Racemization study on different N-acetylamino acids by a recombinant N-succinylamino acid racemase from Geobacillus kaustophilus CECT4264

N-Succinylamino acid racemase (NSAAR) with N-acylamino acid racemase (NAAAR) activity together with a d- or l-aminoacylase allows the total transformation of N-acetylamino acid racemic mixtures into optically pure d- or l-amino acids, respectively. In this work we have cloned and expressed the N-succinylamino acid racemase gene from the thermophilic Bacillus-related species Geobacillus kaustophilus CECT4264 in Escherichia coli BL21 (DE3). G. kaustophilus NSAAR (GkNSAAR) was purified in a one-step procedure by immobilized cobalt affinity chromatography and showed an apparent molecular mass of 43 kDa in SDS-gel electrophoresis. Size exclusion chromatography analysis determined a molecular mass of about 150 kDa, suggesting that the native enzyme is a homotetramer. Optimum reaction conditions for the purified enzyme were 55 °C and pH 8.0, using N-acetyl-d-methionine as substrate. GkNSAAR showed a gradual loss of activity at preincubation temperatures over 60 °C, suggesting that it is thermostable. As activity was greatly enhanced by Co²⁺, Mn²⁺ and Ni²⁺ but inhibited by metal-chelating agents, it is considered a metalloenzyme. The Co²⁺-dependent activity profile of the enzyme was studied with no detectable inhibition at higher metal ion concentrations. GkNSAAR showed activity towards both aliphatic and aromatic N-acetylamino acids such as N-acetyl-methionine and N-acetyl-phenylalanine, respectively, with k_cat/K_m values ranging from 1 × 10³ to 9 × 10³ s^?1 M^?1. Kinetic parameters were better for N-acetyl-d-amino acids than for N-acetyl-l-specific ones.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

Use of Citrobacter koseri whole cells for the production of arabinonucleosides: A larger scale approach

Purine arabinosides are well known antiviral and antineoplastic drugs. Since their chemical synthesis is complex, time-consuming, and polluting, enzymatic synthesis provides an advantageous alternative. In this work, we describe the microbial whole cell synthesis of purine arabinosides through nucleoside phosphorylase-catalyzed transglycosylation starting from their pyrimidine precursors. By screening of our microbial collection, Citrobacter koseri (CECT 856) was selected as the best biocatalyst for the proposed biotransformation. In order to enlarge the scale of the transformations to 150 mL for future industrial applications, the biocatalyst immobilization by entrapment techniques and its behavior in different reactor configurations, considering both batch and continuous processes, were analyzed. C. koseri immobilized in agarose could be used up to 68 times and the storage stability was at least 9 months. By this approach, fludarabine (58% yield in 14 h), vidarabine (71% yield in 26 h) and 2,6-diaminopurine arabinoside (77% yield in 24 h), were prepared.     

Lipase-catalyzed synthesis of capsiate analog using vanillyl alcohol and conjugated linoleic acid under vacuum system

This study focused on the application of vacuum system to synthesize capsiate analogs. The capsiate analogs containing conjugated linoleic acid (CLA) was successfully synthesized in solvent free system via lipase-catalyzed esterification. This esterification was carried out using vanillyl alcohol and CLA as substrates, and Lipozyme RM IM from Rhizomucor miehei as a biocatalyst. The best reaction condition was a molar ratio of 1:2 (vanillyl alcohol to CLA), a reaction temperature of 50 °C, and a lipase loading of 10% (w/w, based on total substrates). Application of vacuum increased the yield of capsiate analog as well as the reaction rate. When the vacuum levels were between 66.7 kPa and 1.3 kPa, an equilibrium yield of 100 mol% was achieved. The maximum yield was approached after only 3 h of reaction at the vacuum levels of higher than 13.3 kPa. The content of 9c,11t-CLA in capsiate analog synthesized was higher than that of 10t,12c-CLA.     

