Protective immunities induced by porins from mutant strains of Salmonella typhimurium

The protective immunity against Salmonella typhimurium-infection in mice immunized with porins from mutant strains of S. typhimurium was studied. A high level of protection against S. typhimurium infection was achieved in mice immunized with native porins from S. typhimurium LT2 (wild-type strain) but not from S. typhimurium SH6017, SH6260, or SH5551 (mutant strains), which produce 34K, 35K, or 36K porin, respectively. Moreover, when mice were immunized with mixtures of 34K, 35K, and 36K porins (34K + 35K, 35K + 36K, 34K + 36K, or 34K + 35K + 36K porin) or LT2 porin heated at 100 C for 2 min in 2% SDS (heat-denatured LT2 porin), the degree of protective immunities in the mice was very much lower than that in the mice immunized with the native LT2 porin. However, antisera raised against these porins showed no significant differences of the antibody titer against LT2 porin or LT2 whole cells. On the other hand, mice immunized with the native LT2 porin--but not 34K, 35K, 36K, 34K + 35K + 36K, and the heat-denatured LT2 porins--exhibited significant levels of delayed-type hypersensitivity reaction and interleukin-2 production when they were elicited with whole cells of S. typhimurium LT2. These observations suggested that the high level of protection induced by the native LT2 porin immunization was dependent on the induction of cell-mediated immunity.     

Ultrastructure of the outer membrane of Salmonella typhimurium bacteriocin-resistant mutants deficient in the 33K protein.

Outer membrane mutants of Salmonella typhimurium deficient in one, two, or three of the 33,000-dalton (33K), 34K, and 36K outer membrane proteins (7) were studied by using thin sectioning and freeze-fracturing electron microscopy techniques. The outer concave fracture face of all mutants deficient in the 33K protein had numerous particleless patches. In contrast to all previously examined 34K to 36K-deficient mutants, the 33K-deficient mutants showed marked heterogeneity in the size and distribution of such "empty" patches between cells of a culture. One mutant was deficient in both the 33K and the 34K to 36K "porin" protein complex; its outer membrane had very large particleless smooth areas. It is concluded that the 33K protein on one hand and the porin on the other are both able to form intramembraneous particles.     

The distribution of Ia antigens on the surfaces of lymphocytes.

The distribution of Ia antigens was studied on murine spleen lymphocytes by an ultrastructural technique employing deep freeze-etched replicas. Ia antigens were labeled on cells from appropriate congenic and recombinant strains of mice by incubating the cells with FITC-conjugated anti-Iak antibody, followed by ferritin-coupled Fab anti-FITC. Ia antigens were detected predominantly on immunoglobulin (Ig)-bearing B lymphocytes. Antigens coded for by the entire Ik region were present on the surfaces of 95% of the positive cells (from B10.BR mice) in densely packed microclusters. Ia specificities coded for by the I-A and I-C subregions (on 4R and B10.HTT mice) exhibited a more variable pattern, with 30 to 35% of the labeled cells having sparsely distributed Ia antigens in relatively discrete microclusters. Binding of anti-Iak antibody at 37 degrees C led to patch formation but not to capping. Modulation of surface Ig left Ia antigens diffusely distributed on the cell surface, indicating that these two membrane proteins are independent molecules.     

Determinants of OmpF porin antigenicity and structure.

Sixty-six murine hybridomas raised to Escherichia coli B/r porin were used to identify and differentiate the epitopes of this outer membrane protein. Anti-porin monoclonal antibodies (mAb) were raised against outer membrane fragments, purified native trimeric porin (trimer), and purified sodium dodecyl sulfate-denatured monomeric porin (monomer). Immunochemical and flow cytometric methods identified five distinct cell surface-exposed determinants on OmpF. The peptide composition of porin epitopes was determined by analysis of mAb reactivity with cyanogen bromide-generated peptide fragments. Four of 43 anti-monomer mAb reacted with surface exposed sites on OmpF, defining epitopes that consist of residues within CNBr peptides d2, d3, and B. The anti-porin mAb panel was also used to evaluate changes in porin antigenic structure in strains with short ompF deletions. Flow cytometric experiments indicated that despite changes in porin permeability, little if any alteration of surface epitopes occurred in these strains. Western immunoblot analysis of the mutant porins showed loss of reactivity with numerous mAb, which was caused by changes in three spatially distinct epitopes at residues 108-111, 118-123, and 124-129. Our findings indicate that in these ompF mutants the residues responsible for altering porin permeability are not exposed on the cell surface, but are buried within the tertiary structure of the protein. One of these regions, which is apparently involved in the determination of channel permeability characteristics, is conserved among 15 of 16 different porin molecules which were screened with the anti-OmpF mAb panel.     

