Film-forming process and biocide assessment of high-molecular-weight chitosan as determined by combined ATR-FTIR spectroscopy and antimicrobial assays

This pioneering study reported about the film-forming properties of high-molecular-weight chitosan as followed in situ by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and has implications in fields such as biomedical, pharmaceutical, packaging, and coating applications. From the results, it was observed that immediately after dissolution in an acetic acid aqueous solution and subsequent casting over the ATR crystal, the formed carboxylate antimicrobial (-NH3+ -OOCH) species are not stable in the film formulation and become reduced over time; further assays confirmed previous research, which suggested that the presence and stability of these groups is strongly dependent, among other factors, on storage conditions. As-received chitosan and chitosan neutralized in NaOH films did not exhibit biocide performance towards Staphylococcus aureus. The antimicrobial tests were also found to strongly relate the presence of a sufficient quantity of these carboxylate groups to the chitosan activity as a biocide agent. Moreover, a novel methodology based on the use of a normalized infrared band centered at 1405 cm(-1) is proposed which can be correlated with the antimicrobial character of the biopolymer.     

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.     

Surface properties of membrane systems. Transport of staphylococcal delta-toxin from aqueous to membrane phase

Hemolytic delta-toxin from Staphylococcus aureus was soluble in either water, methanol or chloroform/methanol (2 : 1, v/v). The toxin spread readily from distilled water into films with pressures (pi) of 10 dynes/cm on water and 30 dynes/cm on 6 M urea; from chloroform/methanol it produced 40 dynes/cm pressure on distilled water. The toxin adsorbed barely from water (pi = 1 dyne/ cm) but it did rapidly from 6 M urea (pi = 35 dynes/cm). The protein films had unusually high surface potentials, which increased with the film pressure and decreased with increasing both pH and urea concentration in the aqueous phase. The fluorescence of 1-aniline 8-naphthalene sulfonate with delta-toxin was much greater than that with RNAase and dipalmitoyl phosphatidylcholine itself, indicating probably a marked lipid-binding character of the toxin. By circular dichroism the alpha-helix content of delta-toxin was 42% in water, 45% in methanol, 24% in 6 M urea. Infrared spectroscopy showed predominant alpha-helix in both 2H2O and deuterated chloroform/methanol as well as in films spread from either solvent on 2H2O. In spreading from 6 M [2H]urea, in which the major infrared absorption was that of [2H]urea with peaks at 1600 and 1480 cm(-1), the delta-toxin film showed prevalently non-alpha-helix structures with major peak intensities at 1633 cm(-1) > 1680 cm(-1), indicating the appearance of new beta-aggregated and beta-antiparallel pleated sheet structures in the film. The data prove that (1) high pressure protein films can consist of alpha-helix as well as non-alpha-helix structures and, differently from another cytolytic protein, melittin, delta-toxin does not resume the alpha-helix conformation in going into the film phase from the extended chain in 6 M urea; (2) conformational changes are important in the transport of proteins from aqueous to lipid or membrane phase; (3) delta-toxin is by far more versatile in structural dynamics and more surface active than alpha-toxin.     

Recent applications of ATR FTIR spectroscopy and imaging to proteins

Attenuated Total Reflection (ATR) Fourier Transform Infrared (FTIR) spectroscopy is a label-free, non-destructive analytical technique that can be used extensively to study a wide variety of different molecules in a range of different conditions. The aim of this review is to discuss and highlight the recent advances in the applications of ATR FTIR spectroscopic imaging to proteins. It briefly covers the basic principles of ATR FTIR spectroscopy and ATR FTIR spectroscopic imaging as well as their advantages to the study of proteins compared to other techniques and other forms of FTIR spectroscopy. It will then go on to examine the advances that have been made within the field over the last several years, particularly the use of ATR FTIR spectroscopy for the understanding and development of protein interaction with surfaces. Additionally, the growing potential of Surface Enhanced Infrared Spectroscopy (SEIRAS) within this area of applications will be discussed. The review includes the applications of ATR FTIR imaging to protein crystallisation and for high-throughput studies, highlighting the future potential of the technology within the field of protein structural studies and beyond.     

