Mechanistic action of pediocin and nisin: recent progress and unresolved questions

Nisin and pediocin PA-1 are examples of bacteriocins from lactic acid bacteria (LAB) that have found practical applications as food preservatives. Like other natural antimicrobial peptides, LAB bacteriocins act primarily at the cytoplasmic membranes of susceptible microorganisms. Studies with in vivo as well as in␣vitro membrane systems are directed toward understanding how bacteriocins interact with membranes so as to provide a mechanistic basis for their rational applications. The dissipation of proton motive force was identified early on as the common mechanism for the lethal activity of LAB bacteriocin. Models for nisin/membrane interactions propose that the peptide forms poration complexes in the membrane through a multi-step process of binding, insertion, and pore formation. This review focuses on the current knowledge of: (1) the mechanistic action of nisin and pediocin-like bacteriocins, (2) the requirement for a cell factor such as a membrane protein, (3) the influence of membrane potential, pH, and lipid composition on the of specificity and efficacy of bacteriocins, and (4) the roles of specific amino acids and structural domains of the bacteriocins in their action. Received: 3 April 1998 / Received last revision: 27 July 1998 / Accepted: 29 July 1998     

Growth and bacteriocin production by Enterococcus faecium DPC1146 in batch and continuous culture

Production of the bacteriocin enterocin 1146 (E1146) by Enterococcus faecium DPC1146 was studied in batch and continuous fermentation. Growth was strongly inhibited by lactic acid. In batch fermentations maximum E1146 activity (2.8 MBU L⁻¹) was obtained in 9 h with 20 g L⁻¹ glucose. Increase in initial glucose concentration did not lead to a proportional increase in E1146 activity. A simple linear model was found to be adequate to explain the relationship between specific bacteriocin production rate and specific growth rate in batch fermentations with initial glucose concentration higher than 20 g L⁻¹. Maximum bacteriocin activity (2.9–3.2 MBU L⁻¹) was obtained in continuous fermentations at dilution rates between 0.12 and 0.17 h⁻¹ and specific bacteriocin production rate increased linearly with dilution rate. Received 31 July 1996/ Accepted in revised form 01 November 1996     

The bacteriocins of ruminal bacteria and their potential as an alternative to antibiotics

Beef cattle have been fed ionophores and other antibiotics for more than 20 years to decrease ruminal fermentation losses (e.g methane and ammonia) and increase feed efficiency, and these improvements have been explained by an inhibition of gram-positive ruminal bacteria. Ionophores are not used to treat human disease, but there has been an increased perception that antibiotics should not be used as feed additives. Some bacteria produce small peptides (bacteriocins) that inhibit gram-positive bacteria. In vitro experiments indicated that the bacteriocin, nisin, and the ionophore, monensin, had similar effects on ruminal fermentation. However, preliminary results indicated that mixed ruminal bacteria degraded nisin, and the ruminal bacterium, Streptococcus bovis, became highly nisin-resistant. A variety of ruminal bacteria produce bacteriocins, and bacteriocin production has, in some cases, been correlated with changes in ruminal ecology. Some ruminal bacteriocins are as potent as nisin in vitro, and resistance can be circumvented. Based on these results, ruminal bacteriocins may provide an alternative to antibiotics in cattle rations.     

Influence of complex nutrients, temperature and pH on bacteriocin production by Lactobacillus sakei CCUG 42687

The effects of process conditions and growth kinetics on the production of the bacteriocin sakacin P by Lactobacillus sakei CCUG 42687 have been studied in pH-controlled fermentations. The fermentations could be divided into phases based on the growth kinetics, phase one being a short period of exponential growth, and three subsequent ones being phases of with decreasing specific growth rate. Sakacin P production was maximal at 20 °C. At higher temperatures (25–30 °C) the production ceased at lower cell masses, when less glucose was consumed, resulting in much lower sakacin P concentrations. With similar media and pH, the maximum sakacin P concentration at 20 °C was seven times higher than that at 30 °C. The growth rate increased with increasing concentrations of yeast extract, and the maximum concentration and specific production rate of sakacin P increased concomitantly. Increasing tryptone concentrations also had a positive influence upon sakacin P production, though the effect was significantly lower than that of yeast extract. The maximum sakacin P concentration obtained in this study was 20.5 mg l⁻¹. On the basis of the growth and production kinetics, possible metabolic regulation of bacteriocin synthesis is discussed, e.g. the effects of availability of essential amino acids, other nutrients, and energy. Received: 7 June 1999 / Received revision: 15 September 1999 / Accepted: 17 September 1999     

