Industrial biocide formulation — The way forward

Increasing legislative requirements and the necessity for greater environmental acceptability have emphasised the need for either new, or carefully selected blends of existing, biocides. Blending of existing biocides offers a means of providing broad-spectrum antimicrobial activity, the possibility of synergy and avoids the high cost of screening new molecules. This paper discusses the advantages and disadvantages of this approach and illustrates the properties of new formulations utilising mixtures of commercially available biocides. Laboratory data are presented on the performance of formulations for the preservation of cosmetics and toiletries.The performance of new formulations for use as industrial biocides in metal-working fluids and water treatment applications is discussed.     

HEARING CONSERVATION—Industrial Aspects in California

Impaired hearing is a serious problem. The number of persons with a significant hearing loss has been estimated to be approximately 10 per cent of the population.Hearing loss owing to exposure to noise is becoming an increasingly important disease. Although it has been recognized for more than a century, little if anything was done to prevent it until a few years ago.The initiation of hearing conservation for employees has been undertaken by many of the large companies, particularly in California.Hearing conservation includes preemployment and follow-up hearing tests, control of noise at the source and personal protection (ear plugs, ear muffs).Noise-induced hearing loss is directly related to noise-exposure. Noise must be measured in terms of volume, wave length and length of exposure. Exposure must be analyzed for daily distribution and total time.Although the noise-exposure problem is a serious one, cooperation of employee, employer and the legal and medical professions to initiate preventive programs can reduce it to a minimum.     

Industrial melanism: Do we have the answers?

Entomologists from the late 19th century onwards recognized the evolutionary interest of the association of black forms of the peppered moth with industrialization. They developed a qualitative explanation of the phenomenon involving a change in relative crypsis of the phenotypes due to the blackening of the moth's resting background by air pollution. More recently, ecological geneticists have obtained some estimates of predation by birds and of population parameters such as migration rate. Models incorporating these estimates have explored the ways in which natural selection influences spatial variation and the maintenance of polymorphism. Studies on the peppered moth and some of the many other insects exhibiting industrial melanism have concentrated on the variability and dynamics of adult populations. Recent work which has begun to examine the ecology and behaviour of individuals, complete life cycles, and gene-phenotype relationships, is refining our understanding of this adaptation and also of present-day declines in melanic frequencies in response to falling air pollution.     

Industrial production of α-amylase by genetically engineered Bacillus

A genetically engineered Bacillus subtilis strain (ALKO 84) has been introduced for industrial production of α-amylase. This strain carries the α-amylase gene from a traditionally developed production strain B. amyloliquefaciens (ALKO 89) on the multicopy plasmid pUB110.⁸At laboratory scale the recombinant strain ALKO 84 produced in industrial medium about twice as much α-amylase as the traditional strain ALKO 89. The process for production of the enzyme was scaled-up to 60m³. At this scale B. subtilis ALKO 84 retained its relative superiority to B. amyloliquefaciens ALKO 89, producing about 85% of the activity obtained at laboratory scale. Stability of the recombinant plasmid was found acceptable during the large-scale cultivations with over 90% of cells retaining plasmid-encoded characteristics throughout.     

Industrial Applications of Solid-Phase Peptide Synthesis – A Status Report

Despite the fact that the structure of peptides has been known for more than a century, it was not until du Vigneaud published the synthesis of oxytocin 50 years later that the field was truly launched and the use of peptides as pharmaceuticals began. Since then, technical progress in the field has been astonishing, and the synthesis of peptides of virtually any size and complexity is now possible, with scale-up to the level of metric tonnes a reality. Perhaps the most important development was Merrifield’s publication of the solid-phase peptide synthesis (SPPS) method, which completely revolutionized the field, both from the perspective of accelerating research and discovery, and also because of its now widespread use for the manufacture of peptides for use as active pharmaceutical ingredients (APIs). The application of the SPPS method to the manufacture of peptide APIs will be reviewed, including both a historical overview and a summary of the current status. Some of the remaining challenges will also be discussed.     