Identification of porin-like polypeptide(s) in the boundary membrane of oilseed glyoxysomes

A 36-kDa polypeptide of unknown function was identified by us in the boundary membrane fraction of cucumber seedling glyoxysomes. Evidence is presented in this study that this 36-kDa polypeptide is a glyoxysomal membrane porin. A sequence of 24 amino acid residues derived from a CNBr-cleaved fragment of the 36-kDa polypeptide revealed 72% to 95% identities with sequences in mitochondrial or non-green plastid porins of several different plant species. Immunological evidence indicated that the 36-kDa (and possibly a 34-kDa polypeptide) was a porin(s). Antiserum raised against a potato tuber mitochondrial porin recognized on immunoblots 34-kDa and 36-kDa polypeptides in detergent-solubilized membrane fractions of cucumber seedling glyoxysomes and mitochondria, and in similar glyoxysomal fractions of cotton, castor bean, and sunflower seedlings. The 36-kDa polypeptide seems to be a constitutive component because it was detected also in membrane protein fractions derived from cucumber leaf-type peroxisomes. Compelling evidence that one or both of these polypeptides were authentic glyoxysomal membrane porins was obtained from electron microscopic immunogold analyses. Antiporin IgGs recognized antigen(s) in outer membranes of glyoxysomes and mitochondria. Taken together, the data indicate that membranes of cucumber (and other oilseed) glyoxysomes, leaf-type peroxisomes, and mitochondria possess similar molecular mass porin polypeptide(s) (34 and 36 kDa) with overlapping immunological and amino acid sequence similarities.     

Outer membrane porins are important in maintenance of the surface structure of Escherichia coli cells.

Escherichia coli cells lacking the OmpF and OmpC proteins, porin proteins of the outer membrane, are often unstable and easily revert to strains which either have regained one or both of these proteins or contain a new outer membrane protein. The structural importance of porin proteins in the cell surface was studied in the present work. Tris-hydrochloride buffer at a concentration of 120 mM caused deformation of the cell surface of a strain lacking these porins; the undulated appearance of the negatively stained cell surface changed to a smooth and expanded form. The Tris-induced deformation was seldom observed with either the wild-type strain or a pseudorevertant that possessed the OmpF protein. The role of the OmpF protein in stabilizing the cell surface against Tris treatment could be slightly taken over by the LamB protein, which shares a number of unique properties with the former proteins. The deformation of the cell surface by Tris-hydrochloride buffer was accompanied by a loss of viability, the lethal damage being especially significant when the cells lacked porins. Upon induction with maltose, cells with the undulated appearance could absorb lambda phages, whereas the deformed cells could not. These results suggest that the instability of cells lacking porins is primarily due to a structural defect of the outer membrane.     

A novel OmpY porin from Yersinia pseudotuberculosis: structure, channel-forming activity and trimer thermal stability

A novel OmpY porin was predicted based on the Yersinia pseudotuberculosis genome analysis. Whereas it has the different genomic annotation such as "outer membrane protein N" (ABS46310.1) in str. IP 31758 or "outer membrane protein C2, porin" (YP_070481.1) in str. IP32953, it might be warranted to rename the OmpN/OmpC2 to OmpY, "outer membrane protein Y", where letter "Y" pertained to Yersinia. Both phylogenetic analysis and genomic localization clearly support that the OmpY porin belongs to a new group of general bacterial porins. The recombinant OmpY protein with its signal sequence was overexpressed in porin-deficient Escherichia coli strain. The mature rOmpY was shown to insert into outer membrane as a trimer. The OmpY porin, isolated from the outer membrane, was studied employing spectroscopic, electrophoretic and bilayer lipid membranes techniques. The far UV CD spectrum of rOmpY was essentially identical to that of Y. pseudotuberculosis OmpF. The near UV CD spectrum of rOmpY was weaker and smoother than that of OmpF. The rOmpY single-channel conductance was 180 ± 20 pS in 0.1 M NaCl and was lower than that of the OmpF porin. As was shown by electrophoretic and bilayer lipid membrane experiments, the rOmpY trimers were less thermostable than the OmpF trimers. The porins differed in the trimer-monomer transition temperature by about 20°C. The three-dimensional structural models of the Y. pseudotuberculosis OmpY and OmpF trimers were generated and the intra- and intermonomeric interactions stabilizing the porins were investigated. The difference in the thermal stability of OmpY and OmpF trimers was established to correlate with the difference in intermonomeric polar contacts.     

