Structural and luminescence properties of Y2‐xGeMoO8:REx (RE = Eu,Tb) phosphors

Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors were synthesized using a facile sol–gel method. The morphology and structure of the phosphors were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD); while their luminescent properties were investigated by photoluminescence (PL) spectrometry. Our results reveal that all of these Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors adopted the tetragonal phase, belonging to Scheelite (CaWO₄) structure. The obtained YGeMoO₈:Eu phosphors exhibit a strong emission in the red light range which can be assigned to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ when it is excited at 459 nm. Under 392 and 489 nm excitation, the YGeMoO₈:Tb phosphors present predominant green emission (⁵D₄ → ⁷F₅) at 540 nm. The highest emission of the phosphors can be achieved by adjusting the doping concentration to be 0.25 for Eu³⁺ and 0.15 for Tb³⁺, respectively. The promising luminescence properties of these materials indicate that they can be potentially applied to white‐light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Impact of temperature on Na2Sr(PO4)F:Eu3+ phosphor

In this article, we report the synthesis of Na₂Sr_1‐x(PO₄)F:Eu_x phosphor via a combustion method. The influence of different annealing temperatures on the photoluminescence properties was investigated. The phosphor was excited at both 254 and 393 nm. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors emit strong orange and red color at 593 and 612 nm, respectively, under both excitation wavelengths. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors annealed at 1050°C showed stronger emission intensity compared with 600, 900 and 1200°C. Moreover, Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphor was found to be more intense when compared with commercial Y₂O₃:Eu³⁺ phosphor. Copyright © 2013 John Wiley & Sons, Ltd.     

Luminescence in Li3Al2(PO4)3:Eu2+

A series of efficient Li₃Al₂(PO₄)₃:Eu²⁺ novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃Al₂(PO₄)₃ phosphor were also investigated. The phosphors were characterized by X‐ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near‐ultraviolet excitation under 310 nm. The emission was observed for Li₃Al₂(PO₄)₃:Eu²⁺ phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu²⁺ was observed in Li₃Al₂(PO₄)₃:Eu²⁺ when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu²⁺ ion by Hg‐free excitation at 310 nm (i.e., solid‐state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoluminescence properties of a novel phosphor CaB2O4:Eu3+ under NUV excitation

The new borate phosphor CaB₂O₄:Eu³⁺ was synthesized by solid‐state method and their photoluminescence properties were investigated. The results show that the pure phase of CaB₂O₄ could be available at 900°C, CaB₂O₄:Eu³⁺ phosphor could be effectively excited by the near ultraviolet light (NUV) (392 nm), and the luminescent intensity of CaB₂O₄:Eu³⁺ phosphor reached to the highest when the doped‐Eu³⁺ content was 4 mol%. The emission spectra of CaB₂O₄:Eu³⁺ phosphor could exhibit red emission at 612 nm and orange emission at 588 nm, which are ascribed to the ⁵D₀–⁷F₂ and ⁵D₀–⁷F₁ transitions of Eu³⁺ ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of a novel blue emitting phosphor NaMgPO4:Eu2+

A novel blue‐emitting phosphor of Eu²⁺‐activated NaMgPO₄ was prepared by combustion‐assisted synthesis. Sodium dihydrogen phosphate and magnesium nitrate were used as the source of Na, P and Mg, respectively. The ratios of magnesium and phosphorus components that were dissolved into the combustion solution were changed from 1:1 to 1:1.3. Their effect on the crystallinities and photoluminescence spectra of the phosphor particles were investigated. The post‐heated phosphor particles had a broad excitation wavelength that ranged from 240 to 410 nm. The phosphor particles prepared from the combustion solution with a 1:1.2 ratio of magnesium to phosphorus had maximum emission intensity under ultraviolet excitation. The effect of doped Eu²⁺ concentration on the emission intensity of NaMgPO₄:Eu²⁺ was also investigated.     

