An immobilized Thiobacillus thioparus biosensing system for monitoring sulfide hydrogen; optimized parameters in a bioreactor

A microbial biosensing system for detection of hydrogen sulfide has been developed by using immobilized Thiobacillus thioparus TK-m in poly vinyl alcohol matrix, together with a dissolved oxygen sensor. Parameters of immobilization (poly vinyl alcohol concentration and amount of wet cell) were optimized by using statistical software. The obtained values for concentration of poly vinyl alcohol and wet cell weight were 11.3% (w/v) and 45 mg, respectively, where the response time of biosensor was 80 s. Calibration of oxygen concentration based on hydrogen sulfide concentration was investigated between 1 mg/L and 20 mg/L. The effect of pH and temperature were investigated in specific range of experimental conditions as well. Some parameters including operational stability and detection limit were studied in detail for characterization of biosensing system. In order to determine the operational stability, bio-sensing system at optimized working conditions was used to distinguish viability of microorganisms in polymer beads in period of time.     

A novel method for the immobilization of glucoamylase onto polyglutaraldehyde-activated gelatin

A novel method was developed for the immobilization of glucoamylase from Aspergillus niger. The enzyme was immobilized onto polyglutaraldehyde-activated gelatin particles in the presence of polyethylene glycol and soluble gelatin, resulting in 85% immobilization yield. The immobilized enzyme has been fully active for 30 days. In addition, the immobilized enzyme retained 90 and 75% of its activity in 60 and 90 days, respectively. The enzyme optimum conditions were not affected by immobilization and the optimum pH and temperature for free and immobilized enzyme were 4 and 65 °C, respectively. The kinetic parameters for the hydrolysis of maltodextrin by free and immobilized glucoamylase were also determined. The K_m values for free and immobilized enzyme were 7.5 and 10.1 g maltodextrin/l, respectively. The V_max values for free and immobilized enzyme were estimated as 20 and 16 μmol glucose/(min μl enzyme), respectively. The newly developed method is simple yet effective and could be used for the immobilization of some other enzymes.     

Amperometric biosensor based on a site-specific immobilization of acetylcholinesterase via affinity bonds on a nanostructured polymer membrane with integrated multiwall carbon nanotubes

Acetylcholinesterase (AChE) was immobilized on chemically modified poly-(acrylonitrile-methyl-methacrylate-sodium vinylsulfonate) membranes in accordance with three different methods, the first of which involved random enzyme immobilization via glutaraldehyde, the second one—site-specific enzyme immobilization via glutaraldehyde and Concanavalin A (Con A) and the third method—modified site-specific enzyme immobilization via glutaraldehyde in the presence of a mixture of multiwall carbon nanotubes and albumin (MWCNs + BSA), glutaraldehyde and Con A. Preliminary tests for the activity of immobilized AChE were carried out using these three methods. The third method was selected as the most efficient one for the immobilization of AChE and the prepared enzyme carriers were used for the construction of amperometric biosensors for the detection of acetylthiocholine (ATCh).A five level three factorial central composite design was chosen to determine the optimal conditions for the enzyme immobilization with three critical variables: concentration of enzyme, Concanavalin A and MWCNs. The design illustrated that the optimum values of the factors influencing the amperometric current were C_E: 70 U mL⁻¹; C_{Con A}: 1.5 mg mL⁻¹ and C_MWCN: 11 mg mL⁻¹, with an amperometric current 0.418 μA. The basic amperometric characteristics of the constructed biosensor were investigated. A calibration plot was obtained for a series of ATCh concentrations ranging from 5 to 400 μM. A linear interval was detected along the calibration curve from 5 to 200 μM. The correlation coefficient for this concentration range was 0.995. The biosensor sensitivity was calculated to be 0.065 μA μM⁻¹ cm⁻². The detection limit with regard to ATCh was calculated to be 0.34 μM. The potential application of the biosensor for detection and quantification of organophosphate pesticides was investigated as well. It was tested against sample solutions of Paraoxon. The biosensor detection limit was determined to be 1.39 × 10⁻¹² g L⁻¹ of Paraoxon, as well as the interval (10⁻¹¹ to 10⁻⁸ g L⁻¹) within which the biosensor response was linearly dependant on the Paraoxon concentration. Finally the storage stability of the enzyme carrier was traced for a period of 120 days. After 30-day storage the sensor retained 76% of its initial current response, after 60 days—68% and after 120 days—61%.     

