Solvent effects on starch dissolution and gelatinization

The disruption of starch granular structure during dissolution in varying concentrations of N-methyl morpholine N-oxide (NMMO) has been studied using three maize starches with varying ratios of amylose and amylopectin. Behavior in NMMO has been characterized by differential scanning calorimetry (DSC), microscopy, rapid viscosity analysis (RVA), and rheometry. Exothermic transitions were observed for the three starches in both 78 and 70% NMMO; the transition changed to an endotherm at 60 and 50% NMMO. Consistent with DSC, hot stage microscopy showed that starch granules dissolved at NMMO concentrations of 78 and 70%, whereas in 60 and 50% NMMO, gelatinization behavior similar to that found for starch in water was observed. Mechanical spectroscopy revealed the dominant viscous behavior (G″ > G') of starch at NMMO concentrations of 70 and 78% and more elastic behavior (G' > G″) at lower concentrations. Starch solutions in 78% NMMO obey the Cox-Merz rule, suggesting that the solutions are homogeneous on a molecular level.     

Water dispersion kinetics during starch gelatinization

The kinetics of water dispersion during the gelatinization of dilute suspensions of maize starch was studied by analyzing changes in electrical conductance data recorded continuously with time. Several analytical methods were compared for the preliminary study of the activation energy of gelatinization. The probable mechanism of the process was investigated by a number of homogeneous and heterogeneous reaction kinetic models. A modified composite methodology coupled with a reduced-plot method was employed to fit the kinetic data. Two simultaneous elementary reactions, expressed by an autocatalytic kinetic model and a 3D moving phase-boundary rate model, predicted the overall kinetic behavior with appreciable success.     

Effect of pressure and temperature on the gelatinization of starch at various starch concentrations

The effects of pressure, temperature, and treatment time on the degree of gelatinization were determined with differential scanning calorimetry measurements for wheat starch-water mixtures with starch concentrations varying between 5 and 80 w/w %. Although simple models could be used to describe the degree of starch gelatinization as a function of pressure or temperature, a more complex model based on the Gibbs energy difference had to be used to describe the degree of gelatinization as a function of both pressure and temperature. The experimental and model data were used to construct a phase diagram for 5, 30, and 60 w/w % wheat starch-water mixtures. Data obtained from literature were in accordance with our phase diagrams. These phase diagrams can be used to estimate the degree of gelatinisation after applying a certain pressure and temperature on a starch-water mixture with starch concentrations in the range of 5 and 60 w/w %.     

Effects of Ca- and Na-lignosulfonate on starch gelatinization and network formation

The interaction of lignosulfonates with starches was examined by microscopy and viscosity measurements. 8% starch dispersions with Ca- or Na-lignosulfonate, or with only Ca²⁺ or Na⁺, were heated to 97 °C and cooled to 50 °C in a Brabender Viscograph, the gelatinization was followed by light microscopy and image analysis, and the gel network formed after cooling to 4 °C was studied under the transmission electron microscope.

The lignosulfonates (2%) delayed the initial granule swelling in all starches (native maize, waxy maize and waxy barley). The presence of ions enhanced amylose leakage resulting in lower peak viscosity. The viscosity during cooling increased more with Ca-LS than with Na-LS. With a low lignosulfonate concentration the network formed after cooling was homogeneous with fine strands. With Na-lignosulfonate, as well as with Na⁺, the network connectivity deteriorated and spherical aggregates formed. Ca-lignosulfonate induced a network with thick strands, but with Ca²⁺ the strands became thinner.     

Lysine reactivity and starch gelatinization in extruded and pelleted canine diets

Fifteen dry adult canine diets (i.e., dinners, extrudates, pellets) were collected from retailers in Wageningen, The Netherlands, and chemically and physically characterized. Quality measurements were lysine O-methylisourea (OMIU) reactivity and starch gelatinization degree (SGD). In general, extruded diets had a higher crude fat and starch content than pellets. Mean values for starch gelatinization were higher in pellets and ranged between 0.78 and 0.91. The mean reactive/total lysine ratio in extrudate samples was about 5–10% higher than in pellet samples, suggesting the presence in commercial diets of about 200 g bound lysine/kg in pellets and 120 g/kg in extrudates with bound lysine levels of canine dinners about 170 g/kg. Variation of analysed nutrients in pellets was larger than in extrudates. Inclusion of animal or vegetable ingredients, and the process variables during extrusion or pelleting, are the likely causative factors for the variation in lysine reactivity and starch gelatinization.     