Vibrational circular dichroism of carbohydrate films formed from aqueous solutions

Vibrational circular dichroism (VCD) spectra in the entire 2000-900 cm(-1) region have been recorded, for the first time, for films of carbohydrates prepared from aqueous solutions. Eight different carbohydrates, alpha-D-glucopyranosyl-(1-->4)-D-glucose, cyclomaltohexaose, alpha-D-glucopyranosyl alpha-D-glucopyranoside, beta-D-glucopyranosyl-(1-->6)-D-glucose, beta-D-glucopyranosyl-(1-->4)-D-glucose, D-glucose, and both enantiomers of 6-deoxygalactose and of allose, were investigated. The VCD spectra obtained for films are found to be identical to the corresponding spectra obtained for aqueous solutions of carbohydrates. These measurements demonstrate several advantages of significant importance. The strong infrared absorption of water has prevented, in the past, the pursuit for routine applications of VCD in determining the structures of carbohydrates in aqueous solutions. This limitation is not present for film studies because water solvent is removed in the process of preparing the films. Also, strong infrared absorption of water at 1650 cm(-1) requires the use of very short-pathlength (6 microm) cells for measurements on aqueous solutions. This requirement and concomitant inconveniences (such as laborious assembling of a demountable liquid cell or purchasing an expensive variable pathlength liquid cell) have been eliminated for film measurements. The removal of interfering water absorption in film studies resulted in higher light throughput and better signal-to-noise ratios for VCD measurements. Another point of significance is that the amount of carbohydrate sample required for VCD measurements on films is approximately one to two orders of magnitude smaller than that required for corresponding VCD measurements on aqueous solutions. Since carbohydrate samples can now be studied as films, VCD spectroscopy becomes much more broadly applicable for carbohydrates than previously believed. The present work, in combination with other film measurements in our laboratory, indicate that VCD studies on films can be used more generally, providing a convenient and powerful approach for probing structural information for biologically important compounds.     

The plasticizing mechanism and effect of calcium chloride on starch/poly(vinyl alcohol) films

Starch/poly(vinyl alcohol) (PVA) films were prepared with calcium chloride (CaCl(2)) as the plasticizer. The micro morphology of pure starch/PVA film and CaCl(2) plasticized starch/PVA film was observed by scanning electron microscope. The interaction between CaCl(2) and starch/PVA molecules was investigated by Fourier transform infrared spectroscopy. The influence of CaCl(2) on the crystalline, thermal and mechanical properties of starch/PVA films was studied by X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and tensile testing, respectively. The results indicated that CaCl(2) could interact with starch and PVA molecules and then effectively destroy the crystals of starch and PVA. Starch/PVA films plasticized with CaCl(2) became soft and ductile, with lower tensile strength and higher elongation at break compared with pure starch/PVA film. The water content of starch/PVA film would increase with the addition of CaCl(2). This is an important cause of the plasticization of CaCl(2) on starch/PVA film.     

Conformational changes in bacteriorhodopsin studied by infrared attenuated total reflection.

We report on a new method based on Fourier transform infrared (FTIR)-difference spectroscopy for studying the conformational changes occurring during the photocycle of bacteriorhodopsin. Previous studies have been made by measuring the absorbance of an infrared (IR) beam transmitted through a thin hydrated purple membrane film. In contrast, the present study utilizes the technique of attenuated total reflection (ATR). Purple membrane is fixed on the surface of a germanium internal reflection crystal and immersed in a buffer whose pH and ionic composition can be varied. Measurements of the amide I and II absorbance with light polarized parallel and at 45 degrees to the crystal surface reveals that the membrane is highly oriented. An ATR-FTIR-difference spectrum of the light to dark (bR570 to bR548) transition is similar but not identical to the transmittance FTIR-difference spectrum. This disagreement between the two methods is shown to be due in the ATR case to the absorption of transition moments oriented predominantly out of the membrane plane. Raising the pH of La3+ substituted purple membrane films from 6.8 to 8.0 slows the M-decay rate sufficiently so that a bR570 to M412 difference spectrum can be obtained with steady state illumination at room temperature. A comparison of this difference spectrum with that obtained at -23 degrees C using the transmittance method reveals several changes that cannot be attributed to out-of-plane transition moments.(ABSTRACT TRUNCATED AT 250 WORDS)     

