Electron crystallography of biomolecules: mysterious membranes and missing cones

One of the major challenges facing structural biologists today is the determination of high-resolution 3D structures of membrane proteins. The requirement for detergent molecules to be present makes X-ray crystallography particularly difficult, coupled with the added problems of isolating sufficient (viable) protein samples at high enough concentrations to yield 3D crystals. One technique that enables structural determination with fewer constraints is electron crystallography of two-dimensional crystals, in which small amounts of membrane proteins can be studied in native form in lipid bilayers.     

头孢曲松耐药菌通过调整能量代谢相关蛋白产生耐药性

随着抗生素药物的开发与利用,细菌在对抗药物过程中逐渐发展出各种不同的耐药机制.近年来高通量的蛋白质组学技术已逐渐用于细菌耐药性机理研究,但主要集中在对细菌外膜蛋白的作用进行分析.本文采用2-D native/SDS PAGE方法从蛋白质复合物角度分析接近生理条件的胞浆蛋白在头孢曲松耐药性中的作用.结果发现8个耐药性相关蛋白质,通过对蛋白质功能分析,揭示了细菌通过调整能量代谢相关蛋白产生耐药性的新机制.进一步对相关菌株的次抑菌浓度和生存率分析,提示MalP和SucC等关键蛋白质可作为设计和开发新型抗菌分子的作用靶点.     

The New York Consortium on Membrane Protein Structure (NYCOMPS): a high-throughput platform for structural genomics of integral membrane proteins

The New York Consortium on Membrane Protein Structure (NYCOMPS) was formed to accelerate the acquisition of structural information on membrane proteins by applying a structural genomics approach. NYCOMPS comprises a bioinformatics group, a centralized facility operating a high-throughput cloning and screening pipeline, a set of associated wet labs that perform high-level protein production and structure determination by x-ray crystallography and NMR, and a set of investigators focused on methods development. In the first three years of operation, the NYCOMPS pipeline has so far produced and screened 7,250 expression constructs for 8,045 target proteins. Approximately 600 of these verified targets were scaled up to levels required for structural studies, so far yielding 24 membrane protein crystals. Here we describe the overall structure of NYCOMPS and provide details on the high-throughput pipeline.     

Electron crystallography - the waking beauty of structural biology

Since its debut in the mid 1970s, electron crystallography has been a valuable alternative in the structure determination of biological macromolecules. Its reliance on single-layered or double-layered two-dimensionally ordered arrays and the ability to obtain structural information from small and disordered crystals make this approach particularly useful for the study of membrane proteins in a lipid bilayer environment. Despite its unique advantages, technological hurdles have kept electron crystallography from reaching its full potential. Addressing the issues, recent initiatives developed high-throughput pipelines for crystallization and screening. Adding progress in automating data collection, image analysis and phase extension methods, electron crystallography is poised to raise its profile and may lead the way in exploring the structural biology of macromolecular complexes.     

High-throughput fluorescent tagging of full-length Arabidopsis gene products in planta

We developed a high-throughput methodology, termed fluorescent tagging of full-length proteins (FTFLP), to analyze expression patterns and subcellular localization of Arabidopsis gene products in planta. Determination of these parameters is a logical first step in functional characterization of the approximately one-third of all known Arabidopsis genes that encode novel proteins of unknown function. Our FTFLP-based approach offers two significant advantages: first, it produces internally-tagged full-length proteins that are likely to exhibit native intracellular localization, and second, it yields information about the tissue specificity of gene expression by the use of native promoters. To demonstrate how FTFLP may be used for characterization of the Arabidopsis proteome, we tagged a series of known proteins with diverse subcellular targeting patterns as well as several proteins with unknown function and unassigned subcellular localization.     

High-throughput protein crystallization

The combinatorial chemistry industry has made major advances in the handling and mixing of small volumes, and in the development of robust liquid-handling systems. In addition, developments have been made in the area of material handling for the high-throughput drug screening and combinatorial chemistry fields. Lastly, improvements in beamline optics at synchrotron sources have enabled the use of flash-frozen micron-sized (10-50 microm) crystals. The combination of these and other recent advances will make high-throughput protein crystallography possible. Further advances in high-throughput methods of protein crystallography will require application of the above developments and the accumulation of success/failure data in a more systematic manner. Major changes in crystallography technology will emerge based on the data collected by first-generation high-throughput systems.     

High-throughput protein crystallization

High-throughput structural biology is a focus of a number of academic and pharmaceutical laboratories around the world. The use of X-ray crystallography in these efforts is critically dependent on high-throughput protein crystallization. The application of current protocols yields crystal leads for approximately 30% of the input proteins and well-diffracting crystals for a smaller fraction. Increasing the success rate will require a multidisciplinary approach that must invoke techniques from molecular biology, protein biochemistry, biophysics, artificial intelligence, and automation.     