Characterization and luminescence properties of CaMgSi2O6:Eu2+ blue phosphor

A blue CaMgSi₂O₆:Eu²⁺ phosphor was prepared by the solid‐state reaction method and the phosphor characterized in terms of crystal structure, particle size, photoluminescence (PL), thermoluminescence (TL) and mechanoluminescence (ML) properties using X‐ray diffraction (XRD), transmission electron microscopy (TEM), PL spectroscopy, TLD reader and ML impact technique. The XRD result shows that phosphor is formed in a single phase and has a monoclinic structure with the space group C2/c. Furthermore, the PL excitation spectra of Eu²⁺‐doped CaMgSi₂O₆ phosphor showed a strong band peak at 356 nm and the PL emission spectrum has a peak at 450 nm. The depths and frequency factors of trap centers were calculated using the TL glow curve by deconvolution method in which the trap depths were found to be 0.48 and 0.61 eV. The formation of CaMgSi₂O₆:Eu²⁺ phosphor was confirmed by Fourier transform infrared spectroscopy. The ML intensity increased linearly with the impact velocity of the piston used to deform the phosphor. It was shown that the local piezoelectricity‐induced electron bombardment model is responsible for the ML emission. Finally, the optical properties of CaMgSi₂O₆:Eu²⁺ phosphors are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence properties of red‐emission Mg4Nb2O9:Eu3+ phosphor

Red‐emitting Mg₄Nb₂O₉:Eu³⁺ phosphor is synthesized via a solid‐state reaction method in air, and its crystal structure and luminescence are investigated. The phosphor can be excited efficiently by ~ 395 nm light, coupled well with a ~ 395 nm near‐ultraviolet chip and emits red light at ~ 613 nm with sharp spectra due to ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion. Mg₄Nb₂O₉:Eu³⁺ phosphor sintered at 1350 ºC shows Commission international de I'Eclairage (CIE) chromaticity coordinates of x = 0.6354, y = 0.3592, and is a potential red‐emitting phosphor candidate for white light‐emitting diodes (W‐LEDs) under ~ 395 nm near‐ultraviolet LED chip excitation. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Eu3+‐activated Ba2Mg(PO4)2 phosphor

In this paper, we have reported the photoluminescence (PL) properties of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor synthesized using a wet chemical method. The preliminary scanning electron microscopy (SEM) investigation of the sample revealed irregular surface morphology with particle sizes in the 10–50 μm range. The strongest PL excitation peak was observed at 396 nm. The emission spectra indicated that this phosphor can be effectively excited by the 396 nm wavelength. Upon 396 nm excitation, the emission spectrum showed characteristics peaks located at 592 nm and 615 nm. These intense orange‐red emission peaks were obtained due to f→f transitions of Eu³⁺ ions. The emission peak at 592 nm is referred to as the magnetic dipole ⁵D₀→⁷F₁ transition and the emission peak at 615 nm corresponded to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺. The Commission Internationale de l’Eclairage (CIE) coordinates of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor were found to be (0.586, 0.412) for wavelength 592 nm and (0.680, 0.319) for wavelength 615 nm situated at the edge of the CIE diagram, indicating high colour purity of phosphors. Due to the high emission intensity and a good excitation profile, Eu³⁺‐doped Ba₂Mg(PO₄)₂ phosphor may be a promising orange‐red phosphor candidate for solid‐state lighting applications.     