Surface composition and morphology of starch,amylose, and amylopectin films

The surfaces of solution-cast films of starch, amylose, and amylopectin were examined with scanning electron microscopy (SEM), atomic force microscopy (AFM), electron spectroscopy for chemical analysis (ESCA), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The surface topography visualized by SEM showed that amylopectin films were very smooth whereas amylose and starch films were rougher. It appears that crystallinity or phase separation in the bulk of the film affects the surface topography. AFM showed that the outmost surfaces of all films were covered with small protrusions, 15-35 nm wide and 1-4 nm high. Studies with ESCA revealed the presence of 3-8% nitrogen on the surfaces. ToF-SIMS indicated that the nitrogen originates from protein because ionic fragments from amino acids and the peptide backbone were found. Extracts from the top surface layer of the starch film showed protein bands in gel electrophoresis (SDS-PAGE) around 60 kDa, which is in the same molecular weight range as the biosynthesizing enzyme GBSS I present in starch granules. The proteins apparently phase separated during film formation and migrated to the surface, resulting in an extensive enrichment of proteins in the film surface, where about 8% of the protein is present in the top 0.01% of the film. We believe that the protrusions observed with AFM could be one or a few proteins aggregated side by side.     

FT-IR microspectroscopy for microbiological studies

In this article we present an infrared microspectroscopic investigation on Candida albicans microcolonies, taken as a model system for studies on other microorganisms. Excellent Fourier transform infrared (FT-IR) absorption spectra from 4000 to 850 cm(-1) have been collected in only 20 s from sampling areas of 100x100 microm(2) in microcolonies, which had been transferred from the agar plate onto zinc selenide (ZnSe) windows. When different regions within a single microcolony were investigated, absorption spectra with important differences in the carbohydrate absorption (from 1200 to 850 cm(-1)) were detected for the cells in the center and in the periphery of the colony. Results obtained on microcolonies grown on solid agar with increasing dextrose concentrations indicated that the observed spectral heterogeneity was related to differences in dextrose uptake, which was lower for the old cells in the center of the colony than for the metabolically active cells at the periphery. Although it is otherwise difficult to quantitatively evaluate the dextrose uptake in a microcolony, FT-IR absorption microspectroscopy offers a new and rapid method for the analysis of this process. The possibility of studying highly absorbing colonies by attenuated total reflection (ATR) by means of an ATR microscope germanium objective is also presented here for the first time. An evaluation of the contact area sampled by this technique is reported with a discussion of the spatial resolution, the quality and the potential of the ATR measurements.     

PEM Anchorage on Titanium Using Catechol Grafting

Background

This study deals with the anchorage of polyelectrolyte films onto titanium surfaces via a cathecol-based linker for biomedical applications.

Methodology

The following study uses a molecule functionalized with a catechol and a carboxylic acid: 3-(3,4-dihydroxyphenyl)propanoic acid. This molecule is anchored to the TiO₂ substrate via the catechol while the carboxylic acid reacts with polymers bearing amine groups. By providing a film anchorage of chemisorption type, it makes possible to deposit polyelectrolytes on the surface of titanium.

Principal Findings

Infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), contact angle and atomic force microscopy (AFM) measurements show that the different steps of grafting have been successfully performed.

Conclusions

This method based on catechol anchorage of polyelectrolytes open a window towards large possibilities of clinical applications.     

