Evaluation of Fluorophores to Label SNAP-Tag Fused Proteins for Multicolor Single-Molecule Tracking Microscopy in Live Cells

Single-molecule tracking has become a widely used technique for studying protein dynamics and their organization in the complex environment of the cell. In particular, the spatiotemporal distribution of membrane receptors is an active field of study due to its putative role in the regulation of signal transduction. The SNAP-tag is an intrinsically monovalent and highly specific genetic tag for attaching a fluorescent label to a protein of interest. Little information is currently available on the choice of optimal fluorescent dyes for single-molecule microscopy utilizing the SNAP-tag labeling system. We surveyed 6 green and 16 red excitable dyes for their suitability in single-molecule microscopy of SNAP-tag fusion proteins in live cells. We determined the nonspecific binding levels and photostability of these dye conjugates when bound to a SNAP-tag fused membrane protein in live cells. We found that only a limited subset of the dyes tested is suitable for single-molecule tracking microscopy. The results show that a careful choice of the dye to conjugate to the SNAP-substrate to label SNAP-tag fusion proteins is very important, as many dyes suffer from either rapid photobleaching or high nonspecific staining. These characteristics appear to be unpredictable, which motivated the need to perform the systematic survey presented here. We have developed a protocol for evaluating the best dyes, and for the conditions that we evaluated, we find that Dy 549 and CF 640 are the best choices tested for single-molecule tracking. Using an optimal dye pair, we also demonstrate the possibility of dual-color single-molecule imaging of SNAP-tag fusion proteins. This survey provides an overview of the photophysical and imaging properties of a range of SNAP-tag fluorescent substrates, enabling the selection of optimal dyes and conditions for single-molecule imaging of SNAP-tagged fusion proteins in eukaryotic cell lines.     

A SNAP-tagged derivative of HIV-1--a versatile tool to study virus-cell interactions

Fluorescently labeled human immunodeficiency virus (HIV) derivatives, combined with the use of advanced fluorescence microscopy techniques, allow the direct visualization of dynamic events and individual steps in the viral life cycle. HIV proteins tagged with fluorescent proteins (FPs) have been successfully used for live-cell imaging analyses of HIV-cell interactions. However, FPs display limitations with respect to their physicochemical properties, and their maturation kinetics. Furthermore, several independent FP-tagged constructs have to be cloned and characterized in order to obtain spectral variations suitable for multi-color imaging setups. In contrast, the so-called SNAP-tag represents a genetically encoded non-fluorescent tag which mediates specific covalent coupling to fluorescent substrate molecules in a self-labeling reaction. Fusion of the SNAP-tag to the protein of interest allows specific labeling of the fusion protein with a variety of synthetic dyes, thereby offering enhanced flexibility for fluorescence imaging approaches.Here we describe the construction and characterization of the HIV derivative HIV(SNAP), which carries the SNAP-tag as an additional domain within the viral structural polyprotein Gag. Introduction of the tag close to the C-terminus of the matrix domain of Gag did not interfere with particle assembly, release or proteolytic virus maturation. The modified virions were infectious and could be propagated in tissue culture, albeit with reduced replication capacity. Insertion of the SNAP domain within Gag allowed specific staining of the viral polyprotein in the context of virus producing cells using a SNAP reactive dye as well as the visualization of individual virions and viral budding sites by stochastic optical reconstruction microscopy. Thus, HIV(SNAP) represents a versatile tool which expands the possibilities for the analysis of HIV-cell interactions using live cell imaging and sub-diffraction fluorescence microscopy.     

DNA labeling in living cells.

BACKGROUND: Live cell fluorescence microscopy experiments often require visualization of the nucleus and the chromatin to determine the nuclear morphology or the localization of nuclear compartments. METHODS: We compared five different DNA dyes, TOPRO-3, TOTO-3, propidium iodide, Hoechst 33258, and DRAQ5, to test their usefulness in live cell experiments with continuous imaging and photobleaching in widefield epifluorescence and confocal laser scanning microscopy. In addition, we compared the DNA stainings with fluorescent histones as an independent fluorescent label to mark chromatin. RESULTS: From the dyes tested, only Hoechst and DRAQ5 could be used to stain DNA in living cells. However, DRAQ5 had several advantages, namely low photobleaching, labeling of the chromatin compartments comparable to that of H2B-GFP fusion proteins, and deep red excitation/emission compatible with available genetically encoded fluorescent proteins such as C/G/YFP or mRFP. CONCLUSIONS: The DNA dye DRAQ5 is well suited for chromatin visualization in living cells and can easily be combined with other fluorophores with blue to orange emission.     

