Electrical microarrays for highly sensitive detection of multiplex PCR products from biological agents

For the sensitive detection of amplicons derived from diagnostic PCR, a novel electrical low-density microarray is applied and compared to state-of-the-art quantitative real-time PCR. The principle of the electrochemical method and the effective use for analysis are described. Interdigitated array gold electrodes (IDA-E) embedded into a silicon chip are the core technology of the fully automated compact biosensor system, basing on enzyme coupled electrochemical detection. The biointerface is built up with thiol-modified capture oligonucleotides on gold and mediates the specific recognition of hybridised target DNA amplified with uniplex or multiplex PCR. In here we show the potential of the designed electrical microarray to function as an advanced screening method for the parallel detection of a panel of the four pathogens Bacillus anthracis, Yersinia pestis, Francisella tularensis and ortho pox viruses (genus), which are among the most relevant biowarfare agents. PCR products, generated from 10 to 50 gene equivalents, have been detected reproducibly. The experiments with varying pathogen amounts showed the good reliability and the high sensitivity of the method, equivalent to optical real-time PCR detection systems. Without PCR the total assay time amounts to 27 min. The advantage of the combination of multiplex-PCR with electrical microarray detection avoiding intensive PCR probe labelling strategies is illustrated.     

Microfluidic lab-on-a-chip for microbial identification on a DNA microarray

A lab-on-a-chip for the rapid identification of microbial species has been developed for a water monitoring system. We employed highly parallel DNA microarrays for the direct profiling of microbial populations in a sample. For the integration and minimization of the DNA microarray protocols for bacterial identification, rRNA was selected as a target nucleotide for probe:target hybridization. In order to hybridize target rRNA onto the probe oligonucleotide, intact rRNA extracted fromE. coli rRNA was fragmented via chemical techniques in the lab-on-a-chip platform. The size of fragmented rRNA was less than 400 base pairs, which was confirmed by polyacrylamide gel electrophoresis. The fragmented rRNA was also labeled using fluorescent chemicals. The lab-on-a-chip for fragmentation and labeling includes a PDMS chaotic mixer for efficient mixing, operated by flow pressure. In addition, the fragmented rRNA was hybridized successfully on a DNA microarray with sample recirculation on a microfluidic platform. Our fragmentation and labeling technique will have far-reaching applications, which require rapid but complicated chemical genetic material processing on a lab-on-a-chip platform.     

Microfluidic device reads up to four consecutive base pairs in DNA sequencing-by-synthesis

We have developed the first fully integrated microfluidic system for DNA sequencing-by-synthesis. Using this chip and fluorescence detection, we have reliably sequenced up to 4 consecutive bps. The described sequencer can be integrated with other microfluidic components on the same chip to produce true lab-on-a-chip technology. The surface chemistry that was designed to anchor the DNA to elastomeric microchannels is useful in a broad range of studies and applications.     

Using a microfluidic device for 1 microl DNA microarray hybridization in 500 s

This work describes a novel and simple modification of the current microarray format. It reduces the sample/reagent volume to 1 microl and the hybridization time to 500 s. Both 20mer and 80mer oligonucleotide probes and singly labeled 20mer and 80mer targets, representative of the T-cell acute lymphocytic leukemia 1 (TAL1) gene, have been used to elucidate the performance of this hybridization approach. In this format, called shuttle hybridization, a conventional flat glass DNA microarray is integrated with a PMMA microfluidic chip to reduce the sample and reagent consumption to 1/100 of that associated with the conventional format. A serpentine microtrench is designed and fabricated on a PMMA chip using a widely available CO2 laser scriber. The trench spacing is compatible with the inter-spot distance in standard microarrays. The microtrench chip and microarray chip are easily aligned and assembled manually so that the microarray is integrated with a microfluidic channel. Discrete sample plugs are employed in the microchannel for hybridization. Flowing through the microchannel with alternating depths and widths scrambles continuous sample plug into discrete short plugs. These plugs are shuttled back and forth along the channel, sweeping over microarray probes while re-circulation mixing occurs inside the plugs. Integrating the microarrays into the microfluidic channel reduces the DNA-DNA hybridization time from 18 h to 500 s. Additionally, the enhancement of DNA hybridization reaction by the microfluidic device is investigated by determining the coefficient of variation (CV), the growth rate of the hybridization signal and the ability to discriminate single-base mismatch. Detection limit of 19 amol was obtained for shuttle hybridization. A 1 mul target was used to hybridize with an array that can hold 5000 probes.     