Model system for growing and quantifying Streptococcus pneumoniae biofilms in situ and in real time

Streptococcus pneumoniae forms biofilms, but little is known about its extracellular polymeric substances (EPS) or the kinetics of biofilm formation. A system was developed to enable the simultaneous measurement of cells and the EPS of biofilm-associated S. pneumoniae in situ over time. A biofilm reactor containing germanium coupons was interfaced to an attenuated total reflectance (ATR) germanium cell of a Fourier transform infrared (FTIR) laser spectrometer. Biofilm-associated cells were recovered from the coupons and quantified by total and viable cell count methods. ATR-FTIR spectroscopy of biofilms formed on the germanium internal reflection element (IRE) of the ATR cell provided a continuous spectrum of biofilm protein and polysaccharide (a measure of the EPS). Staining of the biofilms on the IRE surface with specific fluorescent probes provided confirmatory evidence for the biofilm structure and the presence of biofilm polysaccharides. Biofilm protein and polysaccharides were detected within hours after inoculation and continued to increase for the next 141 h. The polysaccharide band increased at a substantially higher rate than did the protein band, demonstrating increasing coverage of the IRE surface with biofilm polysaccharides. The biofilm total cell counts on germanium coupons stabilized after 21 h, at approximately 10(5) cells per cm(2), while viable counts decreased as the biofilm aged. This system is unique in its ability to detect and quantify biofilm-associated cells and EPS of S. pneumoniae over time by using multiple, corroborative techniques. This approach could prove useful for the study of biofilm processes of this or other microorganisms of clinical or industrial relevance.     

A simple route to fabricate controllable and stable multilayered all-MWNTs films and their applications for the detection of NADH at low potentials

This study demonstrates a polyelectrolyte-free method to fabricate controllable and stable all-MWNTs films via a covalent layer-by-layer (LBL) deposition. Aminated MWNTs and carboxylated MWNTs were prepared by surface functionalization, allowing the incorporation of MWNTs into highly tunable thin films through the formation of covalent amide bonds. Fourier transform infrared spectroscopy (FTIR) analysis demonstrated the formation of covalent linkages between MWNTs layers. Scanning electron microscopy (SEM) and ultraviolet-visible spectroscopy (UV-vis) were used to characterize the assembly process. Electrochemical studies indicated that the all-MWNTs film possessed a remarkable electrocatalytic activity toward dihydronicotinamide adenine dinucleotide (NADH) at relatively low potentials, without the need for redox mediators. The film thickness and the amount of assembled MWNTs were readily adjusted by simply changing the number of cycles in the LBL assembly process, which also effectively tuned the electrocatalytic activity of the film toward NADH. The film constructed with four bilayers showed a high sensitivity of 223.8μAmM(-1)cm(-2) and a detection limit of 1.5μM, with a fast response of less than 3s. Furthermore, the all-MWNTs film also showed good selectivity and excellent stability for the determination of NADH.     

Infrared absorbance spectroscopy of aqueous proteins: Comparison of transmission and ATR data collection and analysis for secondary structure fitting

Attenuated total reflectance (ATR) infrared absorbance spectroscopy of proteins in aqueous solution is much easier to perform than transmission spectroscopy, where short path‐length cells need to be assembled reproducibly. However, the shape of the resulting ATR infrared spectrum varies with the refractive index of the sample and the instrument configuration. Refractive index in turn depends on the absorbance of the sample. In this work, it is shown that a room temperature triglycine sulfate detector and a ZnSe ATR unit can be used to collect reproducible spectra of proteins. A simple method for transforming the protein ATR spectrum into the shape of the transmission spectrum is also given, which proceeds by approximating a Kramers‐Krönig–determined refractive index of water as a sum of four linear components across the amide I and II regions. The light intensity at the crystal surface (with 45° incidence) and its rate of decay away from the surface is determined as a function of the wave number–dependent refractive index as well as the decay of the evanescent wave from the surface. The result is a single correction factor at each wave number. The spectra were normalized to a maximum of 1 between 1600 cm^?1 and 1700 cm^?1 and a self‐organizing map secondary structure fitting algorithm, SOMSpec, applied using the BioTools reference set. The resulting secondary structure estimates are encouraging for the future of ATR spectroscopy for biopharmaceutical characterization and quality control applications.     

