Growth of human mesenchymal stem cells (MSCs) on films of enzymatically modified chitosan

Mesenchymal stem cells (MSCs) are known to be an attractive cell source for tissue engineering and regenerative medicine. One of the main limiting steps for clinical use or biotechnological purposes is the expansion step. The research of compatible biomaterials for MSCs expansion is recently regarded as an attractive topic. The aim of this study was to create new functional biomaterial for MSCs expansion by evaluating the impact of chitosan derivative films modified by enzymatic approach. First, chitosan particles were enzymatically modified with ferulic acid (FA) or ethyl ferulate (EF) under an eco‐friendly procedure. Then, films of chitosan and its modified derivatives were prepared and evaluated by physicochemical and biological properties. Results showed that the enzymatic grafting of FA or EF onto chitosan significantly increased hydrophobic and antioxidant properties of chitosan films. The MSCs cell viability on chitosan derivative films also increased depending on the film thickness and the quantity of grafted phenols. Furthermore, the cytotoxicity test showed the absence of toxic effect of chitosan derivative films towards MSCs cells. Cell morphology showed a well attached and spread phenotype of MSCs cells on chitosan derivative films. On the other hand, due to the higher phenol content of FA‐chitosan films, their hydrophobic, antioxidant properties and cell adhesion were improved in comparison with those of EF‐chitosan films. Finally, this enzymatic process can be considered as a promising process to favor MSCs cell growth as well as to create useful biomaterials for biomedical applications especially for tissue engineering. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:491–500, 2016     

Improved blood biocompatibility of composite film of chitosan/carbon nanotubes complex

Single-walled carbon nanotubes are novel molecular-scale wires having excellent anti-adhesion properties with regard to platelets. On the other hand, chitosan is a partially de-acetylated derivative of chitin that has a critical role in cell attachment and growth. The aim of this study was to investigate how carbon nanotubes improve the blood biocompatibility of chitosan film. We prepared composite films with various concentrations of chitosan/carbon nanotubes (CS/CNTs) (1.3–6.3 wt%). The sample surfaces were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The surface characterization revealed that the surface of the CS/CNTs composite film became more hydrophobic with increasing amounts of CNTs. Cell attachment tests using bovine aortic endothelial cells (BAECs) indicated that CS/CNTs composite films retained their cell adhesion ability. The blood compatibility of the CS/CNTs composite films was evaluated using the blood platelet adhesion and activation tests in vitro. Platelet adhesion results confirmed that platelet adhesion and the formation of a platelet network were inhibited on composite films with higher concentrations of CNTs (5.1 wt%). Our experimental results show that the novel composite film containing CS/CNTs possesses two paradoxical characteristics, namely, good adherence of endothelial cells and minimum adherence and activation of platelets, making this film a promising antithrombogenic material for use in the biomedical field.     

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

A new amphiphilic chitosan derivative, octanoylchitosan cinnamate (OCC) was synthesized through regioselective modifications of chitosan. A solution of OCC was spread to water to form a stable monolayer at the air/water interface. The surface pressure (π)–area (A) isotherm indicated that the polymer had a limiting area of about 100 Å² per repeat unit. YZ-type multilayers were deposited onto hydrophobic substrates through Langmuir–Blodgett (LB) technique. The structural features of the LB films were investigated by UV absorption, circular dichroism (CD) and linear dichroism (LD) spectroscopy. The results showed that the intrinsic chirality originating from the helical order of the OCC backbones was maintained in the LB films. Besides, the polymer backbones were uni-axially oriented in the LB film. The ordered structures of OCC assembled in a dilute solution and in a cast film were also investigated and the results were compared with that of the LB film.     

Growth and osteogenic differentiation of adipose-derived and bone marrow-derived stem cells on chitosan and chitooligosaccharide films

Very low molecular weight chitooligosaccharide (COS, 1.4 kDa) and high molecular weight chitosan (1000 kDa) were comparatively studied in terms of physical and biological characteristics. Thin films of COS, chitosan and gelatin were prepared and crosslinked by dehydrothermal treatment at 140 °C for 24 h. COS film presented more hydrophilic property than chitosan film. Behaviors of rat adipose-derived stem cells (ASCs) and bone marrow-derived stem cells (MSCs) were investigated on COS and chitosan films, comparing to those on gelatin film. The results on cell spreading suggested that both ASCs and MSCs preferred to attach on COS film than chitosan film with 6–7 times larger cell areas. Numbers of both stem cells proliferated on COS film were approximately 3-fold higher than those on chitosan film. In addition, COS film enhanced osteogenic differentiating potential of MSCs, as observed from the alkaline phosphatase activity and calcium deposition. Therefore, in this work, COS was shown to be a more favorable material for the growth and osteogenic differentiation of both ASCs and MSCs, compared to high molecular weight chitosan.     

