DNA ligase III is recruited to DNA strand breaks by a zinc finger motif homologous to that of poly(ADP-ribose) polymerase. Identification of two functionally distinct DNA binding regions within DNA ligase III.

Mammalian DNA ligases are composed of a conserved catalytic domain flanked by unrelated sequences. At the C-terminal end of the catalytic domain, there is a 16-amino acid sequence, known as the conserved peptide, whose role in the ligation reaction is unknown. Here we show that conserved positively charged residues at the C-terminal end of this motif are required for enzyme-AMP formation. These residues probably interact with the triphosphate tail of ATP, positioning it for nucleophilic attack by the active site lysine. Amino acid residues within the sequence RFPR, which is invariant in the conserved peptide of mammalian DNA ligases, play critical roles in the subsequent nucleotidyl transfer reaction that produces the DNA-adenylate intermediate. DNA binding by the N-terminal zinc finger of DNA ligase III, which is homologous with the two zinc fingers of poly(ADP-ribose) polymerase, is not required for DNA ligase activity in vitro or in vivo. However, this zinc finger enables DNA ligase III to interact with and ligate nicked DNA at physiological salt concentrations. We suggest that in vivo the DNA ligase III zinc finger may displace poly(ADP-ribose) polymerase from DNA strand breaks, allowing repair to occur.     

Human DNA ligase III bridges two DNA ends to promote specific intermolecular DNA end joining

Mammalian DNA ligase III (LigIII) functions in both nuclear and mitochondrial DNA metabolism. In the nucleus, LigIII has functional redundancy with DNA ligase I whereas LigIII is the only mitochondrial DNA ligase and is essential for the survival of cells dependent upon oxidative respiration. The unique LigIII zinc finger (ZnF) domain is not required for catalytic activity but senses DNA strand breaks and stimulates intermolecular ligation of two DNAs by an unknown mechanism. Consistent with this activity, LigIII acts in an alternative pathway of DNA double strand break repair that buttresses canonical non-homologous end joining (NHEJ) and is manifest in NHEJ-defective cancer cells, but how LigIII acts in joining intermolecular DNA ends versus nick ligation is unclear. To investigate how LigIII efficiently joins two DNAs, we developed a real-time, fluorescence-based assay of DNA bridging suitable for high-throughput screening. On a nicked duplex DNA substrate, the results reveal binding competition between the ZnF and the oligonucleotide/oligosaccharide-binding domain, one of three domains constituting the LigIII catalytic core. In contrast, these domains collaborate and are essential for formation of a DNA-bridging intermediate by adenylated LigIII that positions a pair of blunt-ended duplex DNAs for efficient and specific intermolecular ligation.     

Role of the DNA ligase III zinc finger in polynucleotide binding and ligation.

Mammalian DNA ligase III exists as two distinct isoforms denoted alpha and beta. Both forms possess a motif that is homologous to the putative zinc finger present in poly(ADP-ribose) polymerase. Here, the role of this motif in the binding and ligation of nicked DNA and RNA substrates in vitro has been examined in both isoforms. Disruption of the putative zinc finger did not affect DNA ligase III activity on nicked DNA duplex, nor did it abolish DNA ligase III-alpha activity during DNA base excision repair in a cell-free assay. In contrast, disruption of this motif reduced 3-fold the activity of both DNA ligase III isoforms on nicked RNA present in RNA/DNA homopolymers. Furthermore, whereas disruption of the motif did not prevent binding of DNA ligase III to nicked DNA duplex, binding to nicked RNA homopolymers was reduced approximately 10-fold. These results suggest that the putative zinc finger does not stimulate DNA ligase III activity on simple nicked DNA substrates, but indicate that this motif can target the binding and activity of DNA ligase III to nicked RNA homopolymer. The implications of these results to the cellular role of the putative zinc finger are discussed.     

Mutational analysis of Chlorella virus DNA ligase: catalytic roles of domain I and motif VI.

