ULTRASTRUCTURAL LOCALIZATION OF MINERAL MATTER IN BACTERIAL SPORES BY MICROINCINERATION

The fine localization of mineral matter in spores of Bacillus megaterium and Bacillus cereus was studied by the technique of microincineration adapted for use with the electron microscope. The specimens, which included intact and thin-sectioned spores as well as shed spore coats, were burned either in the conventional way at high temperature or by a new technique using electrically excited oxygen at nearly room temperature. The ash residues were examined by bright field, dark field, and diffraction in the electron microscope and also with the phase contrast microscope. In some cases, the specimen was previewed in both microscopes before incineration. The results do not support a previous report that the mineral elements of the spore are confined to a peripheral layer, but rather indicate that the spore core as well as the coat are mineral-rich. The cortex may be deficient in minerals, but the possibility of artifact prevents a clear decision on this point. Incinerated B. megaterium spores show a highly ordered fine structure displaying 100 A periodicity in the ash of the middle layer of the coat. The nature of this structure is discussed, as is the technique which demonstrated it. The fine definition of the ash patterns, particularly those obtained with the low-temperature, excited-oxygen technique, suggests that microincineration may be generally useful in the study of fine structure.     

Role of dipicolinic acid in survival of Bacillus subtilis spores exposed to artificial and solar UV radiation

Pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) constitutes approximately 10% of Bacillus subtilis spore dry weight and has been shown to play a significant role in the survival of B. subtilis spores exposed to wet heat and to 254-nm UV radiation in the laboratory. However, to date, no work has addressed the importance of DPA in the survival of spores exposed to environmentally relevant solar UV radiation. Air-dried films of spores containing DPA or lacking DPA due to a null mutation in the DPA synthetase operon dpaAB were assayed for their resistance to UV-C (254 nm), UV-B (290 to 320 nm), full-spectrum sunlight (290 to 400 nm), and sunlight from which the UV-B portion was filtered (325 to 400 nm). In all cases, air-dried DPA-less spores were significantly more UV sensitive than their isogenic DPA-containing counterparts. However, the degree of difference in UV resistance between the two strains was wavelength dependent, being greatest in response to radiation in the UV-B portion of the spectrum. In addition, the inactivation responses of DPA-containing and DPA-less spores also depended strongly upon whether spores were exposed to UV as air-dried films or in aqueous suspension. Spores lacking the gerA, gerB, and gerK nutrient germination pathways, and which therefore rely on chemical triggering of germination by the calcium chelate of DPA (Ca-DPA), were also more UV sensitive than wild-type spores to all wavelengths tested, suggesting that the Ca-DPA-mediated spore germination pathway may consist of a UV-sensitive component or components.     

Role of Dipicolinic Acid in Survival of Bacillus subtilis Spores Exposed to Artificial and Solar UV Radiation

Pyridine-2,6-dicarboxylic acid (dipicolinic acid [DPA]) constitutes approximately 10% of Bacillus subtilis spore dry weight and has been shown to play a significant role in the survival of B. subtilis spores exposed to wet heat and to 254-nm UV radiation in the laboratory. However, to date, no work has addressed the importance of DPA in the survival of spores exposed to environmentally relevant solar UV radiation. Air-dried films of spores containing DPA or lacking DPA due to a null mutation in the DPA synthetase operon dpaAB were assayed for their resistance to UV-C (254 nm), UV-B (290 to 320 nm), full-spectrum sunlight (290 to 400 nm), and sunlight from which the UV-B portion was filtered (325 to 400 nm). In all cases, air-dried DPA-less spores were significantly more UV sensitive than their isogenic DPA-containing counterparts. However, the degree of difference in UV resistance between the two strains was wavelength dependent, being greatest in response to radiation in the UV-B portion of the spectrum. In addition, the inactivation responses of DPA-containing and DPA-less spores also depended strongly upon whether spores were exposed to UV as air-dried films or in aqueous suspension. Spores lacking the gerA, gerB, and gerK nutrient germination pathways, and which therefore rely on chemical triggering of germination by the calcium chelate of DPA (Ca-DPA), were also more UV sensitive than wild-type spores to all wavelengths tested, suggesting that the Ca-DPA-mediated spore germination pathway may consist of a UV-sensitive component or components.     

Bacterial spore heat resistance correlated with water content, wet density, and protoplast/sporoplast volume ratio.

Five types of dormant Bacillus spores, between and within species, were selected representing a 600-fold range in moist-heat resistance determined as a D100 value. The wet and dry density and the solids and water content of the entire spore and isolated integument of each type were determined directly from gram masses of material, with correction for interstitial water. The ratio between the volume occupied by the protoplast (the structures bounded by the inner pericytoplasm membrane) and the volume occupied by the sporoplast (the structures bounded by the outer pericortex membrane) was calculated from measurements made on electron micrographs of medially thin-sectioned spores. Among the various spore types, an exponential increase in the heat resistance correlated directly with the wet density and inversely with the water content and with the protoplast/sporoplast volume ratio. Altogether with results supported a hypothesis that the extent of heat resistance is based in whole or in part on the extent of dehydration and diminution of the protoplast in the dormant spore, without implications about physiological mechanisms for attaining this state.     

