Kinetic characterization of the substrate reaction between a complex of antithrombin with a synthetic reactive-bond loop tetradecapeptide and four target proteinases of the inhibitor.

A tetradecapeptide corresponding to the P1 to P14 region of the reactive-bond loop of antithrombin (AT) binds to the inhibitor, presumably as a middle strand of the A beta-sheet, thereby converting AT from an inhibitor to a substrate of thrombin (Bj?rk, I., Ylinenj?rvi, K., Olson, S.T., and Bock, P. E. (1992) J. Biol. Chem. 267, 1976-1982). The kinetics of cleavage of the AT reactive bond in the AT-peptide complex by four target proteinases were quantified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and densitometry. The kcat/Km values for thrombin and factor IXa were indistinguishable from the second-order rate constants for AT inhibition of these enzymes, whereas the values for factor Xa and plasmin were 10-17-fold higher than the inhibition rate constants. Heparin with high affinity for AT accelerated the substrate reaction with thrombin to an extent consistent with the reduced heparin affinity of the AT-peptide complex. These data show that blocking by the peptide of the putative intramolecular association of the P1 to P14 region of the AT reactive-bond loop with the A beta-sheet leads to AT functioning as a substrate of its target enzymes with an efficiency that equals or exceeds the action of uncomplexed AT as an inhibitor and with the expected heparin activation. The results thus suggest that a substrate-like attack of the proteinase on the inhibitor reactive bond in an exposed loop initiates the inhibition reaction. This attack presumably induces the subsequent trapping of the enzyme by the insertion of the reactive-bond loop into the A beta-sheet.     

Modeling the intact form of the alpha 1-proteinase inhibitor

The structure of the intact form of the serpin alpha 1-proteinase inhibitor has been modeled based on the assumption that the central strand s4A of the six-stranded beta-sheet A of the cleaved inhibitor is not incorporated into the sheet of intact alpha 1-proteinase inhibitor. This strand was removed from its position in the center of the sheet by suitable rotations about the backbone dihedrals of Lys343 using molecular graphics. The resulting structure was then annealed using molecular dynamics (MD) while applying progressive distance restraints to the reactive peptide bond (Met358-Ser359) for 50 ps. During this time, the disrupted beta-sheet reformed to create a five-stranded beta-sheet with strands 3 and 5 in a parallel arrangement. This change and accompanying structural rearrangements are largely confirmed by the X-ray structure of plakalbumin, whose structure reflects the overall structure of intact serpins. The successful modeling experiment demonstrates the utility of MD for making gross structural predictions based on related structures. The binding loop of the intact form is modeled to allow docking with serine proteinases, in particular thrombin, which most highly constrains the possible conformations of the binding loop.     

Reactive site mutants of recombinant protein C inhibitor

Protein C inhibitor (PCI) is a heparin-binding serine proteinase inhibitor (serpin) which is thought to be a physiological regulator of activated protein C (APC). The residues F353-R354-S355 (P2-P1-P1′) constitute part of the reactive site loop of PCI with the R-S peptide bond being cleaved by the proteinase. Changing the reactive site P1 and P2 residues to those of either proteinase nexin-1, α₁-proteinase inhibitor or heparin cofactor II resulted in a decrease in inhibitory activity towards thrombin and APC. Changing the P2 residue F353 → P generated a rPCI which was a better thrombin inhibitor, but was 10-fold less active with APC. While these results support the concept that the P1 and P2 residues are important in the specificity of PCI, they suggest that the reactive site residues are not the only determinant of serpin specificity. Kinetic analysis of the rPCI variants was consistent with PCI operating by a mechanism similar to that proposed for other serpins. In this model an intermediary complex forms between inhibitor and proteinase that can proceed to either cleavage of the inhibitor as substrate or formation of an inactive complex.     

