Enhancement of polysaccharides production in <Emphasis Type="Italic">Ganoderma lucidum</Emphasis> by the addition of ethyl acetate extracts from <Emphasis Type="Italic">Eupolyphaga sinensis</Emphasis> and <Emphasis Type="Italic">Catharsius molossus</Emphasis>

To screen stimulators from Chinese medicinal insects for mycelial growth and polysaccharides production of Ganoderma lucidum, G. lucidum was inoculated into the media with and without supplementation of medicinal insect extracts. The ethyl acetate extract of Eupolyphaga sinensis at 55 mg l⁻¹ lead to significant increase in both biomass and intracellular polysaccharides (IPS) concentration from 8.53 ± 0.41 to 14.16 ± 0.43 and 1.28 ± 0.09 to 2.13 ± 0.11 g l⁻¹, respectively. In addition, the ethyl acetate extract of Catharsius molossus at 55 mg l⁻¹ significantly enhanced extracellular polysaccharides (EPS) production; the EPS yield increased from 350.9 ± 14.1 to 475.1 ± 15.3 mg l⁻¹. There were no new components in the two types of polysaccharides obtained by the addition of the insect extracts.     

Continuous production of isopropanol and butanol using <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> DSM 6423

Clostridium beijerinckii DSM 6423 was studied using different continuous production methods to give maximum and stable production of isopropanol and n-butanol. In a single-stage continuous culture, when wood pulp was added as a cell holding material, we could increase the solvent productivity from 0.47 to 5.52 g L⁻¹ h⁻¹ with the yield of 54% from glucose. The overall solvent concentration of 7.51 g L⁻¹ (39.4% isopropanol and 60.6% n-butanol) with the maximum solvent productivity of 0.84 g L⁻¹ h⁻¹ was obtained with two-stage continuous culture. We were able to run the process for more than 48 overall retention times without losing the ability to produce solvents.     

Efficient separation and purification of allophycocyanin from <Emphasis Type="Italic">Spirulina</Emphasis> (<Emphasis Type="Italic">Arthrospira</Emphasis>) <Emphasis Type="Italic">platensis</Emphasis>

Allophycocyanin (APC) is a minor component of phycobiliproteins in cyanobacteria and red algae. This paper describes a simple and inexpensive extracting method for isolating APC from Spirulina (Arthrospira) platensis with high efficiency. The crude phycobiliprotein extract was pretreated by ammonium sulfate fractionation. Then, by adding hydroxylapatite into crude phycobiliprotein extract dissolved in 20 mM phosphate buffer (pH 7.0), APC was selectively adsorbed by hydroxylapatite but C-phycocyanin (C-PC) was not. The hydroxylapatite was collected and APC was extracted from the crude phycobiliprotein extract. Then, the enriched APC was washed off from the hydroxylapatite using 100 mM phosphate buffer (pH 7.0). In this simple extracting method it was easy to remove C-PC and isolate APC in large amounts. The absorbance ratio A ₆₅₀/A ₂₈₀ of extracted APC reached 2.0. The recovery yield was 70%, representing 4.61 mg · g⁻¹ wet weight. The extracted APC could be further purified by a simple anion-exchange chromatography with a pH gradient from 5.6 to 4.0. The absorbance ratio A ₆₅₀/A ₂₈₀ of the purified APC reached 5.0, and the overall recovery yield was 43%, representing 2.83 mg · g⁻¹ wet weight. Its purity was confirmed by native polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate-PAGE.     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

Large-scale production of tannase using the yeast <Emphasis Type="Italic">Arxula adeninivorans</Emphasis>

Tannase (tannin acyl hydrolase, EC 3.1.1.20) hydrolyses the ester and depside bonds of gallotannins and gallic acid esters and is an important industrial enzyme. In the present study, transgenic Arxula adeninivorans strains were optimised for tannase production. Various plasmids carrying one or two expression modules for constitutive expression of tannase were constructed. Transformant strains that overexpress the ATAN1 gene from the strong A. adeninivorans TEF1 promoter produce levels of up to 1,642 U L⁻¹ when grown in glucose medium in shake flasks. The effect of fed-batch fermentation on tannase productivity was then investigated in detail. Under these conditions, a transgenic strain containing one ATAN1 expression module produced 51,900 U of tannase activity per litre after 142 h of fermentation at a dry cell weight of 162 g L⁻¹. The highest yield obtained from a transgenic strain with two ATAN1 expression modules was 31,300 U after 232 h at a dry cell weight of 104 g L⁻¹. Interestingly, the maximum achieved yield coefficients [Y(P/X)] for the two strains were essentially identical.     

