Characteristics of biosurfactant produced by Pseudomonas aeruginosa S6 isolated from oil-containing wastewater

A biosurfactant-producing strain S6 was isolated from oil-containing wastewater and identified as Pseudomonas aeruginosa based on physiological and biochemical tests together with 16S rDNA sequence analysis. Thin layer chromatography (TLC) and high-performance liquid chromatography electrospray ionization mass spectra (HPLC-ESI-MS) worked together to reveal that the strain S6 produced rhamnolipid biosurfactant. Mass spectrometry confirmed the presence of some major components in the rhamnolipid surfactant showing m/z of 675.8, 529.6, 503.3 and 475.4, which corresponded to RhaRhaC₁₀C_12:1, RhaC_12:1C₁₀, RhaC₁₀C₁₀ and RhaC₈C₁₀, respectively. The biosurfactant produced by strain S6 had the ability to decrease the surface tension of water from 72 to 33.9 mN m^?1, with the critical micelle concentration (CMC) of 50 mg L^?1. Emulsification experiment indicated that this biosurfactant effectively emulsified the crude petroleum and the measurements of surface tension demonstrated that the biosurfactant possessed stable surface activity at variable ranges of pH and salinity. The biosurfactant also exhibited good performance of phenanthrene solubilization with about 23 times higher solubility of phenanthrene in water than the control. Thus, this biosurfactant may have a potential for application in bioremediation of crude oil contamination.     

Evaluation of single cell oil from Aureobasidium pullulans var. melanogenum P10 isolated from mangrove ecosystems for biodiesel production

In this study, the yeast strain P10 which was identified to be a member of Aureobasidium pullulans var. melanogenum isolated from the mangrove ecosystems was found to be able to accumulate high content of oil in its cells. After optimization of the medium for lipid production and cell growth by the yeast strain P10, it was found that 8.0 g of glucose per 100 ml, 0.02 g of yeast extract per 100 ml, 0.02 g of ammonium sulfate per 100 ml, pH 6.0 in the medium were the most suitable for lipid production. During 10-l fermentation, a titer was 66.3 g oil per 100 g of cell dry weight, cell mass was 1.3 g per 100 ml, a yield was 0.11 g of oil per g of consumed sugar and a productivity was 0.0009 g of oil per g of consumed sugar per h within 120 h. At the same time, only 0.07 g of reducing sugar per 100 ml was left in the fermented medium. The compositions of the fatty acids produced were C_16:0 (26.7%), C_16:1(1.7%), C_18:0 (6.1%), C_18:1 (44.5%), and C_18:2 (21.0%). The biodiesel produced from the extracted lipid could be burnt well.     

Biosynthesis of ethyl caproate and other short ethyl esters catalyzed by cutinase in organic solvent

The main objective of this work was to study the enzymatic synthesis of short chain ethyl esters, a group of relevant aroma molecules, by Fusarium solani pisi cutinase in an organic solvent media (iso-octane), and to assess the influence of different parameters on the reaction yield.Cutinase displayed high initial esterification rates in iso-octane, which amounted to 1.15 μmol min⁻¹ mg⁻¹ for ethyl butyrate (C₄ acid chain) and 1.06 μmol min⁻¹ mg⁻¹ for ethyl valerate (C₅ acid chain). High product yields, 84% for ethyl butyrate and 96% for ethyl valerate, were observed after 6 h of reaction, for an initial equimolar concentration of substrates (0.1 M).The highest product yield (97%) was observed for ethyl caproate (C₆) synthesis, a compound which is a part of natural apple and pineapple flavour, for an alcohol:acid molar ratio of 2 (0.2 M ethanol concentration).Cutinase affinity for short chain length carboxylic acids (C₄–C₆) in ester synthesis in iso-octane confirmed previous observations in reversed micellar system.     

