Influence of exchangeable ions on germinability of bacterial spores

Rode, L. J. (The University of Texas, Austin), and J. W. Foster. Influence of exchangeable ions on germinability of bacterial spores. J. Bacteriol. 91:1582-1588. 1966.-Native spores of Bacillus megaterium Texas, and H-spores produced by titration of native spores to pH 4 with mineral acid, did not germinate in a solution of alanine and inosine unless a strong electrolyte was present. Ca-spores prepared from either H-spores or native spores did germinate efficiently in the same solution without a strong electrolyte. Of several other bivalent cations tested, only strontium and barium could substitute for calcium in conditioning spores for subsequent germination in the absence of an electrolyte. Variable responses were obtained with different metal ion forms of 62 unidentified soil isolates and several stock species of Bacillus. Although the pattern of response was not uniform in all organisms, ions played a crucial role in the germinability of the great majority of strains tested.     

Germinability of coat-lacking spores of Bacillus megaterium

Upon treatment with acid, the germinability of both intact and coat-lacking spores of Bacillus megaterium ATCC 19213 exhibited similar features. Namely, when the spores previously germinated by alanine in the presence of phosphate buffer were converted to H-spores by treatment with nitric acid, germination proceeded at a very low speed in a same germination medium. When H-spores converted to Ca-spores by treatment with calcium acetate and subsequently germinated, germination proceeded at a speed higher than that of native spores and occurred even in the absence of buffer. These results suggest that the site of exchangeable cations concerned with germinability must not exist in the coat.     

Involvement of calcium in germination of coat-modified spores of Bacillus cereus T.

The effect of calcium on germination of coat-modified Bacillus cereus T spores was investigated. Coat-modified spores produced either by chemical extraction (SDS-DTT-treated spores) or by mutagenesis (10LD mutant spores) were unable to germinate in response to inosine. While SDS-DTT-treated spores could germinate slowly in the presence of L-alanine, 10LD mutant spores could not germinate at all. The lost or reduced germinability of coat-modified spores was restored when exogenous Ca2+ was supplemented to the germination media. The calcium requirement of coat-modified spores for germination was fairly specific. The simultaneous presence of germinant with Ca2+ was also required for germination of coat-modified spores. The optimal recovery of germinability was observed in the presence of 1.0 mM of calcium acetate. The calcium requirement itself was remarkably diminished under the condition in which L-alanine and a certain purine nucleoside analog, adenosine or inosine, coexisted. The lost or diminished germinability observed in SDS-DTT-treated spores or 10LD mutant spores may be attributed to the loss of calcium associated with the spore integuments.     

Involvement of the spore coat in germination of Bacillus cereus T spores.

Bacillus cereus T spores were prepared on fortified nutrient agar, and the spore coat and outer membrane were extracted by 0.5% sodium dodecyl sulfate-100 mM dithiothreitol in 0.1 M sodium chloride (SDS-DTT) at pH 10.5 (coat-defective spores). Coat-defective spores in L-alanine plus adenosine germinated slowly and to a lesser extent than spores not treated with SDS-DTT, as determined by decrease in absorbance and release of dipicolinic acid and Ca2+. Spores germinated in calcium dipicolinate only after treatment with SDS-DTT. Biphasic and triphasic germination kinetics were observed with normal and coat-defective spores, respectively, in an environment with temperature increasing from 20 to 65 degrees C at a rate of 1 degree C/min. Therefore, the physical and biochemical processes involved in germination are modified by coat removal. The data suggest that a portion of the germination apparatus located interior to the coat may be protected by the coat and outer membrane or that the coat and outer membrane otherwise enhance germination in L-alanine plus adenosine. When coat-defective spores were heat activated with the dialyzed (12,000-Mr cutoff) components extracted from the spores, germination of the SDS-DTT-treated spores was enhanced; thus, one or more components located in the spore coat or outer membrane with a molecular weight greater than 12,000 were essential for fast germination.     

Quantitative aspects of exchangeable calcium in spores of Bacillus megaterium

Rode, L. J. (The University of Texas, Austin), and J. W. Foster. Quantitative aspects of exchangeable calcium in spores of Bacillus megaterium. J. Bacteriol. 91:1589-1593. 1966.-More than 90% of the calcium in Ca(45)-labeled native spores was released from the cells during germination. Some 95% of the spore calcium was not exchangeable when ungerminated native spores were titrated to pH 4 with HNO(3). Ca, Mg, Na, Si, and Fe were displaced from the spores by H(+). The adsorption of Ca(45) by H-spores and its subsequent release were studied under a variety of conditions. The isolated "coat fraction" of spores adsorbed substantial amounts of Ca(45). Release of the adsorbed Ca was achieved with various reagents.     

