Kinetics of tributyrin hydrolysis by lipase

The kinetics for the tributyrin hydrolysis using lipase (Pseudomonas fluorscenes CCRC-17015) were investigated in the liquid–liquid and liquid–solid–liquid reaction systems in a batch reactor. The lipase was covalently immobilized onto the surface of porous polymethylacrylamide (PMAA) crosslinking with N,N-methylene biacrylamide with a spacer of ethylenediamine actived by glutaraldehyde. The conditions such as tributyrin concentration, temperature, agitation, and pH value, were evaluated to achieve the optimum reaction conditions for both free lipase and immobilized lipase. The kinetic parameters in the reaction system were also obtained for two reaction systems. The turnover numbers calculated for free lipase and immobilized lipase were 29 and 5.7 s⁻¹, respectively. The parameters of k and k_m obtained using Lineweaver-Burk plot method were 26.2 mol/(mg min) and 1.35 mol/dm³ for free lipase, 5.2 mol/(mg min) and 0.2 mol/dm³ for immobilized lipase, respectively. The experimental results revealed good thermal stability, with greater stability at higher pH value for immobilized lipase in the liquid–solid–liquid reaction.     

Evaluation of biodiesel production using lipase immobilized on magnetic silica nanocomposite particles of various structures

Nonporous and mesoporous silica-coated magnetite cluster nanocomposites particles were fabricated with various silica structures in order to develop a desired carrier for the lipase immobilization and subsequent biodiesel production. Lipase from Pseudomonas cepacia was covalently bound to the amino-functionalized particles using glutaraldehyde as a coupling agent. The hybrid systems that were obtained exhibited high stability and easy recovery regardless of the silica structure, following the application of an external magnetic field. The immobilized lipases were then used as the recoverable biocatalyst in a transesterification reaction to convert the soybean oil to biodiesel with methanol. Enzyme immobilization led to higher stabilities and conversion values as compared to what was obtained by the free enzyme. Furthermore, the silica structure had a significant effect on stability and catalytic performance of immobilized enzymes. In examining the reusability of the biocatalysts, the immobilized lipases still retained approximately 55% of their initial conversion capability following 5 times of reuse.     

Omega-3 production by fish oil hydrolysis using a lipase from Burkholderia gladioli BRM58833 immobilized and stabilized by post-immobilization techniques

Immobilization of lipase from Burkholderia gladioli BRM58833 on octyl sepharose (OCT) resulted in catalysts with higher activity and stability. Following, strategies were studied to further stabilize and secure the enzyme to the support using functionalized polymers, like polyethylenimine (PEI) and aldehyde-dextran (DEXa), to cover the catalyst with layers at different combinations. Alternatively, the construction of a bifunctional layer was studied using methoxypolyethylene glycol amine (NH 2 -PEG) and glycine. The catalyst OCT-PEI-DEXa was the most thermostable, with a 263.8-fold increase in stability when compared to the control condition. When evaluated under alkaline conditions, OCT-DEXa-PEG 10 /Gly was the most stable, reaching stability 70.1 times greater than the control condition. Proportionally, the stabilization obtained for B. gladioli BRM58833 lipase was superior to that obtained for the commercial B. cepacia lipase. Preliminary results in the hydrolysis of fish oil demonstrated the potential of the coating technique with bifunctional polymers, resulting in a stable catalyst with greater catalytic capacity for the production of omega-3 PUFAs. According to the results obtained, it is possible to modulate B. gladioli BRM58833 lipase properties like stability and catalytic activity for enrichment of omega-3 fatty acids.     