Continuous succinic acid production by Actinobacillus succinogenes in a biofilm reactor: Steady-state metabolic flux variation

Continuous anaerobic fermentations were performed in a novel external-recycle, biofilm reactor using d-glucose and CO₂ as carbon substrates. Succinic acid (SA) yields were found to be an increasing function of glucose consumption with the succinic acid to acetic acid ratio increasing from 2.4 g g⁻¹ at a glucose consumption of 10 g L⁻¹, to 5.7 g g⁻¹ at a glucose consumption of 50 g L⁻¹. The formic acid to acetic acid ratio decreased from an equimolar value (0.77 g g⁻¹) at a glucose consumption of 10 g L⁻¹ to a value close to zero at 50 g L⁻¹. The highest SA yield on glucose and highest SA titre obtained were 0.91 g g⁻¹ and 48.5 g L⁻¹ respectively. Metabolic flux analysis based on the established C₃ and C₄ metabolic pathways of Actinobacillus succinogenes revealed that the increase in the succinate to acetate ratio could not be attributed to the decrease in formic acid and that an additional source of NADH was present. The fraction of unaccounted NADH increased with glucose consumption, suggesting that additional reducing power is present in the medium or is provided by the activation of an alternative metabolic pathway.     

Rumen microbial responses in fermentation characteristics and production of CLA and methane to linoleic acid in associated with malate or fumarate

An in vitro incubation in batch was conducted to investigate the effect of propionate precursor (malate or fumarate) on fermentation characteristics, and production of CLA and methane by rumen microbes when incubated with linoleic acid (C_18:2). Sixty milligrams of C_18:2 alone (LA), 60 mg C_18:2 with 24 mM malic acid (M-LA), or 60 mg C_18:2 with 24 mM fumaric acid (F-LA) was added to 150 ml culture solution consisting of 75 ml strained rumen fluid and 75 ml McDougall's artificial saliva. Culture solution for incubation was also made without malate, fumarate, and C_18:2 (control). Two grams of feed consisting of 1.4 g concentrate and 0.6 g ground alfalfa (DM basis) was also added to the culture solution of each treatment. An in vitro incubation in batch was made anaerobically in a shaking incubator for up to 12 h at 39 °C.The pH of the culture solution was increased (P<0.0001) in M-LA or F-LA treatments from 3 h to 12 h compared with the control and LA treatments. At 12 h incubation, the concentration of total VFA in the culture solution was higher (P<0.01) in M-LA and F-LA than in control and LA treatments. Concentration of C₃ by M-LA and F-LA was increased at 3 h (P<0.01), 6 h (P<0.01) and 12 h (P<0.01) compared with control and LA. However, no difference in C₃ concentration was observed between control and LA, or between M-LA and F-LA. Accumulated total gas produced for up to 12 h incubation was increased (P<0.01) by M-LA or F-LA compared with the control. Accumulated total methane produced for up to 12 h incubation, however, was greatly reduced (P<0.01) by all the supplements compared with control, and its production from M-LA or F-LA was smaller than the LA. The M-LA or F-LA also increased (P<0.05–<0.001) the concentrations of cis9, trans11-CLA for all incubation times and trans10, cis12-CLA at 1 h (P<0.01), 3 h (P<0.05), and 12 h (P<0.05) incubation times compared with LA.It can be concluded that malate and fumarate, as propionate precursors, act as alternative electron sinks and may compete with CH₄ generation and bio-hydrogenation of C_18:2 in the utilization of metabolic H₂. The highest CLA concentration at the early incubation stage (1 h) was accompanied by reduced propionate proportion. Linoleic acid is also considered one of the potential alternatives to suppress CH₄ generation.     

Stimuli responsive polymorphism of C12NO/DOPE/DNA complexes: Effect of pH,temperature and composition