A conserved catalytic core of the ATP-dependent DNA ligases is composed of an N-terminal domain (domain 1, containing nucleotidyl transferase motifs I, III, IIIa and IV) and a C-terminal domain (domain 2, containing motif VI) with an intervening cleft. Motif V links the two structural domains. Deletion analysis of the 298 amino acid Chlorella virus DNA ligase indicates that motif VI plays a critical role in the reaction of ligase with ATP to form ligase-adenylate, but is dispensable for the two subsequent steps in the ligation pathway; DNA-adenylate formation and strand closure. We find that formation of a phosphodiester at a pre-adenylated nick is subject to a rate limiting step that does not apply during the sealing of nicked DNA by ligase-adenylate. This step, presumably conformational, is accelerated or circumvented by deleting five amino acids of motif VI. The motif I lysine nucleophile (Lys27) is not required for strand closure by wild-type ligase, but this residue enhances the closure rate by a factor of 16 when motif VI is truncated. We find that a more extensively truncated ligase consisting of only N-terminal domain 1 and motif V is inert in ligase--adenylate formation, but competent to catalyze strand closure at a pre-adenylated nick. These results suggest that different enzymic catalysts facilitate the three steps of the DNA ligase reaction.     

A novel interaction between DNA ligase III and DNA polymerase gamma plays an essential role in mitochondrial DNA stability

The data in the present study show that DNA polymerase gamma and DNA ligase III interact in mitochondrial protein extracts from cultured HT1080 cells. An interaction was also observed between the two recombinant proteins in vitro. Expression of catalytically inert versions of DNA ligase III that bind DNA polymerase gamma was associated with reduced mitochondrial DNA copy number and integrity. In contrast, overexpression of wild-type DNA ligase III had no effect on mitochondrial DNA copy number or integrity. Experiments revealed that wild-type DNA ligase III facilitates the interaction of DNA polymerase gamma with a nicked DNA substrate in vitro, and that the zinc finger domain of DNA ligase III is required for this activity. Mitochondrial protein extracts prepared from cells overexpressing a DNA ligase III protein that lacked the zinc finger domain had reduced base excision repair activity compared with extracts from cells overexpressing the wild-type protein. These data support the interpretation that the interaction of DNA ligase III and DNA polymerase gamma is required for proper maintenance of the mammalian mitochondrial genome.     

An arginine residue instead of a conserved leucine residue in the recognition helix of the finger 3 of Zif268 stabilizes the domain structure and mediates DNA binding

The Cys(2)His(2)-type zinc finger is a common DNA binding motif that is widely used in the design of artificial zinc finger proteins. In almost all Cys(2)His(2)-type zinc fingers, position 4 of the α-helical DNA-recognition site is occupied by a Leu residue involved in formation of the minimal hydrophobic core. However, the third zinc finger domain of native Zif268 contains an Arg residue instead of the conserved Leu. Our aim in the present study was to clarify the role of this Arg in the formation of a stable domain structure and in DNA binding by substituting it with a Lys, Leu, or Hgn, which have different terminal side-chain structures. Assessed were the metal binding properties, peptide conformations, and DNA-binding abilities of the mutants. All three mutant finger 3 peptides exhibited conformations and thermal stabilities similar to the wild-type peptide. In DNA-binding assays, the Lys mutant bound to target DNA, though its affinity was lower than that of the wild-type peptide. On the other hand, the Leu and Hgn mutants had no ability to bind DNA, despite the similarity in their secondary structures to the wild-type. Our results demonstrate that, as with the Leu residue, the aliphatic carbon side chain of this Arg residue plays a key role in the formation of a stable zinc finger domain, and its terminal guanidinium group appears to be essential for DNA binding mediated through both electrostatic interaction and hydrogen bonding with DNA phosphate backbone.     