Structure of dihydropyrimidinase from Sinorhizobium meliloti CECT4114: New features in an amidohydrolase family member

The recombinant dihydropyrimidinase from Sinorhizobium meliloti CECT4114 (SmelDhp) has been characterised and its crystal structure elucidated at 1.85 Å. The global architecture of the protein is reminiscent of that of the amidohydrolase superfamily, consisting of two domains; an (α/β)₈ TIM-like barrel domain, where the catalytic centre is located, and a smaller β-sheet sandwich domain of unknown function. The c-terminal tails of each subunit extend toward another monomer in a swapping-like manner, creating a hydrogen bond network which suggests its implication in protein oligomerisation. Mutational and structural evidence suggest the involvement of a conserved tyrosine in the reaction mechanism of the enzyme. SmelDhp presents both hydantoinase and dihydropyrimidinase activities, with higher affinity for the natural six-membered ring substrates. For the five-membered ring substrates, affinity was greater for those with aliphatic and apolar groups in the 5th carbon atom, with the highest rates of hydrolysis for d-5-methyl and d-5-ethyl hydantoin (k_cat/K_m = 2736 ± 380 and 944 ± 52 M^?1 s^?1, respectively). The optimal conditions for the enzyme activity were found to be 60 °C of temperature at pH 8.0. SmelDhp retains 95% of its activity after 6-hour preincubation at 60 °C. This is the first dihydropyrimidinase used for the hydrolytic opening of non-natural 6-monosubstituted dihydrouracils, which may be exploited for the production of β-amino acids.     

Vibrio aestivus sp. nov. and Vibrio quintilis sp. nov., related to Marisflavi and Gazogenes clades,respectively

Two new Vibrio species, Vibrio aestivus and Vibrio quintilis, are described after a polyphasic characterization of strains M22^T, M61 and M62^T, isolated from seawater collected off a beach on the East coast of Spain (Valencia). All three strains are Gram negative, mesophilic, slightly halophilic, fermentative rods. V. aestivus (M22^T = CECT 7558^T = CAIM 1861^T = KCTC 23860^T and M61 = CECT 7559 = CAIM 1862 = KCTC 23861) is oxidase positive, reduces nitrates to nitrites, is negative for Voges Proskauer, arginine dihydrolase and indole and non hydrolytic on most substrates tested. The 16S rRNA gene sequences of M22^T and M61 are most similar to Vibrio marisflavi (97.1–97.2%) but phylogenetic analysis using NJ, MP and ML methods display Vibrio stylophorae (96.2% similarity) as sibling species. The three species form a deep clade in the genus Vibrio. Average Nucleotide Identity (ANI) values, determined as a measure of overall genomic resemblance, confirmed that strains M22^T and M61 are members of the same species, different to V. marisflavi CECT 7928^T.V. quintilis (M62^T = CECT 7734^T = CAIM 1863^T = KCTC 23833^T) is aerogenic, arginine dihydrolase and Voges Proskauer positive, oxidase negative and unable to reduce nitrate, traits shared by most species in the Gazogenes clade. It is unpigmented and does not grow on TCBS Agar. 16S rRNA gene similarities to its nearest species, Vibrio aerogenes and Vibrio mangrovi, are 97.6% and 96.0% respectively. Strain M62^T and V. aerogenes CECT 7868^T display ANI values well below the 95% boundary for genomic species.     

Highly soluble expression and molecular characterization of an organic solvent-stable and thermotolerant lipase originating from the metagenome

A novel organic solvent-stable and thermotolerant lipase gene (designated ostl28) was cloned from a metagenomic library and overexpressed in Escherichia coli BL21 (DE3) in soluble form. OSTL28 contained 262 amino acids with relative molecular mass 30.1 kDa and isoelectric point 9.7. The optimum pH and temperature of the OSTL28 were 7.5 and 60 °C, respectively. OSTL28 was stable in the pH range of 4.5–9.5 and at temperatures below 65 °C. The enzyme could hydrolyze a wide range of ρ-nitrophenyl esters, but its best substrate is ρ-nitrophenyl laurate with the highest activity of 236 U/mg (54,000 U/L). The recombinant OSTL28 was highly resisted to organic solvents, especially glycerol and methanol. The metal ions, with the exception of Hg²⁺ and Ag⁺, did not have any influence on enzyme activity, whereas non-ionic surfactants and Al³⁺ slightly activated the enzyme. These features indicate that it is a potential biocatalyst for biodiesel production.     