Decolourization of Industrial Effluents – Available Methods and Emerging Technologies – A Review

Water pollution control is presently one of the major thrust areas of scientific research. While coloured organic compounds generally impart only a minor fraction of the organic load to wastewaters, their colour renders them aesthetically unacceptable. Stringent regulating measures are coaxing industries to treat their waste effluents to increasingly high standards. Colour removal, in particular, has recently become an area of major scientific interest as indicated by the multitude of related research reports. During the past two decades, several decolourization techniques have been reported, few of which have been accepted by some industries. There is a need to find alternative treatments that are effective in removing dyes and colourants from large volume of effluents, which are cost-effective, like the biological or integrated systems. This article reviews some of the widely used and most promising industrial wastewater decolourization methods. Data on decolourizing efficiencies of different causative agents, obtained by means of different physical, chemical and biological methods are discussed. Further a critical review is made on the various treatment methodologies and emerging technologies with a note on their advantages and disadvantages.     

Enhanced Production of β-Carotene by Recombinant Industrial Wine Yeast Using Grape Juice as Substrate

In this study, both recombinant Saccharomyces cerevisiae T73-63 and FY-09 derived from the industrial wine yeast T73-4 and laboratory yeast FY1679-01B, respectively, were constructed and compared for their β-carotene production in real grape juice. The results showed that highest β-carotene content (5.89 mg/g) was found in strain T73-63, which was 2.1 fold higher than that of strain FY-09. Although the cell growth was inhibited by the metabolic burden induced by the production of heterogeneous β-carotene, the pigment yield in T73-63 was still 1.7 fold higher than that of FY-09. Furthermore, high contents of ergosterol and fatty acid were also observed in T73-63. These results suggest that industrial wine yeast has highly active metabolic flux in mevalonate pathway, which leads to more carbon flux into carotenoid branch compared to that of laboratory yeast. The results of this study collectively suggest that in the application of recombinant strains to produce carotenoid using agro-industrial by-products as substrate, the suitable host strains should have active mevalonate pathway. For this purpose, the industrial wine yeast is a suitable candidate.     

Microalgal Biorefineries for Bioenergy Production: Can We Move from Concept to Industrial Reality?

Biorefineries are commercial facilities that transform raw materials into commodities of considerable interest to the world bioeconomy. In addition, biorefineries have the potential to achieve favorable environmental characteristics, such as minimal greenhouse gas (GHG) emissions and a lower water footprint, compared to homologous fossil fuels. However, for this concept to become efficient and viable, the use of potentially abundant and specific renewable biological feedstocks should be considered, such as microalgae biomass and other generated products. However, there is an emerging need to consolidate industrial plants that are not only affected by market fluctuations but also aim to transform biological materials into industrially usable products. Thus, for a microalgae biorefinery to compete with the resilient oil refineries in the future, process integration in the supply chain is a promising engineering approach, associating all the components from the cultivation to obtain multiple products that are economically and environmentally sustainable. Therefore, the objective of this review is to compile issues related to microalgal biorefineries applied to bioenergy and biofuel production.     

FAULTY HEALING IN THE LOWER EXTREMITIES—Vascular Deficiency as a Complication in Industrial Injuries

The failure of injuries of the lower extremities to heal properly can often be traced in older persons to arteriosclerosis obliterans. In industry this condition presents a serious problem to older workers, to employers and to insurance carriers.In persons with severe varicosis or those who have had extensive thrombophlebitis, ulcers of the leg may develop following bruising of the skin in the region of the ankle.A third and little recognized condition is edema with or without induration of the skin and subcutaneous structures of the leg, with or without the existence of varicose veins and without evidence of cardiac or renal disorders. This condition is often associated with the absence of or marked diminution of the production of hydrochloric acid by the stomach. An accompanying diminution in or absence of pepsin may occur. It is corrected slowly by taking with each meal small amounts of dilute hydrochloric acid. When pepsin is deficient, the enzyme papain is given.     

Ecophysiological Response of Plants to Combined Pollution from Heavy-duty Vehicles and Industrial Emissions in Higher Humidity