Characterization of DNA chips by nanogold staining

DNA microarray is an important tool in biomedical research. Up to now, there are no chips that can allow both quality analysis and hybridization using the same chip. It is risky to draw conclusions from results of different chips if there is no knowledge of the quality of the chips before hybridization. In this article, we report a colorimetric method to do quality control on an array. The quality analysis of probe spots can be obtained by using gold nanoparticles with positive charges to label DNA through electrostatic attraction. The probe spots can also be detected by a simple personal computer scanner. Gold nanoparticles deposited on a glass surface can be dissolved in bromine-bromide solution. The same microarray treated with gold particles staining and destaining can still be used for hybridization with nearly the same efficiency. This approach makes quality control of a microarray chip feasible and should be a valuable tool for biomarker discovery in the future.     

针对多种强致病性病毒的基因芯片检测方法的建立

为了制备灵敏的可检测多种烈性病毒性病原体的基因芯片,本研究设计了针对21种烈性病毒性病原体的基因芯片检测探针,每种5条,长50 bp.并以甲病毒属的基孔肯亚病毒和黄病毒属的黄热病毒细胞培养物为检测模型,摸索了合适的病毒基因处理与扩增方法.将提取的病毒RNA先用DNase Ⅰ处理,以去除掉其中的DNA分子,然后利用病毒属特异性引物进行反转录,以引导病毒基因组的合成,从而尽可能地减少宿主细胞基因成分的干扰.进行随机PCR扩增后将扩增产物与基因芯片进行杂交,分别出现了4条基孔肯亚病毒探针信号和5条黄热病毒的探针信号,说明所设计的检测探针具有较好的特异性,可用于这2种病毒的特异性检测.这种病毒基因样品的处理和扩增方法也为此基因芯片的临床应用奠定了基础.     

质粒pCAMBIA1301的检测

用引物延伸芯片法实现对转基因水稻中 生物芯片技术是生物技术和微制造技术的融合, 已广泛用于生命科学的研究及实践、医学科研及临床、药物设计、环境保护、农业、军事等各个领域。而基因芯片是生物芯片中的一种,是指将大量基因探针分子固定于支持物上,然后与标记的样品进行杂交,所以一次可对大量核酸分子进行检测分析,从而解决了传统核酸印迹杂交技术操作复杂、自动化程度低、检测目的分子数量少、效率低等不足。文章探讨了用基因芯片这一新的检测手段对转基因植物的初步检测,采用一种新的反应机制－引物延伸芯片法（arrayed primer extension）,实现了样品扩增和杂交的一步化,而在传统的基因芯片检测中要需要两步来完成,从而为目前基因芯片中大片段样品的检测提供了一种可能性。 Abstract: Biochip technology which had emerged from the fusion of biotechnology and micro/nanofabrication technology at the end of 1980s has been widely used in life science ,medicine,clinical diagnosis,durg design,agricμLture,envioment pretection and strategics. DNA microarray (also call gene chip,DNA chip),one kind of biochips,is small chip containing many oligonucleotide probe .It can hybridize with labelled sample which makes it possible to detect large numbers of oligonucleotides at one time.So DNA microarray can overcome the disadvantage of traditional hybridization technology such as complexity,low automatization,poor efficiency and amount of detcting molecμLes. This paper describes a new method to detect transgenic plant with gene chip.We have developed a novel arrayed-primer extension technique. It combines hybridization and PCR at one step, while two separate steps are needed in the ordinary DNA microarray, therefore our method provide a feasibility to detect long DNA fragment .     