The granular structure of C-type pea starch and its role in gelatinization

We have used a combination of techniques to study the structure and properties of C-type starch from pea seeds. It was found that all C-type starch granules contain both types of polymorph; the B polymorphs are in the center of the granule and are surrounded by the A polymorphs. During heating in excess salt solution the A and B polymorphs within C-type granules melt independently, giving a double transition in heat capacity and a two-step swelling, compared with single transitions for A- and B-type starches. It was shown that B polymorphs gave a transition with a lower peak temperature than A. The disruption of crystallinity during gelatinization began from the hilum area and was propagated along the granule, accompanied by swelling of disrupted areas. It is proposed that the swelling of disrupted parts of the granule decreases the melting temperature of the neighboring crystallites resulting in the progressive disruption of crystalline areas. The gelatinization process is dependent on the arrangement of A and B polymorphs within the granule. © 1998 John Wiley & Sons, Inc. Biopoly 45: 323–332, 1998     

Thermodynamic aspects of vitrification

Vitrification is a process in which a liquid begins to behave as a solid during cooling without any substantial change in molecular arrangement or thermodynamic state variables. The physical phenomenon of vitrification is relevant to both cryopreservation by freezing, in which cells survive in glass between ice crystals, and cryopreservation by vitrification in which a whole sample is vitrified. The change from liquid to solid behavior is called the glass transition. It is coincident with liquid viscosity reaching 10¹³ Poise during cooling, which corresponds to a shear stress relaxation time of several minutes. The glass transition can be understood on a molecular level as a loss of rotational and translational degrees of freedom over a particular measurement timescale, leaving only bond vibration within a fixed molecular structure. Reduced freedom of molecular movement results in decreased heat capacity and thermal expansivity in glass relative to the liquid state. In cryoprotectant solutions, the change from liquid to solid properties happens over a ∼10 °C temperature interval centered on a glass transition temperature, typically near −120 °C (±10 °C) for solutions used for vitrification. Loss of freedom to quickly rearrange molecular position causes liquids to depart from thermodynamic equilibrium as they turn into a glass during vitrification. Residual molecular mobility below the glass transition temperature allows glass to very slowly contract, release heat, and decrease entropy during relaxation toward equilibrium. Although diffusion is practically non-existent below the glass transition temperature, small local movements of molecules related to relaxation have consequences for cryobiology. In particular, ice nucleation in supercooled vitrification solutions occurs at remarkable speed until at least 15 °C below the glass transition temperature.     

A concavity property of the viscosity growth curve during alkali gelatinization of rice starch

A qualitative difference between the viscosity–time curves for thermal and strong alkali gelatinization of rice starch was demonstrated using continuous capillary viscometry. During the thermal (60, 70, 75, 80 °C) gelatinization with distilled water, the viscosity growth curves kept a convexity property, in accordance with the past known results. In contrast, the viscosity growth curves for the cold (15, 20 °C) gelatinization with a 0.146 N NaOH solution showed a concavity property in the first half of whole gelatinization process. This result confirmed our previous result having been obtained from batch-type measurement with use of a cone-plate viscometer. On the basis of the first-order reaction hypothesis for gelatinization degree, this novel viscosity growth behavior in cold alkali gelatinization could be described in terms of the mixing rule of viscosity distinct from that had been applied to thermal gelatinization.     

Effect of sodium chloride on the gelatinization of starch: a multimeasurement study.

