The soluble methane monooxygenase gene cluster of the trichloroethylene-degrading methanotroph Methylocystis sp. strain M.

In methanotrophic bacteria, methane is oxidized to methanol by the enzyme methane monooxygenase (MMO). The soluble MMO enzyme complex from Methylocystis sp. strain M also oxidizes a wide range of aliphatic and aromatic compounds, including trichloroethylene. In this study, heterologous DNA probes from the type II methanotroph Methylosinus trichosporium OB3b were used to isolate souble MMO (sMMO) genes from the type II methanotroph Methylocystis sp. strain M. sMMO genes from strain M are clustered on the chromosome and show a high degree of identity with the corresponding genes from Methylosinus trichosporium OB3b. Sequencing and phylogenetic analysis of the 16S rRNA gene from Methylocystis sp. strain M have confirmed that it is most closely related to the type II methanotroph Methylocystis parvus OBBP, which, unlike Methylocystis sp. strain M, does not possess an sMMO. A similar phylogenetic analysis using the pmoA gene, which encodes the 27-kDa polypeptide of the particulate MMO, also places Methylocystis sp. strain M firmly in the genus Methylocystis. This is the first report of isolation and characterization of methane oxidation genes from methanotrophs of the genus Methylocystis.     

Quantitative and rapid detection of the trichloroethylene-degrading bacterium Methylocystis sp. M in groundwater by real-time PCR

We developed a method based on real-time PCR for the specific and rapid enumeration of a trichloroethylene-degrading methanotroph, Methylocystis sp. M, with the aim of monitoring the strain in groundwater. A primer set designed from the nucleotide sequence of the mmoC gene of a soluble methane monooxygenase (sMMO) gene cluster from Methylocystis sp. M was specific to amplify the DNA region from the strain and no PCR products were amplified with the sMMO gene clusters from six other methanotroph strains. The real-time PCR reliably quantified Methylocystis sp. M over at least five orders of magnitude (5x10(6) to 5x10(2 )cells/PCR tube, or 2x10(8) to 2x10(4 )cells/ml). Five cells of Methylocystis sp. M per PCR tube (2x10(2 )cells/ml) were detectable when the cells were suspended in distilled water. The concomitant presence of other methanotrophs in samples did not affect the reliability of enumeration; and recovery of the cells with a membrane filter enabled us to quantify cells of the strain in groundwater. This quantification procedure was completed within 3 h, including preparation time of environmental samples. We conclude that real-time PCR using the mmoC primer set can be used practically to analyze the behavior of Methylocystis sp. M at bioremediation sites.     

Sensitive quantitative detection of Ralstonia solanacearum in soil by the most probable number-polymerase chain reaction (MPN-PCR) method

We developed a sensitive quantitative assay for detecting Ralstonia solanacearum in soil by most probable number (MPN) analysis based on bio-PCR results. For development of the detection method, we optimized an elution buffer containing 5 g/L skim milk for extracting bacteria from soil and reducing contamination of polymerase inhibitors in soil extracts. Because R. solanacearum can grow in water without any added nutrients, we used a cultivation buffer in the culture step of the bio-PCR that contained only the buffer and antibiotics to suppress the growth of other soil microorganisms. To quantify the bacterial population in soil, the elution buffer was added to 10 g soil on a dry weight basis so that the combined weight of buffer, soil, and soil-water was 50 g; 5 mL of soil extract was assumed to originate from 1 g of soil. The soil extract was divided into triplicate aliquots each of 5 mL and 500, 50, and 5 μL. Each aliquot was diluted with the cultivation buffer and incubated at 35 °C for about 24 h. After incubation, 5 μL of culture was directly used for nested PCR. The number of aliquots showing positive results was collectively checked against the MPN table. The method could quantify bacterial populations in soil down to 3 cfu/10 g dried soil and was successfully applied to several types of soil. We applied the method for the quantitative detection of R. solanacearum in horticultural soils, which could quantitatively detect small populations (9.3 cfu/g), but the semiselective media were not able to detect the bacteria.     