Pollution can be aggravated in industrial areas if traffic exhausts are mixed with industrial emissions under high humidity conditions. Plants growing in such environments may suffer from severe stress. The impact of vehicle emissions on urban vegetation in an industrial area in Qingdao, China, was investigated by studying seven plant species at visible, physiological and chemical levels. The traits of plant species in certain environmental conditions were compared between a clear area, Badaguan (BDG), and polluted area, Roadside (RS). We found that foliar sulfur uptake for all species was not significantly high at RS compared with BDG, although the sulfur content of atmosphere and surface soils at RS were much higher than those at BDG. For Ailanthus altissima Swingle, the content of foliar pigment and net photosynthesis rate (PN) decreased by 20%. Meanwhile, leaves became incrassate and no visible leaf damage was noted, suggesting this species could adapt well to pollution. A 50% decrease in PN occurred in Hibiscus syriacus L., but there was no statistical change in content of chlorophyll a and b and water uptake. Also, thickened leaves may prevent the pollutant from permeation. Foliar water content was still at a low level, although a water compensation mechanism was established for Fraxinus chinensis Rosb. reflected by low water potential and high water use efficiency. More adversely, a 65% decrease in PN happened inevitably with the significant decomposition of photosynthetic pigments, which exhibited visible damage. We also noted in one evergreen species (Magnolia grandiflora L.) that water absorption driven by low water potential should be helpful to supply water loss induced by strong stomatal transpiration and maintain normal growth. Furthermore, photosynthetic pigment content did not decline statistically, but supported a stable net assimilation. Two herbaceous species, Poa annua L. and Ophiopogon japonicus Ker‐Gawl., were very tolerant to adverse stress compared to other woody species, especially in assimilation through a compensatory increase in leaf area. A more remarkable decline in PN (decrease 80%) was noted in the exotic but widespread species, Platanus orientalis L., with serious etiolation and withering being exhibited on the whole canopy. Our results suggested, special for woody species, that most native species are more tolerant to pollution and therefore should to be broadly used in a humid urban industrial environment with heavy‐duty vehicle emissions. (Managing editor: Ya‐Qin Han)     

Sequence Analysis of Leuconostoc mesenteroides Bacteriophage Φ1-A4 Isolated from an Industrial Vegetable Fermentation

Vegetable fermentations rely on the proper succession of a variety of lactic acid bacteria (LAB). Leuconostoc mesenteroides initiates fermentation. As fermentation proceeds, L. mesenteroides dies off and other LAB complete the fermentation. Phages infecting L. mesenteroides may significantly influence the die-off of L. mesenteroides. However, no L. mesenteroides phages have been previously genetically characterized. Knowledge of more phage genome sequences may provide new insights into phage genomics, phage evolution, and phage-host interactions. We have determined the complete genome sequence of L. mesenteroides phage Φ1-A4, isolated from an industrial sauerkraut fermentation. The phage possesses a linear, double-stranded DNA genome consisting of 29,508 bp with a G+C content of 36%. Fifty open reading frames (ORFs) were predicted. Putative functions were assigned to 26 ORFs (52%), including 5 ORFs of structural proteins. The phage genome was modularly organized, containing DNA replication, DNA-packaging, head and tail morphogenesis, cell lysis, and DNA regulation/modification modules. In silico analyses showed that Φ1-A4 is a unique lytic phage with a large-scale genome inversion (∼30% of the genome). The genome inversion encompassed the lysis module, part of the structural protein module, and a cos site. The endolysin gene was flanked by two holin genes. The tail morphogenesis module was interspersed with cell lysis genes and other genes with unknown functions. The predicted amino acid sequences of the phage proteins showed little similarity to other phages, but functional analyses showed that Φ1-A4 clusters with several Lactococcus phages. To our knowledge, Φ1-A4 is the first genetically characterized L. mesenteroides phage.Bacteriophages are the most abundant biological entities (estimated to be on the order of ≥10³¹) on the planet (9, 18). Phages are ubiquitous in nature and can influence the microbial ecology and genetics of bacteria. Because of their small (usually <60 kb) genomes, phages can provide an excellent model system for studying many biological processes, including DNA replication and genetic evolution. Despite this, many phages remain uncharacterized. Very little is known about phage diversity and phage-host interactions owing to the small number of sequenced phages. Furthermore, the existing phage sequence database is highly biased toward a limited spectrum of phage hosts, namely, Enterobacteriaceae, Bacillus, Staphylococcus, Pseudomonas, Vibrio cholerae, Lactococcus, Streptococcus thermophilus, and S. pyogenes. The majority of host species for sequenced phages are either pathogenic or dairy-related bacteria. Most of the newly sequenced phage genes have no assigned functions or matches in the GenBank database (7).Vegetable fermentations rely on a variety of lactic acid bacteria (LAB). The proper succession of LAB directly determines the quality and safety of the final fermentation products. Leuconostoc mesenteroides initiates most vegetable fermentations. It converts the sugars in vegetables (primarily glucose and fructose) to lactic acid, acetic acid, ethanol, CO₂, and other flavor compounds (22, 58, 59, 60, 61). Acid production lowers the pH of fermenting vegetables and inhibits the growth of many microorganisms, including pathogens. CO₂ production promotes the establishment of an anaerobic environment which favors the growth of other LAB. The metabolites produced by L. mesenteroides largely determine the flavor characteristics of the final products. As fermentation proceeds, L. mesenteroides rapidly dies off. Other LAB, including Lactobacillus plantarum, take over and complete the fermentation.It has been a widely held view that the disappearance of L. mesenteroides and the subsequent bacterial succession in sauerkraut fermentations are due to the inhibitory effect of acids that accumulate during fermentation (54, 61). Little is known about other factors that may play a role in bacterial succession. Recent studies have shown that phages are present in the vegetable fermentations (4, 47, 48, 74, 75). Because of the rapid lytic cycle of these phages, they may significantly impact starter cultures and bacterial succession in vegetable fermentations (56). Phages active against L. mesenteroides have been isolated and characterized (48); however, genome sequences have not been reported.L. mesenteroides phage 1-A4 (designated Φ1-A4) is of particular interest. Φ1-A4 is a lytic phage that was repeatedly isolated during the initial stages of a commercial sauerkraut fermentation. As a result, Φ1-A4 may significantly influence the survival of L. mesenteroides and flavor development during sauerkraut fermentation. It was found that Φ1-A4 infects at least three different strains of L. mesenteroides (48), and therefore it may also promote genetic exchange and genetic diversity in microbial communities (34).The objectives of this study were to determine and analyze the complete genome sequence of Φ1-A4, to experimentally identify the structural protein genes, and to compare the genome organization with that of related phages. To our knowledge, this study represents the first complete genomic and molecular characterization of Leuconostoc phage. The results from this study may provide new insights into our understanding of phage genetics. This study may aid the development of phage control technologies in vegetable and other fermentations that are susceptible to phage attack.     