Assessing Two-dimensional Crystallization Trials of Small Membrane Proteins for Structural Biology Studies by Electron Crystallography

Electron crystallography has evolved as a method that can be used either alternatively or in combination with three-dimensional crystallization and X-ray crystallography to study structure-function questions of membrane proteins, as well as soluble proteins. Screening for two-dimensional (2D) crystals by transmission electron microscopy (EM) is the critical step in finding, optimizing, and selecting samples for high-resolution data collection by cryo-EM. Here we describe the fundamental steps in identifying both large and ordered, as well as small 2D arrays, that can potentially supply critical information for optimization of crystallization conditions.By working with different magnifications at the EM, data on a range of critical parameters is obtained. Lower magnification supplies valuable data on the morphology and membrane size. At higher magnifications, possible order and 2D crystal dimensions are determined. In this context, it is described how CCD cameras and online-Fourier Transforms are used at higher magnifications to assess proteoliposomes for order and size.While 2D crystals of membrane proteins are most commonly grown by reconstitution by dialysis, the screening technique is equally applicable for crystals produced with the help of monolayers, native 2D crystals, and ordered arrays of soluble proteins. In addition, the methods described here are applicable to the screening for 2D crystals of even smaller as well as larger membrane proteins, where smaller proteins require the same amount of care in identification as our examples and the lattice of larger proteins might be more easily identifiable at earlier stages of the screening.Download video file.^{(59M, mov)}     

Growth of Large and Highly Ordered 2D Crystals of a K+ Channel,Structural Role of Lipidic Environment

2D crystallography has proven to be an excellent technique to determine the 3D structure of membrane proteins. Compared to 3D crystallography, it has the advantage of visualizing the protein in an environment closer to the native one. However, producing good 2D crystals is still a challenge and little statistical knowledge can be gained from literature. Here, we present a thorough screening of 2D crystallization conditions for a prokaryotic inwardly rectifying potassium channel (>130 different conditions). Key parameters leading to very large and well-organized 2D crystals are discussed. In addition, the problem of formation of multilayers during the growth of 2D crystals is also addressed. An intermediate resolution projection map of KirBac3.1 at 6 Å is presented, which sheds (to our knowledge) new light on the structure of this channel in a lipid environment.     

应用优化的双向电泳技术建立纤维堆囊菌So0157-2蛋白质组数据库

堆囊菌丰富的次级代谢产物是新药的重要来源,而蛋白质组学分析是研究代谢调控的有效方法．然而堆囊菌含有大量的胞外多糖以及黏液,干扰了蛋白质组学分析中蛋白质的溶解度、分辨率及重现性．为了高通量地筛选Sorangium cellulosum So0157-2表达的特异性蛋白,实验优化了S. cellulosum So0157-2双向电泳方法．首先,S. cellulosum So0157-2蛋白在裂解液中有更好的溶解度．pH 3～10非线性胶条和1 mg的蛋白上样量适用于第一向等电聚焦,分别提高了蛋白质点的分辨率和低丰度蛋白质的表达．15% SDS-PAGE 改善了S. cellulosum So0157-2蛋白分离的分辨率和重现性．最终,通过优化的双向电泳方法获得了S. cellulosum So0157-2 在M26培养基中培养3天的全蛋白质表达谱,并检测到552个蛋白质点．进而对表达蛋白通过MALDI-TOF-MS进行质谱鉴定,其中474个蛋白质得到鉴定,鉴定率85.9%．得到鉴定的蛋白质包括细胞结构和功能组分,以及细胞代谢合成酶类,其中8个蛋白质与糖类的转化和代谢相关,这有助于糖基化埃博霉素A的深入研究．该优化方法为进一步建立纤维堆囊菌So0157-2在各种培养条件下的蛋白质组表达数据库打下基础．     

Membrane protein structure determination by electron crystallography

During the past year, electron crystallography of membrane proteins has provided structural insights into the mechanism of several different transporters and into their interactions with lipid molecules within the bilayer. From a technical perspective there have been important advances in high-throughput screening of crystallization trials and in automated imaging of membrane crystals with the electron microscope. There have also been key developments in software, and in molecular replacement and phase extension methods designed to facilitate the process of structure determination.     

High-throughput crystallization-to-structure pipeline at RIKEN SPring-8 Center

A high-throughput crystallization-to-structure pipeline for structural genomics was recently developed at the Advanced Protein Crystallography Research Group of the RIKEN SPring-8 Center in Japan. The structure determination pipeline includes three newly developed technologies for automating X-ray protein crystallography: the automated crystallization and observation robot system "TERA", the SPring-8 Precise Automatic Cryosample Exchanger "SPACE" for automated data collection, and the Package of Expert Researcher's Operation Network "PERON" for automated crystallographic computation from phasing to model checking. During the 5 years following April, 2002, this pipeline was used by seven researchers to determine 138 independent crystal structures (resulting from 437 purified proteins, 234 cryoloop-mountable crystals, and 175 diffraction data sets). The protocols used in the high-throughput pipeline are described in this paper.     