Alginate production and <Emphasis Type="Italic">alg8</Emphasis> gene expression by <Emphasis Type="Italic">Azotobacter vinelandii</Emphasis> in continuous cultures

Alginates are polysaccharides that are used as thickening agents, stabilizers, and emulsifiers in various industries. These biopolymers are produced by fermentation with a limited understanding of the processes occurring at the cellular level. The objective of this study was to evaluate the effects of agitation rate and inlet sucrose concentrations (ISC) on alginate production and the expression of the genes encoding for alginate-lyases (algL) and the catalytic subunit of the alginate polymerase complex (alg8) in chemostat cultures of Azotobacter vinelandii ATCC 9046. Increased alginate production (2.4 g l⁻¹) and a higher specific alginate production rate (0.1 g g⁻¹ h⁻¹) were obtained at an ISC of 15 g l⁻¹. Carbon recovery of about 100% was obtained at an ISC of 10 g l⁻¹, whereas it was close to 50% at higher ISCs, suggesting that cells growing at lower sucrose feed rates utilize the carbon source more efficiently. In each of the steady states evaluated, an increase in algL gene expression was not related to a decrease in alginate molecular weight, whereas an increase in the molecular weight of alginate was linked to higher alg8 gene expression, demonstrating a relationship between the alg8 gene and alginate polymerization in A. vinelandii for the first time. The results obtained provide a possible explanation for changes observed in the molecular weight of alginate synthesized and this knowledge can be used to build a recombinant strain able to overexpress alg8 in order to produce alginates with higher molecular weights.     

Bioreduction of Cu(II) by Cell-Free Copper Reductase from a Copper Resistant <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. NA

Environmental copper contamination is a serious human health problem. Copper reductase is produced by microorganisms to facilitate copper uptake by ATPases into the cells increasing copper biosorption. This study assessed the reduction of Cu(II) by cell-free extracts of a highly copper-resistant bacterium, Pseudomonas sp. strain NA, isolated from vineyard soil contaminated with copper. Both intact cells and cell-free extract of Pseudomonas sp. strain NA displayed substantial reduction of Cu(II). Intact cells reduced more then 80 mg L⁻¹ of Cu(II) from medium amended with 200 mg L⁻¹ of copper after 24 h of incubation. Cell-free extract of the isolate reduced more than 65% of the Cu(II) at initial copper concentration of 200 mg L⁻¹ after 24 h. Soluble protein production was high at 72 h of incubation at 100 mg L⁻¹ of copper, with more then 60 μg L⁻¹ of total soluble protein in cell-free extract recorded. Cu(II) reduction by isolate NA was increased when copper concentration increased for both intact cells and cell-free extract. Results indicate that Pseudomonas sp. strain NA produces copper reductase enzyme as the key mechanism of copper biotransformation.     

Insecticide-tolerant and plant growth promoting <Emphasis Type="Italic">Bradyrhizobium</Emphasis> sp. (<Emphasis Type="Italic">vigna</Emphasis>) improves the growth and yield of greengram [<Emphasis Type="Italic">Vigna radiata</Emphasis> (L.) Wilczek] in insecticide-stressed soils

This study was designed to identify rhizobial strains specific to greengram expressing higher tolerance against insecticides, fipronil and pyriproxyfen, and synthesizing plant growth regulators even amid insecticide-stress. Of the 50 bradyrhizobial isolates, the Bradyrhizobium sp. strain MRM6 showed tolerance up to 1,600 μg mL⁻¹ against each of fipronil and pyriproxyfen. The tolerant Bradyrhizobium sp. (vigna) produced plant growth promoting substances in substantial amounts, both in the presence and absence of insecticides. The strain MRM6 was further used to investigate its impact on greengram grown in soils treated with 200 (the recommended dose), 400 and 600 μg kg⁻¹ soil of fipronil and 1,300 (the recommended dose), 2,600 and 3,900 μg kg⁻¹ soil of pyriproxyfen. Fipronil at 600 μg kg⁻¹ soils and pyriproxyfen at 3,900 μg kg⁻¹ soils had greatest toxic effects and decreased plant biomass, symbiotic efficiency, nutrient uptake and seed yield of greengram plants. The Bradyrhizobium sp. (vigna) inoculant when used with fipronil and pyriproxyfen significantly increased the measured parameters compared to the plants grown in soils treated solely with the same concentration of each insecticide. This study inferred that the Bradyrhizobium sp. (vigna) strain MRM6 may be exploited as bio-inoculant to increase the productivity of greengram exposed to insecticide-stressed soils.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Drought,warming and soil fertilization effects on leaf volatile terpene concentrations in <Emphasis Type="Italic">Pinus halepensis</Emphasis> and <Emphasis Type="Italic">Quercus ilex</Emphasis>