Luminescence of Eu and Ce in K3Ca2(SO4)3F fluoride material

A new halophosphor K₃Ca₂(SO₄)₃ F activated by Eu or Ce and K₃Ca₂(SO₄)₃ F:Ce,Eu co‐doped halosulfate phosphor has been synthesized by the co‐precipitation method and characterized for its photoluminescence (PL). The PL emission spectra of the K₃Ca₂(SO₄)₃ F :Ce phosphor show emission at 334 nm when excited at 278 nm due to 5d → 4f transition of Ce³⁺ ions. In the K₃Ca₂(SO₄)₃ F:Eu lattice, Eu²⁺ (440 nm) as well as Eu³⁺ (596 nm and 615 nm) emissions have been observed showing ⁵D₀ → ⁷ F₁ and ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion, which is in the blue and red region of the visible spectrum respectively. The trivalent europium ion is very useful for studying the nature of metal coordination in various systems owing to its non‐degenerate emitting ⁵D₀ state. K₃Ca₂(SO₄)₃ F:Ce,Eu is suitable for Ce³⁺ → Eu²⁺ → Eu³⁺ energy transfer in which Ce³⁺and Eu²⁺ play the role of sensitizers and Eu²⁺ and Eu³⁺ act as the activators. The observations presented in this paper are relevant for lamp phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of the long‐persistence phosphor CaAl2O4:Eu2+, Dy3+, Nd3+ by combustion method and its luminescent properties

Calcium aluminate phosphor co‐doped Eu²⁺, Dy³⁺, Nd³⁺ is prepared by the combustion method. We study systemically the influences of the quantity of mixed Dy³⁺ ion, the quantity of flux H₃BO₃, the differences in dispersing methods between magnetic stirring and ultrasonic dispersing and the combustion temperature on the long‐persistence phosphor. The analytical results indicate that Dy³⁺ ion improves the properties of the phosphors CaAl₂O₄:Eu²⁺, Nd³⁺. The appropriate quantity of flux H₃BO₃ to reduce the forming temperature of the sample was determined. The monoclinic single phase of CaAl₂O₄ formed at 500°C and remained steady. The calcium aluminate co‐doped Eu²⁺, Dy³⁺, Nd³⁺ was synthesized by dispersal of the raw material using the ultrasonic method, and it had better optical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Sol–gel synthesis,characterization and luminescence properties of SrMgAl2SiO7:Eu2+ as a novel nanocrystalline phosphor

In this research, a new SrMgAl₂SiO₇:Eu²⁺ phosphor was synthesized via the sol–gel method. The phase‐forming processes were studied by thermogravimetric–differential thermal analysis and X‐ray diffraction technique. Scanning electron microscopy showed that there is uniform morphology and microstructure owing to the sol–gel route. Spectrophotometry and colorimetry analyses illustrated that, under short ultraviolet excitation, the main emission peak occurred at 421 nm and also a relatively pure blue color was observed that was ascribed to the 4f⁶5d¹(²D) → 4f⁷(⁸S_7/2) transition of Eu²⁺ with color coordination of x = 0.187, y = 0.077. Finally, it was found that the color and phase purity of the synthesized powder increased as calcinations time increased. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of cooling rate on the microstructure and luminescence properties of Sr2MgSi2O7:Eu2+,Dy3+ materials

Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow materials were prepared by a high‐temperature solid‐state reaction method with different cooling rates. The cooling rate had a slight effect on X‐ray diffraction patterns and photoluminescence performance, but significantly modified the grain boundaries and long afterglow properties of the Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ materials. When the cooling rate was 1°C/min, grains remained intact with clear grain boundaries. As the cooling rate increased from 1°C/min to 5°C/min, some grain boundaries became indistinguishable. The afterglow properties were optimized, presenting best performance at the cooling rate of 3°C/min. The trap state was investigated and illustrated through thermoluminescence curves. The depths of the traps of all the samples were unchanged, whereas densities changed to a large extent, leading to different afterglow properties. The retrapping process is discussed based on the afterglow curves.     