Full or partial substitution of the reactive center loop of alpha-1-proteinase inhibitor by that of heparin cofactor II: P1 Arg is required for maximal thrombin inhibition

The abundant plasma protein alpha(1)-proteinase inhibitor (alpha(1)-PI) physiologically inhibits neutrophil elastase (NE) and factor XIa and belongs to the serine protease inhibitor (serpin) protein superfamily. Inhibitory serpins possess a surface peptide domain called the reactive center loop (RCL), which contains the P1-P1' scissile peptide bond. Conversion of this bond in alpha(1)-PI from Met-Ser to Arg-Ser in alpha(1)-PI Pittsburgh (M358R) redirects alpha(1)-PI from inhibiting NE to inhibiting thrombin (IIa), activated protein C (APC), and other proteases. In contrast to either the wild-type or M358R alpha(1)-PI, heparin cofactor II (HCII) is a IIa-specific inhibitor with an atypical Leu-Ser reactive center. We examined the effects of replacement of all or part of the RCL of alpha(1)-PI with the corresponding parts of the HCII RCL on the activity and specificity of the resulting chimeric inhibitors. A series of 12 N-terminally His-tagged alpha(1)-PI proteins differing only in their RCL residues were expressed as soluble proteins in Escherichia coli. Substitution of the P16-P3' loop of alpha(1)-PI with that of HCII increased the low intrinsic antithrombin activity of alpha(1)-PI to near that of heparin-free HCII, while analogous substitution of the P2'-P3' dipeptide surpassed this level. However, gel-based complexing and quantitative kinetic assays showed that all mutant proteins inhibited thrombin at less than 2% of the rate of alpha(1)-PI (M358R) unless the P1 residue was also mutated to Arg. An alpha(1)-PI (P16-P3' HCII/M358R) variant was only 3-fold less active than M358R against IIa but 70-fold less active against APC. The reduction in anti-APC activity is desired in an antithrombotic agent, but the improvement in inhibitory profile came at the cost of a 3.5-fold increase in the stoichiometry of inhibition. Our results suggest that, while P1 Arg is essential for maximal antithrombin activity in engineered alpha(1)-PI proteins, substitution of the corresponding HCII residues can enhance thrombin specificity.     

Amino acid sequence at the reactive site of human alpha 1-antichymotrypsin

The reactive site of human alpha 1-antichymotrypsin has been identified as encompassing a leucyl-seryl bond at the apparent P1 and P'1 positions. This has been determined by dissociation of complexes of the inhibitor with bovine alpha-chymotrypsin, followed by identification of new NH2-terminal sequences, as well as by proteolytic inactivation by porcine pancreatic elastase. The latter results in peptide bond cleavage between the apparent P5 and P4 positions of the inhibitor, yielding a fragment whose sequence overlaps with that obtained through complex dissociation. Some homology with the sequence obtained and that already reported for both antithrombin III and alpha 1-proteinase inhibitor can be noted.     

Canonical inhibitor-like interactions explain reactivity of alpha1-proteinase inhibitor Pittsburgh and antithrombin with proteinases

The serpin antithrombin is a slow thrombin inhibitor that requires heparin to enhance its reaction rate. In contrast, alpha1-proteinase inhibitor (alpha1PI) Pittsburgh (P1 Met --> Arg natural variant) inhibits thrombin 17 times faster than pentasaccharide heparin-activated antithrombin. We present here x-ray structures of free and S195A trypsin-bound alpha1PI Pittsburgh, which show that the reactive center loop (RCL) possesses a canonical conformation in the free serpin that does not change upon binding to S195A trypsin and that contacts the proteinase only between P2 and P2'. By inference from the structure of heparin cofactor II bound to S195A thrombin, this RCL conformation is also appropriate for binding to thrombin. Reaction rates of trypsin and thrombin with alpha1PI Pittsburgh and antithrombin and their P2 variants show that the low antithrombin-thrombin reaction rate results from the antithrombin RCL sequence at P2 and implies that, in solution, the antithrombin RCL must be in a similar canonical conformation to that found here for alpha1PI Pittsburgh, even in the nonheparin-activated state. This suggests a general, limited, canonical-like interaction between serpins and proteinases in their Michaelis complexes.     

Human alpha 1-proteinase inhibitor. Crystal structure analysis of two crystal modifications, molecular model and preliminary analysis of the implications for function