Succinoglycan production by solid-state fermentation with Agrobacterium tumefaciens

Succinoglycan was produced by cultivating Agrobacterium tumefaciens on various solid substrates, including agar medium, spent malt grains, ivory nut shavings, and grated carrots, impregnated with a nutrient solution. Fermentations were performed on a laboratory scale, both under static conditions and with agitation, using bottles and a prototype horizontal bioreactor. Several fermentation parameters were examined and optimized, including carbon and nitrogen composition, water content and layer thickness of the substrate. The yields and rheological properties of the polymers obtained under different fermentation conditions were compared. The highest succinoglycan yield was achieved in static cultivation, reaching 42 g/l of impregnating solution, corresponding to 30 g/kg of wet substrate. The polymer production in the horizontal bioreactor was faster, but the final yield was lower (29 g/l of impregnating solution). Received: 26 January 1999 / Received revision: 20 April 1999 / Accepted: 23 April 1999     

Mathematical evaluation of plantaricin formation supports an auto-induced production mechanism

The production rate of a bacteriocin, produced by Lactobacillus plantarum TMW1.25 and previously named plantaricin1.25, was studied during pH-constant batch fermentations under various growth media conditions. The growth of L. plantarum and production of bacteriocin during the retardation phase were modelled, using 11 different empirical and mechanistic approaches. The optimal pH for bacteriocin production was 4.5. Among the different nitrogen sources tested, yeast extract was the most important, on the basis of the fact that the maximum growth rate decreased 16% without yeast extract, and only 7.2% or 8.1% without meat extract or peptone respectively. However, the change of nitrogen source did not have a significant effect on bacteriocin production. The progression of plantaricin1.25 production during the retardation phase and growth of L. plantarum TMW1.25 could be described by a structured model in which the bacteriocin concentration induces its own production. Among those models not implementing bacteriocin induction, only the one with an exponential increase of bacteriocin yield per unit biomass was suitable to describe bacteriocin production. Computer-aided evaluation of experimental data appears to be helpful in elucidating the relationship between the growth of lactic acid bacteria and bacteriocin production. Received: 22 May 1998 / Received last revision: 9 November 1998 / Accepted: 14 November 1998     

Influence of temperature and pH on production of two bacteriocins by Leuconostoc mesenteroides subsp. mesenteroides FR52 during batch fermentation

The influence of temperature and pH on growth of Leuconostoc mesenteroides subsp. mesenteroides FR52 and production of its two bacteriocins, mesenterocin 52A and mesenterocin 52B, was studied during batch fermentation. Temperature and pH had a strong influence on the production of the two bacteriocins which was stimulated by slow growth rates. The optimal temperature was 20 °C for production of mesenterocin 52A and 25 °C for mesenterocin 52B. Optimal pH values were 5.5 and 5.0 for production of mesenterocin 52A and mesenterocin 52B respectively. Thus, by changing the culture conditions, production of one bacteriocin can be favoured in relation to the other. The relationship between growth and specific production rates of the two bacteriocins, as a function of the culture conditions, showed different kinetics of production and the presence of several peaks in the specific production rates during growth. Received: 13 February 1998 / Received revision: 27 May 1998 / Accepted: 1 June 1998     

Microbial production of bacteriocins: Latest research development and applications

Bacteriocins are low molecular weight peptides secreted by the predator bacterial cells to kill sensitive cells present in the same ecosystem competing for food and other nutrients. Exceptionally few bacteriocins along with their native antibacterial property also exhibit additional anti-viral and anti-fungal properties. Bacteriocins are generally produced by Gm+, Gm– and archaea bacteria. Bacteriocins from Gm?+?bacteria especially from lactic acid bacteria (LAB) have been thoroughly investigated considering their great biosafety and broad industrial applications. LAB expressing bacteriocins were isolated from fermented milk and milk products, rumen of animals and soil using deferred antagonism assay. Nisin is the only bacteriocin that has got FDA approval for application as a food preservative, which is produced by Lactococcus lactis subsp. Lactis. Its crystal structure explains that its antimicrobial properties are due to the binding of NH₂ terminal to lipid II molecule inhibiting the peptidoglycan synthesis and carboxy terminal forming pores in bacterial cell membrane leading to cell lysis. The hinge region connecting NH₂ and carboxy terminus has been mutated to generate mutant variants with higher antimicrobial activity. In a 50 ton fermentation of the mutant strain 3807 derived from L. lactis subsp. lactis ATCC 11454, 9,960?IU/mL of nisin was produced. Currently, high purity of nisin (>99%) is very expensive and hardly commercially available. Development of more advanced tools for cost-effective separation and purification of nisin would be commercially attractive. Chemical synthesis and heterologous expression of bacteriocins ended in low yields of pure proteins. At present, bacteriocins are almost solely applied in food industries, but they have a great potential to be used in other fields such as feeds, organic fertilizers, environmental protection and personal care products. The future of bacteriocins is largely dependent on getting FDA approval for use of other bacteriocins in addition to nisin to promote the research and applications.     