Stimulated Emission Depletion Nanoscopy of Living Cells Using SNAP-Tag Fusion Proteins

We show far-field fluorescence nanoscopy of different structural elements labeled with an organic dye within living mammalian cells. The diffraction barrier limiting far-field light microscopy is outperformed by using stimulated emission depletion. We used the tagging protein hAGT (SNAP-tag), which covalently binds benzylguanine-substituted organic dyes, for labeling. Tetramethylrhodamine was used to image the cytoskeleton (vimentin and microtubule-associated protein 2) as well as structures located at the cell membrane (caveolin and connexin-43) with a resolution down to 40 nm. Comparison with structures labeled with the yellow fluorescent protein Citrine validates this labeling approach. Nanoscopic movies showing the movement of connexin-43 clusters across the cell membrane evidence the capability of this technique to observe structural changes on the nanoscale over time. Pulsed or continuous-wave lasers for excitation and stimulated emission depletion yield images of similar resolution in living cells. Hence fusion proteins that bind modified organic dyes expand widely the application range of far-field fluorescence nanoscopy of living cells.     

Fluorescent Labeling of COS-7 Expressing SNAP-tag Fusion Proteins for Live Cell Imaging

SNAP-tag and CLIP-tag protein labeling systems enable the specific, covalent attachment of molecules, including fluorescent dyes, to a protein of interest in live cells. These systems offer a broad selection of fluorescent substrates optimized for a range of imaging instrumentation. Once cloned and expressed, the tagged protein can be used with a variety of substrates for numerous downstream applications without having to clone again. There are two steps to using this system: cloning and expression of the protein of interest as a SNAP-tag fusion, and labeling of the fusion with the SNAP-tag substrate of choice. The SNAP-tag is a small protein based on human O⁶-alkylguanine-DNA-alkyltransferase (hAGT), a DNA repair protein. SNAP-tag labels are dyes conjugated to guanine or chloropyrimidine leaving groups via a benzyl linker. In the labeling reaction, the substituted benzyl group of the substrate is covalently attached to the SNAP-tag. CLIP-tag is a modified version of SNAP-tag, engineered to react with benzylcytosine rather than benzylguanine derivatives. When used in conjunction with SNAP-tag, CLIP-tag enables the orthogonal and complementary labeling of two proteins simultaneously in the same cells.Download video file.^{(47M, mov)}     

Imaging of RNA in live cells

Fluorescence microscopy and molecular tagging technologies have ushered in a new era in our understanding of protein localization and function in cells. This review summarizes recent efforts to extend some of these methods (and to create new ones) to imaging of RNA in live cells. Both fluorescent proteins and hybridization probes allow noncovalent labeling of specific RNA molecules with fluorescent dyes that allow detection and tracking in real time.     

Fluorophores for live cell imaging of AGT fusion proteins across the visible spectrum

O6-alkylguanine-DNA alkyltransferase (AGT) fusion proteins can be specifically and covalently labeled with fluorescent O6-benzylguanine (O6-BG) derivatives for multicolor live cell imaging approaches. Here, we characterize several new BG fluorophores suitable for in vivo AGT labeling that display fluorescence emission maxima covering the visible spectrum from 472 to 673 nm, thereby extending the spectral limits set by fluorescent proteins. We show that the photostability of the cell-permeable dyes BG Rhodamine Green (BG505) and CP tetramethylrhodamine (CP-TMR) is in the range of enhanced green fluorescent protein (EGFP) and monomeric red fluorescent protein (mRFP), and that BG diethylaminomethyl coumarin (BGDEAC), a derivative of coumarin, is even more stable than enhanced cyan fluorescent protein (ECFP). Due to the increasing number of new BG derivatives with interesting fluorescence properties, such as far-red emission, fluorescence labeling of AGT fusion proteins is becoming a versatile alternative to existing live cell imaging approaches.     