N,N-dimethyldodecylamine-N-oxide (C₁₂NO) is a surfactant that may exist either in a neutral or cationic protonated form depending on the pH of aqueous solutions. Using small angle X-ray diffraction (SAXD) we observe the rich structural polymorphism of pH responsive complexes prepared due to DNA interaction with C₁₂NO/dioleoylphosphatidylethanolamine (DOPE) vesicles and discuss it in view of utilizing the surfactant for the gene delivery vector of a pH sensitive system. In neutral solutions, the DNA uptake is low, and a lamellar L_α phase formed by C₁₂NO/DOPE is prevailing in the complexes at 0.2 ≤ C₁₂NO/DOPE < 0.6 mol/mol. A maximum of ~ 30% of the total DNA volume in the sample is bound in a condensed lamellar phase L_α^C at C₁₂NO/DOPE = 1 mol/mol and pH 7.2. In acidic conditions, a condensed inverted hexagonal phase H_II^C was observed at C₁₂NO/DOPE = 0.2 mol/mol. Commensurate lattice parameters, a_HC ≈ d_LC, were detected at 0.3 ≤ C₁₂NO/DOPE ≤ 0.4 mol/mol and pH = 4.9–6.4 suggesting that L_α^C and H_II^C phases were epitaxially related. While at the same composition but pH ~ 7, the mixture forms a cubic phase (Pn3m) when the complexes were heated to 80 °C and cooled down to 20 °C. Finally, a large portion of the surfactant (C₁₂NO/DOPE > 0.5) stabilizes the L_α^C phase in C₁₂NO/DOPE/DNA complexes and the distance between DNA strands (d_DNA) is modulated by the pH value. Both the composition and pH affect the DNA binding in the complexes reaching up to ~ 95% of the DNA total amount at acidic conditions.     

Novel insights into cyclooxygenases,linoleate diol synthases,and lipoxygenases from deuterium kinetic isotope effects and oxidation of substrate analogs

Cyclooxygenases (COX) and 8R-dioxygenase (8R-DOX) activities of linoleate diol synthases (LDS) are homologous heme-dependent enzymes that oxygenate fatty acids by a tyrosyl radical-mediated hydrogen abstraction and antarafacial insertion of O₂. Soybean lipoxygenase-1 (sLOX-1) contains non-heme iron and oxidizes 18:2n ? 6 with a large deuterium kinetic isotope effect (D-KIE). The aim of the present work was to obtain further mechanistic insight into the action of these enzymes by using a series of n ? 6 and n ? 9 fatty acids and by analysis of D-KIE. COX-1 oxidized C₂₀ and C₁₈ fatty acids in the following order of rates: 20:2n ? 6 > 20:1n ? 6 > 20:3n ? 9 > 20:1n ? 9 and 18:3n ? 3 ≥ 18:2n ? 6 > 18:1n ? 6. 18:2n ? 6 and its geometrical isomer (9E,12Z)18:2 were both mainly oxygenated at C-9 by COX-1, but the 9Z,12E isomer was mostly oxygenated at C-13. A cis-configured double bond in the n ? 6 position therefore seems important for substrate positioning. 8R-DOX oxidized (9Z,12E)18:2 at C-8 in analogy with 18:2n ? 6, but the 9E,12Z isomer was mainly subject to hydrogen abstraction at C-11 and oxygen insertion at C-9 by 8R-DOX of 5,8-LDS. sLOX-1 and 13R-MnLOX oxidized [11S-²H]18:2n ? 6 with similar D-KIE (~ 53), which implies that the catalytic metals did not alter the D-KIE. Oxygenation of 18:2n ? 6 by COX-1 and COX-2 took place with a D-KIE of 3–5 as probed by incubations of [11,11-²H₂]- and [11S-²H]18:2n ? 6. In contrast, the more energetically demanding hydrogen abstractions of the allylic carbons of 20:1n ? 6 by COX-1 and 18:1n ? 9 by 8R-DOX were both accompanied by large D-KIE (> 20).     

Enhanced selective oxidation of trimethylolpropane to 2,2-bis(hydroxymethyl)butyric acid using Corynebacterium sp. ATCC 21245

2,2-Bis(hydroxymethyl)butyric acid (BHMB) is an important multifunctional chemical for the emerging bio-based polymer industry. It can be produced from trimethylolpropane (TMP) by selective oxidation using growing cells of Corynebacterium sp. ATCC 21245. However, this process is limited by the low volumetric productivity and low concentration of the final product. In the present study, we performed sequential batch operation with cell recycling in media containing glycerol, acetic acid, and increasing concentrations of yeast extract. This approach enhanced the conversion of 10 and 15 g/L TMP to 11.0 and 16.3 g/L BHMB at rates of 0.50 and 0.20 g/L^.h, respectively. Applying a cell bleeding strategy resulted in an overall 10-fold improvement in productivity. The consequently prolonged biocatalyst viability resulted in a quantitative conversion of 20 g/L TMP to 22.3 g/L BHMB and a yield of 1.10 g_BHMB/g_TMP (100% molar yield). This work facilitates further studies of the selective oxidation on other industrially important polyols.     