Two closely related crystal structures of alpha 1-proteinase inhibitor modified at the reactive site peptide bond Met358--Ser359 have been analysed. The crystal structure has been obtained from diffraction data at 3 A resolution, with phases originally from isomorphous replacement. The electron density map was substantially improved by cyclic averaging of the electron densities of the two crystal forms and allowed the chain to be traced in terms of the known chemical amino acid sequence. Energy restrained crystallographic refinement was initiated and resulted in conventional R-values of 0.251 for the tetragonal crystal form (6 to 3 A resolution) and 0.247 for the hexagonal crystal form (6 to 3.2 A resolution). The polypeptide chain is almost completely arranged in well-defined secondary structural elements: three beta-sheets and eight alpha-helices. The helices are preferentially formed by the first 150 residues. They are in proximity underneath sheet A. The chain ends Met358 and Ser359 of the nicked species are arranged in strands on opposite ends of the molecule indicating a major structural rearrangement upon modification of the intact inhibitor. It is suggested that the Met358 strand is in a different conformation removed from sheet A and approaches Ser359 in the intact inhibitor species. Glu342, which is exchanged by a lysine in the Z-variant is in a strategic position for such a rearrangement. The three carbohydrate chains of alpha 1-proteinase inhibitor have partly defined electron density close to their attachment sites at asparagine residues. The anti-thrombin and ovalbumin amino acid sequences can be accommodated in the alpha 1 inhibitor molecular structure. The intron-exon junctions of the ovalbumin and the alpha 1-proteinase inhibitor gene are all in surface loops of the mature protein.     

Structural transition of alpha 1-antitrypsin by a peptide sequentially similar to beta-strand s4A

Crystal structure studies have shown that cleaved and intact serpins differ essentially in the topology of beta-sheet A. This is five-stranded in the intact molecules and six-stranded after cleavage by insertion of strand s4A whose C-terminus has become free [L?bermann, H., Tokuoka, R., Deisenhofer, J. & Huber, R. (1984) J. Mol. Biol. 177, 531-556; Wright, T. H., Qian, H. X. & Huber, R. (1990) J. Mol. Biol. 213, 513-528]. The structural transition is accompanied by changes in spectral properties and an increase in thermal stability. We show here that an N alpha-acetyl-tetradecapeptide with the amino acid sequence of strand s4A, residues 345-358 of human alpha 1-antitrypsin, associates with intact alpha 1-antitrypsin and forms a stoichiometric complex with properties very similar to cleaved alpha 1-antitrypsin. Complex generation has the characteristics of a folding process.     

Crystal structure of plakalbumin, a proteolytically nicked form of ovalbumin. Its relationship to the structure of cleaved alpha-1-proteinase inhibitor

The crystal structure of plakalbumin, a proteolytically nicked form of ovalbumin, has been determined to a resolution of 2.8 A by the isomorphous replacement method and preliminary refinement. The structure closely resembles that of the cleaved form of alpha-1-proteinase inhibitor, with some important exceptions. The disposition of the new carboxyl chain terminus liberated by proteolysis is different with respect to the central beta-sheet A in the structures of these two molecules. In alpha-1-proteinase inhibitor, the new chain terminus inserts in beta-sheet A to add a middle strand to the sheet. In plakalbumin, this strand remains free near the site at which the cleavage occurs. A structural basis for this difference in behavior is proposed from the structures and sequences of these two molecules and other members of the serpin family. The structures and positions of the putative signal peptide of ovalbumin, the several post-translational modifications, and the relationship of the intron-exon patterns of plakalbumin and alpha-1-proteinase inhibitor to their protein structures are also described.     

In vivo catabolism of heparin cofactor II and its complex with thrombin: evidence for a common receptor-mediated clearance pathway for three serine proteinase inhibitors

The plasma clearance of 125I-labeled human heparin cofactor II and its complex with thrombin was studied in mice to determine whether a specific mechanism exists for the catabolism of the inhibitor-proteinase complex. Initial studies demonstrated that murine plasma contains a heparin cofactor II-like inhibitor as shown by the presence of a dermatan sulfate-sensitive thrombin inhibitor. Human heparin cofactor II cleared from the circulation of mice with an apparent half-life of 80 min while heparin cofactor II-thrombin complexes cleared with an apparent half-life of only 10 min. The specificity of the clearance mechanism was investigated by clearance competition studies involving coinjection of excess unlabeled heparin cofactor II-alpha-thrombin, antithrombin III-alpha-thrombin, or alpha 1-proteinase inhibitor-elastase, and by tissue distribution studies. The results demonstrated that the clearance of 125I-labeled heparin cofactor II-alpha-thrombin is a receptor-mediated process, and that the same hepatocyte receptor system recognizes complexes containing heparin cofactor II, antithrombin III, and alpha 1-proteinase inhibitor.     