The changes in foliar concentrations of volatile terpenes in response to water stress, fertilization and temperature were analyzed in Pinus halepensis and Quercus ilex. The most abundant terpenes found in both species were α-pinene and Δ³-carene. β-Pinene and myrcene were also abundant in both species. P. halepensis concentrations were much greater than those of Q. ilex in agreement with the lack of storage in the latter species (15205.60 ± 1140.04 vs. 0.54 ± 0.08 μg g⁻¹ [d.m.]). The drought treatment (reduction to 1/3 of full watering) significantly increased the total terpene concentrations in both species (54% in P. halepensis and 119% in Q. ilex). The fertilization treatment (addition of either 250 kg N ha⁻¹ or 250 kg P ha⁻¹ or both) had no significant effects on terpene foliar concentrations. The terpene concentrations increased from 0.25 μg g⁻¹ [d.m.] at 30°C to 0.70 μg g⁻¹ [d.m.] at 40°C in Q. ilex (the non-storing species) and from 2,240 μg g⁻¹ [d.m.] at 30°C to 15,621 μg g⁻¹ [d.m.] at 40°C in P. halepensis (the storing species). Both species presented negative relationship between terpene concentrations and relative water contents (RWC). The results of this study show that higher terpene concentrations can be expected in the warmer and drier conditions predicted for the next decades in the Mediterranean region.     

Characterization of Cadmium-Binding Ligands from Roots of <Emphasis Type="Italic">Echinochloa crusgalli</Emphasis> var. <Emphasis Type="Italic">frumentacea</Emphasis>

Herbaceous Echinochloa crusgalli var. frumentacea is highly resistant to a wide range of heavy metal concentrations. However, its detoxification mechanism has not been reported yet. We exposed plants to 100 μM CdCl₂ for 7 days then examined cadmium accumulation and its subcellular distribution in binding to ligands. Cd concentration increased over the exposure period to a saturation point at day 5 when its level reached 1,732.41 μg g⁻¹ dry weight, an amount about 820 times greater than that found in the control. In the roots, most Cd was distributed in the insoluble fraction, perhaps because of an absorption mechanism at the root surface. Our profile for distribution revealed two Cd-binding ligand peaks: a high molecular weight of 60 kDa and a 2.5-kDa Cd-binding ligand. The latter increased with time and had a typical phytochelatin (PC) amino acid composition of predominantly cysteine, glutamate, and glycine (16.5%, 16.6%, and 11.9%, respectively). The ratio of glutamate/cysteine/glycine was 1.4:1.4:1.0, which is similar to that for other typical PCs.     

Photoautotrophic Production of Lipids by Some <Emphasis Type="Italic">Chlorella</Emphasis> Strains

The microalgae Chlorella protothecoides UTEX 25, Chlorella sp. TISTR 8991, and Chlorella sp. TISTR 8990 were compared for use in the production of biomass and lipids under photoautotrophic conditions. Chlorella sp. TISTR 8990 was shown to be potentially suitable for lipid production at 30°C in a culture medium that contained only inorganic salts. For Chlorella sp. TISTR 8990 in optimal conditions in a stirred tank photobioreactor, the lipid productivity was 2.3 mg L⁻¹ h⁻¹ and after 14 days the biomass contained more than 30% lipids by dry weight. To attain this, the nitrogen was provided as KNO₃ at an initial concentration of 2.05 g L⁻¹ and chelated ferric iron was added at a concentration of 1.2 × 10⁻⁵ mol L⁻¹ on the ninth day. Under the same conditions in culture tubes (36 mm outer diameter), the biomass productivity was 2.8-fold greater than in the photobioreactor (0.125 m in diameter), but the lipid productivity was only 1.2-fold higher. Thus, the average low-light level in the photobioreactor actually increased the biomass specific lipid production compared to the culture tubes. A light-limited growth model closely agreed with the experimental profiles of biomass production, nitrogen consumption, and lipid production in the photobioreactor.     