Graft copolymerization of acrylamide on chitosan-co-chitin and its application for immobilization of Aspergillus sp. RL2Ct cutinase

The synthesis of chitosan (Chs) and chitin (Chi) copolymer and grafting of acrylamide (AAm) onto the synthesized copolymer have been carried out by chemical methods. The grafted copolymer was characterized by FTIR, SEM and XRD. The extracellular cutinase of Aspergillus sp. RL2Ct (E.C. 3.1.1.3) was purified to 4.46 fold with 16.1% yield using acetone precipitation and DEAE sepharose ion exchange chromatography. It was immobilized by adsorption on the grafted copolymer. The immobilized enzyme was found to be more stable then the free enzyme and has a good binding efficiency (78.8%) with the grafted copolymer. The kinetic parameters K_M and V_max for free and immobilized cutinase were found to be 0.55 mM and 1410 μmol min⁻¹ mg⁻¹ protein, 2.99 mM and 996 μmol min⁻¹ mg⁻¹ protein, respectively. The immobilized cutinase was recycled 64 times without considerable loss of activity. The matrix (Chs-co-Chi-g-poly(AAm)) prepared and cutinase immobilized on the matrix have potential applications in enzyme immobilization and organic synthesis respectively.     

Influence of whole microalgal cell immobilization and organic solvent on the bioconversion of androst-4-en-3,17-dione to testosterone by Nostoc muscorum

The use of free, immobilized and reused immobilized cells of the microalga Nostoc muscorum was studied for bioconversion of androst-4-en-3,17-dione (AD) to testosterone in hexadecane. Among polymers such as agar, agarose, κ-carrageenan, polyacrylamide, polyvinyl alcohol, and sodium alginate that were examined for cell entrapment, sodium alginate with a concentration of 2% (w/v) proved to be the proper matrix for N. muscorum cells immobilization. The bioconversion characteristics of immobilized whole algal cells at ranges of temperatures, substrate concentrations, and shaking speeds were studied followed by a comparison with those of free cells. The conditions were 30 °C, 0.5 g/L, and 100 rpm, respectively. The immobilized N. muscorum showed higher yield (72 ± 2.3%) than the free form (24 ± 1.3%) at the mentioned conditions. The bioconversion yield did not decrease during reuse of immobilized cells and remained high even after 5 batches of bioreactions while Na-alginate 3% was used; however, reuse of alginate 2% beads did not give a satisfactory result.     

A comparative performance evaluation of jute and eggshell matrices to immobilize pancreatic lipase

A pancreatic lipase was immobilized on readily available and inexpensive jute and eggshell matrices. The purity of extracted enzyme was confirmed by SDS-PAGE. The maximum protein load for eggshell was 10.23 mg/g, and for jute, it was 5.7 mg/g. The free enzyme activity retention was greater than 80% for eggshell and 43% for jute. The immobilized lipase was stable over a pH range from 7 to 8 for eggshell and 7.5 to 8.5 for jute with over a temperature range from 25 to 45 °C for eggshell and 37 to 40 °C for the jute. FTIR data indicated new bonds on the jute upon immobilization. Although no new bond was observed, immobilization data on eggshell fit well with the Langmuir adsorption isotherm model. The model constants, Γ_max and K_l, were 13.92 mg/g and 0.382 mL/mg, respectively. Mixed adsorption with both ionic and hydrophobic interactions was observed. Lipase adsorption was reduced significantly in presence of Tween 80, whereas the effect was less in case of ionic strength, pH and temperature. For both matrices, scanning electron microscopy (SEM) was used to demonstrate the changes in surface morphology after immobilization. The performance of eggshell was better than that of jute as a matrix for immobilizing pancreatic lipase.     

Enhancing performance of lipase immobilized on methyl-modified silica aerogels at the adsorption and catalysis processes: Effect of cosolvents

Hydrophobic silica aerogels modified with methyl group were applied as support to immobilize Candida rugosa lipase (CRL). At the adsorption process, different alcohols were used to intensify the immobilization of CRL. The results showed that n-butanol wetting the hydrophobic support prior to contacting with enzyme solution could promote lipase activity, but the adsorption quantity onto the support decreased. Based on this, a novel immobilization method was proposed: the support contacted with enzyme solution without any alcohols, and then the immobilized enzymes were activated by 90% (V) n-butanol solution. The experimental results showed that this method could keep high adsorption quantity (413.0 mg protein/g support) and increase the lipase specific activity by more than 50%. To improve the stability of immobilized lipase, the support after adsorption was contacted with n-octane to form an oil layer covering the immobilized lipases, thus the leakage can be decreased from over 30–4% within 24 h. By utilizing proper cosolvents, a high enzyme activity and loading capacity as well as little loss of lipase was achieved without covalent linkage between the lipase and the support. This is known to be an excellent result for immobilization achieved by physical adsorption only.     

Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.     

Geranyl acetate synthesis catalyzed by Thermomyces lanuginosus lipase immobilized on electrospun polyacrylonitrile nanofiber membrane

Isolated Thermomyces lanuginosus lipase (TLL) was immobilized by different protocols on the polyacrylonitrile nanofibers membrane. The conditions for immobilization of TLL were optimized by investigating effect of protein concentration, time and temperature on the extent of immobilization. The effect of immobilization on the catalytic activity and stability of lipase was studied thoroughly. The immobilized TLL was used as biocatalyst for geranyl acetate synthesis with geraniol and vinyl acetate as substrates and their performance was compared with free enzyme. The TLL immobilized by physical adsorption shows higher transesterification and hydrolytic activities than that of covalently linked or native TLL. There was 32 and 9 fold increase in transesterification activity of TLL immobilized by adsorption and covalent bonding, while hydrolytic activity increases only by 3.6 and 1.8 fold respectively. The optimum conditions for immobilization in both the cases were immobilization time 90–150 min, temperature 45 °C and protein concentration of 2 mg/ml. The percentage conversion of ester was more than 90% and 66% in case of physically adsorbed and covalently bonded enzyme respectively as compared to native one. However, covalently immobilized TLL shows higher operational stability than native and physically adsorbed TLL.     

α-Amylase immobilization on gelatin: Optimization of process variables

α-Amylase was extracted and purified from soybean seeds to apparent homogeneity by affinity precipitation. The homogeneous enzyme preparation was immobilized on gelatin matrix using glutaraldehyde as an organic hardener. Response surface methodology (RSM) and 3-level-3-factor Box–Behnken design was employed to evaluate the effects of immobilization parameters, such as gelatin concentration, glutaraldehyde concentration and hardening time on the activity of immobilized α-amylase. The results showed that 20% gelatin (w/v), 10% glutaraldehyde (v/v) and 1 h hardening time yielded an optimum immobilization of 82.5%.     

Activation of nylon net and its application to a biosensor for determination of glucose in human serum

A glucose biosensor using a glucose oxidase (GO_x)-immobilized nylon net with glutaraldehyde as cross-linking reagent and an oxygen (O₂) electrode for the determination of glucose has been fabricated. The detection scheme was based on the utilization of dissolved O₂ in oxidation of glucose by the membrane bound GO_x. Crucial factors including O-alkylation temperature, reaction times of nylon net with dimethyl sulfate, l-lysine, and glutaraldehyde, and enzyme loading were examined to determine the optimal enzyme immobilization conditions for the best sensitivity of the developed glucose biosensor. In addition, the effects of pH and concentration of phosphate buffer on the response of the biosensor were studied. The glucose biosensor had a linear range of 18 μM to 1.10 mM with the detection limit of 9.0 μM (S/N = 3) and response time of 80 s. The biosensor exhibited both good operational stability with over 200 measurements and long-term storage stability. The results from this biosensor compared well with those of a commercial glucose assay kit in analyzing human serum glucose samples.     

Reversible immobilization of catalase on fibrous polymer grafted and metal chelated chitosan membrane

Poly(itaconic acid) grafted and/or Fe(III) ions incorporated chitosan membranes were used for reversible immobilization of catalase (from bovine liver) via adsorption. The influences of pH and initial catalase concentration on the immobilization capacities of the CH-g-poly(IA) and CH-g-poly(IA)-Fe(III) membranes have been investigated in a batch system. Maximum catalase adsorption onto CH-g-poly(IA) and CH-g-poly(IA)-Fe(III) membrane were found to be 6.3 and 37.8 mg/g polymer at pH 5.0 and 6.5, respectively. The CH-g-poly(IA)-Fe(III) membrane with high catalase adsorption capacity was used in the rest of the study. The K_m value for immobilized catalase on CH-g-poly(IA)-Fe(III) (25.8 mM) was higher about 1.6-fold than that of free enzyme (13.5 mM). Optimum operational temperature was observed at 40 °C, a 5 °C higher than that of the free enzyme and was significantly broader. The optimum operational pH was same for both free and immobilized catalase (pH 7.0). Thermal stability was found to increase with immobilization. Free catalase lost all its activity within 20 days whereas immobilized catalase lost 23% of its activity during the same incubation period. It was observed that the same support enzyme can be repeatedly used for immobilization of catalase after regeneration without significant loss in adsorption capacity or enzyme activity. In addition, the CH-g-poly(IA)-Fe(III) membrane prepared in this work showed promising potential for various biotechnological applications.     