Attenuated total reflection Fourier transform infrared studies of redox changes in bovine cytochrome c oxidase: resolution of the redox Fourier transform infrared difference spectrum of heme a(3).

Attenuated total reflection Fourier transform infrared (ATR-FTIR) difference spectroscopy has been performed on samples of bovine cytochrome c oxidase that have been deposited as a thin film on the surface of a silicon microprism. The technique has several advantages over transmission methods in terms of amount of material required, the time required to reach sufficient optical stability, and the range of reactants that can be repetitively added and removed. The ATR-FTIR method has been used to record redox difference spectra of cytochrome c oxidase in the unligated and cyanide-ligated states. By subtraction of the spectra, the redox FTIR difference spectrum of heme a(3) can be resolved from those of the other metal centers. This difference spectrum is compared with available vibrational and Raman data on homologous oxidases and on heme A model compounds.     

Characterization of bioscoured cotton fabrics using FT-IR ATR spectroscopy and microscopy techniques

The effects of bioscouring were investigated by characterizing the chemical and physical surface changes of cotton fabrics using a purified pectinase enzyme from Bacillus subtilis strain WSHB04-02. Fourier-transform infrared (FT-IR) attenuated total-reflectance (ATR) spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) techniques were employed. FT-IR ATR spectroscopy provided a fast and semi-quantitative assessment of the removal of pectins and/or waxes on the cotton surface by comparing the changes in intensity of the carbonyl peak induced by HCl vapor treatment at around 1736 cm(-1). The bioscoured surface could be clearly distinguished from those of untreated and alkali-treated cotton fibers using a combination of SEM and AFM. The images produced using these techniques revealed that the surface morphography and topography of the cotton fibers were shaped by the etching action mode of pectinases during bioscouring. These findings demonstrated that AFM is a useful supplement to SEM in characterizing cotton surfaces.     

Spectroscopic imaging of arteries and atherosclerotic plaques

Fourier transform infrared (FTIR) spectroscopic imaging using a focal plane array detector has been used to study atherosclerotic arteries with a spatial resolution of 3-4 microm, i.e., at a level that is comparable with cellular dimensions. Such high spatial resolution is made possible using a micro-attenuated total reflection (ATR) germanium objective with a high refractive index and therefore high numerical aperture. This micro-ATR approach has enabled small structures within the vessel wall to be imaged for the first time by FTIR. Structures observed include the elastic lamellae of the tunica media and a heterogeneous distribution of small clusters of cholesterol esters within an atherosclerotic lesion, which may correspond to foam cells. A macro-ATR imaging method was also applied, which involves the use of a diamond macro-ATR accessory. This study of atherosclerosis is presented as an illustrative example of the wider potential of these ATR imaging approaches for cardiovascular medicine and biomedical applications.     

Identification of a Cd2+- and Zn2+-binding site in cytochrome c using FTIR coupled to an ATR microdialysis setup and NMR spectroscopy

Fourier transform infrared (FTIR) difference spectroscopy allows the study of molecular changes occurring at active sites in proteins with high sensitivity. Reactions are triggered by light, potential, or temperature steps and more recently by the diffusion of buffers containing effectors above membrane proteins deposited as films on ATR crystals. We have adapted a microdialysis system to an ATR, to study metal sites in soluble proteins. In this study, we identified a Cd(2+)- or Zn(2+)-binding site in cytochrome c with dissociation constants of 17 and 42 microM, respectively, which affects the oxidation rate of ferrocytochrome c by hydrogen peroxide. Using the microdialysis ATR-FTIR setup, we determined that a histidine and the carboxylate group of a glutamate are involved in Zn(2+) binding. The implication of His 33 and Glu 104 in the binding site was deduced from the comparison of FTIR data recorded with horse heart and the variant tuna cytochrome c lacking these two amino acids. A two-dimensional NMR analysis of the Zn(2+)-binding site in horse heart cytochrome c confirmed that His 33 and residues close to the C terminus are sensitive to Zn(2+) binding. This study demonstrates that the microdialysis ATR-FTIR setup is promising for the analysis of metal sites in proteins. From H(2)O/(2)H(2)O exchange experiments, we concluded that the impact of Zn(2+) and Cd(2+) binding on the oxidation kinetics of ferrocytochrome c by H(2)O(2) is associated to the perturbation of a hydrogen-bonding network involving His 33 that is sensitive to the redox state of cytochrome c.     