Using a microfluidic device for 1 μl DNA microarray hybridization in 500 s

This work describes a novel and simple modification of the current microarray format. It reduces the sample/reagent volume to 1 μl and the hybridization time to 500 s. Both 20mer and 80mer oligonucleotide probes and singly labeled 20mer and 80mer targets, representative of the T-cell acute lymphocytic leukemia 1 (TAL1) gene, have been used to elucidate the performance of this hybridization approach. In this format, called shuttle hybridization, a conventional flat glass DNA microarray is integrated with a PMMA microfluidic chip to reduce the sample and reagent consumption to 1/100 of that associated with the conventional format. A serpentine microtrench is designed and fabricated on a PMMA chip using a widely available CO₂ laser scriber. The trench spacing is compatible with the inter-spot distance in standard microarrays. The microtrench chip and microarray chip are easily aligned and assembled manually so that the microarray is integrated with a microfluidic channel. Discrete sample plugs are employed in the microchannel for hybridization. Flowing through the microchannel with alternating depths and widths scrambles continuous sample plug into discrete short plugs. These plugs are shuttled back and forth along the channel, sweeping over microarray probes while re-circulation mixing occurs inside the plugs. Integrating the microarrays into the microfluidic channel reduces the DNA–DNA hybridization time from 18 h to 500 s. Additionally, the enhancement of DNA hybridization reaction by the microfluidic device is investigated by determining the coefficient of variation (CV), the growth rate of the hybridization signal and the ability to discriminate single-base mismatch. Detection limit of 19 amol was obtained for shuttle hybridization. A 1 μl target was used to hybridize with an array that can hold 5000 probes.     

重要肠道病原菌多重PCR-基因芯片检测方法研究

目的:建立并初步评价一种针对重要肠道病原菌的多重PCR 基因芯片检测方法。方法：对筛选出的特异引物进行多重PCR优化,将引物分别按种属内混合和种属间混合的方案排查引物间的竞争性抑制现象,再将不同菌属的模板混合,用相对应的混合引物扩增,探寻高效特异的引物组合。分别掺入和不掺入荧光素,验证其对混合PCR反应的影响,并与芯片杂交,探寻多重PCR扩增效率对芯片杂交的影响。分析不同数量引物组合产生的杂交结果,筛选出无交叉反应的最优引物组合。结果:种属内引物混合均得到特异性扩增结果。种属间混合霍乱弧菌和空肠弯曲菌得到部分预期条带,随着混合引物数量的增加,交叉抑制现象也增多。杂交信号强度随多重PCR扩增效率的增加而增强。反应中掺入荧光素的扩增条带产量低于无荧光素的产物。可将35对混合引物拆成3个体系分别标记样品,以避免假阴性结果。结论:PCR反应中掺入荧光素降低扩增效率和杂交效率,但并不影响对杂交结果的判读和数据分析。基因芯片杂交信号强度取决于多重PCR的扩增效率。肠道病原菌多重PCR 基因芯片检测方法具有较高的特异性,混合PCR可以分别按照种属内和种属间的引物组合方案用于多病原的筛检。该基因芯片检测可以采用3个引物体系完成样品标记。     

Polymerase chain reaction/ligase detection reaction/hybridization assays using flow-through microfluidic devices for the detection of low-abundant DNA point mutations

We have microfabricated a flow-through biochip for the analysis of single base mutations in genomic DNA using two different materials: (1) a polycarbonate (PC) chip for performing a primary polymerase chain reaction (PCR) followed by an allele-specific ligation detection reaction (LDR) and (2) a poly(methyl methacrylate) (PMMA) chip for the detection of the LDR products using a universal array platform. The operation of the device was demonstrated by detecting low-abundant DNA mutations in gene fragments (K-ras) that carry point mutations with high diagnostic value for colorectal cancers. The PC microchip was used for sequential PCR/LDR in a continuous-flow format, in which the following three steps were carried out: (1) exponential amplification of gene fragments from genomic DNA; (2) mixing of the resultant PCR product with a LDR mixture via a Y-shaped passive micromixer and (3) ligation of two primers only when the particular mutation was present in the genomic DNA. A PMMA chip was employed as the microarray device, where zip code sequences (24-mer), which were complementary to sequences present on the discriminating primer, were micro-printed into fluidic channels embossed into the PMMA substrate. We successfully demonstrate the ability to detect one mutant DNA in 80 normal sequences with the integrated microfluidic device. The PCR/LDR/hybridization assay using the microchips performed the entire assay at a relatively fast processing speed: 18.7 min for PCR, 8.1 min for LDR, 5 min for hybridization, 10 min for washing and 2.6 min for fluorescence scanning (total processing time=ca. 50 min) with an order of magnitude reduction in reagents compared to bench-top formats.     

