Swelling behaviour of alginate–chitosan microcapsules prepared by external gelation or internal gelation technology

Swelling behaviour is one of the important properties for microcapsules made by hydrogels, which always affects the diffusion and release of drugs when the microcapsules are applied in drug delivery systems. In this paper, alginate–chitosan microcapsules were prepared by different technologies called external or internal gelation process respectively. With the volume swelling degree (S_w) as an index, the effect of properties of chitosan on the swelling behaviour of both microcapsules was investigated. It was demonstrated that the microcapsules with low molecular weight and high concentration of chitosan gave rise to low S_w. Considering the need of maintaining drug activity and drug loading, neutral pH and short gelation time were favorable. It was also noticed that S_w of internal gelation microcapsules was lower than that of external gelation microcapsules, which was interpreted by the structure analysis of internal or external gelation Ca–alginate beads with the aid of confocal laser scanning microscope.     

Optimal design of the Wilcoxon–Mann–Whitney‐test

In scientific research, many hypotheses relate to the comparison of two independent groups. Usually, it is of interest to use a design (i.e., the allocation of sample sizes m and n for fixed ) that maximizes the power of the applied statistical test. It is known that the two‐sample t‐tests for homogeneous and heterogeneous variances may lose substantial power when variances are unequal but equally large samples are used. We demonstrate that this is not the case for the nonparametric Wilcoxon–Mann–Whitney‐test, whose application in biometrical research fields is motivated by two examples from cancer research. We prove the optimality of the design in case of symmetric and identically shaped distributions using normal approximations and show that this design generally offers power only negligibly lower than the optimal design for a wide range of distributions.     

Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

Polyelectrolyte layer interpenetration and swelling of alginate–chitosan multilayers studied by dual wavelength reflection interference contrast microscopy

Polyelectrolyte multilayers of alginate and either poly-l-lysine or chitosan have been studied with dual wavelength reflection interference contrast microscopy (DW-RICM). Alginates with different ratios of the two monomer residues, β-d-mannuronic acid (M) and -l-guluronic acid (G) were included to study possible effects of specific divalent ions selected from their ability to influence gelation of alginate. Measurements of multilayer thickness revealed the importance of the preparation conditions. The multilayer thickness was reduced with increasing ionic strength following preparation, suggesting a dominance of an ordinary screening of the alginate component. The results indicate that the interaction between alginate and chitosan are different from that between alginate and poly-l-lysine, with the latter appearing to be more of a “hit-and-stick” reaction while rearrangements during the adsorption process is occurring to a larger extent in the preparation of the chitosan–alginate multilayers.     

Synthesis and characterization of a novel MPEG–chitosan diblock copolymer and self-assembly of nanoparticles

In this paper, a simple and novel method based on free-radical polymerization initiated by potassium persulfate (KPS) was developed to synthesize the MPEG–chitosan diblock copolymer (MPEG–CS). The obtained MPEG–CS diblock copolymer was characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The MPEG–CS copolymer could self-assemble into nanoparticles in aqueous solution. A typical TEM photography indicated that the well-spherical nanoparticles with diameter at about 200 nm were obtained. In vitro cell culture assay indicated that MPEG–CS nanoparticles are non-toxic and cell-compatible as the polymer concentration was smaller than 0.6 mg/ml. In conclusion, the obtained MPEG–CS nanoparticles might have great potential application in drug-delivery system.     

Effect of deacetylation time on the preparation, properties and swelling behavior of chitosan films

The objectives of the study were to propose a two-stage microfluidization combined with an ultrafiltration (UF) treatment for chitosan mass production and the manipulation of molecular weight and its distribution. The proposed methods are based on the degradation rate and rate constant of various process variables studied. Results obtained were that the rate constants were faster during the earlier reaction period, were higher for those operating at a higher pressure, were better for using concurrent UF treatment to remove small degraded fragments, and the degradation rate constants were faster for 30 °C solutions than that for 50 or 0 °C. A two-stage microfluidization process is proposed. The first stage constitutes of the highest possible concentration solution with concurrent UF treatment at 50 °C, and recycled 5 times. The second stage consists of the highest possible concentration of solutions with concurrent UF treatment at 30 °C, and recycled 5 times.     

Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

In order to utilize the psyllium husk a medicinally important natural polysaccharide and to develop the novel hydrogels meant for the colon specific drug delivery, we have prepared psyllium and methacrylamide based polymeric networks by using N,N′-methylenebisacrylamide (NN-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator. To study various structural aspects of the polymeric networks thus formed psy-cl-poly(MAAm), these were characterized with SEMs, FTIR, TGA and swelling studies. The swelling studies of networks were carried out as a function of time, temperature, pH and [NaCl]. Equilibrium swelling has been observed to depend on both composition of the polymer and nature of swelling medium. Maximum percent swelling 1262 was observed for the polymeric network prepared with 19.45 × 10⁻³ mol/L of [NN-MBAAm] at 40 °C in 0.5 M NaOH solution. This article also discusses the release dynamics of tetracycline hydrochloride from the hydrogels, for the evaluation of the drug release mechanism and diffusion coefficients of drug from the polymer matrix. The effect of pH on the release pattern of tetracycline hydrochloride has been studied by varying the pH of the release medium. It has been observed from the release dynamics of drug from the hydrogels that the diffusion exponent ‘n’ have 0.477, 0.423 and 0.427 values and gel characteristic constant ‘k’ have 5.07 × 10⁻², 6.34 × 10⁻² and 6.38 × 10⁻² values, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer solution. The values the ‘n’ indicated that the Fickian type diffusion mechanism occurred for the release of tetracycline hydrochloride from drug loaded psy-cl-poly(MAAm) polymers in different release mediums. In Fickian type diffusion mechanism, the rate of polymer chain relaxation is more as compare to the rate of drug diffusion from these hydrogels and release behavior follows Fick’s law of diffusion. In each release medium, the values of the initial diffusion coefficient ‘D_i’ for the release of tetracycline hydrochloride was higher than the values of late time diffusion coefficient ‘D_L’ indicating that in the start, the diffusion of drug from the polymeric matrix was faster as compare to the latter stages.     

Synthesis and characterization of thermo-sensitive semi-IPN hydrogels based on poly(ethylene glycol)-co-poly(ε-caprolactone) macromer, N-isopropylacrylamide, and sodium alginate

Thermo-sensitive semi-IPN hydrogels were prepared via in situ copolymerization of N-isopropylacrylamide (NIPAAm) with poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-co-PCL) macromer in the presence of sodium alginate by UV irradiation technology. The effects of the sodium alginate content, temperature, and salt on the swelling behavior of the as-obtained hydrogels were studied. The results showed that the swelling ratio of the hydrogels increased with the increasing sodium alginate content at the same temperature, and decreased with the increase in temperature. The salt sensitivity of the semi-IPN hydrogels was dependent on the content of sodium alginate introduced in the hydrogels. The mechanical rheology of the hydrogels and in vitro release behavior of bovine serum albumin (BSA) in situ encapsulated within the hydrogels were also investigated. It was found that the introduction of sodium alginate with semi-IPN structure improved mechanical strength of the hydrogels and the cumulative release percentage of BSA from the hydrogels. Such double-sensitive semi-IPN hydrogel materials could be exploited as potential candidates for drug delivery carriers.     

Sperm morphology and the evolution of intracellular sperm–egg interactions

Sperm morphology is incredibly diverse, even among closely related species, yet the coevolution between males and females of fertilization recognition systems is necessary for successful karyogamy (male and female pronuclear fusion). In most species, the entire sperm enters the egg during fertilization so sperm morphological diversity may impact the intracellular sperm–egg interactions necessary for karyogamy. We quantified morphological variation of sperm inside eggs prior to and following karyogamy in several species of Drosophila to understand whether evolution of sperm morphology could influence intracellular sperm–egg interactions (ISEIs). We measured seven parameters that describe ISEIs among species to determine whether these parameters varied both within a species across development and across species at the same developmental stage. We used heterospecific crosses to test the relative role of male origin, female origin, and interaction between the male and female in determining ISEIs. We found that sperm shape changed within a species as development proceeded and, at particular development stages, species varied in some ISEIs. Parental origin had an effect on some ISEIs, with a general trend for a stronger female effect. Overall, our findings identify conserved and variable ISEIs among species and demonstrate the potential to contribute understanding to gamete evolution and development.     