Adsorption of Heavy Metals by Paenibacillus validus Strain MP5 Isolated from Industrial Effluent–Polluted Soil

The present investigation was carried out to isolate bacterial strains from soil/mud samples of metal-polluted environment to check whether the natural adaptation of microbes has equipped them for bioremediation of toxic heavy metals. The primary and secondary screening resulted in 50 mesophilic autotrophic isolates of microbial consortium adapted for metal tolerance and bioadsorption potentiality. The multimetal tolerance in bacterial strain was developed by sequential transfer to higher concentrations of Cd, Cr, Cu, Pb, Ni, and Zn. The isolates were checked for their biosolubilization potential with copper-containing metal sulfide ores, viz. chalcopyrite exhibited 64% and covellite 54% solubilization in the presence of 10^?3 M multiple heavy metals on the fifth day at 35°C and pH 6.0. Metal adsorption of highly potential isolate, i.e., Paenibacillus validus MP5, studied by inductively coupled plasma optical emission spectroscopy (ICP-OES), showed maximum adsorption of Zn 27%, followed by Ni and Cd 16%, Cr 15%, Co 9%, and Pb 7.5% in chalcopyrite, which suggested its possible role in decontamination of metal-polluted sites.     

Effect of Different Carbon Sources on Decolourisation of an Industrial Textile Dye Under Alkaline–Saline Conditions

White-rot fungal strains of Trametes versicolor and Phanerochaete chrysosporium were selected to study the decolourisation of the textile dye, Reactive Black 5, under alkaline–saline conditions. Free and immobilised T. versicolor cells showed 100 % decolourisation in the growth medium supplemented with 15 g l^?1 NaCl, pH 9.5 at 30 °C in liquid batch culture. Continuous culture experiments were performed in a fixed-bed reactor using free and immobilised T. versicolor cells and allowed 85–100 % dye decolourisation. The immobilisation conditions for the biomass and the additional supply of carbon sources improved the decolourisation performance during a long-term trial of 40 days. Lignin peroxidase, laccase and glyoxal oxidase activities were detected during the experiments. The laccase activity varied depending on carbon source utilized and glycerol-enhanced laccase activity compared to sucrose during extended growth.     