Lipase immobilization on O-propargyl and O-pentynyl dextrans and its application for the synthesis of click beetle pheromones

Lipase of Rhizopus arrhizus was immobilized on O-propargyl dextran (PgD) and O-pentynyl dextran (PyD). Compared with Lewatit VP OC 1600 cation ion exchange resin, wood shaves, fuller earth, silica and alumina, PgD with degree of substitution (DS) of 0.68 and a surface of 10 m²/g was found to be the most effective immobilization support and an excellent biocatalyst for esterification reactions in organic solvents as the synthesis of click beetle pheromone geranyl octanoate. PyD (DS 0.44) with a surface of 3.3 m²/g was of similar high efficiency. For the enzymatic esterification the optimum concentration of geraniol and octanoic acid was 0.4 mol L^?1 each. The biocatalyst worked the best in hexane at a moisture level of 0.02%. The enzyme could be repeatedly used and conversion dropped from 80% to 70% after four cycles, while reaction rate even increased when repeatedly employed.     

A novel enantioselective epoxide hydrolase from Agromyces mediolanus ZJB120203: Cloning,characterization and application

A new strain Agromyces mediolanus ZJB120203, capable of enantioselective epoxide hydrolase (EH) activity was isolated employing a newly established colorimetric screening and chiral GC analysis method. The partial nucleotide sequence of an epoxide hydrolase (AmEH) gene from A. mediolanus ZJB120203 was obtained by PCR using degenerate primers designed based on the conserved domains of EHs. Subsequently, an open reading frame containing 1167 bp and encoding 388 amino acids polypeptide were identified. Expression of AmEH was carried out in Escherichia coli and purification was performed by Nickel-affinity chromatography. The purified AmEH had a molecular weight of 43 kDa and showed its optimum pH and temperature at 8.0 and 35 °C, respectively. Moreover, this AmEH showed broad substrates specificity toward epoxides. In this study, it is demonstrated that the AmEH could unusually catalyze the hydrolysis of (R)-ECH to produce enantiopure (S)-ECH. Enantiopure (S)-ECH could be obtained with enantiomeric excess (ee) of >99% and yield of 21.5% from 64 mM (R,S)-ECH. It is indicated that AmEH from A. mediolanus is an attractive biocatalyst for the efficient preparation of optically active ECH.     

Intestinal and immunological effects of daily oral administration of Lactobacillus salivarius CECT5713 to healthy adults

There is an increasing interest in the intestinal and immunological effects of probiotics. The aim of the present study is to evaluate the tolerance and beneficial effects in healthy adults of the strain, Lactobacillus salivarius CECT5713 isolated from breast milk. A phase II, randomized, double-blinded, placebo-controlled human clinical trial was carried out in 40 healthy adults. The Probiotic group received a daily dose of 2 × 10⁸ CFU of L. salivarius CECT5713 in capsules during 4 weeks while volunteers of the control received only a placebo. Gastrointestinal and immunological parameters were analyzed. Results showed that L. salivarius CECT5713 was well tolerated and no adverse effects were detected. Consumption of the probiotic strain increased fecal lactobacilli counts (7.9 ± 0.1 vs. 7.05 ± 0.2 CFU/g feces, P = 0.001). Also, an improvement in the frequency of defecation (P = 0.04) was observed. Probiotic treatment induced significantly the percentage of NK cells and monocytes, as well as the plasmatic levels of immunoglobulins M, A and G, and the regulatory cytokine IL-10 (72.3 ± 11.7 in probiotic group vs. 27.3 ± 6.4 pg/mL in control group, P < 0.01). Thus, it can be concluded that daily administration of L. salivarius CECT5713 to healthy adults is safe and improve gut microbiota and different parameters related to immune response.     