The effect of sodium chloride on the gelatinization and rheological properties of wheat and potato starches has been studied using differential scanning calorimetry, dynamic mechanical thermal analysis, and electron spin resonance techniques. All samples contained 60% water (w/w wet starch basis) and the salt content ranged from 0 to 16% (g/100 g starch-water). The presence of salt affected the onset (T(o)), peak (T(p)), and end (T(e)) temperatures of gelatinization, gelatinization enthalpy (DeltaH), storage modulus (G'), and rotational mobility coefficient (D(rot)), and the effect differed by salt concentration. 1H-NMR was used in parallel in order to elucidate how salts affect the properties of water in starch suspensions and in aqueous salt solutions according to their position on the Hofmeister series classification. The obtained results suggest that the mechanism of starch gelatinization in salt solutions can be attributed to the effect of solute on water properties and direct polymer-solute interactions. These two effects conflict with one another and result in complex effect patterns depending on the concentration of the salts.     

Measurement of resistant starch content in cooked rice and analysis of gelatinization and retrogradation characteristics

Digestion-resistant starch (RS) has many physiologic functions. The RS content is measured by enzymatically degrading flour samples according to the method of the Association of Official Analytical Chemists. Experiments have been performed with wheat, corn, and other grains, but there are no data for cooked rice grains in the form ingested by humans. Thus, we investigated a method to measure RS that is suitable for cooked rice grains using rice cultivars that are reported to differentially increase postprandial blood glucose in humans. Using a method for cooking individual rice grains and optimized enzyme reaction conditions, we established an RS measurement method. We also found that the amylopectin crystal condition affects the RS content measured using our method.     

Characterization of a crosslinked high amylose starch excipient.

A controlled release excipient based on sodium trimetaphosphate (STMP) crosslinked high amylose starch has been examined by 13C CP/MAS NMR. The dry excipient powder is pressed to a hard tablet whose volume increase in H2O runs parallel to the STMP concentration used. The known polymorph resonances of single helix 'V' starch (hydrated) and double helix 'B' starch (hydrated) both contribute to the spectrum corresponding to the swollen tablet. The wet tablet when loaded with a pharmaceutical agent provides a near zero-order release profile for up to 20 h. The swelling and drug release behaviour is explained in terms of self-assembly of the STMP treated starch nanomolecular particles. These particles are drawn together by "self-assembly" due to formation of amylose double helices as water penetrates the tablet. An optimum level of chemical crosslinking ensures the integrity of the swollen tablet whose sponge-like structure enclosed by a membranous surface is responsible for sustained release.     

Isocyanate crosslinked reactive starch nanoparticles for thermo-responsive conducting applications

Hydrophobic nanoparticles and nanocomposite films of 1,4-hexamethylene diisocyanate (HMDI)-modified starch nanoparticles (SNPs) have been synthesized at ambient temperatures. The platelet-like starch nanocrystals become pseudospherical after modification with HMDI and the size increases or decreases depending on diisocyanate concentration compared to the ungrafted particles as revealed by transmission electron microscopy (TEM) results. The obtained nanocrystals were characterized by means of the FT-IR and X-ray diffraction (XRD) techniques. When compared with the hydrophobic performance of the unmodified starch nanocrystals, that of crosslinked starch nanocrystals significantly increased. X-ray diffraction reveals that the crystalline structure of modified starch nanocrystals was preserved. The resulting hydrophobic starch nanoparticles are versatile precursors to the development of nanocomposites. The polyether-polyurethane crosslinked with SNPs nanocomposite film exhibited thermo-responsive electrical conductivity.     

Pressure-temperature gelatinization phase diagram of starch: An in situ Fourier transform infrared study

The gelatinization of rice starch is reported as a function of temperature and pressure from the changes in the ir spectrum. The diagram that is observed is reminiscent of those obtained for the denaturation of proteins and the phase separation observed from the cloud point for several water soluble synthetic polymers. It is proposed that the reentrant shape of the diagram for starch is not only due to hydrogen bonding but also to the imperfect packing of amylose and amylopectin chains in the starch granule. The influence of pressure and temperature on thermodynamic parameters leading to this diagram is discussed.     