A Technique for High-Throughput Protein Crystallization in Ionically Cross-Linked Polysaccharide Gel Beads for X-Ray Diffraction Experiments

A simple technique for high-throughput protein crystallization in ionically cross-linked polysaccharide gel beads has been developed for contactless handling of crystals in X-ray crystallography. The method is designed to reduce mechanical damage to crystals caused by physical contact between crystal and mount tool and by osmotic shock during various manipulations including cryoprotection, heavy-atom derivatization, ligand soaking, and diffraction experiments. For this study, protein crystallization in alginate and κ-carrageenan gel beads was performed using six test proteins, demonstrating that proteins could be successfully crystallized in gel beads. Two complete diffraction data sets from lysozyme and ID70067 protein crystals in gel beads were collected at 100 K without removing the crystals; the results showed that the crystals had low mosaicities. In addition, crystallization of glucose isomerase was carried out in alginate gel beads in the presence of synthetic zeolite molecular sieves (MS), a hetero-epitaxic nucleant; the results demonstrated that MS can reduce excess nucleation of this protein in beads. To demonstrate heavy-atom derivatization, lysozyme crystals were successfully derivatized with K₂PtBr₆ within alginate gel beads. These results suggest that gel beads prevent serious damage to protein crystals during such experiments.     

Life in the fast lane for protein crystallization and X-ray crystallography

The common goal for structural genomic centers and consortiums is to decipher as quickly as possible the three-dimensional structures for a multitude of recombinant proteins derived from known genomic sequences. Since X-ray crystallography is the foremost method to acquire atomic resolution for macromolecules, the limiting step is obtaining protein crystals that can be useful of structure determination. High-throughput methods have been developed in recent years to clone, express, purify, crystallize and determine the three-dimensional structure of a protein gene product rapidly using automated devices, commercialized kits and consolidated protocols. However, the average number of protein structures obtained for most structural genomic groups has been very low compared to the total number of proteins purified. As more entire genomic sequences are obtained for different organisms from the three kingdoms of life, only the proteins that can be crystallized and whose structures can be obtained easily are studied. Consequently, an astonishing number of genomic proteins remain unexamined. In the era of high-throughput processes, traditional methods in molecular biology, protein chemistry and crystallization are eclipsed by automation and pipeline practices. The necessity for high-rate production of protein crystals and structures has prevented the usage of more intellectual strategies and creative approaches in experimental executions. Fundamental principles and personal experiences in protein chemistry and crystallization are minimally exploited only to obtain “low-hanging fruit” protein structures. We review the practical aspects of today's high-throughput manipulations and discuss the challenges in fast pace protein crystallization and tools for crystallography. Structural genomic pipelines can be improved with information gained from low-throughput tactics that may help us reach the higher-bearing fruits. Examples of recent developments in this area are reported from the efforts of the Southeast Collaboratory for Structural Genomics (SECSG).     

In vitro selection of nucleoprotein enzymes.

Natural nucleic acids frequently rely on proteins for stabilization or catalytic activity. In contrast, nucleic acids selected in vitro can catalyze a wide range of reactions even in the absence of proteins. To augment selected nucleic acids with protein functionalities, we have developed a technique for the selection of protein-dependent ribozyme ligases. After randomizing a previously selected ribozyme ligase, L1, we selected variants that required one of two protein cofactors, a tyrosyl transfer RNA (tRNA) synthetase (Cyt18) or hen egg white lysozyme. The resulting nucleoprotein enzymes were activated several thousand fold by their cognate protein effectors, and could specifically recognize the structures of the native proteins. Protein-dependent ribozymes can potentially be adapted to novel assays for detecting target proteins, and the selection method's generality may allow the high-throughput identification of ribozymes capable of recognizing a sizable fraction of a proteome.     

Use of detergents in two-dimensional crystallization of membrane proteins

Structure determination at high resolution is actually a difficult challenge for membrane proteins and the number of membrane proteins that have been crystallized is still small and far behind that of soluble proteins. Because of their amphiphilic character, membrane proteins need to be isolated, purified and crystallized in detergent solutions. This makes it difficult to grow the well-ordered three-dimensional crystals that are required for high resolution structure analysis by X-ray crystallography. In this difficult context, growing crystals confined to two dimensions (2D crystals) and their structural analysis by electron crystallography has opened a new way to solve the structure of membrane proteins. However, 2D crystallization is one of the major bottlenecks in the structural studies of membrane proteins. Advances in our understanding of the interaction between proteins, lipids and detergents as well as development and improvement of new strategies will facilitate the success rate of 2D crystallization. This review deals with the various available strategies for obtaining 2D crystals from detergent-solubilized intrinsic membrane proteins. It gives an overview of the methods that have been applied and gives details and suggestions of the physical processes leading to the formation of the ordered arrays which may be of help for getting more proteins crystallized in a form suitable for high resolution structural analysis by electron crystallography.     