Role of two contrasting ecosystem engineers (<Emphasis Type="Italic">Zostera noltii</Emphasis> and <Emphasis Type="Italic">Cymodocea nodosa</Emphasis>) on the food intake rate of <Emphasis Type="Italic">Cerastoderma edule</Emphasis>

Seagrasses are well known ecosystem engineers that can significantly influence local hydrodynamics and the abundance and biodiversity of macrobenthic organisms. This study focuses on the potential role of the seagrass canopy structure in altering the abundance of filter-feeding organisms by modifying the hydrodynamic driven food supply. We quantified the effect of two ecosystem engineers with contrasting canopy properties (i.e. Zostera noltii and Cymodocea nodosa) on the food intake rate of a suspension-feeding bivalve Cerastoderma edule living in these seagrass meadows. Field experiments were carried out in two seagrass beds (Z. noltii and C. nodosa) and bare sediment, located on sandflat characterised by a relatively high hydrodynamic energy from waves and currents. Results demonstrated that the filter-feeding rate was almost twofold increased when C. edule was inhabiting Z. noltii meadows (1.10 ± 0.24 μg Chl g Fresh Weight⁻¹) when compared to cockles living on the bare sediment (0.65 ± 0.14 μg Chl g FW⁻¹). Intermediate values were found within C. nodosa canopy (0.97 ± 0.24 μg Chl g FW⁻¹), but filter feeding rate showed no significant differences with values for Z. noltii meadows. There were no apparent correlations between canopy properties and filter-feeding rates. Our results imply that food refreshment within the seagrass canopies was enough to avoid food depletion. We therefore expect that the ameliorated environmental conditions within vegetated areas (i.e. lower hydrodynamic conditions, higher sediment stability, lower predation pressure…) in combination with sufficient food supply to prevent depletion within both canopies are the main factors underlying our observations.     

Migratory history and habitat use by New Zealand freshwater eels <Emphasis Type="Italic">Anguilla dieffenbachii</Emphasis> and <Emphasis Type="Italic">A. australis</Emphasis>, as revealed by otolith microchemistry

 The migratory history of Anguilla dieffenbachii and A. australis, collected from a coastal lake of New Zealand, was examined using analysis of strontium (Sr) and calcium (Ca) concentrations. Line analysis of Sr : Ca ratios along the life history transect of each otolith showed a peak (Ca. 16–20 × 10⁻³) between the core and elver mark, which corresponded to the period of their leptocephalus and early glass eel stages in the ocean. The mean Sr : Ca ratios from the elver mark to the otolith edge indicated that eels had different migratory histories, which included freshwater residency in some eels (average Sr : Ca ratios, 1.7 × 10⁻³–2.4 × 10⁻³) but not in others (average Sr : Ca ratios, 3.1 × 10⁻³–6.5 × 10⁻³). These findings suggest that New Zealand freshwater eels have a flexible migration strategy and an ability to adapt to various habitats and salinities. Received: November 25, 2002 / Revised: January 17, 2003 / Accepted: January 17, 2003     

Optimization of fermentation medium for triterpenoid production from <Emphasis Type="Italic">Antrodia camphorata</Emphasis> ATCC 200183 using artificial intelligence-based techniques

In this study, alteration in morphology of submergedly cultured Antrodia camphorata ATCC 200183 including arthroconidia, mycelia, external and internal structures of pellets was investigated. Two optimization models namely response surface methodology (RSM) and artificial neural network (ANN) were built to optimize the inoculum size and medium components for intracellular triterpenoid production from A. camphorata. Root mean squares error, R ², and standard error of prediction given by ANN model were 0.31%, 0.99%, and 0.63%, respectively, while RSM model gave 1.02%, 0.98%, and 2.08%, which indicated that fitness and prediction accuracy of ANN model was higher when compared to RSM model. Furthermore, using genetic algorithm (GA), the input space of ANN model was optimized, and maximum triterpenoid production of 62.84 mg l⁻¹ was obtained at the GA-optimized concentrations of arthroconidia (1.78 × 10⁵ ml⁻¹) and medium components (glucose, 25.25 g l⁻¹; peptone, 4.48 g l⁻¹; and soybean flour, 2.74 g l⁻¹). The triterpenoid production experimentally obtained using the ANN–GA designed medium was 64.79 ± 2.32 mg l⁻¹ which was in agreement with the predicted value. The same optimization process may be used to optimize many environmental and genetic factors such as temperature and agitation that can also affect the triterpenoid production from A. camphorata and to improve the production of bioactive metabolites from potent medicinal fungi by changing the fermentation parameters.     

