Polarization-Independent Reconfigurable Graphene Gas Sensor Using Crescent Plasmonic Antenna

Plasmonics - A polarization-independent gas sensor based on crescent plasmonic dipole antenna loaded with graphene monolayer is introduced in this paper for environment...     

High-quality Temperature Sensor Based on the Plasmonic Resonant Absorber

Plasmonics - Aiming at the achievement of temperature measurement with high sensitivity in the sub-wavelength scale, an all-metal meta-surface (AMMS)-based sensor is numerically demonstrated. Based...     

A Tunable Plasmonic Refractive Index Sensor with Ultrabroad Sensing Range for Cancer Detection

Plasmonics - Contribution of quantum dots (QDs) and nano dots (NDs) in boosting the plasmonic behavior of noble metal nano cavity structure and its refractive index (RI) sensing is...     

Plasmonic Sensor Based on Silver Nanoparticles for the Detection of Glucose

Plasmonics - Sensors for detecting glucose concentrations are crucial to medical testing. Here, we introduce silver nanoparticles (Ag NPs) uniformly distributed in space to investigate the sensing...     

Simple and Improved Plasmonic Sensor Configuration Established on MIM Waveguide for Enhanced Sensing Performance

Plasmonics - Herein, two simple configurations of Fano resonance-based plasmonic sensors are proposed for temperature and biosensing applications. The device optimization and sensing performance...     

Dipole-Nano-Laser Based Plasmonic Nano-Sensor for Sensing Photons and Bio-Chemical Analytes

We propose a new type of plasmonic nano-sensors that is based on the concept of the dipole nano laser (DNL). The DNL is made of a quantum dot (QD) coupled to a nano particle (NP). The very small size of the DNL renders the sensor one of the smallest proposed in literature. The system is embedded within a photonic band gap (PBG) material. The PBG material is shown to greatly narrow the DNL spectral width, which translates into a high and accurate sensibility for the proposed plasmonic nano sensor. The proposed system configuration can easily be adjusted to detect either photons or bio-chemical analytes.     

Ultrasmall Plasmonic Cavity for Chemical Sensing

We propose an ultrasmall plasmonic cavity based on the channel waveguides for chemical sensing. The plasmonic mode gap due to cutoff angular frequency enables strong optical confinement in a subwavelength volume and suppression of radiation loss. Due to strong field overlap of the surface plasmon polariton mode with environmental material, large sensitivity (1,100 nm/refractive index unit) and a high figure of merit (330) are achieved in the plasmonic cavity with a small physical size of 600?×?800?×?2,500 nm having a telecommunication resonant wavelength. This plasmonic cavity can introduce a broad range of applications including biochemical sensing and strong light–matter interactions.     

Refractive-Index Sensing with Ultrathin Plasmonic Nanotubes

We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive an analytical expression for the extinction cross section and show how sensing of the refractive index of the surrounding medium and the figure of merit are affected by the shape and size of the nanotubes. Comparison with other localized surface plasmon resonance sensors reveals that the nanotube exhibits superior sensitivity and comparable figure of merit.     

Fabrication Friendly Plasmonic Metasurface Sensing and Switching Configuration Based on Plasmonic Induced Absorption: Analytical and Numerical Evaluation

Plasmonics - Optical sensing and switching characteristic for a novel plasmonic metasurface structure are verified based on numerical and analytical evaluations for the proposed structure formed by...     

Highly Sensitive Plasmonic Temperature Sensor Based on Photonic Crystal Surface Plasmon Waveguide

We propose a highly sensitive temperature sensor based on photonic crystal surface plasmon waveguides comprising different plasmonic active metals such as gold, silver, and aluminum, utilizing surface plasmon resonance phenomenon. We found that the resonance wavelength can be easily and substantially tuned over a broad spectral range by changing the temperature and also by judiciously choosing the different plasmonic metals. Employing coupled mode theory, we found that the proposed sensor can be used in harsh environment with sensitivity as high as ～70 pm/K around telecommunication window.     