DNA microarray to detect and identify trichothecene- and moniliformin-producing Fusarium species

AIMS: To develop a DNA microarray for easy and fast detection of trichothecene- and moniliformin-producing Fusarium species. METHOD AND RESULTS: A DNA microarray was developed for detection and identification of 14 trichothecene- and moniliformin-producing species of the fungal genus Fusarium. The array could also differentiate between four species groups. Capture probes were designed based on recent phylogenetic analyses of translation elongation factor-1 alpha (TEF-1alpha) sequences. Particular emphasis was put on designing capture probes corresponding to groups or species with particular mycotoxigenic synthetic abilities. A consensus PCR amplification of a part of the TEF-1alpha is followed by hybridization to the Fusarium chip and the results are visualized by a colorimetric Silverquant detection method. We validated the Fusarium chip against five naturally infected cereal samples for which we also have morphological and chemical data. The limit of detection was estimated to be less than 16 copies of genomic DNA in spiked commercial wheat flour. CONCLUSIONS: The current Fusarium chip proved to be a highly sensitive and fast microarray for detection and identification of Fusarium species. We postulate that the method also has potential for (semi-)quantification. SIGNIFICANCE AND IMPACT OF THE STUDY: The Fusarium chip may prove to be a very valuable tool for screening of cereal samples in the food and feed production chain, and may facilitate detection of new or introduced Fusarium spp.     

Multiplexed DNA quantification by spectroscopic shift of two microsphere cavities

We have developed a novel, spectroscopic technique for high-sensitivity, label-free DNA quantification. We demonstrate that an optical resonance (whispering gallery mode) excited in a micron-sized silica sphere can be used to detect and measure nucleic acids. The surface of the silica sphere is chemically modified with oligonucleotides. We show that hybridization to the target DNA leads to a red shift of the optical resonance wavelength. The sensitivity of this resonant technique is measured as 6 pg/mm(2) mass loading, higher as compared to most optical single-pass devices such as surface plasmon resonance biosensors. Furthermore, we show that each microsphere can be identified by its unique resonance wavelength. Specific, multiplexed DNA detection is demonstrated by using two microspheres. The multiplexed signal from two microspheres allows us to discriminate a single nucleotide mismatch in an 11-mer oligonucleotide with a high signal-to-noise ratio of 54. This all-photonic whispering gallery mode biosensor can be integrated on a semiconductor chip that makes it an easy to manufacture, analytic component for a portable, robust lab-on-a-chip device.     

Dramatic increase in signal by integration of polymerase chain reaction and hybridization on surface of DNA microarray

The cumbersome process required for diagnosis by DNA microarray can be simplified by simple extraction of nucleic acid from cells and by integration of liquid-phase polymerase chain reaction (PCR) and hybridization on the surface of a microarray slide. An unexpected benefit was the large (five- to sixfold) increase in detection signal that also is translated into an increase in sensitivity and the confidence level of diagnosis. The large increase in the detection signal appears to be due to participation of PCR primers as well as to extension of the immobilized capture probes during the hybridization process. The reason for the large increase in signal is not clear in view of only one round of DNA synthesis during the hybridization step. The integrated process correctly identified various genotypes of human papillomavirus (HPV) in the infected clinical human cervical specimens with specificity and efficiency. The process described in this article saves labor, time, and cost and should be applicable for automation of diagnosis by DNA microarray.     