Enhanced acylation activity of esterase BioH from Escherichia coli by directed evolution towards improved hydrolysis activity

Esterase BioH is a critical enzyme for Biotin synthesis in Escherichia coli, which has been previously found to be active in the acylation of secondary alcohols and amines. Directed evolution towards improved acylation activity requires a high-throughput screening method. The aim of this study is to explore whether the acylation activity of BioH can be improved by directed evolution of its hydrolysis activity. A colorimetric method based on p-nitrophenyl butyrate hydrolysis was adopted in the high-throughput determination of hydrolysis activity. The wild-type BioH showed a hydrolysis activity of 18 U/mg, and the specific activities for α-phenylethanol and α-phenylethylamine acylation were 12.8 U/mg and 3.5 U/mg, respectively. After two rounds of directed evolution, seven mutants with improved hydrolysis activity were obtained, among which, K213E, Q70L/M170T and M197L/K213E also showed improvement in acylation activity. To further improve the acylation activity, site mutations were generated in different combinations at the four hot spots Q70L, M170T, M197L and K213E. Among the resulting mutants, Q70L/M197L/K213E showed the highest activity in α-phenylethylamine acylation with a 120% improvement, while Q70L/K213E had the highest α-phenylethanol acylation activity, which was improved by 70%. The results demonstrated that directed evolution of the hydrolysis activity might be a possible approach to improve the acylation activity of the esterase BioH.     

Immobilization of Candida rugosa lipase on polypropylene microfiltration membrane modified by glycopolymer: hydrolysis of olive oil in biphasic bioreactor

Polypropylene hollow fiber microfiltration membranes (PPHFMM) with improved hydrophilicity and biocompatibility surface were prepared by the plasma-induced graft polymerization of -allyl glucoside and were used to immobilize lipase from Candida rugosa by adsorption. A biphasic enzyme membrane bioreactor (EMR) was assembled with the glycopolymer-modified and enzyme-immobilized PPHFMM. Effect of operating variables on the performance of this biphasic EMR was investigated with the hydrolysis of olive oil. It was found that, at the optimal operational condition, an apparent volumetric reaction rate of about 0.074 mmol/l h can be obtained. This result indicated that the lipase-immobilized PPHFMM exhibited the catalytic efficiency similar to that of some hydrophilic membranes in biphasic EMR, which verified the feasibility of the employment of surface-hydrophilized polypropylene membranes in such EMR.     

CLEAs of Candida antarctica lipase B (CALB) with a bovine serum albumin (BSA) cofeeder core: Study of their catalytic activity

Highly active CALB cross-linked enzyme aggregates (CLEAs) were synthesized using a layered methodology based on the synthesis of a cross-linked protein cofeeder core over which an external layer of lipase was later cross-linked. The layered CALB CLEAs were characterized in terms of their catalytic activity in three different test reactions: esterification of oleic acid and ethanol in absence of solvents, esterification of oleic acid and heptanol in organic medium, and hydrolysis of triolein in emulsioned medium. The impact of the cross-linker/protein mass ratio on CLEAs activity, and its evolution with storage time were evaluated in the solventless synthesis of ethyloleate. The amount of cross-linker used showed to be a key parameter for the evolution of the catalytic activity of CLEAs during storage. Under the best conditions found, hyperactivated CALB CLEAs with up to 188% of recovered activity in ethyl oleate synthesis were obtained. In terms of hydrolytic activity mature layered CALB CLEAs showed a retained activity of 68%. The assay of dried mature layered CALB CLEAs in heptyl oleate synthesis showed catalytic activities much higher than the one exhibited by free CALB, reaching 1 h-fatty acid conversions of 14% and 2%, respectively. The high catalytic activity shown by layered CALB CLEAs, suggests that they are an interesting alternative specially for the catalysis of fatty acid esterifications in both organic and solventless medium.     

