Thermosensitive vector derived from RP1 plasmid for detection of transposable elements

The involvement of the transposable DNA element of E. coli K12 chromosome in integrative recombination of RP1 plasmid was studied. Using temperature sensitive for replication plasmid RP1ts12--the derivative of RP1 which contains mutated transposon Tnl, it was shown that integration of RP1 into host chromosome and Hfr formation may occur according to a mechanism mediated by chromosome IS-elements. Plasmids that are desintegrated from the chromosome of these Hfrs contain discrete DNA segments (IS-elements) and possess elevated frequency of integration into chromosome of rec+ cells. The latter was used for selection of RP1ts12 recombinants carrying chromosome IS. For identification of IS involved in RP1 integration the number of independent RP1ts 12 recombinants was subjected to restriction and heteroduplex analysis. By analysing recombinants integrated into bacterial chromosome with frequency 5 X 10(-3), a new IS-element of E. coli K12 designated IS111 was discovered. IS111-element is about 1500bp of length, contains Smal, Pst1 and BamH1 restriction endonuclease sites and was found in the same position on the plasmid RP1 in two different orientations. IS-elements that have been revealed in a number of other RP1ts12 recombinants were preliminary identified as IS1-like elements. One recombinants plasmid was found to have an IS5-like elements. The activity of IS-elements inserted into RP1ts12 in recA-dependent integrative recombination was estimated. From the data of absolute and relative RP1ts12 integration frequencies mediated by IS111, IS1- and IS5-like elements a conclusion was made about the absence of E. coli K12 chromosome IS-elements in RP1 plasmid. The Hfr-formation and chromosomal gene transfer by recombinant plasmids RP1ts12: IS111 were studied. The possibility to use insertion RP1ts12 derivatives for the estimation of copies number, mapping and definition of orientation of IS-elements in bacterial chromosome and the possibilities for detection of transposable DNA elements using RP1ts12 in a wide range of gram-negative bacteria are discussed.     

Transposition of IS 117, the 2.5 kb Streptomyces coelicolor A3(2) 'minicircle': roles of open reading frames and origin of tandem insertions

IS 117 is a 2527 bp transposable element from Streptomyces coelicolor A3(2) with a circular transposition intermediate. Disruption of 0RF1 of IS 117, presumed to encode a transposase, abolished transposition. Deletion or mutation of 0RF2 and 0RF3, which overlap each other on opposite strands of IS 117, caused a c. 20-fold reduction in integration frequency of the circular form of IS 117 into the Streptomyces lividans chromosome or into the preferred chromosomal target site cloned on a plasmid in transformation experiments. In contrast, inactivation of ORF2/3 did not significantly influence transposition of IS 117 derivatives from an already integrated state in the chromosome to the preferred target site cloned on a plasmid. 0RF2 mutants apparently excised readily from the S. lividans chromosome, whereas excision of integrated wild-type IS 117 derivatives to yield the unoccupied site was not detected; presumably, therefore, the circular transposition intermediate normally arises replicatively. Attempts to promote integration of a plasmid carrying the attachment site of IS 117 by providing the ORF1 product in trans were unsuccessful. Most transformation of S. lividans with circular IS 117 derivatives yielded tandem chromosomal insertions, which arose by co-transformation rather than dimerization of a monomeric insert. Typically, two to three transforming elements gave a transformed strain, suggesting a local concentration of transposase as a limit on integration.     

Evidence for integration of IS1 and IS10 in recombinant plasmid containing rearrangement hot-spot(rhs) common-shared block(CSB) in Escherichia coli K-12

The integration of IS1 and IS10 was reported in the recombinant plasmid containing the 3070 bp rearrangement hotspot(rhs) common-shared block(CSB) in Escherichia coli K-12. The integration of IS1 was found to be in rhs(CSB) portion, whereas the integration of IS10 was found to be in both rhs(CSB) and vector portions. The bacterial cells containing the recombinant plasmid grew very slowly. But the integration of IS1 or IS10 in rhs(CSB) portion made the host grow rapidly and overgrew the slow-growing population inheriting the recombinant plasmids without IS-sequences. The sites of integration of IS1 and IS10 were different as was judged from restriction endonuclease mapping. These are rare examples of interchromosomal mobilisation of IS1 and IS10 from host chromosome into plasmid.     