Involvement of the spore coat in germination of Bacillus cereus T spores

Bacillus cereus T spores were prepared on fortified nutrient agar, and the spore coat and outer membrane were extracted by 0.5% sodium dodecyl sulfate-100 mM dithiothreitol in 0.1 M sodium chloride (SDS-DTT) at pH 10.5 (coat-defective spores). Coat-defective spores in L-alanine plus adenosine germinated slowly and to a lesser extent than spores not treated with SDS-DTT, as determined by decrease in absorbance and release of dipicolinic acid and Ca2+. Spores germinated in calcium dipicolinate only after treatment with SDS-DTT. Biphasic and triphasic germination kinetics were observed with normal and coat-defective spores, respectively, in an environment with temperature increasing from 20 to 65 degrees C at a rate of 1 degree C/min. Therefore, the physical and biochemical processes involved in germination are modified by coat removal. The data suggest that a portion of the germination apparatus located interior to the coat may be protected by the coat and outer membrane or that the coat and outer membrane otherwise enhance germination in L-alanine plus adenosine. When coat-defective spores were heat activated with the dialyzed (12,000-Mr cutoff) components extracted from the spores, germination of the SDS-DTT-treated spores was enhanced; thus, one or more components located in the spore coat or outer membrane with a molecular weight greater than 12,000 were essential for fast germination.     

Thermal resistance variations due to post-harvest treatments in Bacillus subtilis spores

Spores of Bacillus subtilis NCTC 10073 were produced using three different methods on solid and liquid defined media. Thermal resistance at 90C was examined in relation to the effects of cleaning procedures such as number of washings, speed and temperature of centrifugation on the spores. Ion-exchange spore forms (hydrogen and calcium) and coat-defective forms (urea-mercaptoethanol and urea-dithiothreitol-sodium dodecyl sulphate) were prepared from spores produced by the different spore production methods and compared for thermal resistance. The resistance patterns observed are discussed in terms of the spore properties of germinability. colony formation, dipicolinic acid and calcium contents.     

Bacillus subtilis builds structurally and functionally different spores in response to the temperature of growth

Bacterial spores are commonly isolated from a variety of different environments, including extreme habitats. Although it is well established that such ubiquitous distribution reflects the spore resistance properties, it is not clear whether the growing conditions affect the spore structure and function. We used Bacillus subtilis spores of similar age but produced at 25, 37, or 42°C to compare their surface structures and functional properties. Spores produced at the 25°C were more hydrophobic while those produced at 42°C contained more dipicolinic acid, and were more resistant to heat or lysozyme treatments. Electron microscopy analysis showed that while 25°C spores had a coat with a compact outer coat, not tightly attached to the inner coat, 42°C spores had a granular, not compact outer coat, reminiscent of the coat produced at 37°C by mutant spores lacking the protein CotG. Indeed, CotH and a series of CotH-dependent coat proteins including CotG were more abundantly extracted from the coat of 25 or 37°C than 42°C spores. Our data indicated that CotH is a heat-labile protein with a major regulatory role on coat formation when sporulation occurs at low temperatures, suggesting that B. subtilis builds structurally and functionally different spores in response to the external conditions.     

Resistance, germination, and permeability correlates of Bacillus megaterium spores successively divested of integument layers

A variant strain that produced spores lacking exosporium was isolated from a culture of Bacillus megaterium QM-B1551. Two additional spore morphotypes were obtained from the parent and variant strains by chemical removal of the complex of coat and outer membrane. Among the four morphotype spores, heat resistance did not correlate with total water content, wet density, refractive index, or dipicolinate or cation content, but did correlate with the volume ratio of protoplast to protoplast plus cortex. The divestment of integument layers exterior to the cortex had little influence on heat resistance. Moreover, the divestment did not change the response of either the parent or the variant spores to various germination-initiating agents, except for making the spores susceptible to germination by lysozyme. The primary permeability barrier to glucose for the intact parent and variant spores was found to be the outer membrane, whereas the barrier for the divested spores was the inner membrane.     

Isolation and partial characterization of Borrelia burgdorferi inner and outer membranes by using isopycnic centrifugation.

