Sequential DEXAS: a method for obtaining DNA sequences from genomic DNA and blood in one reaction

Sequential DEXAS (direct exponential amplification and sequencing), a one step amplification and sequencing procedure that allows accurate, inexpensive and rapid DNA sequence determination directly from genomic DNA, is described. This method relies on the simultaneous use of two DNA polymerases that differ both in their ability to incorporate dideoxynucleotides and in the time at which they are activated during the reaction. One enzyme, which incorporates deoxynucleotides and performs amplification of the target DNA sequence, is supplied in an active state whereas the other enzyme, which incorporates dideoxynucleotides and performs the sequencing reaction, is supplied in an inactive state but becomes activated by a temperature step during the thermocycling. Thus, in the initial stage of the reaction, target amplification occurs, while in the second stage the sequencing reaction takes place. We show that Sequential DEXAS yields high quality sequencing results directly from genomic DNA as well as directly from human blood without any prior isolation or purification of DNA.     

Amplification of bacterial genomic DNA by the polymerase chain reaction and direct sequencing after asymmetric amplification: application to the study of periplasmic permeases.

The polymerase chain reaction (PCR) has been used to amplify DNA fragments by using eucaryotic genomic DNA as a template. We show that bacterial genomic DNA can be used as a template for PCR amplification. We demonstrate that DNA fragments at least as large as 4,400 base pairs can be amplified with fidelity and that the amplified DNA can be used as a substrate for most operations involving DNA. We discuss problems inherent in the direct sequencing of the amplified product, one of the important exploitations of this methodology. We have solved the problems by developing an "asymmetric amplification" method in which one of the oligonucleotide primers is used in limiting amounts, thus allowing the accumulation of single-stranded copies of only one of the DNA strands. As an illustration of the use of PCR in bacteria, we have amplified, sequenced, and subcloned several DNA fragments carrying mutations in genes of the histidine permease operon. These mutations are part of a preliminary approach to studying protein-protein interactions in transport, and their nature is discussed.     

Sequencing PCR DNA amplified directly from a bacterial colony

We show that PCR product asymmetrically amplified directly from a bacterial colony can be sequenced to yield results as good as those obtained when purified template DNA is used for the PCR amplification step. With either template, greater than 300 nucleotides can be read from a typical sequencing reaction. Taq DNA polymerase was used for both the PCR amplification and sequencing reactions.     

Cloning and direct sequencing of plant promoters using primer-adapter mediated PCR on DNA coupled to a magnetic solid phase.

A method that allows amplification and direct sequencing or cloning of an unknown DNA segment flanked by a known sequence is described using barley genomic DNA. The method avoids the step of circularization necessary for inverse PCR by ligation of primer-adapters to restricted genomic DNA. Specificity is achieved in the first amplification step; linear PCR with a biotinylated primer complementary to the known flanking sequence (primer 1-B) produces a single-stranded product that is purified employing streptavidin-coated magnetic beads. After this step, which removes genomic DNA, two rounds of exponential PCR are performed, first with the adapter-primer and primer 1 and second with primer 1 substituted by a nested primer 2. If the second primer is biotinylated, the product can be sequenced directly using solid-phase sequencing. We have employed this method to sequence directly and to clone the promoters of two late embryogenesis-abundant (Lea) genes (B19.4 and B19.3) from barley. Lea B19.4 and B19.3 encode putative desiccation-protective proteins that act in the final stages of embryogenesis and have previously been cloned as cDNAs. We demonstrate here that their proximal promoter regions are very similar (80% identity) and that both contain putative abscisic acid-responsive elements.     

A strategy to study gene polymorphism by direct sequence analysis of cosmid clones and amplified genomic DNA

A two-step strategy is described here to rapidly analyze gene-sequence variation or polymorphism. First, DNA sequences flanking the coding region of the gene to be analyzed are determined directly from a cosmid clone, including the gene, using the modified T7 DNA polymerase and sequencing primers based on the cDNA sequence of the gene. Second, the identified gene-flanking sequences are used to design amplification primers for the polymerase chain reaction (PCR) to permit amplification of DNA segments of up to 1 kilobase in genomic DNA from multiple individuals. These amplified DNA segments are directly sequenced using the thermostable Taq DNA polymerase.     

High sensitivity mapping of methylated cytosines.