Integration of replication-defective R68.45-like plasmids into the Pseudomonas aeruginosa chromosome

R68.45 and other similar broad-host-range (IncP) plasmids carrying a tandem repeat of the 2.1 kb insertion element IS21 mobilize the chromosome of many different Gram-negative bacteria. To analyse the structure of R68.45-chromosome cointegrates, whose involvement in the mobilization process had been postulated previously, we selected for the stable integration of R68.45-like plasmids into the Pseudomonas aeruginosa chromosome. Two plasmids were chosen: pME28, a transfer-deficient, mobilizable RP1 derivative with an inactive replication control (trfA) gene, and pME487, an R68.45 derivative with a trfA(ts) mutation causing temperature-sensitive replication. Chromosomally integrated pME28 and pME487 were found to be flanked by single IS21 elements. This structure is in agreement with a 'cut-and-paste' mode of R68.45 transposition. pME28 and pME487 showed a low specificity of insertion but rarely (less than 0.1%) induced auxotrophic mutations. Hfr (high-frequency-of-recombination) donors of P. aeruginosa could be obtained by chromosomal integration of pME487 or pME28; in the latter case, the transfer functions lacking from pME28 had to be provided in trans on an autonomous plasmid. Hfr donors gave higher conjugational linkage and transferred longer stretches of the P. aeruginosa chromosome than did R68.45 donors. This suggests that the integration of R68.45 into the donor chromosome is short-lived in P. aeruginosa.     

Efficient transposition of IS911 circles in vitro.

An in vitro system has been developed which supports efficient integration of transposon circles derived from the bacterial insertion sequence IS911. Using relatively pure preparations of IS911-encoded proteins it has been demonstrated that integration into a suitable target required both the transposase, OrfAB, a fusion protein produced by translational frameshifting between two consecutive open reading frames, orfA and orfB, and OrfA, a protein synthesized independently from the upstream orfA. Intermolecular reaction products were identified in which one or both transposon ends were used. The reaction also generated various intramolecular transposition products including adjacent deletions and inversions. The circle junction, composed of abutted left and right IS ends, retained efficient integration activity when carried on a linear donor molecule, demonstrating that supercoiling in the donor molecule is not necessary for the reaction. Both two-ended integration and a lower level of single-ended insertions were observed under these conditions. The frequency of these events depended on the spacing between the transposon ends. Two-ended insertion was most efficient with a natural spacing of 3 bp. These results demonstrate that transposon circles can act as intermediates in IS911 transposition and provide evidence for collaboration between the two major IS911-encoded proteins, OrfA and OrfAB.     

UV light induces IS10 transposition in Escherichia coli.

A new mutagenesis assay system based on the phage 434 cI gene carried on a low-copy number plasmid was used to investigate the effect of UV light on intermolecular transposition of IS10. Inactivation of the target gene by IS10 insertion was detected by the expression of the tet gene from the phage 434 PR promoter, followed by Southern blot analysis of plasmids isolated from TetR colonies. UV irradiation of cells harboring the target plasmid and a donor plasmid carrying an IS10 element led to an increase of up to 28-fold in IS10 transposition. Each UV-induced transposition of IS10 was accompanied by fusion of the donor and acceptor plasmid into a cointegrate structure, due to coupled homologous recombination at the insertion site, similar to the situation in spontaneous IS10 transposition. UV radiation also induced transposition of IS10 from the chromosome to the target plasmid, leading almost exclusively to the integration of the target plasmid into the chromosome. UV induction of IS10 transposition did not depend on the umuC and uvrA gene product, but it was not observed in lexA3 and DeltarecA strains, indicating that the SOS stress response is involved in regulating UV-induced transposition. IS10 transposition, known to increase the fitness of Escherichia coli, may have been recruited under the SOS response to assist in increasing cell survival under hostile environmental conditions. To our knowledge, this is the first report on the induction of transposition by a DNA-damaging agent and the SOS stress response in bacteria.     