Chitosan nanofiber scaffold enhances hepatocyte adhesion and function

To enhance cell attachment and promote liver functions of hepatocytes cultured in bioreactors, a chitosan nanofiber scaffold was designed and prepared via electrospinning. Effects of the scaffold on hepatocyte adhesion, viability and function were then investigated. Data showed that hepatocytes on chitosan nanofiber scaffold exhibited better viability and tighter cell-substrate contact than cells on regular chitosan film. In addition, urea synthesis, albumin secretion and cytochrome P450 activity of hepatocytes on chitosan nanofiber scaffold were all 1.5 to 2 folds higher than the controls. Glycogen synthesis was also increased as compared with the controls. These results suggested the potential application of this chitosan nanofiber scaffold as a suitable substratum for hepatocyte culturing in bioreactors.     

Adhesion dynamics, morphology, and organization of 3T3 fibroblast on chitosan and its derivative: the effect of O-carboxymethylation

Chitosan and O-carboxymethylchitosan (OCMCS) have been proved to have biocompatibility and have been extensively researched in the field of biomaterials. In this study, Confocal-reflectance interference contrast microscopy (C-RICM) in conjunction with phase contrast imaging was used to investigate the adhesion contact dynamics of 3T3 fibroblasts on chitoan and OCMCS surface-modified silica coverslips. The C-RICM results demonstrate that the weak cell contact forms on OCMCS surface while a much stronger contact area forms on the chitosan surface. 3T3 fibroblasts are found to spread randomly with spindlelike morphology on the chitosan surface, while they exhibit elongated morphology and align on the OCMCS surface. It is believed that fibroblast behaviors such as migration, spreading with an elongated morphology, and alignment on the OCMCS surface are correlated with the weak cell contact. The mechanisms to form cell adhesion contact on chitosan and OCMCS were discussed.     

通过研究改性壳聚糖与细胞的相互作用评价其生物相容性

利用细胞生物学的方法, 研究了四种不同的细胞在经过改性的壳聚糖（ＣＨＩＴＯＳＡＮ） 膜上的生长,测定了细胞相对黏附力、细胞初始黏附率, 并利用ＦＤＡ 实验测定了细胞活力,从而从多个方面评价了这几种不同材料的生物相容性。实验结果表明,与明胶交联的壳聚糖膜明显比其它两种膜有利于细胞的黏附和生长,为进一步对材料进行筛选奠定了基础。     

A chemical surface modification of chitosan by glycoconjugates to enhance the cell-biomaterial interaction

The use of wheat germ agglutinin (WGA), a lectin molecule, to modify chitosan and enhance the cell-biomaterial interaction was examined. The percentage of living fibroblast cells on the surfaces of tissue culture polystyrene (TCPS) control, WGA-modified chitosan, and unmodified chitosan films increased to 99%, 99%, and 85%, respectively, after seeding for 48 h. DNA staining revealed that a portion of fibroblasts cultivated on chitosan films( )were undergoing apoptosis. In contrast, fibroblasts growing on WGA-modified chitosan film surfaces did not show any indication of apoptosis. The number of fibroblast cells was the highest on the WGA-modified chitosan surfaces, followed by the TCPS and unmodified chitosan surfaces. This WGA-mediated enhancement on the fibroblast cell-biomaterial interaction was cell type dependent. Other types of cells may need different lectin molecules for enhanced interaction with biomaterials. Further, the evaluation of the heat shock protein (HSP) mRNA expression indicated that HSP 90 expression was increased in the fibroblast cells cultivated on chitosan films and decreased to basal levels on the WGA-modified chitosan films. Taken together, our data suggest that the use of WGA and other lectin molecules to enhance the cell-biomaterial interaction via oligosaccharide-mediated cell adhesion is a promising way to improve cell adhesion and proliferation, the two key issues in tissue engineering.     