A proteome chip approach reveals new DNA damage recognition activities in Escherichia coli

Despite the fact that many genomes have been decoded, proteome chips comprising individually purified proteins have been reported only for budding yeast, mainly because of the complexity and difficulty of high-throughput protein purification. To facilitate proteomics studies in prokaryotes, we have developed a high-throughput protein purification protocol that allowed us to purify 4,256 proteins encoded by the Escherichia coli K12 strain within 10 h. The purified proteins were then spotted onto glass slides to create E. coli proteome chips. We used these chips to develop assays for identifying proteins involved in the recognition of potential base damage in DNA. By using a group of DNA probes, each containing a mismatched base pair or an abasic site, we found a small number of proteins that could recognize each type of probe with high affinity and specificity. We further evaluated two of these proteins, YbaZ and YbcN, by biochemical analyses. The assembly of libraries containing DNA probes with specific modifications and the availability of E. coli proteome chips have the potential to reveal important interactions between proteins and nucleic acids that are time-consuming and difficult to detect using other techniques.     

Two-dimensional crystallization of the ryanodine receptor Ca2+ release channel on lipid membranes

The ryanodine receptor (RyR) is the largest known membrane protein with a total molecular mass of 2.3 x 10(3) kDa. Well ordered, two-dimensional (2D) crystals are an essential prerequisite to enable RyR structure determination by electron crystallography. Conventionally, the 2D crystallization of membrane proteins is based on a 'trial-and-error' strategy, which is both time-consuming and chance-directed. By adopting a new strategy that utilizes protein sequence information and predicted transmembrane topology, we successfully crystallized the RyR on positively charged lipid membranes. Image processing of negatively stained crystals reveals that they are well ordered, with diffraction spots of IQ < or = 4 extending to approximately 20 angstroms, the resolution attainable in negative stain. The RyR crystals obtained on the charged lipid membrane have characteristics consistent with 2D arrays that have been observed in native sarcoplasmic reticulum of muscle tissues. These crystals provide ideal materials to enable structural analysis of RyR by high-resolution electron crystallography. Moreover, the reconstituted native-like 2D array provides an ideal model system to gain structural insights into the mechanism of RyR-mediated Ca2+ signaling processes, in which the intrinsic ability of RyR oligomers to organize into a 2D array plays a crucial role.     

Differential ultracentrifugation enables deep plasma proteomics through enrichment of extracellular vesicles

Human plasma is a rich source of biomedical information and biomarkers. However, the enormous dynamic range of plasma proteins limits its accessibility to mass spectrometric (MS) analysis. Here, we show that enrichment of extracellular vesicles (EVs) by ultracentrifugation increases plasma proteome depth by an order of magnitude. With this approach, more than two thousand proteins are routinely and reproducibly quantified by label-free quantification and data independent acquisition (DIA) in single-shot liquid chromatography tandem mass spectrometry runs of less than one hour. We present an optimized plasma proteomics workflow that enables high-throughput with very short chromatographic gradients analyzing hundred samples per day with deep proteome coverage, especially when including a study-specific spectral library generated by repeated injection and gas-phase fractionation of pooled samples. Finally, we test the workflow on clinical biobank samples from malignant melanoma patients in immunotherapy to demonstrate the improved proteome coverage supporting the potential for future biomarker discovery.     

Towards defining the nuclear proteome

Background

The nucleus is a complex cellular organelle and accurately defining its protein content is essential before any systematic characterization can be considered.

Results

We report direct evidence for 2,568 mammalian proteins within the nuclear proteome: the nuclear subcellular localization of 1,529 proteins based on a high-throughput subcellular localization protocol of full-length proteins and an additional 1,039 proteins for which clear experimental evidence is documented in published literature. This is direct evidence that the nuclear proteome consists of at least 14% of the entire proteome. This dataset was used to evaluate computational approaches designed to identify additional nuclear proteins.

Conclusion

This represents direct experimental evidence that the nuclear proteome consists of at least 14% of the entire proteome. This high-quality nuclear proteome dataset was used to evaluate computational approaches designed to identify additional nuclear proteins. Based on this analysis, researchers can determine the stringency and types of lines of evidence they consider to infer the size and complement of the nuclear proteome.