Cloning and sequencing of IS1086, an Alcaligenes eutrophus insertion element related to IS30 and IS4351.

A new insertion sequence (IS), designated IS1086, was isolated from Alcaligenes eutrophus CH34 by being trapped in plasmid pJV240, which contains the Bacillus subtilis sacB and sacR genes. The 1,106-bp IS1086 element contains partially matched (22 of 28 bp) terminal-inverted repeats and a long open reading frame. Hybridization data suggest the presence of one copy of IS1086 in the strain CH34 heavy-metal resistance plasmid pMOL28 and at least two copies in its chromosome. Analysis of the IS1086 nucleotide sequence revealed striking homology with two other IS elements, IS30 and IS4351, suggesting that they are three close members in a family of phylogenetically related insertion sequences. One open reading frame of the Spiroplasma citri phage SpV1-R8A2 B was also found to be related to this IS family but to a lesser extent. Comparison of the G+C contents of IS30 and IS1086 revealed that they conform to their respective hosts (46 versus 50% for IS30 and Escherichia coli and 64.5% for IS1086 and A. eutrophus). The pressure on the AT/GC ratio led to a very different codon usage in these two closely related IS elements. Results suggesting that IS1086 transposition might be activated by some forms of stress are discussed.     

Evidence of Horizontal Transfer of the EcoO109I Restriction-Modification Gene to Escherichia coli Chromosomal DNA

A DNA fragment carrying the genes coding for EcoO109I endonuclease and EcoO109I methylase, which recognize the nucleotide sequence 5'-(A/G)GGNCC(C/T)-3', was cloned from the chromosomal DNA of Escherichia coli H709c. The EcoO109I restriction-modification (R-M) system was found to be inserted between the int and psu genes from satellite bacteriophage P4, which were lysogenized in the chromosome at the P4 phage attachment site of the corresponding leuX gene observed in E. coli K-12 chromosomal DNA. The sid gene of the prophage was inactivated by insertion of one copy of IS21. These findings may shed light on the horizontal transfer and stable maintenance of the R-M system.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

A natural system of chromosome transfer in Yersinia pseudotuberculosis

The High Pathogenicity Island of Yersinia pseudotuberculosis IP32637 was previously shown to be horizontally transferable as part of a large chromosomal segment. We demonstrate here that at low temperature other chromosomal loci, as well as a non-mobilizable plasmid (pUC4K), are also transferable. This transfer, designated GDT4 (Generalized DNA Transfer at 4°C), required the presence of an IP32637 endogenous plasmid (pGDT4) that carries several mobile genetic elements and a conjugation machinery. We established that cure of this plasmid or inactivation of its sex pilus fully abrogates this process. Analysis of the mobilized pUC4K recovered from transconjugants revealed the insertion of one of the pGDT4-borne ISs, designated ISYps1, at different sites on the transferred plasmid molecules. This IS belongs to the IS6 family, which moves by replicative transposition, and thus could drive the formation of cointegrates between pGDT4 and the host chromosome and could mediate the transfer of chromosomal regions in an Hfr-like manner. In support of this model, we show that a suicide plasmid carrying ISYps1 is able to integrate itself, flanked by ISYps1 copies, at multiple locations into the Escherichia coli chromosome. Furthermore, we demonstrate the formation of RecA-independent cointegrates between the ISYps1-harboring plasmid and an ISYps1-free replicon, leading to the passive transfer of the non-conjugative plasmid. We thus demonstrate here a natural mechanism of horizontal gene exchange, which is less constrained and more powerful than the classical Hfr mechanism, as it only requires the presence of an IS6-type element on a conjugative replicon to drive the horizontal transfer of any large block of plasmid or chromosomal DNA. This natural mechanism of chromosome transfer, which occurs under conditions mimicking those found in the environment, may thus play a significant role in bacterial evolution, pathogenesis, and adaptation to new ecological niches.     