Inhibitory effects of vitamin E on endothelial-dependent adhesive interactions with leukocytes induced by oxidized low density lipoprotein

Leukocyte-endothelial cell interactions, which are mediated by various adhesion molecules, are a crucial event in inflammatory reactions including atherosclerosis. Alpha-tocopherol (alpha-Toc) has been used for protection and therapy of vascular diseases because of its antioxidant activity. The objective of the present study was to determine effect of alpha-Toc on endothelial-dependent adhesive interactions with leukocytes elicited by oxidized low density lipoprotein (oxLDL). Incubation of HUVEC with oxLDL (100 microg/mL) increased expression of proteins and messenger RNA of intercellular adhesion molecule-1 (ICAM-1) and vascular cell adhesion molecule-1 (VCAM-1) on enzyme immunoassay and northern blotting assay; pretreatment with alpha-Toc reduced in a dose dependent manner. Adherence of polymorphonuclear leukocytes (PMN) or mononuclear leukocytes (MNC) to oxLDL-activated HUVEC was much increased compared with that to unstimulated HUVEC. Treatment of HUVEC with alpha-Toc, monoclonal antibody to ICAM-1 or VCAM-1 inhibited adherence of PMN or MNC in a dose dependent manner. These results suggest that alpha-Toc works as anti-atherogenic agent through inhibiting endothelial-dependent adhesive interactions with leukocytes induced by oxLDL.     

Condensed state structure and biocompatibility of the konjac glucomannan/chitosan blend films

Specialised blend films have been prepared by blending 1% w/v konjac glucomannan aqueous with 1% w/v chitosan solution in acetate solution and drying at room temperature for 24 h. The condensed state structure and miscibility of the blend films were studied by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, and wide-angle X-ray diffraction. The results indicated that the blend film obtained from an 80/20 mixing ratio of konjac glucomannan and chitosan derivate showed the highest miscibility and blend homogeneity, and that strong intermolecular hydrogen bonds took place between the amino groups of chitosan and the hydroxyl groups of konjac glucomannan; thus the tensile strength also achieved its maximum in this ratio. The cell morphologies on the pure and blend films were examined by light microscopy and cell viability was studied by using MTT assay. The results showed that the particular blend film was more suitable for the cell culture than the pure konjac glucomannan film, and that the cells cultured on this blend film had greater spreading coefficients than that of the pure konjac glucomannan film. As a result of the good mechanical properties, miscibility and biocompatibility, the blend film is a promising biomaterial matrix.     

Effect of spatial architecture on cellular colonization

The spatial cell-material interaction remains vital issue in forming biodegradable scaffolds in Tissue Engineering. In this study, to understand the influence of spatial architecture on cellular behavior, 2D and 3D chitosan scaffolds of 50-190 kD and >310 kD MW were synthesized through air drying and controlled rate freezing/lypohilization technique, respectively. In addition, chitosan was emulsified with 19, 76, and 160 kD 50:50 poly lactide-co-glycolide (PLGA) using 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC) as stabilizer. 2D and 3D scaffolds were formed by air drying and lyophilization as before. Tensile and compressive properties of films and scaffolds were analyzed in wet conditions at 37 degrees C. Alterations in the cell spreading, proliferation, and cytoskeletal organization of human umbilical vein endothelial cells (HUVECs) and mouse embryonic fibroblasts (MEFs) were studied. These results showed that the formed 3D chitosan scaffolds had interconnected open pore architecture (50-200 microm size). HUVECs and MEFs had reduced spreading areas and circular morphology on 2D chitosan membranes compared with 3D chitosan scaffolds. The fluorescence photomicrographs for actin (using Alexa Fluor 488 phalloidin) and cytoplasm staining (using carboxyfluorescein diacetate-succinimidyl ester) demonstrated that the cells spread within 3D chitosan matrix. 2D and 3D emulsified chitosan and chitosan/PLGA scaffolds reduced the spreading of HUVECs and MEFs even further. Proliferation results, analyzed via MTT-Formazan assay and BrdU uptake assay, correlated with the spreading characteristics. The reductions in cell spreading area on emulsified surfaces were not detrimental to the viability and endocytic activity but to proliferation. The observed alterations in cellular colonization are in part due to the substrate stiffness and surface topography. In summary, these results suggest a significant influence of spatial architecture on cellular colonization.     

Polydimethylsiloxane Films Modified with Chitosan/Pectin Multilayers as Scaffolds for Mesenchymal Stem Cells

Solid (smooth) and porous films of polydimethylsiloxane (PDMS) have been obtained; the effect of their structure on the adhesion of mesenchymal stem cells (MSCs) on their surface was found. It is shown that modification of these films with a (chitosan/pectin)₄ multilayer increased the efficiency of viable cell adhesion. A (3-aminopropyl)triethoxysilane–glutaraldehyde system was used to enhance the binding of the polysaccharide layer to the hydrophobic surface of PDMS. It was found that MSCs formed a monolayer culture of the fibroblast-like cells with high viability on porous PDMS modified with (chitosan/pectin)₄.     