Specific molecular detection of Phytophthora sojae using conventional and real-time PCR

Phytophthora rot, caused by Phytophthora sojae, is one of the most damaging diseases of soybean (Glycine max) worldwide. This disease can be difficult to diagnose and other Phytophthora species can infect soybean. Accurate diagnosis is important for management of Phytophthora rot. The objective of this study was to evaluate polymerase chain reaction (PCR) methods for rapid and specific detection of P. sojae and diagnosis of Phytophthora rot. PCR assays using two sets of primers (PS and PSOJ) that target the ITS region were evaluated for specificity and sensitivity to P. sojae. Genomic DNA extracted from 11 species of Phytophthora and 19 other species of fungal and oomycete pathogens were used to test the specificity of each primer set. The previously published PS primers amplified DNA from P.?sojae and from four other Phytophthora species using conventional PCR, indicating they are not specific for P. sojae. The new PSOJ primers amplified DNA only from P. sojae using conventional and real-time PCR and not from Phytophthora sansomeana, which has been found in soybean production areas, indicating that they are specific for P. sojae. The PSOJ primers were also used to detect P. sojae in diseased soybean tissue and infested soil. The PCR assays based on the PSOJ primers are specific, rapid, and sensitive tools for the detection of P. sojae.     

Optimization and clinical validation of a pathogen detection microarray

DNA microarrays used as 'genomic sensors' have great potential in clinical diagnostics. Biases inherent in random PCR-amplification, cross-hybridization effects, and inadequate microarray analysis, however, limit detection sensitivity and specificity. Here, we have studied the relationships between viral amplification efficiency, hybridization signal, and target-probe annealing specificity using a customized microarray platform. Novel features of this platform include the development of a robust algorithm that accurately predicts PCR bias during DNA amplification and can be used to improve PCR primer design, as well as a powerful statistical concept for inferring pathogen identity from probe recognition signatures. Compared to real-time PCR, the microarray platform identified pathogens with 94% accuracy (76% sensitivity and 100% specificity) in a panel of 36 patient specimens. Our findings show that microarrays can be used for the robust and accurate diagnosis of pathogens, and further substantiate the use of microarray technology in clinical diagnostics.     

A disposable and cost efficient microfluidic device for the rapid chip-based electrical detection of DNA

Requirements for a point-of-care device are an easy and robust read-out and – above all – a simple handling. We integrated an established robust electrical read-out for DNA-chips into a microfluidic device, thereby creating an automated analysis system that combines the necessary steps for a chip-based analysis. It is based on the electrical detection of biotin-labeled DNA in a gap between two microstructured electrodes on the surface of a DNA-chip. The biotin serves as binding molecule for streptavidin-conjugated horseradish peroxidase. A following enzyme-induced silver deposition bridges the gap by a conductive layer. The miniaturized chip gives the possibility to realize a durable system suitable for point-of-care applications.To enable an initial automation, all corresponding process steps were executed in a miniaturized silicone flow cell. The required defined temperatures for the hybridization and the washing steps can be adjusted by a heating foil.This paper characterizes the performance of the flow cell based system in terms of reaction speed and analysis time, sensitivity as well as specificity, and the comparison to a conventional system, without flow cell. These first steps of automation and integration will help to realize a laboratory-independent bioanalytical tool, for the use outside of specialized laboratories for fast analysis of different chemical and biological applications.     

Microarray detection of food-borne pathogens using specific probes prepared by comparative genomics

In order to design a method for the accurate detection and identification of food-borne pathogens, we used comparative genomics to select 70-mer oligonucleotide probes specific for 11 major food-borne pathogens (10 overlapping probes per pathogen) for use in microarray analysis. We analyzed the hybridization pattern of this constructed microarray with the Cy3-labeled genomic DNA of various food-borne pathogens and other bacteria. Our microarray showed a highly specific hybridization pattern with the genomic DNA of each food-borne pathogen; little unexpected cross-hybridization was observed. Microarray data were analyzed and clustered using the GenePix Pro 6.0 and GeneSpring GX 7.3.1 programs. The analyzed dendrogram revealed the discriminating power of constructed microarray. Each food-borne pathogen clustered according to its hybridization specificity and non-pathogenic species were discriminated from pathogenic species. Our method can be applied to the rapid and accurate detection and identification of food-borne pathogens in the food industry. In addition, this study demonstrates that genome sequence comparison and DNA microarray analysis have a powerful application in epidemiologic and taxonomic studies, as well as in the food safety and biodefense fields.     