Autofluorescent proteins in single-molecule research: applications to live cell imaging microscopy

The spectral and photophysical characteristics of the autofluorescent proteins were analyzed and compared to flavinoids to test their applicability for single-molecule microscopy in live cells. We compare 1) the number of photons emitted by individual autofluorescent proteins in artificial and in vivo situations, 2) the saturation intensities of the various autofluorescent proteins, and 3) the maximal emitted photons from individual fluorophores in order to specify their use for repetitive imaging and dynamical analysis. It is found that under relevant conditions and for millisecond integration periods, the autofluorescent proteins have photon emission rates of approximately 3000 photons/ms (with the exception of DsRed), saturation intensities from 6 to 50 kW/cm2, and photobleaching yields from 10(-4) to 10(-5). Definition of a detection ratio led to the conclusion that the yellow-fluorescent protein mutant eYFP is superior compared to all the fluorescent proteins for single-molecule studies in vivo. This finding was subsequently used for demonstration of the applicability of eYFP in biophysical research. From tracking the lateral and rotational diffusion of eYFP in artificial material, and when bound to membranes of live cells, eYFP is found to dynamically track the entity to which it is anchored.     

Optical lock-in detection of FRET using synthetic and genetically encoded optical switches

The Förster resonance energy transfer (FRET) technique is widely used for studying protein interactions within live cells. The effectiveness and sensitivity of determining FRET, however, can be reduced by photobleaching, cross talk, autofluorescence, and unlabeled, endogenous proteins. We present a FRET imaging method using an optical switch probe, Nitrobenzospiropyran (NitroBIPS), which substantially improves the sensitivity of detection to <1% FRET efficiency. Through orthogonal optical control of the colorful merocyanine and colorless spiro states of the NitroBIPS acceptor, donor fluorescence can be measured both in the absence and presence of FRET in the same FRET pair in the same cell. A SNAP-tag approach is used to generate a green fluorescent protein-alkylguaninetransferase fusion protein (GFP-AGT) that is labeled with benzylguanine-NitroBIPS. In vivo imaging studies on this green fluorescent protein-alkylguaninetransferase (GFP-AGT) (NitroBIPS) complex, employing optical lock-in detection of FRET, allow unambiguous resolution of FRET efficiencies below 1%, equivalent to a few percent of donor-tagged proteins in complexes with acceptor-tagged proteins.     

Sample Preparation and Imaging Conditions Affect mEos3.2 Photophysics in Fission Yeast Cells

Photoconvertible fluorescent proteins (PCFPs) are widely used in super-resolution microscopy and studies of cellular dynamics. However, our understanding of their photophysics is still limited, hampering their quantitative application. For example, we do not know the optimal sample preparation methods or imaging conditions to count protein molecules fused to PCFPs by single-molecule localization microscopy in live and fixed cells. We also do not know how the behavior of PCFPs in live cells compares with fixed cells. Therefore, we investigated how formaldehyde fixation influences the photophysical properties of the popular green-to-red PCFP mEos3.2 in fission yeast cells under a wide range of imaging conditions. We estimated photophysical parameters by fitting a three-state model of photoconversion and photobleaching to the time course of fluorescence signal per yeast cell expressing mEos3.2. We discovered that formaldehyde fixation makes the fluorescence signal, photoconversion rate, and photobleaching rate of mEos3.2 sensitive to the buffer conditions likely by permeabilizing the yeast cell membrane. Under some imaging conditions, the time-integrated mEos3.2 signal per yeast cell is similar in live cells and fixed cells imaged in buffer at pH 8.5 with 1 mM DTT, indicating that light chemical fixation does not destroy mEos3.2 molecules. We also discovered that 405-nm irradiation drove some red-state mEos3.2 molecules to enter an intermediate dark state, which can be converted back to the red fluorescent state by 561-nm illumination. Our findings provide a guide to quantitatively compare conditions for imaging mEos3.2-tagged molecules in yeast cells. Our imaging assay and mathematical model are easy to implement and provide a simple quantitative approach to measure the time-integrated signal and the photoconversion and photobleaching rates of fluorescent proteins in cells.     

Rational approach to select small peptide molecular probes labeled with fluorescent cyanine dyes for in vivo optical imaging

We demonstrate that the structure of carbocyanine dyes, which are commonly used to label small peptides for molecular imaging and not the bound peptide, controls the rate of extravasation from blood vessels to tissue. By examining several near-infrared (NIR) carbocyanine fluorophores, we demonstrate a quantitative correlation between the binding of a dye to albumin, a model plasma protein, and the rate of extravasation of the probe into tissue. Binding of the dyes was measured by fluorescence quenching of the tryptophans in albumin and was found to be inversely proportional to the rate of extravasation. The rate of extravasation, determined by kurtosis from longitudinal imaging studies using rodent ear models, provided a basis for quantitative measurements. Structure-activity studies aimed at evaluating a representative library of NIR fluorescent cyanine probes showed that hydrophilic dyes with binding constants several orders of magnitude lower than their hydrophobic counterparts have much faster extravasation rate, establishing a foundation for rational probe design. The correlation provides a guideline for dye selection in optical imaging and a method to verify if a certain dye is optimal for a specific molecular imaging application.     