Mechanoluminescence properties of SrAl2O4:Eu2+ phosphor by combustion synthesis

In this paper, europium‐doped strontium aluminate (SrAl₂O₄:Eu²⁺) phosphors were synthesized using a combustion method with urea as a fuel at 600°C. The phase structure, particle size, surface morphology and elemental analysis were studied using X‐ray diffractometry (XRD), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FTIR) spectra. The EDX and FTIR spectra confirm the elements present in the SrAl₂O₄:Eu²⁺ phosphor. The optical properties of SrAl₂O₄:Eu²⁺ phosphors were investigated by photoluminescence (PL) and mechanoluminescence (ML). The excitation and emission spectra showed a broad band with peaks at 337 and 515 nm, respectively. The ML intensities of SrAl₂O₄:Eu²⁺ phosphor increased proportionally with the increase in the height of the mechanical load, which suggests that this phosphor could be used in stress sensors. The CIE colour chromaticity diagram and ML spectra confirm that the SrAl₂O₄:Eu²⁺ phosphor emitted green coloured light. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of Y(1‐x)Eu(x)(TTA)3(Phen) organic luminescent thin films

Yttrium is stoichiometrically doped into europium by mole percentage, during the synthesis of Y_(1‐x)Eu_(x)(TTA)₃(Phen), using solution techniques (where x = 0.2, 0.4, 0.5, 0.6 and 0.8, TTA = thenoyltrifluoroacetone and Phen = 1,10‐phenanthroline).These complexes were characterized using different techniques such as X‐ray diffraction, thermogravimetric/differential thermal analysis, optical absorption and emission spectra. Thin films of the doped Eu–Y complexes were prepared on a glass substrate under a high vacuum of 10^‐6 Torr. The photoluminescence spectra of these thin films were recorded by exciting the sample at a wavelength of 360 nm. The emission peak for all the synthesized complexes centered at 611 nm; maximum emission intensity was obtained from Y_0.6Eu_0.4 (TTA)₃(Phen). The results proved that these doped complexes are more economical than pure Eu(TTA)₃(Phen) and are best suited as red emissive material for energy‐efficient and eco‐friendly organic light‐emitting diodes and displays. Copyright © 2013 John Wiley & Sons, Ltd.     

Swift heavy ion induced structural and luminescence characterization of Y2O3:Eu3+ phosphor: a comparative study

We report a comparative study on structural and thermoluminescence modifications of Y₂O₃:Eu³⁺ phosphor induced by 150 MeV Ni⁷⁺, 120 MeV Ag⁹⁺ and 110 MeV Au⁸⁺ swift heavy ions (SHI) in the fluence range 1 × 10¹¹ to 1 × 10¹³ ions/cm². X‐Ray diffraction and transition electron microscopy studies confirm the loss of crystallinity of the phosphors after ion irradiation, which is greater in the case of Au ion irradiation. Structural refinement using the Rietveld method yields the various structural parameters of ion‐irradiated phosphors. Thermoluminescence glow curves of ion‐irradiated phosphors show a small shift in the position of the peaks, along with an increase in intensity with ion fluence. Stopping range of ions in Matter (SRIM) calculations were performed to correlate the change in thermoluminescence properties of various ion‐irradiated phosphors. It shows that the defects created by 110 MeV Au⁸⁺ ions are greater in number. Trapping parameters of ion‐irradiated phosphors were calculated from thermoluminescence data using various glow curve analysis methods. Copyright © 2013 John Wiley & Sons, Ltd.     

Luminescence studies on Al4B2O9:Eu2+ phosphor crystals

A novel blue‐emitting phosphor, Eu²⁺‐doping Al₄B₂O₉, was prepared via a modified solid‐state reaction. Al₄B₂O₉:Eu²⁺ nanoparticles with diameters varying in a range from 20 to 50 nm were obtained using urea as an auxiliary reagent at the optimum temperature of 850°C. The crystallization and particle sizes of Al₄B₂O₉:Eu²⁺ were investigated using powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence (PL) results showed that Al₄B₂O₉:Eu²⁺ phosphor could be efficiently excited by the ultraviolet region from 240 to 410 nm, exhibiting bright blue emission. Further investigation on concentration‐dependent emission spectra indicated that the Al_3.997B₂O₉:Eu²⁺_0.003 phosphor exhibited the strongest luminescent, and the relative PL intensity decreased with increasing Eu²⁺ concentration due to concentration quenching. In addition, the concentration quenching for the one‐Eu‐site emission centers was caused by the electric multipole–multipole interaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of temperature on intense green emitting Na2Ca(PO4)F:Mn2+ phosphor