Enhancing oxidation activity and stability of iso-1-cytochrome c and chloroperoxidase by immobilization in nanostructured supports

The immobilization of enzymes in inorganic materials has been widely used because it can produce an enhancement of the catalytic stability and enzymatic activity. In this article, the effect of the immobilization of iso-1-cytochrome c (CYC-Sc) from Saccharomyces cerevisiae and chloroperoxidase (CPO) from Caldariomyces fumago on the enzyme stability and catalytic oxidation of styrene was studied. The immobilization was carried out in three silica nanostructured supports with different pore size MCM-41 (3.3 nm), SBA-15 (6.4 nm) and MCF (12.1 nm). The adsorption parameters and leaching degree of immobilized enzymes were determined. Catalytic parameters of immobilized and free enzymes were determined at different temperatures (20–60 °C) and in different acetonitrile/water mixtures (15–85% of acetonitrile). The results show that there is low leaching of the enzymes in the three supports assayed and the adsorption capacity (q_max) was higher as the pore size of the support increased. The pore size also produces the enhancement of peroxidase activities on the styrene oxidation. Thus, CPO adsorption into SBA-15 and MCF showed remarkable thermal and solvent stabilities at 40 °C showing a total turnover numbers of 48,000 and 54,000 times higher than free CPO, respectively. The enhancement of activity and stability doubtless is interesting for the potential industrial use of peroxidases.     

Enzymatic transformation of 2-O-α-d-glucopyranosyl-l-ascorbic acid (AA-2G) by immobilized α-cyclodextrin glucanotransferase from recombinant Escherichia coli

This work aims to produce 2-O-α-d-glucopyranosyl-l-ascorbic acid (AA-2G) from ascorbic acid and β-cyclodextrin with immobilized α-cyclodextrin glucanotransferase (α-CGTase) from recombinant Escherichia coli. Molecular sieve (SBA-15) was used as an adsorbent, and sodium alginate was used as a carrier, and glutaraldehyde (GA) was used as a cross-linker. The effects of several key variables on α-CGTase immobilization were examined, and optimal immobilization conditions were determined as the following: glutaraldehyde (GA, cross-linker) 0.01% (v/v), SBA-15 (adsorbent) 2 g/L, CaCl₂ 3 g/L, sodium alginate 20 g/L, adsorption time 3 h, and immobilization time 1 h. In comparison with free α-CGTase, immobilized α-CGTase had a similar optimal pH (5.5) and a higher optimal temperature (45 °C). The continuous production of AA-2G from ascorbic acid and β-cyclodextrin in the presence of immobilized α-CGTase was carried out, and the highest AA-2G production reached 21 g/L, which was 2-fold of that with free α-CGTase. The immobilization procedure developed here was efficient for α-CGTase immobilization, which was proved to be a prospective approach for the enzymatic production of AA-2G.     

Effect of kinesthetic illusion induced by visual stimulation on muscular output function after short-term immobilization

Kinesthetic illusions by visual stimulation (KiNVIS) enhances corticomotor excitability and activates motor association areas. The purpose of this study was to investigate the effect of KiNVIS induction on muscular output function after short-term immobilization. Thirty subjects were assigned to 3 groups: an immobilization group, with the left hand immobilized for 12 h (immobilization period); an illusion group, with the left hand immobilized and additionally subjected to KiNVIS of the immobilized part during the immobilization period; and a control group with no manipulation. The maximum voluntary contraction (MVC), fluctuation of force (force fluctuation) during a force modulation task, and twitch force were measured both before (pre-test) and after (post-test) the immobilization period. Data were analyzed by performing two-way (TIME × GROUP) repeated measures ANOVA. The MVC decreased in the immobilization group only (pre-test; 37.8 ± 6.1 N, post-test; 32.8 ± 6.9 N, p < 0.0005) after the immobilization period. The force fluctuation increased only in the immobilization group (pre-test; 2.19 ± 0.54%, post-test; 2.78 ± 0.87%, p = 0.007) after the immobilization period. These results demonstrate that induction of KiNVIS prevents negative effect on MVC and force fluctuation after 12 h of immobilization.     