Immobilisation of CGTase for continuous production of long-carbohydrate-chain alkyl glycosides: Control of product distribution by flow rate adjustment

Bacillus macerans cyclodextrin glycosyltransferase (CGTase) (EC 2.4.1.19) was covalently immobilised on Eupergit C and used in a packed-bed reactor to investigate the continuous production of long-carbohydrate-chain alkyl glycosides from α-cyclodextrin (α-CD) and n-dodecyl-(1,4)-β-maltopyranoside (C₁₂G₂β). The effects of buffer ion strength and pH, and enzyme loading on the immobilisation yield and the enzyme activity were evaluated. Approximately 98% of the protein and 33% of the total activity were immobilised. At pH 5.15, the enzymatic half-life was 132 min at 60 °C and 18 min at 70 °C. The immobilised enzyme maintained 60% of its initial activity after 28 days storage at 4 °C. The degree of conversion was controlled by simple regulation of the flow rate through the reactor, making it possible to optimise the product distribution. It was possible to achieve a yield of the primary coupling product n-dodecyl-(1,4)-β-maltooctaoside (C₁₂G₈β) of about 50%, with a ratio between the primary and the secondary coupling product of about 10. Thermoanaerobacter sp. CGTase (Toruzyme 3.0 L) immobilised on Eupergit C had good operational stability at 60 and 70 °C thus showing the advantages of using more thermostable enzymes in biocatalysis. However, this enzyme was unsuitable for the production of C₁₂G₈β due to extensive disproportionation reactions, giving a broad product range.     

Agro-industrial oily wastes as substrates for PHA production by the new strain Pseudomonas aeruginosa NCIB 40045: Effect of culture conditions

Production of poly(3-hydroxyalkaonates) (PHA) by Pseudomonas aeruginosa 42A2 from agro-industrial oily wastes was studied. PHA accumulation, throughout the cell cycle, was observed as intracellular accumulation associated to polyphosphate granules. A 54.6% PHA accumulation was obtained when technical oleic acid (TOA) was used as carbon source. Molecular weight of the polymer was 54.7 Da. The polymer was amorphous, with glass transition at −47.5 °C and thermal degradation at 293 °C. PHA production and monomer composition were affected by K_La and temperature. The most relevant characteristic of the polymer produced at low aeration rates (K_La, 0.06 s⁻¹) were the unusual C_14:2 (13%) and the increase of C_12:1 (42.2%). The highest amount of unsaturated monomers was found in the polymer produced at 18 °C (64.4%).PHA accumulation ranged between 66.1% when waste-free fatty acids from soybean oil (WFFA) were used as carbon substrate, 29.4% when waste frying oil (WFO) was used and 16.8% when glucose was used. Depending on the substrate supplied a wide range of components was observed. Major saturated or unsaturated components of the polymer found were C_10:0, C_12:0 and C_8:0 or C_12:1 and C_14:1, respectively. When glucose was used as carbon substrate C_9:0, C_11:0 and C_16:0 were found.     

Rhizobium indicum sp. nov., isolated from root nodules of pea (Pisum sativum) cultivated in the Indian trans-Himalayas