Activated protein C-protein C inhibitor complex formation: characterization of a neoepitope provides evidence for extensive insertion of the reactive center loop

Protein C inhibitor, a serine proteinase inhibitor (serpin), is the physiologically most important inhibitor of activated protein C. We have made a monoclonal antibody (M36) that binds with equally high affinity to an epitope present in activated protein C-protein C inhibitor complexes and cleaved loop-inserted protein C inhibitor. Insertion of a synthetic N-acetylated tetradecapeptide (corresponding to residues P1-P14 of the reactive center loop) into beta-sheet A of the uncleaved inhibitor also exposed the epitope. The antibody had no apparent affinity for native uncleaved inhibitor or for the free peptide. Synthetic P1-P14 analogues, with Arg P13 or Ala P9 substituted to the residues found in mouse protein C inhibitor (Thr and Ile, respectively), were also inserted in beta-sheet A. The Arg P13/Thr substitution led to a greatly impaired reactivity with the antibody, whereas the Ala P9/Ile mutation resulted in a modest loss of reactivity with the antibody. These results indicate that complex formation leads to insertion of the reactive center loop in beta-sheet A from Arg P14 and presumably beyond Ala P9. Moreover, to the best of our knowledge, this is the first instance where the neoepitope of a complexation-specific monoclonal antibody has been localized to the loop-inserted part of beta-sheet A, the part of the serpin where the complexation-induced conformational change is most conspicuous.     

Localization of an antithrombin exosite that promotes rapid inhibition of factors Xa and IXa dependent on heparin activation of the serpin

We have previously shown that exosites in antithrombin outside the P6-P3' reactive loop region become available upon heparin activation to promote rapid inhibition of the target proteases, factor Xa and factor IXa. To identify these exosites, we prepared six antithrombin-alpha 1-proteinase inhibitor chimeras in which antithrombin residues 224-286 and 310-322 that circumscribe a region surrounding the reactive loop on the inhibitor surface were replaced in 10-16-residue segments with the homologous segments of alpha1-proteinase inhibitor. All chimeras bound heparin with a high affinity similar to wild-type, underwent heparin-induced fluorescence changes indicative of normal conformational activation, and were able to form SDS-stable complexes with thrombin, factor Xa, and factor IXa and inhibit these proteases with stoichiometries minimally altered from those of wild-type antithrombin. With only one exception, conformational activation of the chimeras with a heparin pentasaccharide resulted in normal approximately 100-300-fold enhancements in reactivity with factor Xa and factor IXa. The exception was the chimera in which residues 246-258 were replaced, corresponding to strand 3 of beta-sheet C, which showed little or no enhancement of its reactivity with these proteases following pentasaccharide activation. By contrast, all chimeras including the strand 3C chimera showed essentially wild-type reactivities with thrombin after pentasaccharide activation as well as normal full-length heparin enhancements in reactivity with all proteases due to heparin bridging. These findings suggest that antithrombin exosites responsible for enhancing the rates of factor Xa and factor IXa inhibition in the conformationally activated inhibitor lie in strand 3 of beta-sheet C of the serpin.     

Importance of the P2 glycine of antithrombin in target proteinase specificity, heparin activation, and the efficiency of proteinase trapping as revealed by a P2 Gly --> Pro mutation.

A sequence-specific heparin pentasaccharide activates the serpin, antithrombin, to inhibit factor Xa through an allosteric mechanism, whereas full-length heparin chains containing this sequence further activate the serpin to inhibit thrombin by an alternative bridging mechanism. To test whether the factor Xa specificity of allosterically activated antithrombin is encoded in the serpin reactive center loop, we mutated the factor Xa-preferred P2 Gly to the thrombin-preferred P2 Pro. Kinetic studies revealed that the mutation maximally enhanced the reactivity of antithrombin with thrombin 15-fold and decreased its reactivity toward factor Xa 2-fold when the serpin was activated by heparin pentasaccharide, thereby transforming antithrombin into an allosterically activated inhibitor of both factor Xa and thrombin. Surprisingly, the enhanced thrombin specificity of the mutant antithrombin was attenuated when a full-length bridging heparin was the activator, due both to a reduced rate of covalent reaction of the mutant serpin and thrombin and preferred reaction of the mutant serpin as a substrate. These results demonstrate that the reactive center loop sequence determines the specificity of allosterically activated antithrombin for factor Xa and that the conformational flexibility of the P2 Gly may be critical for optimal bridging of antithrombin and thrombin by physiologic heparin and for preventing antithrombin from reacting as a substrate in the bridging complex.     