Functional dissection of the DNA interface of the nucleotidyltransferase domain of chlorella virus DNA ligase

Chlorella virus DNA ligase (ChVLig) has pluripotent biological activity and an intrinsic nick-sensing function. ChVLig consists of three structural modules that envelop nicked DNA as a C-shaped protein clamp: a nucleotidyltransferase (NTase) domain and an OB domain (these two are common to all DNA ligases) as well as a distinctive β-hairpin latch module. The NTase domain, which performs the chemical steps of ligation, binds the major groove flanking the nick and the minor groove on the 3'-OH side of the nick. Here we performed a structure-guided mutational analysis of the NTase domain, surveying the effects of 35 mutations in 19 residues on ChVLig activity in vivo and in vitro, including biochemical tests of the composite nick sealing reaction and of the three component steps of the ligation pathway (ligase adenylylation, DNA adenylylation, and phosphodiester synthesis). The results highlight (i) key contacts by Thr-84 and Lys-173 to the template DNA strand phosphates at the outer margins of the DNA ligase footprint; (ii) essential contacts of Ser-41, Arg-42, Met-83, and Phe-75 with the 3'-OH strand at the nick; (iii) Arg-176 phosphate contacts at the nick and with ATP during ligase adenylylation; (iv) the role of Phe-44 in forming the protein clamp around the nicked DNA substrate; and (v) the importance of adenine-binding residue Phe-98 in all three steps of ligation. Kinetic analysis of single-turnover nick sealing by ChVLig-AMP underscored the importance of Phe-75-mediated distortion of the nick 3'-OH nucleoside in the catalysis of DNA 5'-adenylylation (step 2) and phosphodiester synthesis (step 3). Induced fit of the nicked DNA into a distorted conformation when bound within the ligase clamp may account for the nick-sensing capacity of ChVLig.     

Protein-DNA footprinting by endcapped duplex oligodeoxyribonucleotides

Oligodeoxyribonucleotides (5'-phosphorylated) of varying lengths were capped using a polyamide linker to form thermodynamically stable, endcapped DNA duplexes containing 8-14 bp. We have employed these endcapped DNA duplexes as tools to determine the DNA footprint of T4 DNA ligase. By high-performance liquid chromatography and PAGE analysis of the ligation mixtures of the endcapped DNA duplexes, we have found that by varying the lengths and the position of the nick, we can determine the minimal DNA-binding site as well as the mode of binding (symmetrical or asymmetrical binding) by the enzyme. The results of the study revealed that a 11 bp endcapped duplex was the shortest duplex effectively ligated. Dependence of ligation efficiency on nick position demonstrates that T4 DNA ligase bound asymmetrically to its DNA substrate. The use of a set of thermodynamically stable endcapped deoxyribonucleoside duplexes as a tool to elucidate the DNA footprint provides an efficient strategy for footprinting, which avoids ambiguities associated with chemical and biochemical footprinting methods.     

Positive and negative cooperativity of modularly assembled zinc fingers

One simple and widespread method to create engineered zinc fingers targeting the desired DNA sequences is to modularly assemble multiple finger modules pre-selected to recognize each DNA triplet. However, it has become known that a sufficient DNA binding affinity is not always obtained. In order to create successful zinc finger proteins, it is important to understand the context-dependent contribution of each finger module to the DNA binding ability of the assembled zinc finger proteins. Here, we have created finger-deletion mutants of zinc finger proteins and examined the DNA bindings of these zinc fingers to clarify the contributions of each finger module. Our results indicate that not only a positive cooperativity but also a context-dependent reduction in the DNA binding activity can be induced by assembling zinc finger modules.     

Footprinting of Chlorella virus DNA ligase bound at a nick in duplex DNA.

