Molecular cloning and characterization of genes required for ribose transport and utilization in Escherichia coli K-12.

We isolated spontaneous and transposon insertion mutants of Escherichia coli K-12 that were specifically defective in utilization or in high-affinity transport of D-ribose (or in both). Cotransduction studies located all of the mutations near ilv, at the same position as previously identified mutations causing defects in ribokinase ( rbsK ) or ribose transport ( rbsP ). Plasmids that complemented the rbs mutations were isolated from the collection of ColE1 hybrid plasmids constructed by Clarke and Carbon. Analysis of those plasmids as well as of fragments cloned into pBR322 and pACYC184 allowed definition of the rbs region. Products of rbs genes were identified by examination of the proteins produced in minicells containing various rbs plasmids. We identified four rbs genes: rbsB , which codes for the 29-kilodalton ribose-binding protein; rbsK , which codes for the 34-kilodalton ribokinase ; rbsA , which codes for a 50-kilodalton protein required for high-affinity transport; and rbsC , which codes for a 27-kilodalton protein likely to be a transport system component. Our studies showed that these genes are transcribed from a common promoter in the order rbsA rbsC rbsB rbsK . It appears that the high-affinity transport system for ribose consists of the three components, ribose-binding protein, the 50-kilodalton RbsA protein, and the 27-kilodalton RbsC protein, although a fourth, unidentified component could exist. Mutants defective in this transport system, but normal for ribokinase , are able to grow normally on high concentrations of the sugar, indicating that there is at least a second, low-affinity transport system for ribose in E. coli K-12.     

A self-inducing runaway-replication plasmid expression system utilizing the Rop protein

A highly efficient prokaryotic expression system has been developed that produces proteins at levels exceeding 150 micrograms/ml of culture medium. The system consists of a temperature-sensitive-copy-number plasmid that carries the rop gene and promoter downstream from the trp promoter. Any sequence cloned into the PvuII site of the rop gene alters Rop protein activity and causes lethal runaway plasmid DNA replication. This plasmid replication can be suppressed in trans by complementation with a similar wild-type plasmid. Cells harboring both plasmids are quite stable, and induction of plasmid DNA synthesis occurs only after cells are grown for several generations under conditions that lead to the loss of the trans-acting repressor. Large amounts of Rop fusion proteins accumulate in the cell as the trp operon is gradually induced via repressor titration. All chimeric proteins accumulate as insoluble aggregates, and are therefore easily purified. They can be solubilized using relatively mild conditions, and the partially purified proteins are highly amenable to cleavage by chemical methods. Using this system we have made Rop fusions with the HIV Tat protein, the herpes simplex virus type-2 38K protein, and Chinese hamster metallothionin.     

CS3纤毛抗原表达调控机理的研究

ＣＳ３是某些肠毒素大肠杆菌菌体表面上的多聚物,它能使病原菌粘附于宿主的小肠上皮细胞上,是致病的重要因素．为了探索ＣＳ３菌毛抗原基因的表达调控机制,根据ＣＳ３亚基结构基因的核苷酸序列分析表明,在其翻译起始位点的上游存在着ｒｂｓ位点及原核启动子的－１０区和－３５区ＤＮＡ序列．采用基因重组技术将ＣＳ３结构基因上游１２０ｂｐ的ＤＮＡ片段亚克隆进缺乏启动子而只含报告基因ｌａｃＺ的质粒ｐＣＢ２６７中．凝胶滞留和启动报告基因表达的实验证明了ＣＳ３亚基结构基因具有自身的启动子（Ｐｓ）．将该启动子上游区域不同长度的核苷酸片段克隆进ｐＣＢ２６７中,报告基因表达结果表明ＣＳ３结构基因的表达受其上游区域的抑制．核苷酸序列分析发现,在Ｐｓ－３５区上游５５０ｂｐ和８４０ｂｐ处各存在一个富Ａ－Ｔ簇．结合原核启动子的一般作用规律推知,ＣＳ３的表达可能受ＤＮＡ结合蛋白型的正向调节因子的作用．用ＣＦＡ／１菌毛抗原基因的正向调节基因ｃｆａＤ对ＣＳ３基因进行的互补表达试验表明ｃｆａＤ基因不仅可消除上游区对Ｐｓ的抑制,而且可大幅度地提高Ｐｓ的启动能力．在分析表达调控的基础上获得ＣＳ３重组高效表达．同时提出了其表达调控模型．     

Three functions of bacteriophage P1 involved in cell lysis.