In order to characterize the protein composition of the outer membrane of Borrelia burgdorferi, we have isolated inner and outer membranes by using discontinuous sucrose density step gradients. Outer and inner membrane fractions isolated by this method contained less than 1 and 2%, respectively, of the total lactate dehydrogenase activity (soluble marker) in cell lysate. More importantly, the purified outer membranes contained less than 4% contamination by the C subunit of F1/F0 ATPase (inner membrane marker). Very little flagellin protein was present in the outer membrane sample. This indicated that the outer membranes were relatively free of contamination by cytoplasmic, inner membrane or flagellar components. The outer membrane fractions (rho = 1.19 g/cm3) contained 0.15 mg (dry weight) of protein per mg. Inner membrane samples (rho = 1.12 g/cm3) contained 0.60 mg (dry weight) of protein per mg. Freeze-fracture electron microscopy revealed that the outer membrane vesicles contained about 1,700 intramembranous particles per micron 2 while inner membrane densities for inner and outer membranes. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and nonequilibrium pH gel electrophoresis-SDS-PAGE analyses of inner and outer membrane samples revealed several proteins unique to the inner membrane and 20 proteins that localized specifically to the outer membrane. This analysis clearly shows that the inner and outer membranes isolated by this technique are unique structures.     

Comparison of coats and surface-dependent properties of Bacillus cereus T prepared in two sporulation environments

The surface or coat-associated properties of Bacillus cereus T spores produced from modified G medium (MGM) and fortified nutrient agar (FNA) were compared. The two populations appeared structurally similar by transmission electron microscopy. Spores prepared on FNA were more susceptible to ozone inactivation than MGM-prepared spores. When activated by heating for 15 min at 70–85°C, FNA-prepared spores were optimally activated at 85°C and did not become hydrophilic on heat activation while MGM spores were optimally activated at 70°C and became hydrophilic on activation. Susceptibility to removal of coat and outer membrane by chemical and enzymatic extraction treatments was measured by monitoring reduced ability to germinate in nutrients and acquired ability to germinate in the presence of lysozyme. Bacillus cereus T MGM-prepared spores germinated in lysozyme upon<1 h exposure to sodium dodecyl sulphate-dithiothreitol. FNA-prepared spores were lysozyme sensitive after > 2 h treatment. Thus, B. cereus T FNA spore coats and outer membranes were more resistant to these denaturing agents. Transmission electron micrographs revealed no change in appearance of extracted spores. Sporulation environment must be considered when laboratory-prepared spores are used to assess or predict the effect of control procedures on spores present in nature.     

Complement proteins C5b-9 induce transbilayer migration of membrane phospholipids.

Transbilayer migration of membrane phospholipid arising from membrane insertion of the terminal human complement proteins has been investigated. Asymmetric vesicles containing pyrene-labeled phosphatidylcholine (pyrenePC) concentrated in the inner monolayer were prepared by outer monolayer exchange between pyrenePC-containing large unilamellar vesicles and excess (unlabeled) small unilamellar vesicles, using bovine liver phosphatidylcholine-specific exchange protein. After depletion of pyrenePC from the outer monolayer, the asymmetric large unilamellar vesicles were isolated by gel filtration and exposed to the purified C5b-9 proteins at 37 degrees C. Transbilayer exchange of phospholipid between inner and outer monolayers during C5b-9 assembly was monitored by changes in pyrene excimer and monomer fluorescence. Membrane deposition of the C5b67 complex (by incubation with C5b6 + C7) caused no change in pyrenePC fluorescence. Addition of C8 to the C5b67 vesicles resulted in a dose-dependent decrease in the excimer/monomer ratio. This change was observed both in the presence and absence of complement C9. No change in fluorescence was observed for control vesicles exposed to C8 (in the absence of membrane C5b67), or upon C5b-9 addition to vesicles containing pyrenePC symmetrically distributed between inner and outer monolayers. These data suggest that a transbilayer exchange of phospholipid between inner and outer monolayers is initiated upon C8 binding to C5b67. The fluorescence data were analyzed according to a "random walk" model for excimer formation developed for the case where pyrenePC is asymmetrically distributed between lipid bilayers. Based on this analysis, we estimate that a net transbilayer migration of approximately 1% of total membrane phospholipid is initiated upon C8 binding to C5b67. The potential significance of this transbilayer exchange of membrane phospholipid to the biological activity of the terminal complement proteins is considered.     