Maltotriose Utilization by Industrial Saccharomyces Strains: Characterization of a New Member of the α-Glucoside Transporter Family

Maltotriose utilization by Saccharomyces cerevisiae and closely related yeasts is important to industrial processes based on starch hydrolysates, where the trisaccharide is present in significant concentrations and often is not completely consumed. We undertook an integrated study to better understand maltotriose metabolism in a mixture with glucose and maltose. Physiological data obtained for a particularly fast-growing distiller's strain (PYCC 5297) showed that, in contrast to what has been previously reported for other strains, maltotriose is essentially fermented. The respiratory quotient was, however, considerably higher for maltotriose (0.36) than for maltose (0.16) or glucose (0.11). To assess the role of transport in the sequential utilization of maltose and maltotriose, we investigated the presence of genes involved in maltotriose uptake in the type strain of Saccharomyces carlsbergensis (PYCC 4457). To this end, a previously constructed genomic library was used to identify maltotriose transporter genes by functional complementation of a strain devoid of known maltose transporters. One gene, clearly belonging to the MAL transporter family, was repeatedly isolated from the library. Sequence comparison showed that the novel gene (designated MTY1) shares 90% and 54% identity with MAL31 and AGT1, respectively. However, expression of Mty1p restores growth of the S. cerevisiae receptor strain on both maltose and maltotriose, whereas the closely related Mal31p supports growth on maltose only and Agt1p supports growth on a wider range of substrates, including maltose and maltotriose. Interestingly, Mty1p displays higher affinity for maltotriose than for maltose, a new feature among all the α-glucoside transporters described so far.     

Industrial attributes of β-glucanase produced by Bacillus sp. CSB55 and its potential application as bio-industrial catalyst

Bioprocess and Biosystems Engineering - The β-glucanase produced from Bacillus sp. CSB55 not only depicts the potent industrial characteristics but also relates as bio-industrial catalyst...     

Effect of Animal and Industrial Trans Fatty Acids on HDL and LDL Cholesterol Levels in Humans – A Quantitative Review

Background

Trans fatty acids are produced either by industrial hydrogenation or by biohydrogenation in the rumens of cows and sheep. Industrial trans fatty acids lower HDL cholesterol, raise LDL cholesterol, and increase the risk of coronary heart disease. The effects of conjugated linoleic acid and trans fatty acids from ruminant animals are less clear. We reviewed the literature, estimated the effects trans fatty acids from ruminant sources and of conjugated trans linoleic acid (CLA) on blood lipoproteins, and compared these with industrial trans fatty acids.

Methodology/Principal Findings

We searched Medline and scanned reference lists for intervention trials that reported effects of industrial trans fatty acids, ruminant trans fatty acids or conjugated linoleic acid on LDL and HDL cholesterol in humans. The 39 studies that met our criteria provided results of 29 treatments with industrial trans fatty acids, 6 with ruminant trans fatty acids and 17 with CLA. Control treatments differed between studies; to enable comparison between studies we recalculated for each study what the effect of trans fatty acids on lipoprotein would be if they isocalorically replaced cis mono unsaturated fatty acids. In linear regression analysis the plasma LDL to HDL cholesterol ratio increased by 0.055 (95%CI 0.044–0.066) for each % of dietary energy from industrial trans fatty acids replacing cis monounsaturated fatty acids The increase in the LDL to HDL ratio for each % of energy was 0.038 (95%CI 0.012–0.065) for ruminant trans fatty acids, and 0.043 (95% CI 0.012–0.074) for conjugated linoleic acid (p = 0.99 for difference between CLA and industrial trans fatty acids; p = 0.37 for ruminant versus industrial trans fatty acids).

Conclusions/Significance

Published data suggest that all fatty acids with a double bond in the trans configuration raise the ratio of plasma LDL to HDL cholesterol.     

Environmental Risk Assessment Studies of Heavy Metal Contamination in the Industrial Area of Kattedan,India—A Case Study

Kattedan is an industrial area near Hyderabad, Andhra Pradesh, India, contaminated with high concentrations of metals attributed to industrial sources (battery manufacturing, metal plating, textile and pharmaceuticals production and others). Twelve different locations in the Kattedan industrial area were assessed for concentrations of metals (Zn, Cr, Cu, Ni, Co, Pb, Hg, Cd, and As) in soils, waters, and vegetation. Application of sequential extraction technique for the soils revealed relatively high percentages of Zn, Cu, and Cr associated with mobile fractions, and correspondingly high concentrations of Zn, Cr, Cu, and Pb in forage grass samples and a high degree of bioavailability to humans. Human exposure assessment revealed high concentrations of Pb, Zn, and Cr in blood and urine samples from the residents of the study area showing a direct pathway and a potential for toxicological hazard due to heavy metal pollution.