Amber and deletion mutants were used to assign functions in cell lysis to three late genes of bacteriophage P1. Two of these genes, lydA and lydB of the dar operon, are 330 and 444 bp in length, respectively, with the stop codon of lydA overlapping the start codon of lydB. The third, gene 17, is 558 bp in length and is located in an otherwise uncharacterized operon. A search with the predicted amino acid sequence of LydA for secondary motifs revealed a holin protein-like structure. Comparison of the deduced amino acid sequence of gene 17 with sequences of proteins in the SwissProt database revealed homologies with the proteins of the T4 lysozyme family. The sequence of lydB is novel and exhibited no known extended homology. To study the effect of gp17, LydA, and LydB in vivo, their genes were cloned in a single operon under the control of the inducible T7 promoter, resulting in plasmid pAW1440. A second plasmid, pAW1442, is identical to pAW1440 but has lydB deleted. Induction of the T7 promoter resulted in a rapid lysis of cells harboring pAW1442. In contrast, cells harboring pAW1440 revealed only a small decrease in optical density at 600 nm compared with cells harboring vector alone. The rapid lysis phenotype in the absence of active LydB suggests that this novel protein might be an antagonist of the holin LydA.     

Uracil uptake in Escherichia coli K-12: isolation of uraA mutants and cloning of the gene.

Mutants defective in utilization of uracil at low concentrations have been isolated and characterized. The mutations in question (uraA) map close to the upp gene encoding uracil phosphoribosyltransferase. By complementation analysis, a plasmid that complements the uraA mutation has been isolated. The uraA gene was shown to be the second gene in a bicistronic operon with upp as the promoter proximal gene. The nucleotide sequence of the gene was determined, and the gene encodes a hydrophobic membrane protein with a calculated Mr of 45,030. The UraA protein has been identified in sodium dodecyl sulfate-polyacrylamide gels in the membrane fraction of minicells harboring the uraA plasmids.     

Nucleotide sequence and functions of the oriT operon in IncI1 plasmid R64.

Two transfer genes of IncI1 plasmid R64, tentatively designated nikA and nikB, were cloned and sequenced. They are located adjacent to the origin of transfer (oriT) and appear to be organized into an operon, which we call the oriT operon. On the basis of the DNA sequence, nikA and nikB were concluded to encode proteins with 110 and 899 amino acid residues, respectively. Complementation analysis indicated that these two genes are indispensable for the transfer of R64 but are not required for the mobilization of ColE1. By the maxicell procedure, the product of nikA was found to be a 15-kDa protein. On treating a cleared lysate prepared from cells harboring a plasmid containing oriT, nikA, and nikB with sodium dodecyl sulfate or proteinase K, superhelical plasmid DNA in the cleared lysate was converted to an open circular form (relaxation). Relaxation of plasmid DNA was found to require the oriT sequence in cis and the nikA and nikB sequences in trans. It would thus follow that the products of nikA and nikB genes form a relaxation complex with plasmid DNA at the oriT site.     

The construction of a synthetic Escherichia coli trp promoter and its use in the expression of a synthetic interferon gene.

An 82 base pair DNA fragment has been synthesised which contains the E. coli trp promoter and operator sequences and also encodes the first Shine Dalgarno sequence of the trp operon. This DNA fragment is flanked by EcoRI and ClaI/TaqI cohesive ends and is thus easy to clone, transfer between vector systems and couple to genes to drive their expression. It has been cloned into plasmid pAT153, producing a convenient trp promoter vector. We have also joined the fragment to a synthetic IFN-alpha 1 gene, using synthetic oligonucleotides to generate a completely natural, highly efficient bacterial translation initiation signal on the promoter proximal side of the IFN gene. Plasmids carrying this construction enable E. coli cells to express IFN-alpha 1 almost constitutively and with significantly higher efficiency than from a lacUV5 promoter based system.     

Purification and properties of Gal repressor:pL-galR fusion in pKC31 plasmid vector

The galR gene, which encodes the Gal repressor protein in Escherichia coli, has been fused to the strong pL promoter of bacteriophage lambda in plasmid pKC31. The pL promoter is kept repressed by a thermolabilie lambda repressor, CIts857, to prevent cell killing. Heat induction of the pL-galR fusion plasmid synthesizes large amounts of active Gal repressor. The protein has been purified to homogeneity in three steps. The purification is greatly aided by the reversible insolubility of active repressor in crude extract at salt concentrations of less than 200 mM. The amino-terminal amino acid sequence determined by automated Edman degradation is: N-Ala-Thr-Ile-Lys-Asp-Val-Ala-Arg-Leu-Ala-Gly-Val-Ser-Val-Ala-Thr-Val-. Comparison of this sequence with that deduced from the DNA sequence of the galR gene showed that the formyl methionine residue preceding alanine at position 1 is cleaved off. The repressor is present in solution as a dimer of a 37-kDa subunit. The protein binds to gal DNA containing wild type and not mutant operator sequences. As predicted, this sequence-specific binding is inhibited by the presence of D-galactose or D-fucose, both of which are in vivo inducers of the gal operon. Gal repressor inhibits the expresison of gal operon by binding to two spatially separated operators which flank, but do not overlap, the gal promoter segment. Experiments to study the mechanism of repressor action are discussed.     