The Clostridium botulinum GerAB germination protein is located in the inner membrane of spores

Clostridium botulinum dormant spores germinate in presence of l-alanine via a specific receptor composed of GerAA, GerAB and GerAC proteins. In Bacillus subtilis spores, GerAA and GerAC proteins were located in the inner membrane of the spore. We studied the location of the GerAB protein in C. botulinum spore fractions by Western-blot analysis, using an antipeptidic antibody. The protein GerAB was in vitro translated and used to confirm the specificity of the antibodies. GerAB was not present in a coat and spore outer membrane fraction but was present in a fraction of decoated spores containing inner membrane. These results strongly suggest that the protein GerAB is located in the inner membrane of the spore.     

Correlation of penicillin-binding protein composition with different functions of two membranes in Bacillus subtilis forespores.

The distribution of penicillin-binding proteins (PBPs) within different membranes of sporulating cells of Bacillus subtilis was examined in an effort to correlate the location of individual PBPs with their proposed involvement in either cortical or vegetative peptidoglycan synthesis. The PBP composition of forespores was determined by two methods: examination of isolated forespore membranes and assay of the in vivo accessibility of the PBPs to penicillin. In both cases, it was apparent that PBP 5*, the major PBP synthesized during sporulation, was present primarily, but not exclusively, in the forespore. The membranes from mature dormant spores were prepared by either chemically stripping the integument layers of the spores, followed by lysozyme digestion, or lysozyme digestion alone of coat-defective gerE spores. PBP 5* was detected in membranes from unstripped spores but was never found in stripped ones, which suggests that the primary location of this PBP is the outer forespore membrane. This is consistent with a role for PBP 5* exclusively in cortex synthesis. In contrast, vegetative PBPs 1 and 2A were only observed in stripped spore preparations that were greatly enriched for the inner forespore membrane, which supports the proposed requirement for these PBPs early in germination. The apparent presence of PBP 3 in both membranes of the spore reinforces the suggestion that it catalyzes a step common to both cortical and vegetative peptidoglycan synthesis.     

Fine Structure of Bacillus megaterium during Microcycle Sporogenesis

Ultrathin sections were prepared from cultures of Bacillus megaterium QM B1551 undergoing microcycle sporogenesis (initial spore to primary cell to second-stage spore without intervening cell division) on a chemically defined medium. The cytoplasmic core of the dormant spore was surrounded by plasma membrane, cell-wall primordium, cortex, outer cortical layer, and spore coats. Early in the cycle, the coat opened at the germinal groove, the cortex swelled, ribosomes and a chromatinic area associated with large mesosomes (which may later be incorporated into the expanding plasma membrane) appeared in the core, and the cell wall became defined at the site of the cell wall primordium. Poly-β-hydroxybutyrate granules began to appear in the primary cell at about 3 hr. By 7 hr, the forespore of the second-stage spore was delineated by typical double membranes. Between 7 and 12 hr, second-stage cell-wall primordium and cortex developed between the separating forespore membranes. The inner membrane became the plasma membrane of the second-stage spore, and the outer membrane eventually disintegrated within the second-stage spore cortex. A densely staining double layer (spore-coat primordium) developed external to the outer forespore membrane. The inner spore coat and the outer cortical layer of the second-stage spore developed from this primordium. The outer part of the spore coat, probably of sporangial origin, was laid down on the external surface of the inner spore coat. By 12 hr, second-stage spores were almost mature. By 20 hr, the mature endospores, with a thickened outer coat, were often still enclosed by degenerate primary cell wall and by the outer cortical layer and spore coat of the initial spore.     

Mechanism regulating nuclear calcium signaling

Although the outer nuclear membrane is continuous with the endoplasmic reticulum, it is possible to isolate nuclei both intact and free from endoplasmic reticulum contaminants. The outer and the inner nuclear membranes can be purified free from cross-contamination. Evidence in support of autonomous regulation of nuclear calcium signaling relies upon the investigations with isolated nuclei. Mechanisms for generating calcium signaling in the nucleus have been identified. Two calcium transporting systems, an ATP-dependant nuclear Ca(2+)-ATPase and an IP4-mediated inositol 1,3,4,5-tetrakisphosphate receptor, are located on the outer nuclear membrane. Thus, ATP and IP4, depending on external free calcium concentrations, are responsible for filling the nuclear envelope calcium pool. The inositol 1,4,5-trisphosphate receptor is located on the inner nuclear membrane with its ligand binding domain facing toward the nucleoplasm. Likewise, the ryanodine receptor is located on the inner nuclear membrane and its ligand cADP-ribose is generated within the nucleus. A 120 kDa protein fragment of nuclear PLC-gamma1 is stimulated in vivo by epidermal growth factor nuclear signaling coincident with the time course of nuclear membrane epidermal growth factor receptor activation. Stimulated 120 kDa protein fragment interacts with PIKE, a nuclear GTPase, and together they form a complex with PI[3]kinase serving as a module for nuclear PI[3]K stimulation. Thus, the nucleus has its own IP(3) generating system.     