Cell surface growth in Escherichia coli: distribution of matrix protein.

Autoradiography of cell envelope "ghosts" from Escherichia coli was used to demonstrate that newly synthesized molecules of "matrix" protein are inserted at random locations over the entire surface of the outer membrane and that, once inserted, these molecules are not thereafter conserved in any fixed spatial location.     

Antigenic sites on porin of Haemophilus influenzae type b: mapping with synthetic peptides and evaluation of structure predictions.

The major surface-located protein in the outer membrane of Haemophilus influenzae type b (Hib) is porin, molecular mass, 38 kDa, 341 amino acids. To define precisely the molecular reactivities of nine mouse monoclonal antibodies (MAbs) against Hib porin, overlapping hexapeptides corresponding to the entire sequence of porin were synthesized. The epitopes recognized by the MAbs were mapped by enzyme-linked immunosorbent assay to stretches of 6 to 11 amino acids. Antigenic sites between amino acids 112 and 126, 148 and 153, 162 and 172, and 318 and 325 were identified. The antigenic sites between amino acids 162 and 172 and between amino acids 318 and 325 were determined by flow cytometry to be on the bacterial cell surface. Four MAbs, POR.2, POR.3, POR.4, and POR.5, that react with amino acids 162 to 172 were able to discriminate among porins from the three major outer membrane protein subtypes of Hib, i.e., 1H, 2L, and 6U. A model for the topological organization of Hib porin was created by calculating the hydrophobicity, amphiphilicity, and turn propensity in its amino acid sequence. Determination of the molecular reactivities of the anti-Hib porin MAbs provided substantive evidence for the orientation of selected regions of porin in the outer membrane of Hib.     

A model of maltodextrin transport through the sugar-specific porin, LamB, based on deletion analysis.

LamB facilitates the uptake of maltose and maltodextrins across the bacterial outer membrane and acts as a general porin for small molecules. Using directed deletion mutagenesis we removed several regions of the LamB polypeptide and identified a polypeptide loop that both constricts the maltoporin channel and binds maltodextrins. In conjunction with a second sugar binding site that we identified at the rim of the channel, these data clarify, for the first time, the mechanism of transport through a substrate-specific porin. Furthermore, unlike the transverse loops of general porins, which originate from a central location in their primary structure, the loop that regulates LamB permeability originates from a C-terminal site. Thus LamB represents a second distinct class of porins in the bacterial outer membrane that is differently organized and separately evolved from OmpF-type, general porins.     

Native and chemically modified porin channels from Salmonella typhi Ty2 in planar lipid bilayers

Native porins, from Salmonella typhi Ty2 outer membrane, and porins alkylated with pyridoxal phosphate (Plp) were studied in planar lipid bilayers. The conductance of bilayers exposed to native or chemically modified porins increases in discrete jumps. Conductance histograms for native porins displayed two major peaks at 1.7 and 6.7 nS (in 0.5 M KCl). On the other hand, Plp-treated porins exhibited a single major peak at 1 nS. The relation between bilayer conductance and native porin concentration was linear. However, this relation became logarithmic in the presence of modified porins. The results support the notion that alkaline reduction of S. typhi Ty2 porins with Plp dissociates porin channel trimers in a reversible fashion.     

Effects of pH on bacterial porin function.

Porin is a trimeric channel-forming protein in the outer membrane of Gram-negative bacteria. Functions of the porins OmpF, OmpC, and PhoE from Escherichia coli K12 were analyzed at various pHs. Preliminary results from bilayer lipid membrane and liposome swelling assays indicated that in vitro porin has at least two open-channel configurations with a small and a large size. The small channels were stabilized at low pH while the larger channels were detected under basic conditions. The size switch occurred over a very narrow range near neutral pH, and the two major open-channel configurations responded differently to variations in voltage. The presence of two or more pH-dependent substates of porin could explain the variability in pore diameter measured by others and suggests a more dynamic role for porin in the cell.     

Transmembrane permeability channels in vesicles reconstituted from single species of porins from Salmonella typhimurium.