The effect of heat-shocking on batch fermentation by Clostridium beijerinckii NRRL B592

 In spite of the large-scale industrial use of the acetone-butanol fermentation process earlier this century (until 1983 in South Africa), very little has been published on the inoculum preparation techniques required for successful fermentation using these bacteria. In particular, heat-shocking has often been referred to as “useful” but no quantitative data are available. Data presented in this paper demonstrate and quantify the effect of heat-shocking on batch fermentation yields using one organism capable of this fermentation. Received: 27 August 1999 / Received revision: 23 December 1999 / Accepted: 5 January 2000     

Lantibiotic nisin Z fermentative production by Lactococcus lactis IO-1: relationship between production of the lantibiotic and lactate and cell growth

 The influence of several parameters on the fermentative production of nisin Z by Lactococcus lactis IO-1 was studied. Considerable attention has been focused on the relationship between the primary metabolite production of bacteriocin and lactate and cell growth, which has so far not been clarified in detail. Production of nisin Z was optimal at 30°C and in the pH range 5.0–5.5. The addition of Ca²⁺ to the medium showed a stimulating effect on the production of nisin Z. A maximum activity of 3150 IU/ml was obtained during pH-controlled batch fermentation in the medium supplemented with 0.1 M CaCl₂. It was about three times higher than that obtained under the optimal conditions for cell growth and lactic acid production. Received: 12 July 1995/Received revision: 11 September 1995/Accepted: 4 October 1995     

Neutralization/recovery of lactic acid from Lactococcus lactis: effects on biomass,lactic acid,and nisin production

Besides lactic acid, many lactic acid bacteria also produce proteinaceous metabolites (bacteriocins) such as nisin. As catabolite repression and end-product inhibition limit production of both products, we have investigated the use of alternative methods of supplying substrate and neutralizing or extracting lactic acid to increase yields. Fed-batch fermentation trials using a stillage-based medium with pH control by NH4OH resulted in improved lactic acid (83.4 g/l, 3.18 g/l/h, 95% yield) and nisin (1,260 IU/ml, 84,000 IU/l/h, 14,900 IU/g) production. Removing particulate matter from the stillage-based medium increased nisin production (1,590 IU/ml, 33,700 IU/g), but decreased lactic acid production (58.5 g/l, 1.40 g/l/h, 96% yield). Removing lactic acid by ion exchange resins stimulated higher lactic acid concentrations (60 to 65 g/l) and productivities (2.0 to 2.6 g/l/h) in the filtered stillage medium at the expense of nisin production (1,500 IU/ml, 25,800 IU/g).     

Combined Effect of Bacteriocins on the Survival of Various Listeria Species in Broth and Meat System

The antilisterial efficiency of three bacteriocins from lactic acid bacteria, lactocin 705 (produced by L. casei CRL705, 17000 AU/ml), enterocin CRL35 (produced by E. faecium CRL35, 17000 AU/ml), and nisin (2000 IU/ml), was tested in broth, individually and in combination against Listeria monocytogenes and Listeria innocua. Both Listeria species showed an initial decrease in viable counts followed by the regrowth of the survivors after 1 h in the presence of each bacteriocin. A greater antilisterial effect was observed when the bacteriocins were combined in pairs, maximal inhibition being reached when nisin was involved. When a mix of the three bacteriocins was used, no survivors were observed after 24 h of incubation. Similar results were obtained when the bacteriocin combinations were tested in a meat system, indicating that the use of more than one LAB bacteriocin in combination may be effective in preventing the spontaneous emergence of a bacteriocin-resistant Listeria population. Received: 17 March 2000 / Accepted: 26 June 2000     

Bacteriocin Production and Different Strategies for Their Recovery and Purification