Characterization of paralytic shellfish toxins in seawater and sardines (<Emphasis Type="Italic">Sardina pilchardus</Emphasis>) during blooms of <Emphasis Type="Italic">Gymnodinium catenatum</Emphasis>

The re-emergence of Gymnodinum catenatum blooms after a 10 year hiatus of absence initiated the present investigation. This study aims to evaluate the exposure of small pelagic fishes to paralytic shellfish toxins (PST) during blooms of G. catenatum. Sardines (Sardina pilchardus) were selected as a representative fish species. In order to assess toxin availability to fish, both intracellular PSTs (toxin retained within the algal cells) and extracellular PSTs (toxin found in seawater outside algal cells) were quantified, as well as toxin levels within three fish tissue matrices (viscera, muscle and brain). During the study period, the highest cell densities of G. catenatum reached 2.5 × 10⁴ cells l⁻¹ and intracellular PST levels ranged from 3.4 to 398 ng STXeq l⁻¹ as detected via an enzyme linked immunosorbent assay (ELISA). Measurable extracellular PSTs were also detected in seawater (0.2–1.1 μg STXeq l⁻¹) for the first time in Atlantic waters. The PST profile in G. catenatum was determined via high performance liquid chromatography with fluorescence detection (HPLC-FLD) and consisted mostly of sulfocarbamoyl (C1+2, B1) and decarbamoyl (dcSTX, dcGTX2+3, dcNEO) toxins. The observed profile was similar to that reported previously in G. catenatum blooms in this region before the 10-year hiatus. Sardines, planktivorous fish that ingest a large number of phytoplankton cells, were found to contain PSTs in the viscera, reaching a maximum of 531 μg STXeq kg⁻¹. PSTs were not detected in corresponding muscle or brain tissues. The PST profile characterized in sardine samples consisted of the same sulfocarbamoyl and decarbamoyl toxins found in the algal prey with minor differences in relative abundance of each toxin. Overall, the data suggest that significant biotransformation of PSTs does not occur in sardines. Therefore, planktivorous fish may be a good tracer for the occurrence of offshore G. catenatum blooms and the associated PSTs produced by these algae.     

An efficient protocol for micropropagation of <Emphasis Type="Italic">Melaleuca alternifolia</Emphasis> Cheel

Melaleuca alternifolia is cultivated for the production of an essential oil useful in the cosmetic and pharmaceutical industries. Despite the economic importance of this species, there is little knowledge about its in vitro propagation. The aim of this study was to establish an efficient protocol for micropropagation of M. alternifolia. With the goal of in vitro multiplication by axillary shoot proliferation, both solid and liquid MS and WPM media were tested with supplementation with BA at 0, 0.55, 1.11, 2.22, 3.33, and 4.44 μM. The best result for shoot multiplication was obtained when either 0.55 μM BA was added into solid MS medium or 1.11 μM BA was added into liquid MS medium, with 5.6 and 11.8 shoots per explant generated, respectively. On solid or liquid WPM medium supplemented with 0.55 μM BA, the proliferation rates were 5.5 and 4.7, respectively. Three auxins (NAA, IAA, and IBA) were tested at 0.53 and 2.64 μM during the rooting stage. Several sucrose concentrations (15, 30, and 45 g L⁻¹) were compared to a sucrose-free medium. Rooting performances on four culture media were then compared: MS, half-strength MS (MS/2), MS + activated charcoal (AC), and MS/2 + AC. The results showed that auxin addition to culture medium is not necessary for in vitro rooting. Rooted microcuttings from different culture media were acclimatized in a greenhouse, and the survival percentage was evaluated. All shoots cultured in an auxin-free MS medium supplemented with sucrose (30 g L⁻¹) produced roots, and all plants survived during acclimatization. Activated charcoal added in rooting medium reduced rooting rates.     

Microcalorimetric Study of <Emphasis Type="Italic">Tetrahymena</Emphasis> Growth Affected by Copper(II) Complexes

By means of microcalorimetry, the effect of four copper(II) complexes on Tetrahymena growth was investigated. The extent and duration of the inhibitory effect on the metabolism, judged by the rate constant, k, and the half inhibition concentration, IC₅₀, varied with the different complexes. The results showed that the half inhibition concentrations IC₅₀ of CuCl₂, (C₉H₆NO)₂Cu and [Cu(phen)₂]Cl₂⋅6H₂O were 9.9 × 10⁻⁴, 2.0 × 10⁻⁴, and 2.6 × 10⁻⁴ mol/L, respectively. The sequence of antibiotic activity of these three complexes was: (C₉H₆NO)₂Cu > [Cu(phen)₂]Cl₂⋅6H₂O > CuCl₂. The growth rate constants of [Cu(phen)₃]Cl₂⋅6H₂O did not change obviously with the increase of concentrations, but [Cu(phen)₃]Cl₂⋅6H₂O also can prolong the time of Tetrahymena growth.