Aggregates of the "major" outer membrane proteins, "porins," of Salmonella typhimurium form diffusion channels in reconstituted vesicle membranes. The aggregate consists of three species of porins with apparent molecular weights of 34,000, 35,000, and 36,000 when active aggregates are subjected to sodium dodecyl sulfate-acrylamide gel electrophoresis after heating in the presence of sodium dodecyl sulfate (Nakae, J. Biol. Chem. 251:2176-2178, 1976). Single species of porins were isolated by solubilization of membranes and subsequent gel filtration in the presence of sodium dodecyl sulfate from the mutant strains of Salmonella typhimurium that produced only single species of porin. The single species of porins of either 34,000, 35,000, or 36,000 daltons formed diffusion channels when assayed for sucrose permeability in the vesicle membranes reconstituted from porins, phospholipids, and lipopolysaccharides. The exclusion limits of the pores made of single species of porins were not distinguishable from each other and from the exclusion limits of the pores made of the porin aggregates from the wild-type strain, when the permeability of vesicle membranes to radioactive di-, tri-, and tetrasaccharides and to various sizes of radioactive polyethylene glycol was determined. Porin-deficient mutants produced residual amounts of porin amounting to 1 to 5% that produced by the parent strain. This residual porin made diffusion channels when the isolated porins were incorporated into the vesicle membrane and assayed for permeability of saccharides.     

High‐resolution architecture of the outer membrane of the Gram‐negative bacteria Roseobacter denitrificans

The outer membrane of Gram‐negative bacteria protects the cell against bactericidal substances. Passage of nutrients and waste is assured by outer membrane porins, beta‐barrel transmembrane channels. While atomic structures of several porins have been solved, so far little is known on the supramolecular structure of the outer membrane. Here we present the first high‐resolution view of a bacterial outer membrane gently purified maintaining remnants of peptidoglycan on the perisplasmic surface. Atomic force microscope images of outer membrane fragments of the size of ～50% of the bacterial envelope revealed that outer membrane porins are by far more densely packed than previously assumed. Indeed the outer membrane is a molecular sieve rather than a membrane. Porins cover ～70% of the membrane surface and form locally regular lattices. The potential role of exposed aromatic residues in the formation of the supramolecular assembly is discussed. Finally, we present first structural data of the outer membrane porin from the marine Gram‐negative bacteria Roseobacter denitrificans, and we perform a sequence alignment with porins of known structure.     

Crystal structure of Omp32, the anion-selective porin from Comamonas acidovorans, in complex with a periplasmic peptide at 2.1 A resolution

BACKGROUND: Porins provide diffusion channels for salts and small organic molecules in the outer membrane of bacteria. In OmpF from Escherichia coli and related porins, an electrostatic field across the channel and a potential, originating from a surplus of negative charges, create moderate cation selectivity. Here, we investigate the strongly anion-selective porin Omp32 from Comamonas acidovorans, which is closely homologous to the porins of pathogenic Bordetella and Neisseria species. RESULTS: The crystal structure of Omp32 was determined to a resolution of 2.1 A using single isomorphous replacement with anomalous scattering (SIRAS). The porin consists of a 16-stranded beta barrel with eight external loops and seven periplasmic turns. Loops 3 and 8, together with a protrusion located within beta-strand 2, narrow the cross-section of the pore considerably. Arginine residues create a charge filter in the constriction zone and a positive surface potential at the external and periplasmic faces. One sulfate ion was bound to Arg38 in the channel constriction zone. A peptide of 5.8 kDa appeared bound to Omp32 in a 1:1 stoichiometry on the periplasmic side close to the symmetry axis of the trimer. Eight amino acids of this peptide could be identified, revealing specific interactions with beta-strand 1 of the porin. CONCLUSIONS: The Omp32 structure explains the strong anion selectivity of this porin. Selectivity is conferred by a positive potential, which is not attenuated by negative charges inside the channel, and by an extremely narrow constriction zone. Moreover, Omp32 represents the anchor molecule for a peptide which is homologous to proteins that link the outer membrane to the cell wall peptidoglycan.     

Characterization of a novel porin protein from Moraxella catarrhalis and identification of an immunodominant surface loop

Moraxella catarrhalis is a gram-negative bacterium that is mainly responsible for respiratory tract infections. In this study we report a novel outer membrane protein (OMP), designated M35, with a molecular mass of 36.1 kDa. This protein was structurally homologous to classic gram-negative porins, such as OMP C from Escherichia coli and OMP K36 from Klebsiella pneumoniae, with a predicted structure of 8 surface loops and 16 antiparallel beta-sheets. The DNA sequences of the genes from 18 diverse clinical isolates showed that the gene was highly conserved (99.6 to 100% of nucleotides), with only one isolate (ID78LN266) having base variations that resulted in amino acid substitutions. Electrophoresis and analysis of recognition of the protein using mouse anti-M35 sera showed that M35 was expressed on the bacterial surface and constitutively expressed across M. catarrhalis isolates, with only ID78LN266 showing poor antibody recognition. Our results showed that the single amino acid mutation in loop 3 significantly affected antibody recognition, indicating that loop 3 appeared to contain an immunodominant B-cell epitope. The antibody specificity to loop 3 may be a potential mechanism for evasion of host immune responses targeted to M35, since loop 3 should theoretically orientate into the porin channel. Thus, M35 is a highly conserved, surface-expressed protein that is of significance for its potential functional role as an M. catarrhalis porin and is of interest as a vaccine candidate.     