Cell Adhesion and Proliferation on Sulfonated and Non-Modified Chitosan Films

Three types of chitosan-based films have been prepared and evaluated: a non-modified chitosan film bearing cationizable aliphatic amines and two films made of N-sulfopropyl chitosan derivatives bearing both aliphatic amines and negative sulfonate groups at different ratios. Cell adhesion and proliferation on chitosan films of C2C12 pre-myoblastic cells and B16 cells as tumoral model have been tested. A differential cell behavior has been observed on chitosan films due to their different surface modification. B16 cells have shown lower vinculin expression when cultured on sulfonated chitosan films. This study shows how the interaction among cells and material surface can be modulated by physicochemical characteristics of the biomaterial surface, altering tumoral cell adhesion and proliferation processes.     

In situ immobilization of proteins and RGD peptide on polyurethane surfaces via poly(ethylene oxide) coupling polymers for human endothelial cell growth

A "CBABC"-type pentablock coupling polymer, mesylMPEO, was designed and synthesized to promote human endothelial cell growth on the surfaces of polyurethane biomaterials. The polymer was composed of a central 4,4'-methylenediphenyl diisocyanate (MDI) coupling unit and poly(ethylene oxide) (PEO) spacer arms with methanesulfonyl (mesyl) end groups pendent on both ends. As the presurface modifying additive (pre-SMA), the mesylMPEO was noncovalently introduced onto the poly(ether urethane) (PEU) surfaces by dip coating, upon which the protein/peptide factors (gelatin, albumin, and arginine-glycine-aspartic acid tripeptide [RGD]) were covalently immobilized in situ by cleavage of the original mesyl end groups. The pre-SMA synthesis and PEU surface modification were characterized using nuclear magnetic resonance spectroscopy ((1)H NMR), attenuated total reflection infrared spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). Human umbilical vein endothelial cells (HUVEC) were harvested manually by collagenase digestion and seeded on the modified PEU surfaces. Cell adhesion ratios (CAR) and cell proliferation ratios (CPR) were measured using flow cytometry, and the individual cell viability (ICV) was determined by MTT assay. The cell morphologies were investigated by optical inverted microscopy (OIM) and scanning electrical microscopy (SEM). The gelatin- and RGD-modified surfaces were HUVEC-compatible and promoted HUVEC growth. The albumin-modified surfaces were compatible but inhibited cell adhesion. The results also indicated that, for HUVEC in vitro cultivation, the cell adhesion stage was of particular importance and had a significant impact on the cell responses to the modified surfaces.     

Surface structure of chitosan and hybrid chitosan-amylose films-restoration of the antibacterial properties of chitosan in the amylose film

The surface structure of films prepared by casting aqueous solutions of mixtures of water soluble chitosan (WSC) and amylose as well as a fully deacetylated chitosan was studied. Zeta potential measurements indicated that the surface of WSC and fully deacetylated chitosan films is positively charged but very weakly, whereas, a film of amylose blended with WSC exhibited an obvious positive charge. X-ray photoelectron spectra of these films suggest that less amino groups are exposed on the surface of WSC and fully deacetylated chitosan films, whereas, more amino groups are exposed on the surface of a WSC film blended with amylose. A sheet structure in which free amino groups are less exposed on the surface of the film of WSC or fully deacetylated chitosan is proposed. This accounts for the loss of antibacterial activity of chitosan on the WSC film surface. When blended with amylose, the morphology of the film may be disrupted, resulting in strong antibacterial properties.     

Preparation and characteristics of novel porous hydrogel films based on chitosan and glycerophosphate

In this study, we prepared thermosensitive hydrogels by adding α-β-glycerophosphate (α-β-GP) to chitosan (CS) solutions. Then the hydrogels were dried to form films at room temperature. Scanning electron microscope (SEM) revealed that the hydrogel films had rough surfaces and porous cross-sections. Compared with pure chitosan films, the CS/GP hydrogel films showed better elasticity and lower tensile strength. Contact angle studies indicated that all these materials have good hydrophilicity. The CS/GP hydrogel films exhibited higher protein adsorption against both negatively charged protein (bovine serum albumin) and positively charged protein (lysozyme) than pure chitosan films. The results of MTT assay performed with the extracts of the CS/GP hydrogel films revealed the films had nontoxicity. The mouse embryonic fibroblast cells cultured on the CS/GP hydrogel films had good spreading and no apparent impairment of cell morphology. The results indicated that the CS/GP hydrogel film could be a promising candidate biomaterial for biomedicine applications.     