A pH-dependent molten globule transition is required for activity of the steroidogenic acute regulatory protein, StAR

The steroidogenic acute regulatory protein (StAR) simulates steroid biosynthesis by increasing the flow of cholesterol from the outer mitochondrial membrane (OMM) to the inner membrane. StAR acts exclusively on the OMM, and only StAR's carboxyl-terminal alpha-helix (C-helix) interacts with membranes. Biophysical studies have shown that StAR becomes a molten globule at acidic pH, but a physiologic role for this structural transition has been controversial. Molecular modeling shows that the C-helix, which forms the floor of the sterol-binding pocket, is stabilized by hydrogen bonding to adjacent loops. Molecular dynamics simulations show that protonation of the C-helix and adjacent loops facilitates opening and closing the sterol-binding pocket. Two disulfide mutants, S100C/S261C (SS) and D106C/A268C (DA), designed to limit the mobility of the C-helix but not disrupt overall conformation, were prepared in bacteria, and their correct folding and positioning of the disulfide bonds was confirmed. The SS mutant lost half, and the DA mutant lost all cholesterol binding capacity and steroidogenic activity with isolated mitochondria in vitro, but full binding and activity was restored to each mutant by disrupting the disulfide bonds with dithiothreitol. These data strongly support the model that StAR activity requires a pH-dependent molten globule transition on the OMM.     

Asymmetric synthesis followed by transmembrane movement of phosphatidylethanolamine in rat liver endoplasmic reticulum

Studies with phospholipase C have indicated that two-thirds of the phosphatidylethanolamine of rat liver endoplasmic reticulum is located in the inner leaflet of the membrane bilayer. Phosphatidyl[¹⁴C]ethanolamine is synthesised in microsomes incubated with CDP[¹⁴C]ethanolamine. Using phospholipase C as a probe we have observed that the labelled phospholipid is initially (1–2 min) concentrated in the ‘outer leaflet’ of the membrane bilayer. The specific activity of this pool of phosphatidylethanolamine was 3.5 times that of the inner leaflet. If, however, the microsomes were opened with 0.4% taurocholate or the French pressure cell to make both sides of the bilayer available to phospholipase C, the phosphatidylethanolamine behaves as a single pool for hydrolysis. On longer incubation, up to 30 min, with CDP[¹⁴C]ethanolamine the specific activity of the outer leaflet phosphatidylethanolamine becomes close to that of the inner leaflet. In chase experiments, in which microsomal phosphatidylethanolamine was labelled by incubation with CDP[¹⁴C]ethanolamine for 1 min, the reaction stopped by addition of calcium, and the microsomes isolated by centrifugation and reincubated, labelled phosphatidylethanolamine was transferred from the ‘outer leaflet’ to the ‘inner leaflet’, so that both were equally labelled. These observations suggest that phosphatidylethanolamine is synthesised at the cytoplasmic leaflet of the endoplasmic reticulum and subsequently transferred across the membrane to the cisternal leaflet of the bilayer. Transmembrane movement is apparently temperature-dependent and independent of continued synthesis of phosphatidylethanolamine.     

Distribution and Correlation of Events During Thermal Inactivation of Bacillus megaterium Spores

Aqueous suspensions of Bacillus megaterium QM B1551 spores were heated at temperatures from 75 to 85 C. The rapid initial viability loss, followed by a more gradual, almost exponential decline, was not due to mixed populations with discrete heat resistances. The slight "tailing" below 0.01% survival was not the result of heat adaptation. Loss of viability was more rapid than loss of dipicolinic acid (DPA) and germinability and, although these events could not be correlated by use of simple kinetic plots, they had similar activation energies (80 to 90 kcal/mole). Probability (probit) plots of per cent survival as a function of logarithmic time yielded not the single line expected, if the heat resistances of individuals in the population were log-normally distributed, but two straight lines intersecting at a survival level of 1 to 6%. Probit-intersects occurred at times ranging from 8 min for spores heated at 85 C, to 310 min at 75 C. Probit-intersects for DPA release and loss in germinability occurred at the same time as for survival, but at much higher levels of retention. There appeared to be two subpopulations, both log-normally distributed but with different mechanisms of kill. Ninety-four to 99% of the spores died via injury to the cell-division process but retained germinability; the remaining smaller subpopulation (1 to 6%) was nonviable because of loss of the ability to germinate.