced green fluorescent protein revealed longitudinally oriented, dynamically unstable interphase microtubule assemblies (IMAs). The IMAs were uniformly bright along their length apart from a zone of approximately doubly intense fluorescence commonly present close to their centres. The ends of each IMA switched from growth ( approximately 3.0 microm/min) to shrinkage ( approximately 4.5 microm/min) at 1.0 events per minute and from shrinkage to growth at 1.9 events per minute, and the two ends were equivalently dynamic, suggesting equivalent structure. We accordingly propose a symmetrical model for microtubule packing within the IMAs, in which microtubules are plus ends out and overlap close to the equator of the cell. IMAs may contain multiple copies of this motif; if so, then within each IMA end, the microtubule ends must synchronise catastrophe and rescue. When both ends of an IMA lodge in the hemispherical cell ends, the IMAs start to bend under compression and their overall growth rate is inhibited about twofold. Similar microtubule dynamics were observed in cells ranging in size from half to twice normal length. Patterned photobleaching indicated no detectable treadmilling or microtubule sliding during interphase. CONCLUSIONS: The consequence of the mechanisms described is continuous recruitment of microtubule ends to the ends of growing cells, supporting microtubule-based transport into the cell ends and qualitatively accounting for the essential role for microtubules in directing linear cell growth in S. pombe.     

Localization of the Kinesin-like Protein Xklp2 to Spindle Poles Requires a Leucine Zipper,a Microtubule-associated Protein,and Dynein

Xklp2 is a plus end–directed Xenopus kinesin-like protein localized at spindle poles and required for centrosome separation during spindle assembly in Xenopus egg extracts. A glutathione-S-transferase fusion protein containing the COOH-terminal domain of Xklp2 (GST-Xklp2-Tail) was previously found to localize to spindle poles (Boleti, H., E. Karsenti, and I. Vernos. 1996. Cell. 84:49–59). Now, we have examined the mechanism of localization of GST-Xklp2-Tail. Immunofluorescence and electron microscopy showed that Xklp2 and GST-Xklp2-Tail localize specifically to the minus ends of spindle pole and aster microtubules in mitotic, but not in interphase, Xenopus egg extracts. We found that dimerization and a COOH-terminal leucine zipper are required for this localization: a single point mutation in the leucine zipper prevented targeting. The mechanism of localization is complex and two additional factors in mitotic egg extracts are required for the targeting of GST-Xklp2-Tail to microtubule minus ends: (a) a novel 100-kD microtubule-associated protein that we named TPX2 (Targeting protein for Xklp2) that mediates the binding of GST-Xklp2-Tail to microtubules and (b) the dynein–dynactin complex that is required for the accumulation of GST-Xklp2-Tail at microtubule minus ends. We propose two molecular mechanisms that could account for the localization of Xklp2 to microtubule minus ends.     

Toward reconstitution of in vivo microtubule dynamics in vitro

The transition from interphase to mitosis is marked by a dramatic change in microtubule dynamics resulting in the reorganization of the microtubule network that culminates in mitotic spindle formation. While the molecular basis for this change in microtubule organization remains obscure, it is currently thought that a balance in the activity of microtubule stabilizing and destabilizing factors regulates how dynamic cellular microtubules are. By mixing the microtubule stabilizer XMAP215 and the microtubule destabilizer XKCM1, reconstitution of in vivo-like microtubule dynamics has now been achieved in vitro.     

A NIMA-related kinase,CNK4, regulates ciliary stability and length

NIMA-related kinases (Nrks or Neks) have emerged as key regulators of ciliogenesis. In human, mutations in Nek1 and Nek8 cause cilia-related disorders. The ciliary functions of Nrks are mostly revealed by genetic studies; however, the underlying mechanisms are not well understood. Here we show that a Chlamydomonas Nrk, CNK4, regulates ciliary stability and length. CNK4 is localized to the basal body region and the flagella. The cnk4-null mutant exhibited long flagella, with formation of flagellar bulges. The flagella gradually became curled at the bulge formation site, leading to flagellar loss. Electron microscopy shows that the curled flagella involved curling and degeneration of axonemal microtubules. cnk4 mutation resulted in flagellar increases of IFT trains, as well as its accumulation at the flagellar bulges. IFT speeds were not affected, however, IFT trains frequently stalled, leading to reduced IFT frequencies. These data are consistent with a model in which CNK4 regulates microtubule dynamics and IFT to control flagellar stability and length.