Importance of the interaction protein–protein of the CaM–PDE1A and CaM–MLCK complexes in the development of new anti‐CaM drugs

Protein–protein interactions play central roles in physiological and pathological processes. The bases of the mechanisms of drug action are relevant to the discovery of new therapeutic targets. This work focuses on understanding the interactions in protein–protein–ligands complexes, using proteins calmodulin (CaM), human calcium/calmodulin‐dependent 3′,5′‐cyclic nucleotide phosphodiesterase 1A active human (PDE1A), and myosin light chain kinase (MLCK) and ligands αII–spectrin peptide (αII–spec), and two inhibitors of CaM (chlorpromazine (CPZ) and malbrancheamide (MBC)). The interaction was monitored with a fluorescent biosensor of CaM (hCaM M124C–mBBr). The results showed changes in the affinity of CPZ and MBC depending on the CaM–protein complex under analysis. For the Ca²⁺–CaM, Ca²⁺–CaM–PDE1A, and Ca²⁺–CaM–MLCK complexes, CPZ apparent dissociation constants (K_ds) were 1.11, 0.28, and 0.55 μM, respectively; and for MBC K_ds were 1.43, 1.10, and 0.61 μM, respectively. In competition experiments the addition of calmodulin binding peptide 1 (αII–spec) to Ca²⁺–hCaM M124C–mBBr quenched the fluorescence (K_d = 2.55 ± 1.75 pM) and the later addition of MBC (up to 16 μM) did not affect the fluorescent signal. Instead, the additions of αII–spec to a preformed Ca²⁺–hCaM M124C–mBBr–MBC complex modified the fluorescent signal. However, MBC was able to displace the PDE1A and MLCK from its complex with Ca²⁺–CaM. In addition, docking studies were performed for all complexes with both ligands showing an excellent correlation with experimental data. These experiments may help to explain why in vivo many CaM drugs target prefer only a subset of the Ca²⁺–CaM regulated proteins and adds to the understanding of molecular interactions between protein complexes and small ligands. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous determination of citalopram and tadalafil by the second derivative synchronous fluorescence method in biological fluids; application of Box–Behnken optimization design

This is the first study focusing solely on that determination of tadalafil in the presence of citalopram as an antidepressant drug. The determination in biological fluids of a co‐administered antidepressant drug and a sexual stimulation drug is a very critical and important step for psychotic and ischaemic heart disease patients, especially in cases of emergency and this requires therapeutic drug monitoring. A sensitive, efficient and rapid assay was selected satisfactorily and applied for simultaneous determination of citalopram and tadalafil either in their pure forms, in tablet dosage forms or in spiked human plasma. There was a large overlap for both drugs, forming the broad band found in conventional fluorescence spectra and their related synchronous fluorescence intensity. Therefore, the development of a highly sensitive second derivative synchronous fluorescence method was demonstrated that removed this overlap. The proposed method depended on measuring the amplitudes of the second derivative of synchronous fluorescence intensity at suitable wavelengths of 301 nm and 367 nm for citalopram and tadalafil at Δλ = 60 nm, respectively. Box–Behnken design as a response surface methodology was used to fit models and create an optimization process encompassing a set of factors and resulting in an optimum response value specifically designed for this method. Under optimum conditions, the linear dynamic ranges for citalopram and tadalafil estimation were 20–900 and 5–400 ng ml^?1 with detection limits of 5.40 and 1.43 ng ml^?1, respectively.     

Effect of transglutaminase and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide on the solubility of fish gelatin–chitosan films

The possibility of decreasing the water solubility of the films made from fish gelatin and chitosan by modification with TGase was investigated. The effectiveness of enzymatic treatment was also compared with chemical crosslinking using EDC. The treatment of the components with TGase in concentration of 0.2 mg/ml of the film-forming solution limited the solubility of the films at 25 °C from 65% to 28% at pH 6 and from 96% to 37% at pH 3. After 15 min of heating at 100 °C, the modified films were soluble in 23% at pH 6 and in 41% at pH 3. Further decrease of the solubility of the fish gelatin–chitosan films was achieved when enzymatic modification was conducted in the presence of 5–10 mM DTT; the solubility was about twice lower than that without DTT at both studied temperatures and pH values. Generally, the composite films modified with EDC in concentration of 30 mM were distinctly less soluble than films made from the components modified with TGase in the presence of DTT.     