Three strains of rhizobia isolated from effective root nodules of pea (Pisum sativum L.) collected from the Indian trans-Himalayas were characterized using 16S rRNA, atpD and recA genes. Phylogeny of the 16S rRNA genes revealed that the newly isolated strains were members of the genus Rhizobium with ≥99.9% sequence similarity to the members within the “Rhizobium leguminosarum” group. Phylogenetic analyses based on the concatenated sequences of atpD and recA gene, and 92 core genes extracted from the genome sequences indicated that strains JKLM 12A2^T and JKLM 13E are grouped as a separate clade closely related to R. laguerreae FB206^T. In contrast, the strain JKLM 19E was placed with “R. hidalgonense” FH14^T. Whole-genome average nucleotide identity (ANI) values were 97.6% within strains JKLM 12A2^T and JKLM 13E, and less than 94% with closely related species. The digital DNA-DNA hybridization (dDDH) values were 81.45 within the two strains and less than 54.8% to closely related species. The major cellular fatty acids were C_18:1w7c in summed feature 8, C_{14:0 3OH}/C_{16:1 iso I} in summed feature 2, and C_18:0. The DNA G + C content of JKLM 12A2^T and JKLM 13E was 60.8 mol%. The data on genomic, chemotaxonomic, and phenotypic characteristics indicates that the strains JKLM 12A2^T and JKLM 13E represent a novel species, Rhizobium indicum sp. nov. The type strain is JKLM 12A2^T (= MCC 3961^T = KACC 21380^T = JCM 33658^T). However, the strain JKLM 19E represents a member of “R. hidalgonense” and the symbiovar viciae.     

Enzymatic hydrolysis of corncob and ethanol production from cellulosic hydrolysate

 Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H₂SO₄ at 108 °C for 3 h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5 CBU g⁻¹ substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100 g l⁻¹ substrate, with cellulosic residue added at 6 and 12 h twice to get a final substrate concentration of 200 g l⁻¹. After 60 h of reaction, the reducing sugar concentration reached 116.3 g l⁻¹ with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3 g l⁻¹ glucose was performed using Saccharomyces cerevisiae 316, and 45.7 g l⁻¹ ethanol was obtained within 18 h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.     

Antioxidant action of sugar-pendant C60 fullerenes

The action of C₆₀ fullerene and its derivatives as a radical-scavenging antioxidant has received much attention, but their reactivity toward free radicals and antioxidant capacity have not been well elucidated yet. In the present study, the reactivity of the two types of water-soluble, sugar-pendant C₆₀ fullerenes, C₆₀-1S and C₆₀-2S, toward peroxyl radical and their effect against human plasma lipid peroxidation were measured. The rate constants for the reaction of C₆₀-1S and C₆₀-2S with peroxyl radicals were obtained from their effect on the bleaching of β-carotene in lipid-SDS micelle system as 4.6 × 10³ and 8.0 × 10³ M^?1 s^?1 at 37 °C, respectively. They inhibited the free radical-induced lipid peroxidation in human plasma in a concentration-dependent manner. These results suggest that the sugar-pendant fullerenes C₆₀-1S and C₆₀-2S act as a radical-scavenging antioxidant with the activity similar to the phenolic antioxidants.     

Graft polymers of eucalyptus lignosulfonate calcium with acrylic acid: Synthesis and characterization

The graft copolymerization of eucalyptus lignosulfonate calcium (HLS-Ca) from hardwood and acrylic acid (AA) was investigated by using Fenton agent as a coinitiator. The influences of reaction conditions on grafting parameters i.e. product yield (Y%), AA conversion (C%), grafting ratio (G%) and grafting efficiency (GE%) were carefully studied. The effects of the phenolic hydroxyl (Ph-OH) group on the polymerization of AA and grafting reaction were researched. Graft copolymers were identified by the new absorption at 1727 cm^?1, more homogenized morphology and higher decomposition temperature after grafted with AA, as illustrated in FTIR, SEM and TG spectra. The optimum synthesis conditions are as follows: H₂O₂ = 25.2 mol/L, FeCl₂ = 63.0 mol/L, T = 50 °C and t = 2 h and the optimum percentages of Y, C, G and GE are 97.61%, 95.23%, 71.29% and 78.85%, respectively. The Ph-OH group of HLS-Ca cannot inhibit the polymerization of AA and is involved in the grafting reaction as an active center.     