Induction and enhancement of stress proteins in a trichloroethylene-degrading methanotrophic bacterium, Methylocystis sp. M

The responses of the trichloroethylene-degrading bacterium Methylocystis sp. M to six different water-pollutants, carbon starvation, and temperature-shock (heat and cold) were examined using 2-dimensional gel electrophoresis. Twenty-eight polypeptides were induced, and these stress-induced proteins were classified into three groups. Some of the chemically induced proteins were the same as those induced by carbon starvation and temperature-shock. Two of the polypeptides were induced by trichloroethylene. Trichloroethylene-stress protein synthesis required 1-2 h at a concentration of trichloroethylene that had no effect on growth. Furthermore, 25 stress-enhanced polypeptides were observed, and one of these was enhanced by trichloroethylene. Based on these results, we discuss applications of chemical-stress induction of proteins to establish effective bioremediation and bioassay by methanotrophs.     

Role of heterotrophic bacteria in complete mineralization of trichloroethylene by Methylocystis sp. strain M.

Biodegradation experiments with radioactively labeled trichloroethylene showed that 32% of the radioactive carbon was converted to glyoxylic acid, dichloroacetic acid and trichloroacetic acid and that the same percentage was converted to CO2 and CO after 140 h of incubation by a pure culture of a type II methane-utilizing bacterium, Methylocystis sp. strain M, isolated from a mixed culture, MU-81, in our laboratory. In contrast, these water-soluble (14C)trichloroethylene degradation products were completely or partially degraded further and converted to CO2 by the MU-81 mixed culture. This phenomenon was attributed to the presence of a heterotrophic bacterium (strain DA4), which was identified as Xanthobacter autotrophicus, in the MU-81 culture. The results indicate that the heterotrophic bacteria play an important role in complete trichloroethylene degradation by methanotrophs.     

Role of heterotrophic bacteria in complete mineralization of trichloroethylene by Methylocystis sp. strain M.

Biodegradation experiments with radioactively labeled trichloroethylene showed that 32% of the radioactive carbon was converted to glyoxylic acid, dichloroacetic acid and trichloroacetic acid and that the same percentage was converted to CO2 and CO after 140 h of incubation by a pure culture of a type II methane-utilizing bacterium, Methylocystis sp. strain M, isolated from a mixed culture, MU-81, in our laboratory. In contrast, these water-soluble (14C)trichloroethylene degradation products were completely or partially degraded further and converted to CO2 by the MU-81 mixed culture. This phenomenon was attributed to the presence of a heterotrophic bacterium (strain DA4), which was identified as Xanthobacter autotrophicus, in the MU-81 culture. The results indicate that the heterotrophic bacteria play an important role in complete trichloroethylene degradation by methanotrophs.     

Quantitative and Specific Detection of a Trichloroethylene-degrading Methanotroph,Methylocystis sp. Strain M,by a Most Probable Number-Polymerase Chain Reaction Method

We developed a rapid and specific enumeration method for a trichloroethylene-degrading methanotroph, Methylocystis sp. strain M, based on a most probable number-polymerase chain reaction method for monitoring the bacterium at bioremediation sites. The primers designed for the mmoC gene of the soluble methane monooxygenase gene cluster were specific to strain M. Recovery of the cells with a membrane filter enabled us to detect strain M in trichloroethylene-contaminated groundwater. We used the enumeration method to monitor the number of strain M cells in effluent from soil columns supplied with trichloroethylene-contaminated groundwater. The number of strain M cells in the effluent depended on the amount of the strain M inoculated and the number of cells measured by the most probable number-polymerase chain reaction method was correlated with that measured by a culture method. The detection limit for strain M in effluent detected by MPN-PCR method was 4 to 8×10² cells/ml.     

Methane and trichloroethylene oxidation by an estuarine methanotroph, Methylobacter sp. strain BB5.1.

An estuarine methanotroph was isolated from sediment enrichments and designated Methylobacter sp. strain BB5.1. In cells grown on medium with added copper, oxidation of methane and trichloroethylene occurred with similar Ks values, but the Vmax for trichloroethylene oxidation was only 0.1% of the methane oxidation Vmax. Cells grown on low-copper medium did not oxidize trichloroethylene and showed a variable rate of methane oxidation.     