Highly Sensitive Biochemical Sensor Based on Two-Layer Dielectric Loaded Plasmonic Microring Resonator

In this paper, we propose and design a highly sensitive optical biochemical sensor based on two-layer dielectric loaded surface plasmon polariton waveguide (TDLSPPW)-based microring resonator (MRR). By optimizing the structure parameters, the propagation length of the proposed waveguide is ~126 μm, which is about 3 times of that of the polymer dielectric loaded surface plasmon polariton waveguide (DLSPPW) reported. It is demonstrated that the TDLSPPW-based MRR is operated at the under-coupling state, along with the quality factor (Q) of 541.2 and extinction ratio (ER) of 12.2 dB. Moreover, the Q and ER are much more sensitive to the structure parameters of the waveguide, including the waveguide width w, total thickness t, and coupling gap W _gap, compared to the low refractive index (RI) layer thickness t ₂. The simulation results on the biochemical RI sensing show that the sensitivities of 408.7 and 276.4 nm/RIU for glucose concentration in urine and chemical gases can be achieved, respectively. It is believed that the proposed sensor has potential applications in photonic-integrated biochemical sensing.     

Template-Stripping Fabricated Plasmonic Nanogratings for Chemical Sensing

Plasmonics - Template stripping has been applied to transfer one-dimensional nanograting structures fabricated by interference lithography (IL) onto planar supports (i.e., glass slides and...     

Coupled Mode Demonstration of Slow-Light Plasmonic Sensor Based on Metasurface at Near-Infrared Region

In this paper, we theoretically and numerically reported a dual plasmon-induced transparency and the relevant sensing property in a multi-cross metasurface by the coupled mode analysis. A phase coupling model was established to characterize the optical response of this plasmonic sensor. It was found that the transparency windows were sensitive to the resonance mode of each metal strip, which was well demonstrated by the theoretical model. Both the sensing property and the slow light in this structure were discussed. A high figure of merit of 223 and sensitivity of 850 nm/RIU were achieved. In addition, the 1170-nm near-infrared light can be slowed down by nearly two order of magnitude with group delay of 0.45 ps in this sensor. These results may provide guidance for light-matter interaction-enhanced slow-light sensor and integrated optical circuit design.

     

Modulating Plasmonic Sensor with Graphene-Based Silicon Grating

We propose a modulating plasmonic structure device which is composed of a single layer graphene above the silicon Bragg grating with the silica spacer layer. This graphene-based plasmonic modulation provides a broad stop-band with high tunability in the mid-infrared region of the transmission spectra achieved by altering the geometrical parameters of the silicon grating and the gate voltage. By engineering, a phase discontinuity into the graphene-based Bragg grating, we can selectively open a transmission window in the previous stop-band spectra. These proposed graphene-based structures are easy to fabricate and operate, which have potential applications as ultra-compact high-sensitivity sensors.     

Intracellular Localized Surface Plasmonic Sensing for Subcellular Diagnosis

This paper proposes a method for diagnosing intracellular conditions and organelles of cells with localized surface plasmonic resonance (LSPR) by directly internalizing the gold nanoparticles (AuNPs) into the cells and measuring their plasmonic properties through hyperspectral imaging. This technique will be useful for direct diagnosis of cellular organelles, which have potential for cellular biology, proteomics, pharmaceuticals, drug discovery etc. Furthermore, localization and characterization of citrate-capped gold nanoparticles in HeLa cells were studied, by hyperspectral microscopy and other imaging techniques. Here, we present the method of internalizing the gold nanoparticles into the cells and subcellular organelles to facilitate subcellular plasmonic measurements. An advanced label-free visualization technique, namely hyperspectral microscopy providing images and spectral data simultaneously, was used to confirm the internalization of gold nanoparticles and to reveal their optical properties for possible intracellular plasmonic detection. Hyperspectral technology has proved to be effective in the analysis of the spectral profile of gold nanoparticles, internalized under different conditions. Using this relatively novel technique, it is possible to study the plasmonic properties of particles, localized in different parts of the cell. The position of the plasmon bands reflects the interactions of gold nanoparticles with different subcellular systems, including particle-nucleus interactions. Our results revealed the effect of the different intracellular interactions on the aggregation pattern of gold nanoparticles, inside the cells. This novel technique opens the door to intracellular plasmonics, an entirely new field, with important potential applications in life sciences. Similarly, the characterization of AuNP inside the cell was validated using traditional methods such as light microscopy and scanning electron microscopy. Under the conditions studied in this work, gold nanoparticles were found to be non-toxic to HeLa (cervical cancer) cells.     