Understanding Protein Mobility in Bacteria by Tracking Single Molecules

Protein diffusion is crucial for understanding the formation of protein complexes in vivo and has been the subject of many fluorescence microscopy studies in cells; however, such microscopy efforts are often limited by low sensitivity and resolution. During the past decade, these limitations have been addressed by new super-resolution imaging methods, most of which rely on single-particle tracking and single-molecule detection; these methods are revolutionizing our understanding of molecular diffusion inside bacterial cells by directly visualizing the motion of proteins and the effects of the local and global environment on diffusion. Here we review key methods that made such experiments possible, with particular emphasis on versions of single-molecule tracking based on photo-activated fluorescent proteins. We also discuss studies that provide estimates of the time a diffusing protein takes to locate a target site, as well as studies that examined the stoichiometries of diffusing species, the effect of stable and weak interactions on diffusion, and the constraints of large macromolecular structures on the ability of proteins and their complexes to access the entire cytoplasm.     

Investigating intracellular dynamics of FtsZ cytoskeleton with photoactivation single-molecule tracking

Using photoactivatable fluorescent protein as an intracellular protein label for single-molecule tracking offers several advantages over the traditional methods. Here we demonstrate the technique of photoactivation single-molecule tracking by investigating the mobility dynamics of intracellular FtsZ protein molecules in live Escherichia coli cells. FtsZ is a prokaryotic cytoskeleton protein (a homolog of tubulin) and plays important roles in cytokinesis. We demonstrate two heterogeneous subpopulations of FtsZ molecules with distinct diffusional dynamics. The FtsZ molecules forming the Z-rings near the center of the cell were mostly stationary, consistent with the assumption that they are within polymeric filamentous structures. The rest of the FtsZ molecules, on the other hand, undergo Brownian motion spanning the whole cell length. Surprisingly, the diffusion of FtsZ is spatially restricted to helical-shaped regions, implying an energy barrier for free diffusion. Consistently, the measured mean-square displacements of FtsZ showed anomalous diffusion characteristics. These results demonstrated the feasibility and advantages of photoactivation single-molecule tracking, and suggested new levels of complexity in the prokaryotic membrane organization.     

Fluorescence-mediated analysis of mitochondrial preprotein import in vitro

Mitochondrial biogenesis is a crucial element of the functional maintenance of a eukaryotic cell. The organelle must import the majority of its proteins from the cytosol where they are synthesized as precursors. In vitro import assays have been developed in which isolated mitochondria are incubated with precursor proteins, that are generated either by in vitro translation systems or by expression and purification as recombinant proteins. The detection of imported proteins is performed by autoradiography or by Western blot. We have now established a novel detection system for imported precursor proteins that is based on fluorescent labeling. We constructed a mitochondrial preprotein containing a C-terminal SNAP-tag that can label itself with a single fluorescein molecule in an enzymatic reaction. The fluorescent preproteins were efficiently imported into isolated mitochondria and showed kinetic behavior similar to that of standard preproteins. The fluorescence detection was sensitive and significantly faster than other comparable procedures. We also showed that precursor proteins containing a SNAP-tag domain could be successfully labeled in a postimport reaction in intact mitochondria. In summary, the use of a reporter domain modified with a fluorescent dye provides a novel, sensitive, and fast detection method to analyze the properties of the mitochondrial import reaction in vitro.     

ReAsH/FlAsH Labeling and Image Analysis of Tetracysteine Sensor Proteins in Cells