Microarray analysis of microbial virulence factors.

Hybridization with oligonucleotide microchips (microarrays) was used for discrimination among strains of Escherichia coli and other pathogenic enteric bacteria harboring various virulence factors. Oligonucleotide microchips are miniature arrays of gene-specific oligonucleotide probes immobilized on a glass surface. The combination of this technique with the amplification of genetic material by PCR is a powerful tool for the detection of and simultaneous discrimination among food-borne human pathogens. The presence of six genes (eaeA, slt-I, slt-II, fliC, rfbE, and ipaH) encoding bacterial antigenic determinants and virulence factors of bacterial strains was monitored by multiplex PCR followed by hybridization of the denatured PCR product to the gene-specific oligonucleotides on the microchip. The assay was able to detect these virulence factors in 15 Salmonella, Shigella, and E. coli strains. The results of the chip analysis were confirmed by hybridization of radiolabeled gene-specific probes to genomic DNA from bacterial colonies. In contrast, gel electrophoretic analysis of the multiplex PCR products used for the microarray analysis produced ambiguous results due to the presence of unexpected and uncharacterized bands. Our results suggest that microarray analysis of microbial virulence factors might be very useful for automated identification and characterization of bacterial pathogens.     

Rapid detection and species identification of Mycobacterium spp. using real-time PCR and DNA-microarray

Infections with mycobacteria are an important issue in public health care. Here we present a "proof-of-principle" concept for the identification of 37 different Mycobacterium species using 5' exonuclease real-time PCR and DNA microarray based on the region upstream of the 65 kDa heat shock protein. With our two PCR probes, one complementary to all mycobacteria species, the other specific for the M. tbc-complex, 34 species were properly classified by real-time PCR. After reamplification and hybridization to a DNA microarray, all species showed a specific pattern. All 10 blindly tested positive cultures revealed a positive real-time PCR signal with the genus probe. After reamplification and hybridization, six samples could unambiguously be identified. One sample showed a mixture of presumably three species-specific patterns and sequencing the 16S rRNA confirmed the presence of a mixture. The hybridization results of three specimens could not be interpreted because the signal to background ratio was not sufficient. Two samples considered as negative controls (LAL Reagent Water (Cambrex) and DNA of Candida albicans) gave neither a genus nor a M. tbc-complex positive PCR signal. Based on these results we consider our method to be a promising tool for the rapid identification of different mycobacteria species, with the advantage of possible identification of mixed infections or contaminations.     

The Potential of Genomic Approaches to Rotifer Ecology

Rotifers are a key component of many freshwater ecosystems, but surveys of the composition of rotifer communities are limited by the labor-intensiveness of sample processing, particularly of non-planktonic taxa, and by the shortage of investigators qualified to identify a broad range of rotifer species. Additional problems are posed by species that must be identified from living specimens, and by members of cryptic species complexes. As DNA sequencing becomes easier and cheaper, it has become practical to obtain representative DNA sequences from identified rotifer species for use in genome-based surveys to determine which rotifers are present in a new sample, avoiding the difficulties of traditional surveys. Here we discuss two genome-based tools used in surveys of microbial communities: serial analysis of gene tags (SAGT) and microarray hybridization. SAGT is a method for inexpensively obtaining characteristic short DNA sequences from a sample that can both identify taxa for which the tag sequence is known and signal the presence of additional uncharacterized species. Microarray hybridization allows detection of DNA sequences in the sample that are identical or similar to sequences present on the microarray. We also report the construction and hybridization of a small microarray of rotifer sequences, demonstrating that this method can discriminate among bdelloid families, and is likely to make much finer discriminations if appropriate sequences are present on the microarray. These techniques are most powerful when combined with traditional systematics in collaborative efforts, which may be fostered through the data base of rotifer biology, WheelBase (http://jbpc.mbl.edu/wheelbase).