Highest Efficiency Plasmonic Polycrystalline Silicon Thin-Film Solar Cells by Optimization of Plasmonic Nanoparticle Fabrication

Excitation of surface plasmons in metallic nanoparticles is a promising method for increasing the light absorption in solar cells and hence the cell photocurrent. Comprehensive optimization of a nanoparticle fabrication process for enhanced performance of polycrystalline silicon thin-film solar cells is presented. Three factors were studied: the Ag precursor film thickness, annealing temperature and time. The thickness of the precursor film was 10, 14 and 20 nm; annealing temperature was 190, 200, 230 and 260 °C; and annealing time was varied between 20 and 95 min. Performance enhancement due to light-scattering by nanoparticles was calculated by comparing absorption, short-circuit current density and energy conversion efficiency in solar cells with and without nanoparticles formed under different process conditions. Nanoparticles formed from 14-nm-thick Ag precursor film annealed at 230 °C for 53 min result in the highest absorption enhancement in the 700–1,100 nm wavelength range, in the highest enhancement of total short-circuit current density. The highest photocurrent enhancement was 33.5 %, which was achieved by the cell with the highest absorption enhancement in the 700–1,100 nm range. The plasmonic cell efficiency of 5.32 % was achieved without a back reflector and 5.95 % with the back reflector; which is the highest reported efficiency for plasmonic thin-film solar cells.     

Sensing Performance of the Bragg Fiber-Based Plasmonic Sensors with Four Layers

Plasmonics - We report the application of the analytical and finite element methods to the analysis of the sensing performance for the Bragg fiber-based plasmonic sensors having four layers. The...     

A High Performance Plasmonic Sensor Based on Metal-Insulator-Metal Waveguide Coupled with a Double-Cavity Structure

A high performance plasmonic sensor based on a metal-insulator-metal (MIM) waveguide coupled with a double-cavity structure consisting of a side-coupled rectangular cavity and a disk cavity is proposed. The transmission characteristics of the rectangular cavity and disk cavity are analyzed theoretically and the improvements of performance for the double-cavity structure compared with a single cavity are studied. The influence of structural parameters on the transmission spectra and sensing performance are investigated in detail. A sensitivity of 1136 nm/RIU with a high figure of merit of 51,275 can be achieved at the resonant wavelength of 1148.5 nm. Due to the high performance and easy fabrication, the proposed structure may be applied in integrated optical circuits and on-chip nanosensors.     

Sensitive and Robust Colorimetric Sensing of Sulfide Anion by Plasmonic Nanosensors Based on Quick Crystal Growth

A highly sensitive and selective method for colorimetric sensing of sulfide anions in aqueous solutions is illustrated. The sensing mechanism is based on quick crystallization from Ag to Ag₂S in the presence of sulfide anions which alter the dielectric properties of the Au/Ag core/shell nanorods. The longitudinal surface plasmon resonance peak of the Au/Ag nanorods at about 686 nm undergoes a redshift and the color of the nanorod solution also changes from light green to purple. Sulfide ions at a concentration of 4.0 μM (1.3 ppb) can be detected visually and a sensitivity of 0.5 μM (167 ppt) is achieved by Vis–near-infrared spectrophotometry. Compared to other plasmonic sensors, our Au/Ag nanorod probe does not require surface modification while exhibiting high stability and robustness under different pH conditions. This simple and cost-effective sensing platform provides a rapid and convenient detection for sulfide anions at concentrations far below the hazardous limit in aqueous media.