Fluorescent proteins and dyes are essential tools for the study of protein trafficking, localization and function in cells. While fluorescent proteins such as green fluorescence protein (GFP) have been extensively used as fusion partners to proteins to track the properties of a protein of interest¹, recent developments with smaller tags enable new functionalities of proteins to be examined in cells such as conformational change and protein-association ^{2, 3}. One small tag system involves a tetracysteine motif (CCXXCC) genetically inserted into a target protein, which binds to biarsenical dyes, ReAsH (red fluorescent) and FlAsH (green fluorescent), with high specificity even in live cells ². The TC/biarsenical dye system offers far less steric constraints to the host protein than fluorescent proteins which has enabled several new approaches to measure conformational change and protein-protein interactions ^4-7. We recently developed a novel application of TC tags as sensors of oligomerization in cells expressing mutant huntingtin, which when mutated aggregates in neurons in Huntington disease ⁷. Huntingtin was tagged with two fluorescent dyes, one a fluorescent protein to track protein location, and the second a TC tag which only binds biarsenical dyes in monomers. Hence, changes in colocalization between protein and biarsenical dye reactivity enabled submicroscopic oligomer content to be spatially mapped within cells. Here, we describe how to label TC-tagged proteins fused to a fluorescent protein (Cherry, GFP or CFP) with FlAsH or ReAsH in live mammalian cells and how to quantify the two color fluorescence (Cherry/FlAsH, CFP/FlAsH or GFP/ReAsH combinations).Download video file.^{(77M, mov)}     

Pin-Hole Array Correlation Imaging: Highly Parallel Fluorescence Correlation Spectroscopy

In this work, we describe pin-hole array correlation imaging, a multipoint version of fluorescence correlation spectroscopy, based upon a stationary Nipkow disk and a high-speed electron multiplying charged coupled detector. We characterize the system and test its performance on a variety of samples, including 40 nm colloids, a fluorescent protein complex, a membrane dye, and a fluorescence fusion protein. Our results demonstrate that pin-hole array correlation imaging is capable of simultaneously performing tens or hundreds of fluorescence correlation spectroscopy-style measurements in cells, with sufficient sensitivity and temporal resolution to study the behaviors of membrane-bound and soluble molecules labeled with conventional chemical dyes or fluorescent proteins.     

Saturation fluorescence labeling of proteins for proteomic analyses

We present here an optimized and cost-effective approach to saturation fluorescence labeling of protein thiols for proteomic analysis. We investigated a number of conditions and reagent concentrations, including the disulfide reducing agent tris(2-carboxyethyl)phosphine (TCEP), pH, incubation time, linearity of labeling, and saturating dye/protein thiol ratio with protein standards to gauge specific and nonspecific labeling. Efficacy of labeling under these conditions was quantified using specific fluorescence estimation, defined as the ratio of fluorescence pixel intensities and Coomassie-stained pixel intensities of bands after digital imaging. Factors leading to specific versus nonspecific labeling in the presence of thiourea are also discussed. We found that reproducible saturation of available Cys residues of the proteins used as labeling standards (human carbonic anhydrase I, enolase, and α-lactalbumin) is achieved at 50- to 100-fold excess of the uncharged maleimide-functionalized BODIPY dyes over Cys. We confirmed our previous findings, and those of others, that the maleimide dyes are not affected by the presence of 2 M thiourea. Moreover, we established that 2 mM TCEP used as reductant is optimal. We also established that labeling is optimal at pH 7.5 and complete after 30 min. Low nonspecific labeling was gauged by the inclusion of non-Cys-containing proteins (horse myoglobin and bovine carbonic anhydrase) to the labeling mixture. We also showed that the dye exhibits little to no effect on the two-dimensional mobilities of labeled proteins derived from cells.     

Characterization of Fluorescent Proteins for Three- and Four-Color Live-Cell Imaging in S. cerevisiae

Saccharomyces cerevisiae are widely used for imaging fluorescently tagged protein fusions. Fluorescent proteins can easily be inserted into yeast genes at their chromosomal locus, by homologous recombination, for expression of tagged proteins at endogenous levels. This is especially useful for incorporation of multiple fluorescent protein fusions into a single strain, which can be challenging in organisms where genetic manipulation is more complex. However, the availability of optimal fluorescent protein combinations for 3-color imaging is limited. Here, we have characterized a combination of fluorescent proteins, mTFP1/mCitrine/mCherry for multicolor live cell imaging in S. cerevisiae. This combination can be used with conventional blue dyes, such as DAPI, for potential four-color live cell imaging.     

特异性的蛋白小分子荧光探针及其标记技术

活体蛋白荧光标记技术已经被广泛应用于蛋白质功能的可视化研究中。荧光蛋白常被用来研究蛋白质在生物体内的表达和定位,但由于它本身体积比较大,往往会影响目标蛋白的生物活性。特异性的小分子荧光探针以其体积小、膜透性好、背景噪音低以及制备方便的优点成为蛋白质研究的一个有力工具。本文将简要介绍近几年来各类特异性小分子蛋白荧光探针的研究进展。