An understanding of DNA methylation and its potential role in gene control during development, aging and cancer has been hampered by a lack of sensitive methods which can resolve exact methylation patterns from only small quantities of DNA. We have now developed a genomic sequencing technique which is capable of detecting every methylated cytosine on both strands of any target sequence, using DNA isolated from fewer than 100 cells. In this method, sodium bisulphite is used to convert cytosine residues to uracil residues in single-stranded DNA, under conditions whereby 5-methylcytosine remains non-reactive. The converted DNA is amplified with specific primers and sequenced. All the cytosine residues remaining in the sequence represent previously methylated cytosines in the genome. The work described has defined procedures that maximise the efficiency of denaturation, bisulphite conversion and amplification, to permit methylation mapping of single genes from small amounts of genomic DNA, readily available from germ cells and early developmental stages.     

A strategy for single site PCR amplification of dsDNA: priming digested cloned or genomic DNA from an anchor-modified restriction site and a short internal sequence

Amplification of dsDNA by polymerase chain reaction (PCR) has been limited to those instances in which segments of known sequence flank the fragment to be amplified. A strategy for the PCR amplification of cloned or genomic dsDNA that necessitates sequence information from only a single short segment (single site PCR) has been devised. The region of known sequence may be located at any position within or adjacent to the segment to be amplified. The basic procedure for amplification consists of 1) digestion of dsDNA with one or more restriction enzymes, 2) ligation with a universal anchor adaptor and 3) PCR amplification using an anchor primer and the primer for the single site of known sequence. The anchor adaptor is designed in such a way as to facilitate the amplification of only those fragments containing the sequence of interest. We have demonstrated the utility of this technique by specifically amplifying and directly sequencing antibody variable region genes from cloned dsDNA and from genomic DNA.     

Testing the Reproducibility of Multiple Displacement Amplification on Genomes of Clonal Endosymbiont Populations

The multiple displacement amplification method has revolutionized genomic studies of uncultured bacteria, where the extraction of pure DNA in sufficient quantity for next-generation sequencing is challenging. However, the method is problematic in that it amplifies the target DNA unevenly, induces the formation of chimeric reads and also amplifies contaminating DNA. Here, we have tested the reproducibility of the multiple displacement amplification method using serial dilutions of extracted genomic DNA and intact cells from the cultured endosymbiont Bartonella australis. The amplified DNA was sequenced with the Illumina sequencing technology, and the results were compared to sequence data obtained from unamplified DNA in this study as well as from a previously published genome project. We show that artifacts such as the extent of the amplification bias, the percentage of chimeric reads and the relative fraction of contaminating DNA increase dramatically for the smallest amounts of template DNA. The pattern of read coverage was reproducibly obtained for samples with higher amounts of template DNA, suggesting that the bias is non-random and genome-specific. A re-analysis of previously published sequence data obtained after amplification from clonal endosymbiont populations confirmed these predictions. We conclude that many of the artifacts associated with the use of the multiple displacement amplification method can be alleviated or much reduced by using multiple cells as the template for the amplification. These findings should be particularly useful for researchers studying the genomes of endosymbionts and other uncultured bacteria, for which a small clonal population of cells can be isolated.     

Direct DNA sequence determination from total genomic DNA.

It is possible to perform a combined amplification and sequencing reaction ('DEXAS') directly from complex DNA mixtures by using two thermostable DNA polymerases, one that favours the incorporation of deoxynucleotides over dideoxynucleotides, and one which has a decreased ability to discriminate between these two nucleotide forms. During cycles of thermal denaturation, annealing and extension, the former enzyme primarily amplifies the target sequence whereas the latter enzyme primarily performs a sequencing reaction. This method allows the determination of single-copy nuclear DNA sequences from amounts of human genomic DNA comparable to those used to amplify nucleotide sequences by the polymerase chain reaction. Thus, DNA sequences can be easily determined directly from total genomic DNA.     