The 298-amino acid ATP-dependent DNA ligase of Chlorella virus PBCV-1 is the smallest eukaryotic DNA ligase known. The enzyme has intrinsic specificity for binding to nicked duplex DNA. To delineate the ligase-DNA interface, we have footprinted the enzyme binding site on DNA and the DNA binding site on ligase. The size of the exonuclease III footprint of ligase bound a single nick in duplex DNA is 19-21 nucleotides. The footprint is asymmetric, extending 8-9 nucleotides on the 3'-OH side of the nick and 11-12 nucleotides on the 5'-phosphate side. The 5'-phosphate moiety is essential for the binding of Chlorella virus ligase to nicked DNA. Here we show that the 3'-OH moiety is not required for nick recognition. The Chlorella virus ligase binds to a nicked ligand containing 2',3'-dideoxy and 5'-phosphate termini, but cannot catalyze adenylation of the 5'-end. Hence, the 3'-OH is important for step 2 chemistry even though it is not itself chemically transformed during DNA-adenylate formation. A 2'-OH cannot substitute for the essential 3'-OH in adenylation at a nick or even in strand closure at a preadenylated nick. The protein side of the ligase-DNA interface was probed by limited proteolysis of ligase with trypsin and chymotrypsin in the presence and absence of nicked DNA. Protease accessible sites are clustered within a short segment from amino acids 210-225 located distal to conserved motif V. The ligase is protected from proteolysis by nicked DNA. Protease cleavage of the native enzyme prior to DNA addition results in loss of DNA binding. These results suggest a bipartite domain structure in which the interdomain segment either comprises part of the DNA binding site or undergoes a conformational change upon DNA binding. The domain structure of Chlorella virus ligase inferred from the solution experiments is consistent with the structure of T7 DNA ligase determined by x-ray crystallography.     

Preferential oxidation of zinc finger 2 in estrogen receptor DNA-binding domain prevents dimerization and, hence, DNA binding

For approximately one-third of estrogen receptor (ER)-positive breast cancer patients, extracted tumor ER is unable to bind to its cognate DNA estrogen response element (ERE), an effect that is partly reversible by the thiol-reducing agent dithiothreitol (DTT). Full-length (67 kDa) ER or its 11 kDa recombinant DNA-binding domain (ER-DBD) is also susceptible to loss of structure and function by the action of oxidants such as diamide and hydrogen peroxide; however, prior DNA binding by ER or ER-DBD protects against this oxidant induced loss of function. The ER-DBD contains two (Cys)(4)-liganded zinc finger motifs that cooperate to stabilize a rigid DNA-binding recognition helix and a flexible helix-supported dimerization loop, respectively. Comparisons between synthetic peptide analogues of each zinc finger and recombinant ER-DBD in the presence of zinc by electrophoretic mobility shift assay, circular dichroism, and mass spectrometry confirm that cooperativity between these zinc fingers is required for both ER-DBD structure (alpha-helicity) and function (dimeric DNA binding). Rapid proteolytic digestion of monomeric, non-DNA-bound ER-DBD followed by HPLC-MS analysis of the resulting peptides demonstrates that zinc inhibits thiol oxidation of the DNA-binding finger, but not the finger supporting the flexible dimerization loop, which remains sensitive to internal disulfide formation. These findings indicate that the loss of ER DNA-binding function in extracts from some primary breast tumors and in ER or ER-DBD exposed to thiol-reacting oxidants results from this asymmetric zinc finger susceptibility to disulfide formation that prevents dimerization. Although ER-DBD contains several strategically located methionine residues, they are less susceptible to oxidation than the thiol groups and, thus, afford no protection against cysteine oxidation and consequent loss of ER DNA-binding function.     

Protein–DNA footprinting by endcapped duplex oligodeoxyribonucleotides

Oligodeoxyribonucleotides (5′-phosphorylated) of varying lengths were capped using a polyamide linker to form thermodynamically stable, endcapped DNA duplexes containing 8–14 bp. We have employed these endcapped DNA duplexes as tools to determine the DNA footprint of T4 DNA ligase. By high-performance liquid chromatography and PAGE analysis of the ligation mixtures of the endcapped DNA duplexes, we have found that by varying the lengths and the position of the nick, we can determine the minimal DNA-binding site as well as the mode of binding (symmetrical or asymmetrical binding) by the enzyme. The results of the study revealed that a 11 bp endcapped duplex was the shortest duplex effectively ligated. Dependence of ligation efficiency on nick position demonstrates that T4 DNA ligase bound asymmetrically to its DNA substrate. The use of a set of thermodynamically stable endcapped deoxyribonucleoside duplexes as a tool to elucidate the DNA footprint provides an efficient strategy for footprinting, which avoids ambiguities associated with chemical and biochemical footprinting methods.