Effect of molecular weight of chitosan on antimicrobial properties and tissue compatibility of chitosan-impregnated bacterial cellulose films

Bacterial cellulose-chitosan (BC-C) films were developed by immersing purified BC pellicles in 1.5 ~ 2.0% (w/v) acetic acid solutions containing chitosan of varying molecular weights. Effects of different molecular weight of chitosan on physical, biological and antimicrobial properties of the composite films were investigated. The cumulative chitosan absorption capacities with M_w of 141,000, 199,000, and 263,000 were 38.43, 24.65, and 23.89 mg/cm³ of dry BC film, respectively. The cumulative release profiles of chitosan from the films strongly depended on molecular weight of chitosan and pH of solution. The order of release of chitosan from the BC-C films was dependent on molecular weight as follows: M_w 141,000 > M_w 199,000 > M_w 263,000. All BC-C films showed the antimicrobial abilities against Staphylococcus aureus and Aspergillus niger but had no inhibitory effect on the growth of Escherichia coli. The BC-C films supported for adhesion, spreading and proliferation of both human skin keratinocytes and fibroblasts. The antibacterial activity against S. aureus of the BC-C with the highest Mw chitosan (263,000) was higher than those of the others. On the other hand, the BC-C films with the lowest M_w chitosan (141,000) promoted the growth of human skin cells more than those of the others.     

Effects of different forms of chitosan on intercellular junctions of mouse fibroblasts in vitro

Chitosan is a linear polysaccharide that has many biomedical applications. We compared the effects of chitosan, in both solution and membranous form, on intercellular adhesion of Swiss 3T3 mouse fibroblasts. Cells were grown as spheroidal cell cultures. Some control cell spheroids were cultured without chitosan and two experimental groups were cultured with chitosan. Chitosan in solution was used for one experimental group and chitosan in membranous form was used for the other. For each group, intercellular adhesion was investigated on days 5 and 10 of culture. Transmission electron microscopy revealed well-defined cellular projections that were more prominent in cells exposed to either membranous or solution forms of chitosan than to the chitosan-free control. Immunocytochemical staining of ICAM-1 and e-cadherin was used to determine the development of intercellular junctions. Compared to the weakly stained control, strong reactions were observed in both chitosan exposed groups at both 5 and 10 days. Cells were treated with 5-bromo-2-deoxyuridine (BrdU) and incubated with anti-BrdU primary antibody to assess proliferation. Both the solution and membranous forms of chitosan increased proliferation at both 5 and 10 days. Cellular viability was assessed using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT). The MTT assay indicated high cell viability; maximum viability was obtained with the solution form of chitosan at day 5. Chitosan exposure increased the number of intercellular junctions and showed a significant proliferative effect on 3T3 mouse fibroblasts.     

In vitro evaluation of an RGD-functionalized chitosan derivative for enhanced cell adhesion

Tissue repair is a spontaneous process that is initiated on wounding. However, if this complex mechanism is impaired or not sufficient the use of biomaterials might increase the chance of successful healing. In this view, an RGD-functionalized polymer was developed to promote dermal healing. A water-soluble chitosan derivative, carboxymethyl-trimethylchitosan (CM-TM-chitosan) was synthesized and GRGDS-moieties were grafted to the backbone at a concentration of 59nmol/mg polymer to increase cell-biomaterial interaction. Tested in vitro with cultured human dermal fibroblasts, the developed polymer showed good biocompatibility and the initial adhesion was increased by 3-5 times due to the GRGDS-moieties. Moreover, cell spreading was specific to the interaction with GRGDS, giving a 12-fold increase of cells showing a fully spread morphology within 30min. Overall, CM-TM-chitosan conjugated with GRGDS-peptides may prove useful as a biomaterial in wound healing.     

壳聚糖基角膜细胞载体的制备及其细胞相容性

为探讨羟丙基壳聚糖基共混膜作为组织工程技术中角膜细胞培养载体的可行性, 分别制备了羟丙基壳聚糖/硫酸软骨素、羟丙基壳聚糖/明胶/硫酸软骨素以及羟丙基壳聚糖/氧化透明质酸/硫酸软骨素三种共混膜。测定其透光率、含水量和蛋白吸附性能; 在共混膜上培养兔角膜上皮细胞, 通过观察角膜上皮细胞在不同载体膜上的生长状态、贴附情况, 测定细胞活性以及上清液中乳酸脱氢酶的活性, 研究三种壳聚糖基载体膜片与角膜上皮细胞的相容性。膜片理化性质测定结果表明三种共混膜片具有良好的透明度, 适宜的含水量和较强的蛋白吸附性能; 细胞相容性实验结果表明羟丙基壳聚糖/明胶/硫酸软骨素共混膜对细胞的损伤最小, 有利于细胞在膜上的贴附和生长, 表现出良好的细胞相容性, 有望作为角膜细胞载体体外构建组织工程化角膜。