Immobilization of lipase from Candida rugosa on Eupergit C supports by covalent attachment

The present study compares the results of three different covalent immobilization methods employed for immobilization of lipase from Candida rugosa on Eupergit^® C supports with respect to enzyme loadings, activities and coupling yields. It seems that method yielding the highest activity retention of 43.3% is based on coupling lipase via its carbohydrate moiety previously modified by periodate oxidation. Study of thermal deactivation kinetics at three temperatures (37, 50 and 75 °C) revealed that the immobilization method also produces an appreciable stabilization of the biocatalyst, changing its thermal deactivation profile. By comparison of the t_1/2 values obtained at 75 °C, it can be concluded that the lipase immobilized via carbohydrate moiety was almost 2-fold more stable than conventionally immobilized one and 18-fold than free lipase. The immobilization procedure developed is quite simple, and easily reproduced, and provides a promising solution for application of lipase in aqueous and microaqueous reaction system.     

Effect of aprotic solvents on the enzymatic activity of lipase in AOT reverse micelles

The modification of reverse micellar systems composed of AOT, isooctane, water by the addition of aprotic solvents has been performed. The impact of this change on the activity, stability and kinetics of solubilized Chromobacterium viscosum lipase (glycerol-ester hydrolase, EC 3.1.1.3) was investigated. Of seven aprotic solvents tested, dimethyl sulfoxide (DMSO) was found to be most effective. It was found that lipase activity was enhanced by optimizing some relevant parameters, such as water–AOT molar ratio (W₀), buffer pH and surfactant concentration. A kinetic model that considers the free substrate in equilibrium with the substrate adsorbed on the micellar surface was successfully used to deduce some kinetic parameters (V_max, K_m and K_ad), and the values of K_m and K_ad were significantly reduced by the presence of DMSO. Higher lipase stability was found in AOT reverse micelles with DMSO compared with that in simple AOT systems with half-life of 125 and 33 days, respectively. Fluorescence spectroscopy and Fourier transform infrared spectroscopy (FT-IR) were used to elucidate the effects of DMSO on the properties of AOT reverse micelles.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

Kinetic and modelling studies on the lipase catalysed enantioselective esterification of (±)-perillyl alcohol

Several lipases were kinetically studied with the aim to exploit their enantioselectivity in the esterification of (S)-(−) and (R)-(+)-perillyl alcohol with decanoic acid. Most of the lipases studied exhibited stereopreference towards the R-enantiomer with apparent E-values from 3.8 to 0.6, calculated as the initial esterification rates ratio for the individual enantiomers. In an attempt to interpret the structural basis of enantioselectivity, modelling studies were performed with two of these lipases, Candida cylindracea lipase (CcL) and Pseudomonas cepacia lipase (PcL) based on their previously determined X-ray crystal structures. The results derived from modelling studies confirm their stereopreferences towards the R-enantiomer, since increased conformational energy of the S-ester was found compared to the R-ester.     

Functional expression,extracellular production,purification, structure modeling and biochemical characterization of Carica papaya lipase 1

Carica papaya latex has been reported to contain lipolytic activity since 1925, nevertheless the efforts to isolate lipolytic enzymes directly from the latex matrix have been unsuccessful. Nowadays papaya genome is known and heterologous expression is an alternative to overcome this problem. Therefore, in this study, Carica papaya lipase 1 sequence (CpLip1) has been identified in papaya genome and for the first time, functionally expressed using Pichia pastoris as host system. Purification of the recombinant enzyme was carried out by affinity chromatography and reached a 7-fold purification factor with 25 U/mg in the purified fraction. Interestingly, homology modeling with lipases of known structure revealed homology with microbial lipases. The biochemical characterization of the purified enzyme shows that CpLip1 hydrolyzed preferentially long-chain triglycerides, it has an optimal pH of 8.5 and an optimal temperature of 35 °C. Finally, the study of its stability in organic solvents showed that, as many lipases, CpLip1 activity is affected in polar solvents. This contribution opens the possibility of studying the catalytic performance of pure CpLip1 in several reactions, and a better understanding of the role of lipases in Carica papaya.     