Bacteriocins from lactic acid bacteria (LAB) are a diverse group of antimicrobial proteins/peptides, offering potential as biopreservatives, and exhibit a broad spectrum of antimicrobial activity at low concentrations along with thermal as well as pH stability in foods. High bacteriocin production usually occurs in complex media. However, such media are expensive for an economical production process. For effective use of bacteriocins as food biopreservatives, there is a need to have heat-stable wide spectrum bacteriocins produced with high-specific activity in food-grade medium. The main hurdles concerning the application of bacteriocins as food biopreservatives is their low yield in food-grade medium and time-consuming, expensive purification processes, which are suitable at laboratory scale but not at industrial scale. So, the present review focuses on the bacteriocins production using complex and food-grade media, which mainly emphasizes on the bacteriocin producer strains, media used, different production systems used and effect of different fermentation conditions on the bacteriocin production. In addition, this review emphasizes the purification processes designed for efficient recovery of bacteriocins at small and large scale.     

Critical factors in chitin production by fermentation of shrimp biowaste

Factors affecting Lactobacillus fermentation of shrimp waste for chitin and protein liquor production were determined. The objective of the fermentation is medium conditioning by Lactobacillus through production of proteases and lowering of the pH. The efficiency was tested by conducting fermentation of biowaste in 1-l beakers with or without pH adjustment using different acids. Addition of 5% glucose to the biowaste supported the growth of lactic acid bacteria and led to better fermentation. Among four acids tested to control pH at the start and during fermentation, acetic acid and citric acid proved to be the most effective. In biowaste fermented with 6.7% L. plantarum inoculum, 5% glucose, and pH 6.0 adjusted with acetic acid, 75% deproteination and 86% demineralization was achieved. Replacement of acetic acid by citric acid gave 88% deproteination and 90% demineralization. The fermentation carried out in the presence of acetic acid resulted in a protein fraction that smelled good and a clean chitin fraction. Received: 4 April 2000 / Received revision: 9 June 2000 / Accepted: 9 June 2000     

Novel method to extract large amounts of bacteriocins from lactic acid bacteria.

Antimicrobial peptides, bacteriocins, produced by lactic acid bacteria were adsorbed on the cells of producing strains and other gram-positive bacteria. pH was a crucial factor in determining the degree of adsorption of these peptides onto cell surfaces. In general, between 93 and 100% of the bacteriocin molecules were adsorbed at pHs near 6.0, and the lowest (< or = 5%) adsorption took place at pH 1.5 to 2.0. On the basis of this property, a novel isolation method was developed for bacteriocins from four genera of lactic acid bacteria. By using this method we made preparations of pediocin AcH, nisin, sakacin A, and leuconocin Lcm1 that were potent and concentrated. This method produced a higher yield than isolation procedures, which rely on precipitation of the bacteriocins from the cell-free culture liquor. It is simple and can be used to produce large quantities of bacteriocins from lactic acid bacteria to be used as food biopreservatives.     

Antibacterial metabolites of lactic acid bacteria: their diversity and properties

The review is devoted to literature data on antimicrobial metabolites produced by lactic acid bacteria (LAB), which have long been used for the preparation of cultured dairy products. This paper summarizes data on low-molecular-weight antimicrobial substances, which are primary products or by-products of lactic fermentation. Individual sections are devoted to a variety of antifungal agents and bacteriocins produced by LAB; their potential use as food preservatives has been discussed. The characteristics and classification of bacteriocins are presented in a greater detail; their synthesis and mechanism of action are described using the example of nisin A, which belongs to class I lantibiotics synthesized by the bacterium Lactococcus lactis subsp. lactis. The mechanism of action of class II bacteriocins has been demonstrated with lacticin. Prospective directions for using LAB antimicrobial metabolites in industry and medicine are discussed in the Conclusion.     

Characterization of Mundticin L,a Class IIa Anti-Listeria Bacteriocin from Enterococcus mundtii CUGF08