Conjugal transfer and mobilization capacity of the completely sequenced naphthalene plasmid pNAH20 from multiplasmid strain Pseudomonas fluorescens PC20

The complete 83 042-bp nucleotide sequence of the IncP-9 naphthalene degradation plasmid pNAH20 from Pseudomonas fluorescens PC20 exhibits striking similarity in size and sequence to another naphthalene (NAH) plasmid pDTG1. However, the positions of insertion sequence (IS) elements significantly alter both catabolic and backbone functions provided by the two plasmids. In pDTG1, insertion of a pCAR1 IS Pre1 -like element disrupts expression of the lower naphthalene operon and this strain utilizes the chromosomal pathway for complete naphthalene degradation. In pNAH20, this operon is intact and functional. The transfer frequency of pNAH20 is 100 times higher than that of pDTG1 probably due to insertion of the pCAR1 IS Pre2 -like element into the mpfR gene coding for a putative repressor of the mpf operon responsible for mating pilus formation. We also demonstrate in situ plasmid transfer – we isolated a rhizosphere transconjugant strain of pNAH20, P. fluorescens NS8. The plasmid pNS8, a derivative of pNAH20, lacks the ability to self-transfer as a result of an additional insertion event of IS Pre2 -like element that disrupts the gene coding for VirB2-like major pilus protein MpfA. The characteristics of the strain PC20 and the conjugal transfer/mobilization capacity of pNAH20 (or its backbone) make this strain/plasmid a potentially successful tool for bioremediation applications.     

Nucleotide sequence analysis of IS427 and its target sites in Agrobacterium tumefaciens T37

We have determined the nucleotide sequence of IS427, an insertion sequence from Agrobacterium tumefaciens T37, IS427 is 1271 bp long, contains 16-bp imperfect terminal inverted repeats, and generates a 2-bp target sequence duplication. It is present at three sites in the pTiT37 plasmid and is absent from the chromosome of A. tumefaciens T37. Each of the IS427 elements sequenced was near a site with sequence homology to integration host factor (IHF)-binding sites which suggested that IHF may be involved in IS427 transposition.     

Integration of SCP1, a giant linear plasmid, into the Streptomyces coelicolor chromosome.

SCP1, coding for the methylenomycin biosynthetic genes in Streptomyces coelicolor, is a giant linear plasmid of 350 kb. Extensive physical characterization revealed that SCP1 has unusually long terminal inverted repeats (TIR) of about 80 kb on both ends and an insertion sequence, IS466, at the end of the right TIR (TIR-R), and the 5'-ends are attached to a terminal protein. In the NF strain S. coelicolor 2612, SCP1 is integrated into the chromosome at the 9-o'clock position. Analysis of the two junctions between the SCP1 DNA and the chromosomal DNA revealed that the left junction had an almost intact left terminus of SCP1, while the right junction was composed of IS466, completely deleting TIR-R. Based on these results, we presented a possible formation mechanism of the NF strain, which is characterized by integration of SCP1 into the chromosome via an interaction of the target site and the combined ends of the racket-frame structure of SCP1 followed by deletion of TIR-R. We also hypothesized that this type of integration of a giant linear plasmid might be involved in the origin and distribution of the chromosomal antibiotic biosynthetic gene clusters in microorganisms.     

Effect of deletion and insertion on double-strand-break repair in Saccharomyces cerevisiae.