Hexavalent Chromium Reduction by Immobilized Cells and the Cell-Free Extract of Bacillus sp. ES 29

Bacillus sp. ES 29 (ATCC: BAA-696) is an efficient chromate reducing bacterium. We evaluated hexavalent chromium (Cr[VI]) reduction by immobilized intact cells and the cell-free enzyme extracts of Bacillus sp. ES 29 in a bioreactor system. Influences of different flow rates (3 to 14 mL h-1), Cr(VI) concentration (2 to 8 mg L-1), and immobilization support materials (Celite, amberlite, and Ca-alginate) on Cr(VI) reduction were examined. Both immobilized intact cells and the cell-free extract of Bacillus sp. ES 29 displayed substantial Cr(VI) reduction. Increasing flow rates from 3 to 6 mL h-1 did not affect the rate of Cr(VI) reduction, but above 6 mL h-1, the Cr(VI) reducing capacity of the immobilized intact cells and cell-free extract of Bacillus sp. ES 29 decreased. With both intact cells and the cell-free extracts, the rate of Cr(VI) reduction was inversely related to the concentration. Intact cells immobilized to Celite displayed the highest rate (k = 0.443 at 3 mL h-1) of Cr(VI) reduction. For the immobilized cell-free extract, maximal reduction (k = 0.689 at 3 mL h-1) was observed with Ca-alginate. Using initial Cr(VI) concentrations of 2 to 8 mg L-1 at flow rates of 3 to 6 mL h-1 both immobilized intact cells and the cell-free extracts reduced 84 to 98% of the influent Cr(VI). Results indicate that immobilized cells and the cell-free extracts of Bacillus sp. ES 29 could be used for large-scale removal of Cr(VI) from contaminated water and waste streams in containment systems.     

Enantioselective enzymatic hydrolysis of racemic glycidyl butyrate by lipase from Bacillus subtilis with improved catalytic properties

The lipase from Bacillus subtillus (BSL2), a highly active lipase expressed from newly constructed strain of Bacillus subtilis BSL2, is used in the kinetic resolution of glycidyl butyrate. A high enantiomeric ratio (E = 108) was obtained by using 1,4-dioxane as co-solvent (18%, v/v) and decreasing the reaction temperature to 5 °C. The ratio is about 16-fold more than that (E = 6.52) obtained in pure buffer solutions (25 °C, pH 7.8). Under the optimum conditions, the remained (R)-glycidyl butyrate with high enantiopure (ee > 98%) was obtained when the conversion was above 52%.     

Screening and selection of a microbial lipase for the stereospecific hydrolysis of Verlukast

Summary A search was implemented for a microbial lipase capable of bioconverting a diester (dimethyl 5-(3-(2-(7-chloroquinolin-2-yl)ethyl)phenyl)4,6-dithianon to its S-ester acid, an intermediate in the production of Verlukast (a leukotriene receptor antagonist). Required properties of the sought-after enzyme included a high enantiomeric selectivity (e.e. >98%), the formation of only trace amounts of diacid and a high bioconversion rate. This search yielded 57 lipase-producing microorganisms, 18 of which presented detectable bioconversion activity. Thirteen of these microbes were selected for further study based upon their lipase production level and enzyme stability at harvest. Despite their common enzymatic property, namely the hydrolysis of triglycerides, these lipase preparations presented diverse ester acid specific synthesis rates (from <0.01 g/unit/h to 0.98 g/unit/h) and diacid formation levels (from 0% to 35%). One of these microbes, identified asPseudomonas aeruginosa (strain MB 5001), was found to produce a lipase having all of the above-listed required properties. The initial fermentation process developed in shake flasks was rapidly and successfully scaled up in 23-liter labora bioreactors, achieving a maximum production of 35 units/ml of lipase after 48 h of cultivation.     