Thermodynamic aspects of DsbD-mediated electron transport

DsbD from Escherichia coli transports electrons from cytoplasmic thioredoxin across the inner membrane to the periplasmic substrate proteins DsbC, DsbG and CcmG. DsbD consists of three domains: a periplasmic N-terminal domain, a central transmembrane domain (tmDsbD) and a periplasmic C-terminal domain. Each domain contains two essential cysteine residues that are required for electron transport. In contrast to the quinone reductase DsbB, HPLC analysis of the methanol/hexane extracts of purified DsbD revealed no presence of quinones, suggesting that the tmDsbD interacts with thioredoxin and the periplasmic C-terminal domain exclusively via disulfide exchange. We also demonstrate that a DsbD variant containing only the redox-active cysteine pair C163 and C285 in tmDsbD, reconstituted into liposomes, has a redox potential of − 0.246 V. The results show that all steps in the DsbD-mediated electron flow are thermodynamically favorable.     

Effect of gelatinization and additives on morphology and thermal behavior of corn starch/PVA blend films

The blend films of ungelatinized and gelatinized starch/polyvinyl alcohol (PVA) were prepared with a solution casting method by the introduction of additives (glycerol/urea) or not. The phase morphologies and thermal behaviors of the blends were carefully analyzed. A droplet phase was observed in the blends containing ungelatinized starch and a laminated phase was observed in the blends containing gelatinized starch. For both ungelatinized and gelatinized starch/PVA blends, the melting temperature (T(m)) (210-230°C) of PVA was detected, and the T(m) of gelatinized starch/PVA blends was higher than that of the ungelatinized starch/PVA blends. Blend films containing 16.8wt% of glycerol or urea exhibited a decreased T(m). The introduction of additives (glycerol or urea) reduced the decomposition onset temperature of the blend films. These various morphologies and thermal behaviors could be attributed to the different hydrogen bonding interaction characteristics between starch and polyvinyl alcohol at different conditions.     

Impact of variability in fishmeal physicochemical properties on the extrusion process,starch gelatinization and pellet durability and hardness

The purpose of this study was to identify physicochemical properties of fishmeal (FM) with impact on specific mechanical energy, starch gelatinization, pellet durability and pellet hardness. The effects of variation in 18 physicochemical properties were assessed based on standardized extrusion, drying and coating conditions. Multivariate models (R² = 0.907–0.970) were established based on partial least squares regression. Increased level of specific mechanical energy was associated with decreased water-holding capacity (P=0.008), decreased cumulative mean particle size (P=0.020), increased value of flow-figure (P<0.001), increased degree of protein hydrolysis (P<0.001) and increased level of the water soluble protein fraction with molecular weight less than 0.2 kDa (P=0.022). Improved degree of starch gelatinization was associated with decreased water-holding capacity (P<0.001) and increased degree of protein hydrolysis (P<0.001). The variation in FM physicochemical properties resulted in a large span in pellet hardness (4.9–133.4 N) covering the range from poor to high physical quality. Improved hardness was associated with decreased water-holding capacity (P=0.069), decreased pH (P=0.001), decreased level of non-soluble protein (P<0.001), increased level of salt (P=0.002), and increased level of the water soluble protein fractions with molecular weight 5–6 kDa (P<0.001), 20–35 kDa (P<0.001) and above 60 kDa (P=0.006). The underlying physical and chemical mechanisms are discussed. The study documents the complexity of FM as a protein ingredient with significant impact on the extrusion process, starch gelatinization and physical pellet quality. The FM specifications normally used on the world commodity market inadequately describe the technical quality of a FM.     

Controlled peeling of the surfaces of starch granules by gelatinization in aqueous dimethyl sulfoxide at selected temperatures

Microscopic examination of starch granules in 90:10 (v/v) Me(2)SO-H(2)O indicated that the granules were slowly being gelatinized from their surfaces. The rate of gelatinization was dependent on two variables: (1) the amount of water in Me(2)SO and (2) the temperature. An increase of water in Me(2)SO and/or an increase in temperature increased the rate of gelatinization and vice versa. Specific ratios of Me(2)SO and H(2)O (85:15-95:5) and temperatures (0-15 degrees C) were found to give controlled sequential peeling/gelatinization of eight kinds of starch granules in 1-12h, with amounts of 10-25% gelatinization per hour. It was observed that the percent of starch granule remaining versus time gave curves that were linear and others that had linear parts separated by one or more abrupt changes. No two starches had a similar gelatinization curve for the same two conditions of the amount of water and the temperature. It is hypothesized that these curves reflect different structural characteristics for the individual kinds of starch granules.