Analysis of the Escherichia coli proBA locus by DNA and protein sequencing

A 2.9 kb DNA fragment carrying the Escherichia coli proBA region, which encodes the first two enzymes of the proline biosynthetic pathway, was subcloned onto an expression plasmid carrying both the bacteriophage lambda PL promoter (lambda PL) and the lambda gene encoding a thermolabile cI repressor protein (cI857). Derepression of the lambda PL promoter by thermal inactivation of the cI857 repressor protein resulted in the simultaneous overproduction of the proB (gamma-glutamyl kinase) and proA (gamma-glutamyl phosphate reductase) gene products. Nucleotide sequence analysis of the proBA locus allowed gene assignments consistent with the NH2 and COOH-terminal analyses and amino acid compositions of homogeneous preparations of the proB and proA proteins. The contiguous nature of the proB and proA genes suggests that the two genes constitute an operon in which proB precedes proA.     

Nucleotide sequence of the Escherichia coli dnaJ gene and purification of the gene product

The dnaJ and dnaK genes are essential for replication of Escherichia coli DNA, and they constitute an operon, dnaJ being downstream from dnaK. The amount of the dnaJ protein in E. coli is substantially less than that of the dnaK protein, which is produced abundantly. In order to construct a system that over-produces the dnaJ protein, we started our study by determining the DNA sequence of the entire dnaJ gene, and an operon fusion was constructed by inserting the gene downstream of the lambda PL promoter of an expression vector plasmid, pPL-lambda. Cells containing the recombinant plasmid produced dnaJ protein amounting to 2% of the total cellular protein when cells were induced. The overproduced protein was purified, and Edman degradation of the protein indicated that the NH2-terminal methionine was found to be processed. From the DNA sequence of the dnaJ gene, the processed gene product is composed of 375 amino acid residues, and its molecular weight is calculated to be 40,975.     

Characterization of the genes for the hexagonally arranged surface layer proteins in protein-producing Bacillus brevis 47: complete nucleotide sequence of the middle wall protein gene.

Bacillus brevis 47 contains two surface (S)-layer proteins, termed the outer wall protein (OWP) and the middle wall protein (MWP), which form a hexagonal array in the cell wall. The MWP and OWP genes are contained in the 9-kilobase-pair (kbp) BclI fragment and constitute an operon under coordinate control of their expression. The nucleotide sequence of a 3.8-kbp EcoRI-SacI fragment containing the entire MWP gene has been determined in this study. Together with the DNA sequence of the promoter region for the MWP-OWP gene operon (H. Yamagata, T. Adachi, A. Tsuboi, M. Takao, T. Sasaki, N. Tsukagoshi, and S. Udaka, J. Bacteriol. 169:1239-1245, 1987) and that of the OWP gene (A. Tsuboi, R. Uchihi, R. Tabata, Y. Takahashi, H. Hashiba, T. Sasaki, H. Yamagata, N. Tsukagoshi, and S. Udaka, J. Bacteriol. 168:365-373, 1986), the complete nucleotide sequence of the MWP-OWP gene operon has been determined. The MWP gene encodes a secretory precursor of the MWP, consisting of a total of 1,053 amino acid residues with a signal peptide of 23 amino acid residues at its amino-terminal end. Bacillus subtilis harboring the MWP gene synthesized an immunoreactive polypeptide with almost the same molecular weight as the authentic MWP, as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The amino acid compositions deduced from the MWP and OWP genes were similar to the chemical amino acid compositions of other S-layer proteins in the predominance of acidic amino acids compared with basic amino acids and in the very low content of sulfur-containing amino acids. The acidic nature of the MWP and OWP was confirmed by isoelectric focusing on polyacrylamide gels. In addition, circular dichroism spectra indicated that the S-layer proteins in B. brevis 47 were composed of approximately 30% beta-sheet and 5% alpha-helical structures, with the remainder of the polypeptide backbone being aperiodic in nature.