Nucleotide sequence determination of point mutations at the mouse HPRT locus using in vitro amplification of HPRT mRNA sequences

Cloning of genomic and cDNA sequences of mammalian genes has made it possible to analyze at the molecular level mutations induced by radiation and chemical mutagens. The X-linked HPRT gene is very suitable for these investigations because in addition to the availability of cell culture systems, HPRT mutants can also be obtained directly from the lymphocytes of mouse and man. Recently a new technique has been introduced by Saiki and co-workers which allows the cloning and sequencing of small specific DNA segments from total genomic DNA after in vitro amplification of those segments up to 200,000-fold (Saiki et al., 1985). We have adapted this so-called polymerase chain reaction (PCR) procedure in such a way that the entire mouse HPRT-coding region could be amplified, cloned and sequenced. Instead of genomic DNA, we have used RNA as template in the PCR reactions. This allows us to detect point mutations in HPRT exon sequences in a very efficient way, since the DNA sequence of all 9 exons, which are scattered over 34 kb of DNA, can be obtained from only one amplification experiment. We studied the nature of 3 N-ethyl-N-nitrosourea (ENU)-induced HPRT mutants from cultured mouse lymphoma cells. One contains an A:T----G:C transition, the second an A:T----T:A transversion, whereas the third mutant is the result of abnormal splicing events, probably due to a mutation in the 3' splice site of the first intron.     

Strategies for automated sequencing of human mitochondrial DNA directly from PCR products.

A rapid, robust and sensitive method has been developed for the amplification and direct sequencing of human mitochondrial DNA. A 403-bp hypervariable segment was amplified by two successive rounds of nested PCR. This was then sequenced by the dideoxy chain termination method using dye-labeled universal sequencing primers in conjunction with an automated DNA sequencer. This paper describes the assessment of four different strategies for this amplification and sequencing process. Optimal results were obtained by immobilizing the biotinylated PCR product on Dynabeads followed by solid-phase sequencing with Sequenase. Degraded samples and those containing trace amounts of DNA such as extracts from hair shafts can be analyzed by this method.     

PCR and DNA sequencing

Specific DNA segments defined by the sequence of two oligonucleotides can be enzymatically amplified up to a millionfold using the polymerase chain reaction (PCR). One of the most significant uses of this technique is for generation of sequencing templates, either from cloned inserts or directly from genomic DNA. To avoid the problem of reassociation of the linear DNA strands in the sequencing reaction, ssDNA templates can be produced directly in the PCR or generated directly from dsDNA by enzymatic treatment, electrophoretic separation or affinity purification. By combining PCR with direct sequencing, both the amplification and the sequencing reaction can be performed in the same vial. Finally, use of fluorescently labeled terminators or sequencing primers will allow the whole procedure to be amenable to complete automation.     

Single-cell genomic sequencing using Multiple Displacement Amplification

Single microbial cells can now be sequenced using DNA amplified by the Multiple Displacement Amplification (MDA) reaction. The few femtograms of DNA in a bacterium are amplified into micrograms of high molecular weight DNA suitable for DNA library construction and Sanger sequencing. The MDA-generated DNA also performs well when used directly as template for pyrosequencing by the 454 Life Sciences method. While MDA from single cells loses some of the genomic sequence, this approach will greatly accelerate the pace of sequencing from uncultured microbes. The genetically linked sequences from single cells are also a powerful tool to be used in guiding genomic assembly of shotgun sequences of multiple organisms from environmental DNA extracts (metagenomic sequences).     

Sequence specific generation of a DNA panhandle permits PCR amplification of unknown flanking DNA.

We present a novel method for the PCR amplification of unknown DNA that flanks a known segment directly from human genomic DNA. PCR requires that primer annealing sites be present on each end of the DNA segment that is to be amplified. In this method, known DNA is placed on the uncharacterized side of the sequence of interest via DNA polymerase mediated generation of a PCR template that is shaped like a pan with a handle. Generation of this template permits specific amplification of the unknown sequence. Taq (DNA) polymerase was used to form the original template and to generate the PCR product. 2.2 kb of the beta-globin gene, and 657 bp of the 5' flanking region of the cystic fibrosis transmembrane conductance regulator gene, were amplified directly from human genomic DNA using primers that initially flank only one side of the region amplified. This method will provide a powerful tool for acquiring DNA sequence information.     

Direct solid phase sequencing of genomic and plasmid DNA using magnetic beads as solid support.

Approaches to direct solid phase sequencing of genomic and plasmid DNA have been developed using magnetic beads, coated with streptavidin, as solid support. The DNA is immobilized through selective incorporation of biotin into one of the strands. A single stranded template, suitable for sequencing, is obtained through strand-specific elution. Using this concept, in vitro amplified plasmid DNA and chromosomal DNA were sequenced directly from single colonies. The solid phase approach ensures that the amplification and the sequencing reactions can be performed under optimal conditions. The system was found to be suitable for sequencing using both isotope- and fluorescent-labelled primers.     