Pantoea endophytica sp. nov., novel endophytic bacteria isolated from maize planting in different geographic regions of northern China

Four endophytic bacterial strains were isolated from root, stem and leaf of maize planted in different regions of northern China. The four strains possessed almost identical 16S rRNA gene sequences. However, REP-PCR fingerprint patterns discriminated that they were not from one clonal origin. Furthermore, the average nucleotide identity (ANI) values among them were higher than 95%, suggesting they all belong to one species. Based on 16S rRNA gene phylogeny, the four strains were clustered together with Pantoea rodasii LMG 26273^T and Pantoea rwandensis LMG 26275^T, but on a separate branch. Multilocus sequence analysis (MLSA) indicated that the four strains form a novel Pantoea species. Authenticity of the novel species was confirmed by ANI comparisons between strain 596^T and its closest relatives, since obtained values were considerably below the proposed thresholds for the species delineation. The genome size of 596^T was 5.1Mbp, comprising 4896 predicted genes with DNA G + C content of 57.8 mol%. The respiratory quinone was ubiquinone-8 (Q-8) and the polar lipid profile consisted of phosphatidylethanolamin, diphosphatidylglycerol, phosphatidylglycerol, unidentified aminophospholipid and unidentified phospholipid. The major fatty acids of strain 596^T were C_16:0, summed feature 2 (C_12:0 aldehyde), summed feature 3 (C_16:1ω7c and/or C_16:1ω6c) and summed feature 8 (C_18:1ω7c and/or C_18:1ω6c). Based on phylogenetic, genomic, phenotypic and chemotaxonomic data, the four isolates are considered to represent a novel species of the genus Pantoea, for which the name Pantoea endophytica sp. nov., is proposed, with 596^T (= DSM 100,785^T = CGMCC 1.15280^T) as type strain.     

Rainbow trout (Oncorhynchus mykiss) Elovl5 and Elovl2 differ in selectivity for elongation of omega-3 docosapentaenoic acid

The synthesis of the omega-3 long-chain polyunsaturated fatty acids (LCPUFA)  eicosapentaenoic acid (EPA; 20:5n− 3) and docosahexaenoic acid (DHA; 22:6n − 3) from dietary α-linolenic acid (ALA; 18:3n − 3) requires three desaturation and three elongation steps in vertebrates. The elongation of EPA to docosapentaenoic acid (DPA; 22:5n − 3) can be catalysed by the elongase enzymes Elovl5 or Elovl2, but further elongation of DPA to 24:5n − 3, the penultimate precursor of DHA, is limited to Elovl2, at least in mammals. Elovl5 enzymes have been characterised from seventeen fish species but Elovl2 enzymes have only been characterised in two of these fish. The essentiality of Elovl2 for DHA synthesis is unknown in fish. This study is the first to identify an Elovl2 in rainbow trout (Oncorhynchus mykiss) and functionally characterise the Elovl5 and Elovl2 using a yeast expression system. Elovl5 was active with C_18–20 PUFA substrates and not C₂₂ PUFA. In contrast, Elovl2 was active with C_20–22 PUFA substrates and not C₁₈ PUFA. Thus, rainbow trout is dependent on Elovl2 for DPA to 24:5n − 3 synthesis and ultimately DHA synthesis. The expression of elovl5 was significantly higher than elovl2 in liver. Elucidating this dependence on Elovl2 to elongate DPA and the low elovl2 gene expression compared with elovl5 are critical findings in understanding the potential for rainbow trout to synthesize DHA.     

Kinetic and anion inhibition studies of a β-carbonic anhydrase (FbiCA 1) from the C4 plant Flaveria bidentis

Several β-carbonic anhydrases (CAs, EC 4.2.1.1) are present in all land plants examined thus far. Here we report the first detailed biochemical characterization of one such isoform, FbiCA 1, from the C₄ plant Flaveria bidentis, which was cloned, purified and characterized as recombinant protein. FbiCA 1 has an interesting CO₂ hydrase catalytic activity (k_cat of 1.2 × 10⁵ and k_cat/K_m of 7.5 × 10⁶ M^?1 × s^?1) and was moderately inhibited by most simple/complex inorganic anions. Potent FbiCA 1 inhibitors were also detected, such as trithiocarbonate, diethyldithiocarbamate, sulfamide, sulfamic acid, phenylboronic acid and phenylarsonic acid (K_Is in the range of 4–60 μM). Such inhibitors may be used as tools to better understand the role of various β-CA isoforms in photosynthesis.     