Efficient decolorization of an anthraquinone dye by recombinant dye-decolorizing peroxidase (rDyP) immobilized in silica-based mesocellular foam

A recombinant dye-decolorizing peroxidase (rDyP) produced from Aspergillus oryzae was immobilized in synthesized silica-based mesocellular foam (MCF: average pore size 25 nm) and used for decolorization of the anthraquinone dye, Remazol Brilliant Blue R (RBBR). The adsorption yields of rDyP immobilized in MCF increased as the pH decreased from 6 to 3. However, the activity yields of the immobilized rDyP decreased with decreasing pH. The overall efficiency, defined as adsorption yield × activity yield, reached its maximum of 83% at pH 5. In repeated dye-decolorization tests, 20 batches of RBBR could be decolorized by the MCF-immobilized rDyP. MCF showed significantly better performance for rDyP immobilization in term of retaining enzyme activity and dye-decolorization ability compared to previous studies using other mesoporous materials.     

Development of glucose biosensor based on reconstitution of glucose oxidase onto polymeric redox mediator coated pencil graphite electrodes

In this study, a novel glucose biosensor was fabricated by reconstitutional immobilization of glucose oxidase (GOx) onto a poly(glycidyl methacrylate-co-vinylferrocene) (poly(GMA-co-VFc)) film coated pencil graphite electrode (PGE). The amperometric current response of poly(GMA-co-VFc)-GOx to glucose is linear in the concentration range between 1 and 16 mM (correlation coefficient of 0.9998) with a detection limit of 2.7 μM (S/N = 3). Experimental parameters were studied in detail and optimized, including the pH and temperature governing the analytical performance of the biosensor. The stability and reusability of the biosensor as well as its kinetic parameters have also been studied.     

Enhanced plasmid stability and production of hEGF by immobilized recombinant E. coli JM101

Recombinant Escherichia coli JM101 was immobilized with porous polyurethane foam (PUF) particle as supporter matrix for human epidermal growth factor (hEGF) production. Flask culture showed that cell immobilization in PUF can improve cell growth and hEGF expression. A bubble column and a three-phase fluidized bed bioreactor by self-design was further applied to produce hEGF, respectively. The results demonstrated that PUF is a feasible immobilized supporter material with good biocompatibility. Immobilization could also decrease the probability for segregational plasmid loss and overgrowth of plasmid-free cells. Cell density, plasmid stability and hEGF productivity were higher than those without the foam matrix, respectively. hEGF productivity was enhanced from 8.73 mg/l h of free-culture to 11.4 mg/l h of immobilized cultivation.     

A novel electrochemical biosensor based on horseradish peroxidase immobilized on Ag-nanoparticles/poly(l-arginine) modified carbon paste electrode toward the determination of pyrogallol/hydroquinone

A novel electrochemical biosensor for the determination of pyrogallol (PG) and hydroquinone (HQ) has been constructed based on the poly l-arginine (poly(l-Arg))/carbon paste electrode (CPE) immobilized with horseradish peroxidase (HRP) and silver nanoparticles (AgNPs) through the silica sol–gel (SiSG) entrapment. The electrochemical properties of the biosensor were characterized by employing the electrochemical techniques. The proposed biosensor showed a high sensitivity and fast response toward the determination of PG and HQ around 0.18 V. Under the optimized conditions, the anodic peak current of PG and HQ was linear with the concentration range of 8 μM to 30 × 10^?5 M and 1–150 μM. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 6.2 μM, 20 μM for PG and 0.57 μM, 1.92 μM for HQ respectively. The electrochemical impedance spectroscopy (EIS) studies have confirmed that the occurrence of electron transfer at HRP-SiSG/AgNPs/poly(l-Arg)/CPE was faster. Moreover the stability, reproducibility and repeatability of the biosensor were also studied. The proposed biosensor was successfully applied for the determination of PG and HQ in real samples and the results were found to be satisfactory.     

Isolation and immobilization of alkaline protease on mesoporous silica and mesoporous ZSM-5 zeolite materials for improved catalytic properties

Alkaline protease from brinjal leaf (Solanum melongena) having milk clotting activity has been purified to 9.44 fold to a final specific activity of 45.71 U/mg. SDS-PAGE of the final preparation revealed a single protein band of approx 14 kDa. Purified enzyme was characterized and was successfully immobilized into the amorphous mesoporous silica (SBA-15) and crystalline mesoporous zeolite (Nano-ZSM-5) using entrapment method. Maximum immobilization of 63.5% and 79.77% was obtained with SBA-15 and Nano-ZSM-5, respectively. This protocol serves as a novel approach for bioprocesses, mainly as milk coagulant for local dairy products and particularly, cheese making, and opens the new dimension of further research and other innovation.