Purification and Properties of a Soluble Methane Monooxygenase from Methylocystis sp. M

A soluble methane monooxygenase (sMMO: EC 1.14.13.25) was purified from a type II obligate methanotroph, Methylocystis sp. M. Ion exchange chromatography elution separated the sMMO into three components, I, II, and III. Components II and III were purified to homogeneity and were essential for the sMMO activity. Components II and III had molecular masses of approximately 233,000 and 39,000, respectively. Component II consisted of three subunits with molecular masses of 55,000, 44,000, and 21,000, which appeared to be present in stoichiometric amounts, suggesting a (αβγ)₂ configuration in the native protein. Component II contained 1–4 mol of iron and was considered to be a hydroxylase. Component III was a flavoprotein, which contained 1 mol of FAD as well as 1–2mol of iron. It catalyzed the reduction of K₃Fe(CN)₆ and 2,6-dichloroindophenol by NADH. Component I, which was partially purified and not essential for sMMO activity, stimulated the activity by about 11-fold. Its stimulation could be replaced by addition of Fe²⁺. The molecular mass of the partially purified component I was estimated to be from 35,000 to 40,000 based on gel filtration, which suggested the presence of a new type of regulatory protein of sMMO.     

Trichloroethylene degradation by cells of a methane-utilizing bacterium,Methylocystis sp. M,immobilized in calcium alginate

When Methylocystis sp. M cells were immobilized in calcium alginate, the resulting cell beads showed optimum trichloroethylene (TCE) degradation activity at pH 7.0 and 35°C. In comparison with free cells, the immobilized cells were more stable at low pH, and to some extent, at higher temperatures. Studies on the kinetics and the influence of cell density suggest that oxygen permeation was a rate-limiting step. Investigation of the storage stability and the optimum concentration of dissolved oxygen revealed that the TCE degradability was greater under anaerobic than aerobic conditions. Although a toxic effect caused by TCE was observed, methane seemed to restore activity, suggesting that the development of a two-step reactor system might be advantageous. The finding that the immobilized cells showed TCE degradation activity in actual groundwater suggests that TCE bioremediation could be achieved through the use of bioreactors with such cells.     

Comparison of most probable number-PCR and most probable number-foci detection method for quantifying infectious Cryptosporidium parvum oocysts in environmental samples

Microbial contamination of public water supplies is of significant concern, as numerous outbreaks, including Cryptosporidium, have been reported worldwide. Detection and enumeration of Cryptosporidium parvum oocysts in water supplies is important for the prevention of future cryptosporidiosis outbreaks. In addition to not identifying the oocyst species, the U.S. EPA Method 1622 does not provide information on oocyst viability or infectivity. As such, current detection strategies have been coupled with in vitro culture methods to assess oocyst infectivity. In this study, a most probable number (MPN) method was coupled with PCR (MPN-PCR) to quantify the number of infectious oocysts recovered from seeded raw water concentrates. The frequency of positive MPN-PCR results decreased as the oocyst numbers decreased. Similar results were observed when MPN was coupled to the foci detection method (MPN-FDM), which was done for comparison. For both methods, infectious oocysts were not detected below 10(3) seeded oocysts and the MPN-PCR and MPN-FDM estimates for each seed dose were generally within one-log unit of directly enumerated foci of infection. MPN-PCR estimates were 0.25, 0.54, 0 and 0.66 log(10) units higher than MPN-FDM estimates for the positive control, 10(5), 10(4) and 10(3) seed doses, respectively. The results show the MPN-PCR was the better method for the detection of infectious C. parvum oocysts in environmental water samples.     

Transport of mevalonate by Pseudomonas sp. strain M.