β-Galactosidase of Aspergillus oryzae immobilized in an ion exchange resin combining the ionic-binding and crosslinking methods: Kinetics and stability during the hydrolysis of lactose

In this work, the hydrolysis kinetics of lactose by Aspergillus oryzae β-galactosidase was studied using the ionic exchange resin Duolite A568 as a carrier. The enzyme was immobilized using a β-galactosidase concentration of 16 g/L in pH 4.5 acetate buffer and an immobilization time of 12 h at 25 ± 0.5 °C. Next, the immobilized β-galactosidase was crosslinked using glutaraldehyde concentration of 3.5 g/L for 1.5 h. The influence of lactose concentration was studied for a range of 5–140 g/L, and the Michaelis–Menten model was fitted well to the experimental results with V_m and K_m values of 0.71 U and 35.30 mM, respectively. The influence of the product galactose as an inhibitor on the hydrolysis reaction was studied. The model that was best fitted to the experimental results was the competitive inhibition by galactose with V_m, K_m and K_i values of 0.77 U, 35.30 mM and 27.44 mM, respectively. The influence of temperature on the enzymatic activity of the immobilized enzyme was studied in the range of 10–80 °C, in which the temperature of the maximum activity was 60 °C, with an activation energy of 5.32 kcal/mol of lactose, using an initial concentration of lactose of 50 g/L in a pH 4.5 sodium acetate buffer solution. The thermal stability of the immobilized biocatalyst was determined to be in the range 55–65 °C. The first-order model described well the kinetics of thermal deactivation for all the temperatures studied. The activation energy of thermal deactivation from immobilized biocatalyst was 66.48 kcal/mol with a half-life of 8.9 h at 55 °C.     

Bio-resolution of a chiral epoxide using whole cells of Bacillus megaterium ECU1001 in a biphasic system

Optically active epoxides can be prepared by kinetic resolution of racemic mixtures using stereospecific epoxide hydrolases. To increase the bio-resolution efficiency of a sparingly water-soluble epoxide (glycidyl phenyl ether, GPE), we investigated the use of organic/aqueous two-phase system. Various conditions were systematically examined and optimized in shake flasks. Isooctane was found to be the most suitable solvent as the organic phase. The phase volume ratio (ϕ_o/w) and biocatalyst concentration were shown to be sensitive parameters affecting both the reaction rate and the enzyme enantiospecificity in the biphase system. An isooctane/aqueous system was developed to overcome the low solubility and instability of GPE in the aqueous phase, resulting in a significant improvement of enatiomeric ratio (E-value) from 39.5 to 94.0 and an average productivity of 18.8 mg GPE/(h g) biocatalyst to 48.9 mg GPE/(h g) biocatalyst, respectively. Resolution of a 90.1 g/l solution of racemic glycidyl phenyl ether in isooctane phase was successfully carried out in a mechanically stirred reactor (120 ml), affording (S)-glycidyl phenyl ether in high (100%) enantiomeric excess with a yield of 44.5%.     

Characterization of a recombinant Escherichia coli TOP10 [pQR239] whole-cell biocatalyst for stereoselective Baeyer–Villiger oxidations

This paper describes the kinetic characterization of a recombinant whole-cell biocatalyst for the stereoselective Baeyer–Villiger type oxidation of bicyclo[3.2.0]hept-2-en-6-one to its corresponding regio-isomeric lactones (−)-(1S,5R)-2-oxabicyclo[3.3.0]oct-6-en-3-one and (−)-(1R,5S)-3-oxabicyclo[3.3.0]oct-6-en-2-one. Escherichia coli TOP10 [pQR239], expressing cyclohexanone monooxygenase (CHMO) from Acinetobacter calcoaceticus (NCIMB 9871), was shown to be suitable for this biotransformation since it expressed CHMO at a high level, was simple to produce, contained no contaminating lactone hydrolase activity and allowed the intracellular recycle of NAD(P)H necessary for the biotransformation. A small-scale biotransformation reactor (20 ml) was developed to allow rapid collection of intrinsic kinetic data. In this system, the optimized whole-cell biocatalyst exhibited a significantly lower specific lactone production activity (55–60 μmol min⁻¹ g⁻¹ dry weight) than that of sonicated cells (500 μmol min⁻¹ g⁻¹ dry weight). It was shown that this shortfall was comprised of a difference in the pH optima of the two biocatalyst forms and mass transfer limitations of the reactant and/or product across the cell barrier. Both reactant and product inhibition were evident. The optimum ketone concentration was between 0.2 and 0.4 g l⁻¹ and at product concentrations above 4.5–5 g l⁻¹ the specific activity of the whole cells was zero. These results suggest that a reactant feeding strategy and in situ product removal should be considered in subsequent process design.     