Research on the early stages of spore germination in <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> using dynamic phase microscopy

The changes in the state of Bacillus subtilis spores that occur during germination were analyzed using dynamic phase microscopy (DPM). DPM is based on monitoring and analyzing the interference image of a specimen in a coherent laser beam. The optical path difference (the phase thickness of the specimen, PT) depends on the geometrical height of the specimen and its refractive index. We demonstrated that the maximum PT value is a convenient criterion of the physiological state of the organism involved: PT is ≥ 80 nm, ～40–50 nm, and ≤ 20 in dormant, developing (initiated), and heat-killed spores, respectively. We established that (i) heating a spore suspension to 40°C results in a reversible twofold decrease (from 80 to 40 nm) in their PT under conditions that do not promote the development of the bacteria; this decrease is irreversible under growth-promoting conditions; (ii) the PT values of germinating spores oscillate with a considerable fluctuation amplitude (up to 7 nm), in contrast to the limited fluctuation amplitude (within 1 nm) in dormant spores; (iii) activated spores were heterogenous with respect to the PT pattern: a majority of the spores exhibited a usual spatial profile (with a maximum thickness in the center), whereas a minor fraction of them were characterized by an erythrocyte-like profile with a concave center; this implies that the central zone of the spore was more rapidly hydrated (with a decrease in refractive index) than the peripheral zone.     

Streptomyces viridochromogenes spore germination initiated by calcium ions.

Initiation of germination of heat-activated Streptomyces viridochromogenes spore occurs in media containing only calcium ions and organic buffer. The calcium-induced initiation of germination was accompanied by a decrease in absorbance of the spore suspension, an increased rate of endogenous metabolism, the loss of spore carbon, and the loss of heat resistance. Calcium amounts to 0.28% of the dry weight of freshly harvested spores. The amount of calcium remained the same after incubation of spores in water after heat activation. The spore content of calcium doubled after incubation in 0.5 mM CaCl2 for 5 min at 4 degrees C and during calcium-induced germination. Nearly all of the calcim appears to be bound to sites external to the spore membrane, since the chelating agents (ethylenedinitrilo) tetraacetic acid and arsenazo III removed virtually all of the calcium ions. The calcium ions must be present during the entire initiation of germination period. Germination ceases after an (ethylenedinitrilo) tetraacetic acid wash and begins again immediately after addition of calcium ions.     

Localization of low-molecular-weight basic proteins in Bacillus megaterium spores by cross-linking with ultraviolet light.

Two low-molecular-weight basic proteins, termed A and B proteins, comprise about 15% of the protein of dormant spores of Bacillus megaterium. Irradiation of intact dormant spores with ultraviolet light results in covalent cross-linking of the A and B proteins to other spore macromolecules. The cross-linked A and B proteins are precipitated by ethanol and can be solubilized by treatment with deoxyribonuclease (75%) or ribonuclease (25%). Irradiation of complexes formed in vitro between deoxyribonucleic acid (DNA) or ribonucleic acid and a mixture of the low-molecular-weight basic proteins from spores also resulted in cross-linking of A and B proteins to nucleic acids. The dose-response curves for formation of covalent cross-links were similar for irradiation of both a protein-DNA complex in vitro and intact spores. However, if irradiation was carried out in vitro under conditions where DNA-protein complexes were disrupted, no covalent cross-links were formed. These data suggest that significant amounts of the low-molecular-weight basic proteins unique to bacterial spores are associated with spore DNA in vivo.     

Research on the early stages of spore germination in Bacillus subtilis using dynamic phase microscopy

The changes in the state of Bacillus subtilis spores that occur during germination were analyzed using dynamic phase microscopy (DPM). DPM is based on monitoring and analyzing the interference image of a specimen in a coherent laser beam. The optical path difference (the phase thickness of the specimen, PT) depends on the geometrical height of the specimen and its refractive index. We demonstrated that the maximum PT value is a convenient criterion of the physiological state of the organism involved: PT is > or = 80 nm, 40-50 nm, and < or = 0 in dormant, developing (initiated), and heat-killed spores, respectively. We established that (i) heating a spore suspension to 40 degrees C results in a reversible twofold decrease (from 80 to 40 nm) in their PT under conditions that do not promote the development of the bacteria; this decrease is irreversible under growth-promoting conditions; (ii) the PT values of germinating spores oscillate with a considerable fluctuation amplitude (up to 7 nm), in contrast to the limited fluctuation amplitude (within 1 nm) in dormant spores; (iii) activated spores were heterogenous with respect to the PT pattern: a majority of the spores exhibited a usual spatial profile (with a maximum thickness in the center), whereas a minor fraction of them were characterized by an erythrocyte-like profile with a concave center; this implies that the central zone of the spore was more rapidly hydrated (with a decrease in refractive index) than the peripheral zone.     