Mediation of a phase transition in hyaluronate films by the counterions Li, Cs, Mg and Ca as observed by infrared spectroscopy, optical microscopy and optical birefringence

Infrared (IR) spectroscopy and optical microscopy have been performed as a function of relative humidity (rh) on wet-spun oriented films of hyaluronate (HA) prepared with various counterions. Complete swelling measurements have been obtained through optical microscopy for films of Cs-, Mg-, and CaHA. IR spectroscopy of Cs-, Mg-, Ca-, and LiHA films was performed for skeletal vibrations (800-1000 cm(-1)) and for vibrational modes (1150-1300 cm(-1)) attributed to C-C and C-O stretching modes and C-C-H and C-O-H bending modes. These techniques reveal evidence of a counterion-dependent phase transition occuring at high relative humidities. Optical birefringence measurements on the polycrystalline samples showed order before and disorder after the transition from lower to higher humidity.     

Stimuli-responsive surfactant/phospholipid stabilized colloidal dispersions and their film formation

Methyl methacrylate (MMA) and n-butyl acrylate (nBA) were copolymerized into stable colloidal particles in the presence of micelle forming sodium dioctyl sulfosuccinate (SDOSS) and liposome forming 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) in aqueous media that serve as thermodynamically stable loci for lipophilic monomers and nanostructured templates. These studies show for the first time that hollow colloidal particles may coalesce to form polymeric films and the combination of SDOSS and DLPC dispersing agents provides a stimuli-responsive environment during film formation through which individual surface stabilizing components can be driven to the film-air (F-A) or film-substrate (F-S) interface. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) of p-MMA/nBA colloidal dispersions revealed preferential and enhanced mobility of SDOSS and DLPC lipid rafts to the F-A and F-S interfaces in response to thermal, ionic, and enzymatic stimuli.     

A technique for monitoring mammalian cell growth and inhibition in situ via Fourier transform infrared spectroscopy

A single culture of Chinese hamster ovary cells was grown on germanium attenuated total reflectance (ATR) crystals and continuously monitored in situ via ATR/Fourier transform infrared (FT-IR) spectroscopy for approximately 60 h. The cells were seeded into a specially designed flow cell which controlled physiological conditions, flow rate, and addition of growth medium or metabolic inhibitors. Infrared spectra were taken at 20-min intervals until a confluent monolayer was formed. Several strong bands are evident in the spectra which can be generally ascribed to molecular features of cellular components. Cell growth kinetics were measured as a function of infrared band intensity over time and exhibited the normal lag phase, logarithmic growth, and stationary phase on reaching confluence. Spectra of growing cells, normalized to the area under the spectral region 1800-1000 cm-1, were subtracted from reference spectra of confluent cells at 60 h. Difference spectra showed that the largest differences were observed between confluent cells and cells in early growth stages. Differences may reflect cell morphological changes, biochemical activity, and degree of ATR crystal exposure to the bulk medium. ATR/FT-IR spectroscopy of living Chinese hamster ovary cells was also used in a toxicological study to monitor the effects of hydroxyurea, an inhibitor of DNA synthesis. Delayed growth was observed in the cell growth curve of the hydroxyurea-treated cells during the course of treatment as compared to the control culture.