Serine 380 (P14) --> glutamate mutation activates antithrombin as an inhibitor of factor Xa

Heparin regulates the inhibitory activity of antithrombin. It has been proposed that residues P15 and P14 are expelled from beta-sheet A of antithrombin by heparin binding, permitting better interaction of the reactive center loop with factor Xa. We have made a P14 antithrombin variant (S380E) to create an activated inhibitory form of antithrombin in which P14 is already expelled from beta-sheet A. S380E antithrombin fluorescence is enhanced 35 +/- 5% compared with control antithrombin. There is minimal further increase in antithrombin fluorescence upon heparin binding. The variant has a 5 degrees C lower T(m) than control antithrombin. The variant is an inhibitor of proteinases and has a nearly 200-fold increased basal rate of inhibition of factor Xa, after correction for an increased stoichiometry of inhibition. This is comparable to that of antithrombin activated by high affinity heparin pentasaccharide. Full-length high affinity heparin causes only a 7-fold additional increase in rate and a large increase in stoichiometry of inhibition. In contrast, the basal rate of inhibition of thrombin is similar to that of control antithrombin but is increased 300-fold by heparin. These findings suggest that the native state of the S380E variant exists in a loop-expelled conformation that is consequently highly reactive toward factor Xa.     

Insights into the serine protease mechanism based on structural observations of the conversion of a peptidyl serine protease inhibitor to a substrate

BackgroundSerine proteases are one of the most studied group of enzymes. Despite the extensive mechanistic studies, some crucial details remain controversial, for example, how the cleaved product is released in the catalysis reaction. A cyclic peptidyl inhibitor (CSWRGLENHRMC, upain-1) of a serine protease, urokinase-type plasminogen activator (uPA), was found to become a slow substrate and cleaved slowly upon the replacement of single residue (W3A).MethodsBy taking advantage of the unique property of this peptide, we report the high-resolution structures of uPA in complex with upain-1-W3A peptide at four different pH values by X-ray crystallography.ResultsIn the structures obtained at low pH (pH 4.6 and 5.5), the cyclic peptide upain-1-W3A was found to be intact and remained in the active site of uPA. At 7.4, the scissile bond of the peptide was found cleaved, showing that the peptide became a uPA substrate. At pH 9.0, the C-terminal part of the substrate was no longer visible, and only the P1 residue occupying the S1 pocket was identified.ConclusionsThe analysis of these structures provides explanations why the upain-1-W3A is a slow substrate. In addition, we clearly identified the cleaved fragments of the peptide at both sides of the scissile bond in the active site of the enzyme, showing a slow release of the cleaved peptide.General significanceThis work indicates that the quick release of the cleaved P′ fragment after the first step of hydrolysis may not always be needed for the second hydrolysis.     

The ternary complex of antithrombin-anhydrothrombin-heparin reveals the basis of inhibitor specificity

Antithrombin, the principal physiological inhibitor of the blood coagulation proteinase thrombin, requires heparin as a cofactor. We report the crystal structure of the rate-determining encounter complex formed between antithrombin, anhydrothrombin and an optimal synthetic 16-mer oligosaccharide. The antithrombin reactive center loop projects from the serpin body and adopts a canonical conformation that makes extensive backbone and side chain contacts from P5 to P6' with thrombin's restrictive specificity pockets, including residues in the 60-loop. These contacts rationalize many earlier mutagenesis studies on thrombin specificity. The 16-mer oligosaccharide is just long enough to form the predicted bridge between the high-affinity pentasaccharide-binding site on antithrombin and the highly basic exosite 2 on thrombin, validating the design strategy for this synthetic heparin. The protein-protein and protein-oligosaccharide interactions together explain the basis for heparin activation of antithrombin as a thrombin inhibitor.     

The inactivation of human plasma alpha 1-proteinase inhibitor by proteinases from Staphylococcus aureus

The interaction of three proteinases (seryl, cysteinyl, and metallo-) from Staphylococcus aureus with human plasma alpha 1-proteinase inhibitor has been investigated. As expected, none of the enzymes was inactivated by this protein, each, instead causing the conversion of the native inhibitor into an inactive form of decreased molecular weight. Amino-terminal sequence analysis indicated that inhibitor inactivation had occurred by peptide bond cleavage near the reactive center of this protein. When the inhibitor was modified by this treatment, it became resistant to both pH and temperature denaturation and, in contrast to the intact denatured protein, did not undergo further proteolytic degradation. This process of inactivation of alpha 1-proteinase inhibitor by pathogenic proteinases could result in a deregulation of its target enzyme, neutrophil elastase, and, therefore, may be important in the consumption of some plasma proteins by this enzyme during septicemia.     