I investigated double-strand-break repair in Saccharomyces cerevisiae cells by measuring the frequencies and types of integration events at the PET56-HIS3-DED1 chromosomal region associated with the introduction of linearized plasmid DNAs containing homologous sequences. In general, the integration frequencies observed in strains containing a wild-type region, a 1-kilobase (kb) deletion, or a 5-kb insertion were similar, provided that the cleavage site in the plasmid DNA was present in the host genome. Cleavage at a plasmid DNA site corresponding to a region deleted in the chromosome caused a 10-fold reduction in the integration frequency even when the site was close to regions of homology. However, although the integration frequency was normal even when cleavage occurred only 25 base pairs (bp) outside the deletion breakpoint, 98% of the events were associated not with the usual heterogenote structure, but instead with a homogenote structure containing two copies of the deletion allele separated by vector sequences. Similarly, when cleavage occurred 80 bp outside the 5-kb substitution breakpoint, 40% of the integration events were associated with homogenote structures. From these observations, I suggest that exonuclease and polymerase activities are not rate-limiting steps in double-strand-break repair, exonuclease activity is coupled to the initiation step, the integration frequency is strongly influenced by the amount of homology near the recombinogenic ends, both ends of a linear DNA molecule might interact with the host chromosome before significant exonuclease or polymerase action, and the average repair tract is about 600 bp.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Interaction (integration and excision) of the pRP19.6 plasmid, a derivative of the RP1 plasmid containing duplicated sequence IS21, with the chromosome of Escherichia coli K12

A pRP19.6 plasmid is the derivative of the temperature sensitive RPlts12 plasmid and contains a duplicated IS21 (IS8) element. Using temperature sensitive pRP19.6 replication, Hfr strains have been obtained by integration of the plasmid into the chromosome of E. coli rec+ and recA- cells and their properties were studied. According to the results obtained, pRP19.6 insertion into the genome of the rec+ bacteria IS reversible, and its integration into the chromosome of the recA- bacteria produced the stable Hfr strains. To elucidate the mechanism of pRP19.6 excision from the bacterial chromosome, plasmids of R+ transconjugates generated with a low frequency in the crosses between the stable Hfr strains and the rec+ recipients were analyzed. It was shown that the stable Hfr clones might produce stable R1 plasmids as well as a family of deletion KmsTra- derivatives of the pRP19.6. The structure of the KmsTra- was investigated and the mechanism of their formation was proposed. In the light of the data obtained, prospects of pRP19.6 practical application are discussed.     

The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

Characterization of DNA sequences required for the CcrAB-mediated integration of staphylococcal cassette chromosome mec, a Staphylococcus aureus genomic island

The mobile element staphylococcal cassette chromosome mec (SCCmec), which carries mecA, the gene responsible for methicillin resistance in staphylococci, inserts into the chromosome at a specific site, attB, mediated by serine recombinases, CcrAB and CcrC, encoded on the element. This study sought to determine the sequence specificity for CcrB DNA binding in vitro and for CcrAB-mediated SCCmec insertion in vivo. CcrB DNA binding, as assessed in vitro by electrophoretic mobility shift assay (EMSA), revealed that a 14-bp sequence (CGTATCATAAGTAA; the terminal sequence of the orfX gene) was the minimal requirement for binding, containing an invariant sequence (TATCATAA) found in all chromosomal (attB) and SCCmec (attS) integration sites. The sequences flanking the minimal attB and attS binding sites required for insertion in vivo were next determined. A plasmid containing only 37 bp of attS and flanking sequences was required for integration into the attB site at 92% efficiency. In contrast, at least 200 bp of sequence within orfX, 5' to the attB core, and 120 bp of specific sequence 3' to the orfX stop site and attB core were required for the highest insertion frequency. Finally, an attS-containing plasmid was inserted into wild-type Staphylococcus aureus strains without integrated SCCmec (methicillin susceptible) at various frequencies which were determined both by sequences flanking the att site and by the presence of more than one att site on either the chromosome or the integration plasmid. This sequence specificity may play a role in the epidemiology of SCCmec acquisition.