Borrelia burgdorferi BBA74, a periplasmic protein associated with the outer membrane, lacks porin-like properties

The outer membrane of Borrelia burgdorferi, the causative agent of Lyme disease, contains very few integral membrane proteins, in contrast to other gram-negative bacteria. BBA74, a Borrelia burgdorferi plasmid-encoded protein, was proposed to be an integral outer membrane protein with putative porin function and designated as a 28-kDa outer membrane-spanning porin (Oms28). In this study, the biophysical properties of BBA74 and its subcellular localization were investigated. BBA74 is posttranslationally modified by signal peptidase I cleavage to a mature 25-kDa protein. The secondary structure of BBA74 as determined by circular dichroism spectroscopy consists of at least 78% alpha-helix with little beta-sheet structure. BBA74 in intact B. burgdorferi cells was insensitive to proteinase K digestion, and indirect immunofluorescence microscopy showed that BBA74 was not exposed on the cell surface. Triton X-114 extraction of outer membrane vesicle preparations indicated that BBA74 is not an integral membrane protein. Taken together, the data indicate that BBA74 is a periplasmic, outer membrane-associated protein that lacks properties typically associated with porins.     

Structure of Escherichia coli OmpF porin from lipidic mesophase

Outer membrane protein F, a major component of the Escherichia coli outer membrane, was crystallized for the first time in lipidic mesophase of monoolein in novel space groups, P1 and H32. Due to ease of its purification and crystallization OmpF can be used as a benchmark protein for establishing membrane protein crystallization in meso, as a "membrane lyzozyme". The packing of porin trimers in the crystals of space group H32 is similar to natural outer membranes, providing the first high-resolution insight into the close to native packing of OmpF. Surprisingly, interaction between trimers is mediated exclusively by lipids, without direct protein-protein contacts. Multiple ordered lipids are observed and many of them occupy identical positions independently of the space group, identifying preferential interaction sites of lipid acyl chains. Presence of ordered aliphatic chains close to a positively charged area on the porin surface suggests a position for a lipopolysaccharide binding site on the surface of the major E. coli porins.     

Conformational analysis of the Campylobacter jejuni porin.

The major outer membrane protein (MOMP) of Campylobacter jejuni was purified to homogeneity by selective solubilization and fast protein liquid chromatography. The amino acid composition of the MOMP indicates the presence of cysteine residues. The amino-terminal sequence, determined over 31 residues, shows no significant homology with any other porin from gram-negative bacteria except in a discrete region. Immunocross-reactivity between Escherichia coli OmpC and the MOMP was analyzed, and a common antigenic site between these two porins was identified with an anti-peptide antibody. From circular dichroism and immunological investigations, the existence of a stable folded monomer, containing a high level of beta-sheet secondary structure, is evident. Conformational analyses show the presence of a native trimeric state generated by association of the three folded monomers; the stability of this trimer is reduced compared with that of E. coli porins. This study clearly reveals that the C. jejuni MOMP is related to the family of trimeric bacterial porins.     

Mitochondrial porin of Neurospora crassa: cDNA cloning, in vitro expression and import into mitochondria.

cDNA encoding porin of Neurospora crassa, the major protein component of the outer mitochondrial membrane, was isolated and the nucleotide sequence was determined. The deduced protein sequence consists of 283 amino acids (29,979 daltons) and shows sequence homology of around 43% to yeast porin; however, no significant homology to bacterial porins was apparent. According to secondary structure predictions, mitochondrial porin consists mainly of membrane-spanning sided beta-sheets. Porin was efficiently synthesized in vitro from the cDNA; this allowed us to study in detail its import into mitochondria. Thereby, three characteristics of import were defined: (i) import depended on the presence of nucleoside triphosphates; (ii) involvement of a proteinaceous receptor-like component on the surface of the mitochondria was demonstrated; (iii) insertion into the outer membrane was resolved into at least two distinct steps: specific binding to high-affinity sites and subsequent assembly to the mature form.