Pseudomonas sp. M, isolated from soil by elective culture on R,S-mevalonate as the sole source of carbon, possessed an inducible transport system for mevalonate. This high-affinity system had a pH optimum of 7.0, a temperature optimum of 30 degrees C, a Km for R,S-mevalonate of 88 microM, and a V max of 26 nmol of mevalonate transported per min/mg of cells (dry weight). Transport was energy dependent since azide, cyanide, or m-chlorophenylhydrazone caused complete cessation of transport activity. Transport of mevalonate was highly substrate specific. Of the 16 structural analogs of mevalonate tested, only acetoacetate, mevinolin, and mevaldehyde significantly inhibited transport. Growth of cells on mevalonate induced transport activity by 40- to 65-fold over that observed in cells grown on alternate carbon sources. A biphasic pattern for cell growth, as well as for induction of mevalonate transport activity, was observed when mevalonate was added to a culture actively growing on glucose. The induction of transport activity under these conditions began within 30 min after the addition of mevalonate and reached 60% of maximal activity during phase I. A further increase in mevalonate transport activity occurred during phase II of growth. Glucose was the preferred carbon source for growth during phase I, whereas mevalonate was preferred during phase II. Only one isomer of the R,S-mevalonate mixture appeared to be utilized, since growth ceased after 45 to 50% of the total mevalonate was depleted from the medium. However, nearly 30% of the preferred mevalonate isomer was depleted from the medium during phase I without significant metabolism to CO2. These results suggest that mevalonate or a mevalonate catabolite may accumulate in cells of Pseudomonas sp. M during phase I and that glucose metabolism may inhibit or repress the expression of enzymes further along the mevalonate catabolic pathway.     

Enumeration of petroleum-degrading marine and estuarine microorganisms by the most probable number method.

Several media designed for use in a most probable number (MPN) determination of petroleum-degrading microorganisms were compared. The best results, i.e., largest numbers, were obtained using a buffered (32 mM PO4=) liquid medium containing 1% hydrocarbon substrate. Of 104 presumptive oil degraders tested, 20 grew on oil agar medium but did not utilize oil or a mixture of pure paraffinic hydrocarbons (C10 to C16 n-alkanes) in liquid (MPN) medium. Visible turbidity in the liquid medium was correlated with hydrocarbon utilization. Counts of petroleum degraders obtained using liquid medium (MPN) were in most cases higher than those obtained on an oil-amended silica gel medium. Both procedures yield an estimation of oil degraders, and the oil-amended agar permits growth of organisms which do not degrade crude oil. All strains of oil-degrading microorganisms examined in this study were lipolytic, but the converse was not always true.     

Polymerase chain reaction as a sensitive and rapid method for specific detection of Mycoplasma pneumoniae in clinical samples

The fast diagnosis of Mycoplasma primary atypical pneumonia is impaired by the lack of routinely available culture methods for isolation of Mycoplasma pneumoniae from clinical specimens. Likewise, serological methods commonly used for diagnosis are insensitive and non-specific. In this study, we have established and applied the polymerase chain reaction (PCR) technique to detect M. pneumoniae DNA in clinical samples originating from the respiratory tract. The PCR results were compared with those from culture and serology tests. To standardize the detection of M. pneumoniae by PCR, we first used DNA from culture grown organisms and clinical samples seeded with M. pneumoniae. PCR amplification was performed with M. pneumoniae-specific primers to amplify 144, 153 and 631 bp DNA fragments by using primer pairs MP5-1/MP5-2, P1-178/P1-331 and P1-178/P1-809, respectively. The amplification of the 631 bp DNA fragment was found to be most sensitive for the detection of M. pneumoniae. Using the most sensitive PCR, a total of 47 respiratory specimens from patients suspected of community acquired pneumonia were tested. While none of the specimens were positive for M. pneumoniae in culture, 6 specimens gave positive results by PCR. In 4 out of the 5 PCR positive samples tested serologically, the results were supported by elevated levels of anti-mycoplasma IgG/IgM/IgA. Thus, these results suggest that PCR is the most sensitive method to detect M. pneumoniae in clinical specimens.     

Hydrogen utilization by Methylocystis sp. strain SC2 expands the known metabolic versatility of type IIa methanotrophs