Pyruvate producing biocatalyst with constitutive NAD-independent lactate dehydrogenases

Production of pyruvate from lactate through biocatalysis is a valuable process for its simple composition of reaction system and convenience of recovery. Biocatalyst with lactate-induced NAD-independent lactate dehydrogenases (iLDHs) can effectively catalyze lactate into pyruvate. To reduce the cost of biocatalyst preparation caused by indispensable lactate addition, the mutants with constitutive iLDH of Pseudomonas sp. XP-M2 were screened. Mutant XP-LM exhibited high iLDHs activities in minimal salt medium with cheap substrate glucose as the carbon source. The biocatalyst (8.2 g dry cell weight l⁻¹) containing 169.8 U l⁻¹ l-iLDH was prepared with 20 g 1⁻¹ glucose. The cost-effective biocatalyst prepared from the mutant XP-LM could efficiently catalyze lactate into pyruvate with high yield (0.961 mol mol⁻¹). Based on the different thermostability of d-iLDH and l-iLDH in the biocatalyst, whole cells of the strain might also have the potential in production of pyruvate and d-lactate from racemic lactate.     

Characterization of the N-oxygenase AurF from Streptomyces thioletus

AurF catalyzes the N-oxidation of p-aminobenzoic acid to p-nitrobenzoic acid in the biosynthesis of the antibiotic aureothin. Here we report the characterization of AurF under optimized conditions to explore its potential use in biocatalysis. The pH optimum of the enzyme was established to be 5.5 using phenazine methosulfate (PMS)/NADH as the enzyme mediator system, showing ∼10-fold higher activity than previous reports in literature. Kinetic characterization at optimized conditions give a K_m of 14.7 ± 1.1 μM, a k_cat of 47.5 ± 5.4 min⁻¹ and a k_cat/K_m of 3.2 ± 0.4 μM⁻¹ min⁻¹. PMS/NADH and the native electron transfer proteins showed significant formation of the p-hydroxylaminobenzoic acid intermediate, however H₂O₂ produced mostly p-nitrobenzoic acid. Alanine scanning identified the role of important active site residues. The substrate specificity of AurF was examined and rationalized based on the protein crystal structure. Kinetic studies indicate that the K_m is the main determinant of AurF activity toward alternative substrates.     

Biochemical and molecular characterization of a novel laccase from selective lignin-degrading white-rot fungus Echinodontium taxodii 2538

A novel laccase was isolated and characterized from a new selective lignin-degrading white-rot fungus Echinodontium taxodii 2538, in which a high yield of laccase was obtained. No laccase isoenzyme was detected in the synthetic liquid media. The purified laccase (designated as EtL2538) had an apparent molecular mass of 56 kDa, pI value of 3.1, and N-terminal amino acid sequence of GIGPVTDLHIVNAAV. EtL2538 showed optimum pH at 3.0 and optimum temperature at 60 °C using ABTS as the substrate. EtL2538 revealed superior thermostability, and retained over 80% of its original activity after incubation for 2 h at 50 °C. The laccase gene, etl2538, was also cloned and sequenced. This gene encoded a mature laccase protein containing 499 amino acids (aa) preceded by a signal peptide of 21 aa, and the deduced protein sequence contained four copper-binding conserved domains of typical laccase protein. EtL2538 was further used in lignin oxidation and dye decolorization. Even without the existence of redox mediators, EtL2538 could cleave the methoxyl groups and β-O-4 ether linkages in lignin from bamboo, and significantly decolorize malachite green and RBBR. These novel properties of EtL2538 may render it as a potential biocatalyst for biotechnological and environmental applications.     