Enterococcus mundtii CUGF08, a lactic acid bacterium isolated from alfalfa sprouts, was found to produce mundticin L, a new class IIa bacteriocin that has a high level of inhibitory activity against the genus Listeria. The plasmid-associated operons containing genes for the mundticin L precursor, the ATP binding cassette (ABC) transporter, and immunity were cloned and sequenced. The fifth residue of the conservative consensus sequence YGNGX in the mature bacteriocin is leucine instead of valine in the sequences of the homologous molecules mundticin KS (ATO6) and enterocin CRL35. The primary structures of the ABC transporter and the immunity protein are homologous but unique.Bacteriocins are ribosomally synthesized proteinaceous compounds that inhibit closely related bacteria (19). Due to consumer concerns with chemical and irradiation preservation methods and due to the rising demand for minimally processed food products, alternative methods for shelf life extension and enhanced safety are needed. Bacteriocins are considered “natural” antimicrobials since many bacteriocins are produced by food grade lactic acid bacteria, which are generally recognized as safe. Bacteriocins can be divided into three main classes: the class I lanthionine-containing lantibiotics, exemplified by nisin; the class II non-lanthionine-containing bacteriocins; and the class III heat-labile, large proteins (6). Class III bacteriocins have limited application due to their thermal instability and cytolytic activity against eukaryotic cells. Class II can be further divided into class IIa containing pediocin-like bacteriocins, class IIb containing two-peptide bacteriocins, and class IIc containing other bacteriocins (8). Class IIa bacteriocins have been extensively studied since pediocin PA-1 was first discovered (12) and characterized (20). Currently, only nisin in class I has been approved by the FDA as a natural food additive. Bacteriocins belonging to class IIa are promising alternative antimicrobials since they are more stable over a broader range of heating regimens and pH conditions. In addition, these bacteriocins exhibit stronger antimicrobial activity against the genus Listeria than nisin (17) but have a narrower antimicrobial spectrum.The potential applications of class IIa bacteriocins in both meat and plant-based foods as a means to provide protection against potential food-borne pathogens and extend shelf life continue to expand. In an attempt to use biological methods for controlling food-borne pathogens on fresh sprouts, a number of food grade lactic acid bacteria were isolated from the indigenous microbiota on alfalfa sprouts. Some of these isolates were found to be bacteriocinogenic. This study describes a new class IIa bacteriocin, mundticin L produced by Enterococcus mundtii CUGF08 isolated from alfalfa sprouts.     

Antibacterial metabolites of lactic acid bacteria: Their diversity and properties

The review is devoted to literature data on antimicrobial metabolites produced by lactic acid bacteria (LAB), which have long been used for the preparation of cultured dairy products. This paper summarizes data on low-molecular-weight antimicrobial substances, which are primary products or by-products of lactic fermentation. Individual sections are devoted to a variety of antifungal agents and bacteriocins produced by LAB; their potential use as food preservatives has been discussed. The characteristics and classification of bacteriocins are presented in a greater detail; their synthesis and mechanism of action are described using the example of nisin A, which belongs to class I lantibiotics synthesized by the bacterium Lactococcus lactis subsp. lactis. The mechanism of action of class II bacteriocins has been demonstrated with lacticin. Prospective directions for using LAB antimicrobial metabolites in industry and medicine are discussed in the Conclusion.     

Effect of feeding strategy on Zymomonas mobilis CP4 fed-batch fermentations and mathematical modeling of the system

In this work, the effect of the feeding strategy in Zymomonas mobilis CP4 fed-batch fermentations on the final biomass and ethanol concentrations was studied. Highest glucose yields to biomass (0.018 g/g) and to ethanol (0.188 g/g) were obtained in fed-batch fermentations carried out using different feeding rates with a glucose concentration in the feed equal to 100 g/l. Lower values (0.0102 g biomass/g glucose and 0.085 g ethanol/g glucose) were obtained when glucose accumulated to levels higher than 60 g/l. On the other hand, the highest biomass (5 g/l) and ethanol (39 g/l) concentrations were obtained using a glucose concentration in the feed equal to 220 g/l and exponentially varied feeding rates. Experimental data were used to validate the mathematical model of the system. The prediction errors of the model are 0.39, 14.36 and 3.24 g/l for the biomass, glucose and ethanol concentrations, respectively. Due to the complex relationship for describing the specific growth rate, a fed-batch culture in which glucose concentration is constant would not optimize the process. Received: 30 November 1999 / Received revision: 24 March 2000 / Accepted: 7 April 2000     

Comparison of exopolysaccharide production by strains of Lactobacillus rhamnosus and Lactobacillus paracasei grown in chemically defined medium and milk

Exopolysaccharide (EPS) production was compared among three strains of lactobacilli. Lactobacillus rhamnosus strain 9595M can be classified among the highest EPS-producing strains of lactic acid bacteria reported to date with a maximum EPS production of 1275 mg L⁻¹. Under controlled pH, no significant differences in the quantity of EPS produced could be detected between carbon source (glucose or lactose) or fermentation temperature (32 or 37°C). In milk, strains ATCC 9595M and R produced more than 280 mg L⁻¹ EPS whereas strain Type V produced less than 80 mg L⁻¹ EPS. Journal of Industrial Microbiology & Biotechnology (2000) 24, 251–255. Received 10 September 1999/ Accepted in revised form 22 December 1999