Hexavalent Chromium Reduction by Immobilized Cells and the Cell-Free Extract of Bacillus sp. ES 29

Bacillus sp. ES 29 (ATCC: BAA-696) is an efficient chromate reducing bacterium. We evaluated hexavalent chromium (Cr[VI]) reduction by immobilized intact cells and the cell-free enzyme extracts of Bacillus sp. ES 29 in a bioreactor system. Influences of different flow rates (3 to 14 mL h?1), Cr(VI) concentration (2 to 8 mg L?1), and immobilization support materials (Celite, amberlite, and Ca-alginate) on Cr(VI) reduction were examined. Both immobilized intact cells and the cell-free extract of Bacillus sp. ES 29 displayed substantial Cr(VI) reduction. Increasing flow rates from 3 to 6 mL h?1 did not affect the rate of Cr(VI) reduction, but above 6 mL h?1, the Cr(VI) reducing capacity of the immobilized intact cells and cell-free extract of Bacillus sp. ES 29 decreased. With both intact cells and the cell-free extracts, the rate of Cr(VI) reduction was inversely related to the concentration. Intact cells immobilized to Celite displayed the highest rate (k = 0.443 at 3 mL h?1) of Cr(VI) reduction. For the immobilized cell-free extract, maximal reduction (k = 0.689 at 3 mL h?1) was observed with Ca-alginate. Using initial Cr(VI) concentrations of 2 to 8 mg L?1 at flow rates of 3 to 6 mL h?1 both immobilized intact cells and the cell-free extracts reduced 84 to 98% of the influent Cr(VI). Results indicate that immobilized cells and the cell-free extracts of Bacillus sp. ES 29 could be used for large-scale removal of Cr(VI) from contaminated water and waste streams in containment systems.     

Immobilized lipase on porous silica particles: Preparation and application for biodegradable polymer syntheses in ionic liquid at higher temperature

Porous silica particles (PSP) modified with different surface active groups were prepared for covalent immobilization of porcine pancreas lipase (PPL). Organosilanes combined with reactive end amino-group or epoxy-group were employed for the modification through silanization process. Polyethylenimine and long chain alkyl silane coupling agent were also used in the modification process. Several modification-immobilization strategies were performed, while good coupling yield could be achieved within the range of 86.2–158.2 mg of native PPL per gram of the carrier. Furthermore, at higher temperature, the resulting immobilized PPL (IPPL) could successfully perform the syntheses of polycaprolactone (PCL) and poly(5,5-dimethyl-1,3-dioxan-2-one) (PDTC) in ionic liquid medium. No polymers could be obtained catalyzed by native PPL, suggesting that IPPL showed much higher catalytic activity than native PPL. Effect of different treatments on the activity of IPPL also showed the long time high temperature stability in ionic liquid medium, contributing to a good combination of immobilization and ionic liquids effect. The catalytic activity of IPPL for polymerization was closely related to both the properties of immobilized enzyme and cyclic monomer. This work would be expected to highlight further careful design of immobilized enzyme for a wide range of application, especially in biodegradable polymers syntheses.     

Immobilized Candida antarctica lipase B on ZnO nanowires/macroporous silica composites for catalyzing chiral resolution of (R,S)-2-octanol

ZnO nanowires were successfully introduced into a macroporous SiO₂ by in situ hydrothermal growth in 3D pores. The obtained composites were characterized by SEM and XRD, and used as supports to immobilize Candida antarctica lipase B (CALB) through adsorption. The high specific surface area (233 m²/g) and strong electrostatic interaction resulted that the average loading amount of the composite supports (196.8 mg/g) was 3–4 times of that of macroporous SiO₂ and approximate to that of a silica-based mesoporous material. Both adsorption capacity and the activity of the CALB immobilized on the composite supports almost kept unchanged as the samples were soaked in buffer solution for 48 h. The chiral resolution of 2-octanol was catalyzed by immobilized CALB. A maximum molar conversion of 49.1% was achieved with 99% enantiomeric excess of (R)-2-octanol acetate under the optimal condition: a reaction using 1.0 mol/L (R,S)-2-octanol, 2.0 mol/L vinyl acetate and 4.0 wt.% water content at 60 °C for 8 h. After fifteen recycles the immobilized lipase could retain 96.9% of relative activity and 93.8% of relative enantioselectivity.     