Methane, a non-expensive natural substrate, is used by Methylocystis spp. as a sole source of carbon and energy. Here, we assessed whether Methylocystis sp. strain SC2 is able to also utilize hydrogen as an energy source. The addition of 2% H₂ to the culture headspace had the most significant positive effect on the growth yield under CH₄ (6%) and O₂ (3%) limited conditions. The SC2 biomass yield doubled from 6.41 (±0.52) to 13.82 (±0.69) mg cell dry weight per mmol CH₄, while CH₄ consumption was significantly reduced. Regardless of H₂ addition, CH₄ utilization was increasingly redirected from respiration to fermentation-based pathways with decreasing O₂/CH₄ mixing ratios. Theoretical thermodynamic calculations confirmed that hydrogen utilization under oxygen-limited conditions doubles the maximum biomass yield compared to fully aerobic conditions without H₂ addition. Hydrogen utilization was linked to significant changes in the SC2 proteome. In addition to hydrogenase accessory proteins, the production of Group 1d and Group 2b hydrogenases was significantly increased in both short- and long-term incubations. Both long-term incubation with H₂ (37 d) and treatments with chemical inhibitors revealed that SC2 growth under hydrogen-utilizing conditions does not require the activity of complex I. Apparently, strain SC2 has the metabolic capacity to channel hydrogen-derived electrons into the quinone pool, which provides a link between hydrogen oxidation and energy production. In summary, H₂ may be a promising alternative energy source in biotechnologically oriented methanotroph projects that aim to maximize biomass yield from CH_4, such as the production of high-quality feed protein.     

Molecular construction and characterization of nif mutants of the obligate methanotroph Methylosinus sp. strain 6.

We describe here a method for constructing mutants in bacteria that are not amenable to mutant isolation by conventional means. A one-step marker exchange procedure was used to construct nitrogen fixation (nif) mutants of the obligate methane-utilizing bacterium Methylosinus sp. strain 6, using transposon 5 (Tn5)-containing nif genes cloned into pBR325. The resultant mutants appeared to contain defects in nif structural genes, and DNA hybridization analysis showed that although one out of five had apparently been produced as a result of double-crossover homologous recombination, a variety of molecular events had led to the production of the other four mutants.     

Development of a genus specific primer set for detection of Leishmania parasites by polymerase chain reaction

Abstract We have compared the sequences of a major class of kinetoplast DNA (kDNA) minicircle (pLURkE3) of Leishmania strain UR6 with other minicircle sequences from different Leishmania species. Alignment of these sequences allowed the selection of a pair of oligonucleotides suitable as primers in polymerase chain reaction (PCR) which is specific for Leishmania parasites. PCR with this genus-specific primer set is capable of detecting 1 femtogram of kDNA. These primers have been tested with kDNAs from both old world and new world Leishmania species. The results indicate that the primers may be suitable for detection of any kind of leishmaniasis.     

Development of a specific polymerase chain reaction assay for the detection of Basidiobolus

The etiology of chronic diarrhea is complex in humans and animals. It is always necessary to evaluate a list of differential diagnosis, including bacteria, protozoa and fungi. Basidiobolomycosis is a fungal disease reported sporadically worldwide, mainly caused by B. ranarum, a frequent organism found in soil or in the intestine and skin of lizards and frogs. It is an opportunistic pathogen that causes infections characterized by granulomatous lesions in the subcutaneous tissues as well as in the intestinal wall in humans and animals. In this work we have developed a PCR technique to differentiate Basidiobolus from other causes of intestinal disease in dogs and humans. To test the specificity of the PCR assay we included closely related organisms, common intestinal microbiota and pathogenic organisms, such as Aspergillus, Candida, Cryptosporidium, Escherichia, Giardia, Mucor, Proteus, Rhizopus and Salmonella. Pythium insidiosum, which cause clinically similar disease in dogs but require a different treatment. Only Basidiobolus was positive to the PCR assay.     

Quantitative detection of Proteus species by real-time polymerase chain reaction using SYBR Green I

A SYBR Green real-time polymerase chain reaction (PCR) method for rapid detection of Proteus species was developed and evaluated. Of 322 clinical and food samples tested, 75 samples were positive for Proteus species by using conventional PCR and real-time PCR assays. The results were consistent with standard culture methods and the Vitek auto-microbe system, indicating a 100 % specificity obtained by both PCR assays. For the real-time PCR method, the minimum detectable level was 10 colony forming units (CFU) /ml, which was a 10³ multiple higher than the conventional PCR method. Correlation coefficients of standard curves which were constructed using the threshold cycle (Ct) versus copy numbers of Proteus showed good linearity (R ²?=?0.997). In conclusion, several significant advantages such as higher sensitivity and rapidness were observed by using the SYBR Green real-time PCR method for identifying Proteus species.