An intense green luminescent Na₂Ca(PO₄)F:Mn²⁺ phosphor has been prepared at high temperature by reduction treatment in a charcoal environment. The emission band of Mn²⁺ was obtained at around 522 nm (green) under 259 nm excitation. Enhancement in emission intensity arising from the thermal treatment is reported. The intense emission of the spectrum was assigned to electronic transitions ⁴T₁ → ⁶A₁ of Mn²⁺ ions. Intense PL emission suggested that temperature employed plays an important role in the present matrix. X‐ray diffraction pattern, photoluminescence and morphology by SEM of the host lattice of phosphors at different temperatures have been reported in this paper. The results obtained show that the present phosphor has potential for application in green emitting phosphors for the lamp industry. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of Dy3+ or Eu2+ co‐activator on a BaCa(SO4)2:Ce3+ mixed alkaline earth sulfate phosphor

The individual emission and energy transfer between Ce³⁺ and Eu²⁺ or Dy³⁺ in BaCa(SO₄)₂ mixed alkaline earth sulfate phosphor prepared using a co‐precipitation method is described. The phosphor was characterized by X‐ray diffraction (XRD) and photoluminescence (PL) studies and doped by Ce;Eu and Dy rare earths. All phosphors showed excellent blue–orange emission on excitation with UV light. PL measurements reveal that the emission intensity of Eu²⁺ or Dy³⁺ dopants is greater than when they are co‐doped with Ce³⁺. An efficient Ce³⁺ → Eu²⁺ [²T_2g(4f⁶5d) → ⁸S_7/2(4f₇)] and Ce³⁺ → Dy³⁺ (⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2) energy transfer takes place in the BaCa(SO₄)₂ host. A strong blue emission peak was observed at 462 nm for Eu²⁺ ions and an orange emission peak at 574 nm for Dy³⁺ ions. Hence, this phosphor may be used as a lamp phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on a novel SrZr2CaLa2O8:Eu3+ phosphor for lighting applications emitting direct white light

Direct white light emitting phosphors play a significant role in the display industry due to their ability to improve the quality, efficiency, and versatility of lighting sources used in most of the displays. The currently investigated phosphor SrZr₂CaLa₂O₈:Eu³⁺ was prepared by a conventional solid-state reaction method. It has been observed that the stoichiometric ratio of all precursors plays an important role in determining the characteristics of the final phosphor. From X-ray diffraction (XRD) analysis, the phosphor was observed to have a hexagonal phase and a crystal size of ~28 nm. Scanning electron microscopy (SEM) observations revealed a cluster of rod-like structures with an average diameter of ~0.2 μm. The excitation peak maximum observed at 280 nm is due to charge transfer between Eu³⁺-O²⁻ ions. The energy transitions ⁷F₀ → ⁵L₆ and ⁷F₀ → ⁵D₂ are responsible for the appearance of other excitation peaks at ultraviolet (UV) (395 nm), blue (~467 nm), green (~540 nm), orange (~590 nm), and red (~627 nm) attributed to ⁵D₀ → ⁷F_J (J = 0–4) transitions of europium ion (Eu³⁺). The Commercial International de I'Eclairage (CIE) chromaticity coordinates were estimated to be (0.37, 0.0.33) and (0.67, 0.33) for the emissions corresponding to 395 and 590 nm, respectively. The characteristic emissions of Eu³⁺ ions allow this novel phosphor to be used to generate direct white light in light-emitting diodes (LEDs), which is otherwise difficult to achieve in single-component systems.