纤维素酶与木质纤维素生物降解转化的研究进展

利用纤维素酶将预处理后的秸秆降解成可发酵性单糖,然后发酵生产所需的液体燃料及化工产品的技术,对于我国解决能源、环境、人口就业等难题有着巨大的积极影响。在木质纤维素生物降解转化工艺中,减少纤维素酶用量及提高酶解效率是降低木质纤维素降解成本的关键。纤维素酶系和木质纤维素酶水解技术的改进需要深入了解纤维素酶系统的组成及其协同作用、纤维素酶的结构与功能以及纤维素酶的生产技术。将就以上几个方面的研究进展进行讨论,并深入探讨了纤维素酶糖化能力的评价方法。     

Process intensification of immobilized lipase catalysis by microwave irradiation in the synthesis of 4-chloro-2-methylphenoxyacetic acid (MCPA) esters

4-Chloro-2-methylphenoxyacetic acid (MCPA) is a selective systemic herbicide which is absorbed by leaves and roots. MCPA esters are preferred due to their low water solubility and environmental friendliness. Esterification of MCPA with n-butanol was investigated as a model reaction using immobilized enzymes under the influence of microwave irradiation. Different immobilized enzymes such as Novozym 435, Lipozyme TL IM, Lipozyme RM IM and Lipase AYS Amano were studied under microwave irradiation amongst which Novozym 435 (immobilized Candida antarctica lipase B) was the best catalyst. Effects of various parameters were systematically studied on rates and conversion. Under microwave irradiation, the initial rates were observed to increase up to 2-fold. Under optimized conditions of 0.1 mmol MCPA and 0.3 mmol n-butanol in 15 mL 1,4-dioxane as solvent, Novozym 435 showed a conversion of 83% at 60 °C in 6 h. Based on initial rate and progress curve data, the reaction was shown to follow the Ping Pong bi–bi mechanism with inhibition by MCPA and n-butanol. Esterification of MCPA was also studied with different alcohols such as isopropyl alcohol, n-pentanol, n-hexanol, benzyl alcohol and 2-ethyl-1-hexanol.     

Asymmetric hydrolysis of dimethyl 3-phenylglutarate catalyzed by Lecitase Ultra: Effect of the immobilization protocol on its catalytic properties

The asymmetric hydrolysis of dimethyl 3-phenylglutarate (1) by different immobilized preparations of a phospholipase A₁ (Lecitase Ultra (LECI)) at pH 7 and 25 °C has been studied. Agarose beads coated with octyl, cyanogen bromide (CNBr), polyethylenimine (PEI) or glyoxyl groups were used as supports for the immobilization of LECI. The different derivatives behaved very differently in terms of activity, discrimination between 1 and methyl 3-phenylglutarate (2) resulting from the hydrolysis of 1, enantioselectivity (in the hydrolysis of 1 to produce R or S-2) and enantiospecificity in the hydrolysis of R-2 and S-2. Using 1 mM of 1, CNBr-LECI showed the highest activity (13 × 10⁻³ μmol/min mg protein) while octyl-LECI was about 20 times less active. All the enzyme preparations mainly produced (S)-2, but with different enantioselectivity. CNBr-Lecitase was the most enantioselective, producing the S-2 10 fold more rapidly than the R-2, while octyl-Lecitase gave only half of that difference.LECI adsorbed on octyl-agarose allowed to get a yield up to 99% of S-2 (ee was 66%). The reaction stopped in the monoester and no isomer of this compound was further hydrolyzed by the enzyme. However, when the reaction was catalyzed by the other immobilized LECI preparations, the enzyme was able to hydrolyze mainly the minority isomer, permitting to improve the ee of the remaining S-2. The best results were obtained using CNBr-LECI, which gave (S)-methyl-3-phenylglutarate with a yield of 80% and an ee exceeding 99%.