Investigation on the chemiluminescence reaction of the phenylhydrazine‐luminol–peroxide system

We studied the chemiluminescence (CL) oxidation of phenyl hydrazine–luminol with various organic and inorganic peroxides. Maximum CL intensity for this system was obtained for t‐butylhydroperoxide. The enhancement in CL depended strongly on pH and was greatest at pH 12.5. The solvent drastically enhanced the CL intensity. DMSO was found to increase the CL intensity many‐fold as compared to acetonitrile and water. The effect of temperature on CL intensity has also been studied. The CL spectra revealed a broad peak at 425 nm, which suggests excited 3‐aminophthalate ion as the luminophor. A mechanism to explain the reactions is suggested. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of sorbitol addition on the physicochemical characteristics of starch–fatty acid systems

Aqueous maize starch dispersions (20%) were heated at 100 °C, in the presence of myristic, palmitic or stearic acid potassium salts as well as of sorbitol added at concentrations up to 60% (dry starch). Flow behaviour measurements at 100 °C indicated that interactions took place between the starch–fatty acid systems and sorbitol resulting in viscosity increase which was more pronounced as the sorbitol content increased. Water solubility measurements showed that a major part of sorbitol was easily extracted by excess water whereas sorption experiments revealed that the moisture uptake rate was proportional to sorbitol content of the starch systems examined. Thermomechanical studies indicated that the starch–fatty acid samples containing sorbitol up to 40% exhibited antiplasticizing behaviour. Scanning electron microscopy studies revealed that at sorbitol concentrations over 30%, free sorbitol crystals were formed on the surface of starch–fatty acid samples, whereas the percentage crystallinity as well as the crystallite size of samples were proportional to sorbitol content.     

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

A new amphiphilic chitosan derivative, octanoylchitosan cinnamate (OCC) was synthesized through regioselective modifications of chitosan. A solution of OCC was spread to water to form a stable monolayer at the air/water interface. The surface pressure (π)–area (A) isotherm indicated that the polymer had a limiting area of about 100 Å² per repeat unit. YZ-type multilayers were deposited onto hydrophobic substrates through Langmuir–Blodgett (LB) technique. The structural features of the LB films were investigated by UV absorption, circular dichroism (CD) and linear dichroism (LD) spectroscopy. The results showed that the intrinsic chirality originating from the helical order of the OCC backbones was maintained in the LB films. Besides, the polymer backbones were uni-axially oriented in the LB film. The ordered structures of OCC assembled in a dilute solution and in a cast film were also investigated and the results were compared with that of the LB film.     

The preparation of a complex of insulin–phospholipids and their interaction mechanism

Subcutaneous injections of insulin remain the standard treatment for insulin‐dependent diabetic patients, and noninvasive routes are studied but with little success. One of the reasons is that insulin is a hydrophilic compounds and is difficult to cross the mucosa barrier. In this paper, we developed a novel technique to fabricate the insulin–phospholipids complex by a solvent evaporation method with the aim of improving the lipophilicity of insulin. A systematic study on the preparation conditions of the insulin–phospholipids complex is reported in the present work. The formation mechanism and the physicochemical properties of the complex are studied. The associated efficiency of the phospholipids and insulin can be up to 100% when their mass ratio is 7.5 : 1 or more, and the solubility of the complex is improved more than 40 000 times compared with that of insulin alone in the n‐octyl alcohol. The results of the insulin content in the complex and hypoglycemic effects in diabetic mice indicated that insulin was able to withstand the preparation procedure. The stability results showed that the complex was stable for 1 year at ?20 °C. The interaction mechanism of this formation is that the peptide bonds of insulin interact with the water‐soluble head of phospholipids, forming a reverse micelle‐like structure. This novel complex will be of great importance in the drug delivery system for insulin via noninvasive routes. This method is cost effective, scalable, and can be used in many other peptide drugs. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.