Influence of organic systems on milk fatty acid profile and CLA in goats

The effect of organic system on the fatty acid profile of milk and CLA content was evaluated using 30 pregnant pluriparous goats, divided into two homogeneous groups (S and O) of 15 goats each. Group S was housed in a stable and received alfalfa hay as forage, while group O was raised according EC Regulation 834/2007 and led to pasture. After the kids weaning, goats were milked twice a day for 5 months. Daily milk yield was recorded and, monthly, representative milk samples from the two daily milkings were analysed for chemical and fatty acid profile. Average milk yield did not differ statistically between the groups. The goats of the O group had significantly higher fat content in milk than those of group S (65.9 g/day vs. 54.3 g/day, P < 0.01). Among milk fatty acids, organic system significantly affected the percentages of C18:1 c9, C18:1 t11, linoleic acid, alpha-linolenic acid, monounsaturated fatty acid and polyunsaturated fatty acid. Organic system highly influenced the c9 t11 conjugated linoleic acid (CLA) (0.810 g/100 g of fat vs. 0.542 g/100 g of fat, for groups O and S, respectively, P < 0.01), t10 c12 CLA (0.041 g/100 g of fat vs. 0.024 g/100 g of fat, for groups O and S, respectively, P < 0.01) and ∑CLA (0.87 g/100 g of fat vs. 0.58 g/100 g of fat for groups O and S, respectively, P < 0.01) concentrations of milk.     

Characterization of the lipase immobilized on Mg–Al hydrotalcite for biodiesel

Immobilization of Saccharomyces cerevisiae lipase by physical adsorption on Mg–Al hydrotalcite with a Mg/Al molar ratio of 4.0 led to a markedly improved performance of the enzyme. The immobilized lipase retained activity over wider ranges of temperature and pH than those of the free lipase. The immobilized lipase retained more than 95% relative activity at 50 °C, while the free lipase retained about 88%. The kinetic constants of the immobilized and free lipases were also determined. The apparent activation energies (E_a) of the free and immobilized lipases were estimated to be 6.96 and 2.42 kJ mol^?1, while the apparent inactivation energies (E_d) of free and immobilized lipases were 6.51 and 6.27 kJ mol^?1, respectively. So the stability of the immobilized lipase was higher than that of free lipase. The water content of the oil must be kept below 2.0 wt% and free fatty acid content of the oil must be kept below 3.5 mg KOH g [oil]^?1 in order to get the best conversion. This immobilization method was found to be satisfactory to produce a stable and functioning biocatalyst which could maintain high reactivity for repeating 10 batches with ester conversion above 81.3%.     

A Kazal-type serine proteinase inhibitor from chicken liver (clTI-1): Purification,primary structure,and inhibitory properties

Low-molecular-mass trypsin inhibitor (clTI-1; chicken liver Trypsin Inhibitor-1) was purified from chicken liver by extraction with perchloric acid, ammonium sulfate precipitation, a combination of ethanol-acetone fractionation followed by gel filtration, ion-exchange chromatography and RP-HPLC on a C18 column. The inhibitor occurs in two isoforms with molecular masses of 5938.56 and 6026.29 Da (determined by MALDI TOFF mass spectrometry). The complete amino acid sequences of both isoforms were determined (UniProtKB/Swiss-Prot P85000; ISK1L_CHICK). The inhibitor shows a high homology to Kazal-type family inhibitors, especially to trypsin/acrosin inhibitors and pancreatic secretory trypsin inhibitors. clTI-1 inhibits both bovine and porcine trypsin (K_a = 1.1 × 10⁹ M^?1 and 2.5 × 10⁹ M^?1, respectively). Significant differences were shown in the inhibition of the anionic and cationic forms of chicken trypsin (K_a = 4.5 × 10⁸ M^?1 and 1.2 × 10¹⁰ M^?1). Weak interaction with human plasmin (K_a = 1.2 × 10⁷ M^?1) was also revealed.