Evidence for the extent of insertion of the active site loop of intact alpha 1 proteinase inhibitor in beta-sheet A.

The extent of insertion of beta-strand s4A into sheet A in intact serpin alpha 1-proteinase inhibitor (alpha 1PI has been probed by peptide annealing experiments [Schulze et al. (1990) Eur. J. Biochem. 194, 51-56]. Twelve synthetic peptides of systematically varied length corresponding in sequence to the unprimed (N-terminal) side of the active site loop were complexed with alpha 1PI. The complexes were then characterized by circular dichroism spectroscopy and tested for inhibitory activity. Four peptides formed complexes which retained inhibitory activity, one of which was nearly as effective as the native protein. Comparison with the three dimensional structures of cleaved alpha 1PI [L?bermann et al. (1984) J. Mol. Biol. 177, 531-556] and plakalbumin [Wright et al. (1990) J. Mol. Biol. 213, 513-528] supports a model in which alpha 1PI requires the insertion of a single residue, Thr345, into sheet A for activity.     

Reactive site peptide structural similarity between heparin cofactor II and antithrombin III

Heparin cofactor II (Mr = 65,600) was purified 1800-fold from human plasma to further characterize the structural and functional properties of the protein as they compare to antithrombin III (Mr = 56,600). Heparin cofactor II and antithrombin III are functionally similar in that both proteins have been shown to inhibit thrombin at accelerated rates in the presence of heparin. There was little evidence for structural homology between heparin cofactor II and antithrombin III when high performance liquid chromatography-tryptic peptide maps and NH2-terminal sequences were compared. A partially degraded form of heparin cofactor II was also obtained in which a significant portion (Mr = 8,000) of the NH2 terminus was missing. The rates of thrombin inhibition (+/- heparin) by native and partially degraded-heparin cofactor II were not significantly different, suggesting that the NH2-terminal region of the protein is not essential either for heparin binding or for thrombin inhibition. A significant degree of similarity was found in the COOH-terminal regions of the proteins when the primary structures of the reactive site peptides, i.e. the peptides which are COOH-terminal to the reactive site peptide bonds cleaved by thrombin, were compared. Of the 36 residues identified, 19 residues in the reactive site peptide sequence of heparin cofactor II could be aligned with residues in the reactive site peptide from antithrombin III. While the similarities in primary structure suggest that heparin cofactor II may be an additional member of the superfamily of proteins consisting of antithrombin III, alpha 1-antitrypsin, alpha 1-antichymotrypsin and ovalbumin, the differences in structure could account for differences in protease specificity and reactivity toward thrombin. In particular, a disulfide bond which links the COOH-terminal (reactive site) region of antithrombin III to the remainder of the molecule and is important for the heparin-induced conformational change in the protein and high affinity binding of heparin does not appear to exist in heparin cofactor II. This observation provides an initial indication that while the reported kinetic mechanisms of action of heparin in accelerating the heparin cofactor II/thrombin and antithrombin III/thrombin reactions are similar, the mechanisms and effects of heparin binding to the two inhibitors may be different.     

Inhibition mechanism of a peanut trypsin-chymotrypsin inhibitor, B-III: determination of the reactive sites for trypsin and chymotrypsin

Peanut inhibitor B-III was found to form two types of complexes with trypsin, T2I and TI, by gel filtration HPLC. Two cleaved peptide bonds, Arg(10)-Arg(11) and Arg(38)-Ser(39), in the trypsin modified inhibitor (TM-B-III*R*S) (J. Biochem. 93, 479-485 (1983] were resynthesized by the complex formation with 2 mol of trypsin. These results suggest that the two peptide bonds may be the reactive sites for trypsin. TM-B-III*R*S inhibited bovine trypsin as well as native B-III but had little chymotrypsin inhibitory activity. The two peptide bonds, Arg(10)-Arg(11) and Arg(38)-Ser(39), in B-III were cleaved partly by prolonged incubation with a catalytic amount of chymotrypsin. But gel filtration HPLC of the chymotrypsin-inhibitor complex showed the formation of only CI complex. Incubation of TM-B-III*R*S with an equimolar amount of chymotrypsin resulted in the resynthesis of only the Arg(10)-Arg(11) bond. These findings suggest that Arg(10)-Arg(11) may be a true reactive site for chymotrypsin. An inhibition mechanism of B-III against trypsin and chymotrypsin was proposed from the results obtained by the present studies.