A novel organic solvent-stable alkaline protease from organic solvent–tolerant Bacillus licheniformis YP1A

An organic solvent-stable alkaline protease producing bacterium was isolated from the crude oil contaminant soil and identified as Bacillus licheniformis. The enzyme retained more than 95% of its initial activity after pre-incubation at 40 °C for 1 h in the presence of 50% (v/v) organic solvents such as DMSO, DMF, and cyclohexane. The protease was active in a broad range of pH from 8.0 to 12.0 with the optimum pH 9.5. The optimum temperature for this protease activity was 60 °C, and the enzyme remained active after incubation at 50–60 °C for 1 h. This organic solvent-stable protease could be used as a biocatalyst for organic solvent-based enzymatic synthesis.     

Biotransformation of 3-cyanopyridine to nicotinic acid by free and immobilized cells of recombinant Escherichia coli

An efficient biocatalytic process for the production of nicotinic acid (niacin) from 3-cyanopyridine was developed using cells of recombinant Escherichia coli JM109 harboring the nitrilase gene from Alcaligenes faecalis MTCC 126. The freely suspended cells of the biocatalyst were found to withstand higher concentrations of the substrate and the product without any signs of substrate inhibition. Immobilization of the cells further enhanced their substrate tolerance, stability and reusability in repetitive cycles of nicotinic acid production. Under optimized conditions (37 °C, 100 mM Tris buffer, pH 7.5) for the immobilized cells, the recombinant biocatalyst achieved a 100% conversion of 1 M 3-cyanopyridine to nicotinic acid within 5 h at a cell mass concentration (fresh weight) of 500 mg/mL. The high substrate/product tolerance and stability of the immobilized whole cell biocatalyst confers its potential industrial use.     

Psychrophilic α-amylase from Aeromonas veronii NS07 isolated from farm soils

Among 120 isolates examined in this study, three isolates were selected for amylase production on starch agar plates following incubation at 10 °C. Identification by 16SrRNA on selected bacterium disclosed the highest similarity for protean regions of this gene as Aeromonas veronii NS07. A 63 kDa psychrophilic amylase enzyme from NS07 strain was purified by two-steps chromatography. The enzyme had the highest specific activity at pH 4 and was active at the range of temperatures from 0 to 50 °C, although the optimum temperature for enzyme activity was found at 10 °C. Analysis of the N-terminal amino acid sequencing disclosed 20 amino acids from purified amylase which had no similarity with other known α-amylases, indicating that the presented enzyme was novel. Amylase activity was enhanced in relation to optimum activity with the presence of sodium sulphate (161%), MnCl₂ (298%), CaCl₂ (175%), FeCl₂ (182%), MgCl₂ (237%), ZnCl₂ (169%), NiCl₂ (139%), NaCl (158%), each at 5 mM, while EDTA, phenylmethane sulphonylfluoride (PMSF) (3 mM), urea (8 M) and SDS (1%) inhibited the enzyme up to 5%, 2%, 80% and 18%, respectively. NS07 strain seems to be suitable as biocatalyst for practical use in liquefaction of starch at low temperatures, detergent and textile industries.     

Nitrogen uptake kinetics of Prymnesium parvum (Haptophyte)

The uptake rates of different nitrogen (N) forms (NO₃⁻, urea, and the amino acids glycine and glutamic acid) by N-deficient, laboratory-grown cells of the mixotrophic haptophyte, Prymnesium parvum, were measured and the preference by the cells for the different forms determined. Cellular N uptake rates (ρ_cell, fmol N cell⁻¹ h⁻¹) were measured using ¹⁵N-labeled N substrates. P. parvum showed high preference for the tested amino acids, in particular glutamic acid, over urea and NO₃⁻ under the culture nutrient conditions. However, extrapolating these rates to Baltic Seawater summer conditions, P. parvum would be expected to show higher uptake rates of NO₃⁻ and the amino acids relative to urea because of the difference in average concentrations of these substrates. A high uptake rate of glutamic acid at low substrate concentrations suggests that this substrate is likely used through extracellular enzymes. Nitrate, urea and glycine, on the other hand, showed a non-saturating uptake over the tested substrate concentration (1–40 μM-N for NO₃⁻ and urea, 0.5–10 μM-N for glycine), indicating slower membrane-transport rates for these substrates.