Development of reliable PCR-based markers linked to downy mildew resistance genes in lettuce

Summary Sequence characterized amplified regions (SCARs) were derived from eight random amplified polymorphic DNA (RAPD) markers linked to disease resistance genes in lettuce. SCARs are PCR-based markers that represent single, genetically defined loci that are identified by PCR amplification of genomic DNA with pairs of specific oligonucleotide primers; they may contain high-copy, dispersed genomic sequences within the amplified region. Amplified RAPD products were cloned and sequenced. The sequence was used to design 24-mer oligonucleotide primers for each end. All pairs of SCAR primers resulted in the amplification of single major bands the same size as the RAPD fragment cloned. Polymorphism was either retained as the presence or absence of amplification of the band or appeared as length polymorphisms that converted dominant RAPD loci into codominant SCAR markers. This study provided information on the molecular basis of RAPD markers. The amplified fragment contained no obvious repeated sequences beyond the primer sequence. Five out of eight pairs of SCAR primers amplified an alternate allele from both parents of the mapping population; therefore, the original RAPD polymorphism was likely due to mismatch at the primer sites.     

Direct PCR sequencing of dystrophin polymorphic CACA alleles after purification to remove shadow bands.

A method is described that allows the sequencing of polymerase chain reaction (PCR) products containing CACA repeats. The method was tested using a DNA polymorphism that exists at the 3' end of the dystrophin gene. This polymorphism consists of a variation in the length of a CACA dinucleotide repeat. Four alleles from a total of 16 individuals were sequenced at this locus after the DNA sequence had been amplified by the PCR. Five examples of each of the common alleles were sequenced. For each allele all five sequences were the same. The only example of a rare allele was also sequenced. The PCR products of DNA sequences containing dinucleotide repeats consist of a number of bands differing by 2 bp below the most intense main band. Previously, direct sequencing of the PCR products lead to ambiguities and smearing at and above the CACA repeat. In this paper, the main PCR band was cut out of a sequencing gel and directly sequenced to give a clear DNA sequence. Our results indicate that for a particular allele, all individuals had exactly the same DNA sequence. This implies that with the appropriate choice of oligonucleotide primers, polymorphisms could be detected without electrophoresis.     

Isothermal strand-displacement amplification applications for high-throughput genomics

Amplification of source DNA is a nearly universal requirement for molecular biology applications. The primary methods currently available to researchers are limited to in vivo amplification in Escherichia coli hosts and the polymerase chain reaction. Rolling-circle DNA replication is a well-known method for synthesis of phage genomes and recently has been applied as rolling circle amplification (RCA) of specific target sequences as well as circular vectors used in cloning. Here, we demonstrate that RCA using random hexamer primers with 29 DNA polymerase can be used for strand-displacement amplification of different vector constructs containing a variety of insert sizes to produce consistently uniform template for end-sequencing reactions. We show this procedure to be especially effective in a high-throughput plasmid production sequencing process. In addition, we demonstrate that whole bacterial genomes can be effectively amplified from cells or small amounts of purified genomic DNA without apparent bias for use in downstream applications, including whole genome shotgun sequencing.     

AFLP: a new technique for DNA fingerprinting.

A novel DNA fingerprinting technique called AFLP is described. The AFLP technique is based on the selective PCR amplification of restriction fragments from a total digest of genomic DNA. The technique involves three steps: (i) restriction of the DNA and ligation of oligonucleotide adapters, (ii) selective amplification of sets of restriction fragments, and (iii) gel analysis of the amplified fragments. PCR amplification of restriction fragments is achieved by using the adapter and restriction site sequence as target sites for primer annealing. The selective amplification is achieved by the use of primers that extend into the restriction fragments, amplifying only those fragments in which the primer extensions match the nucleotides flanking the restriction sites. Using this method, sets of restriction fragments may be visualized by PCR without knowledge of nucleotide sequence. The method allows the specific co-amplification of high numbers of restriction fragments. The number of fragments that can be analyzed simultaneously, however, is dependent on the resolution of the detection system. Typically 50-100 restriction fragments are amplified and detected on denaturing polyacrylamide gels. The AFLP technique provides a novel and very powerful DNA fingerprinting technique for DNAs of any origin or complexity.