Endotrophic calcium, strontium, and barium spores of Bacillus megaterium and Bacillus cereus

Foerster, Harold F. (The University of Texas, Austin), and J. W. Foster. Endotrophic calcium, strontium, and barium spores of Bacillus megaterium and Bacillus cereus. J. Bacteriol. 91:1333-1345. 1966.-Spores were produced by washed vegetative cells suspended in deionized water supplemented with CaCl(2), SrCl(2), or BaCl(2). Normal, refractile spores were produced in each case; a portion of the barium spores lost refractility and darkened. Thin-section electron micrographs revealed no apparent anatomical differences among the three types of spores. Analyses revealed that the different spore types were enriched specifically in the metal to which they were exposed during sporogenesis. The calcium content of the strontium and the barium spores was very small. From binary equimolar mixtures of the metal salts, endotrophic spores accumulated both metals to nearly the same extent. Viability of the barium spores was considerably less than that of the other two types. Strontium and barium spores were heat-resistant; however, calcium was essential for maximal heat resistance. Significant differences existed in the rates of germination; calcium spores germinated fastest, strontium spores were slower, and barium spores were slowest. Calcium-barium and calcium-strontium spores germinated readily. Endotrophic calcium and strontium spores germinated without the prior heat activation essential for growth spores. Chemical germination of the different metal-type spores with n-dodecylamine took place at the same relative rates as physiological germination. Heat-induced release of dipicolinic acid occurred much faster with barium and strontium spores than with calcium spores. The washed "coat fraction" from disrupted spores contained little of the spore calcium but most of the spore barium. The metal in this fraction was released by dilute acid. The demineralized coats reabsorbed calcium and barium at neutral pH.     

Effect of microwave radiation on Bacillus subtilis spores

AIMS: To compare the killing efficacy and the effects exerted by microwaves and conventional heating on structural and molecular components of Bacillus subtilis spores. METHODS AND RESULTS: A microwave waveguide applicator was developed to generate a uniform and measurable distribution of the microwave electric-field amplitude. The applicator enabled the killing efficacy exerted by microwaves on B. subtilis spores to be evaluated in comparison with conventional heating at the same temperature value. The two treatments produced a similar kinetics of spore survival, while remarkably different effects on spore structures were seen. The cortex layer of the spores subjected to conductive heating was 10 times wider than that of the untreated spores; in contrast, the cortex of irradiated spores did not change. In addition, the heated spores were found to release appreciable amounts of dipicolinic acid (DPA) upon treatment, while extracellular DPA was completely undetectable in supernatants of the irradiated spores. These observations suggest that microwave radiation may promote the formation of stable complexes between DPA and other spore components (i.e. calcium ions); thus, making any release of DPA from irradiated spores undetectable. Indeed, while a decrease in measurable DPA concentrations was not produced by microwave radiation on pure DPA solutions, a significant lowering in DPA concentration was detected when this molecule was exposed to microwaves in the presence of either calcium ions or spore suspensions. CONCLUSIONS: Microwaves are as effective as conductive heating in killing B. subtilis spores, but the microwave E-field induces changes in the structural and/or molecular components of spores that differ from those attributable only to heat. SIGNIFICANCE AND IMPACT OF THE STUDY: This study provides information on the effect of microwaves on B. subtilis spore components.     

Preliminary Observations on the Fine Structure of the Pansporoblast of Thelohania bracteata (Strickland, 1913) (Microsporida, Nosematidae) as Revealed by Freeze-Etching Electron Microscopy

SYNOPSIS. The ultrastructure of a microsporidan pansporoblast was observed with freeze-etching electron microscopy. The cross-fractured face of ovoid mature spores, with the upper part of the spore coat fractured off, revealed the spore membrane; the convex face had many small depressions and the concave face bore fine particles. In cross-section the spore-coat was highly laminated and about 0.5 μ in diameter.
In the cytoplasm of the pansporoblast, fluid-filled and finger-print-life profiles of vesicles were observed. The vesicles were approximately 180 nm in diameter and laminated, each lamella being about 15–18 nm thick. In addition to these vesicles, a population of elevations, each with an average diameter of 40 nm, was evenly distributed in the pansporoblast among the spores. No other cytoplasmic organelles were observed within the pansporoblast. The pansporoblast wall was about 15–19 nm thick with particles 15–18 nm in diameter on its outer surface.     

Inactivation of Bacillus endospores in envelopes by electron beam irradiation

The anthrax incidents in the United States in the fall of 2001 led to the use of electron beam (EB) processing to sanitize the mail for the U.S. Postal Service. This method of sanitization has prompted the need to further investigate the effect of EB irradiation on the destruction of Bacillus endospores. In this study, endospores of an anthrax surrogate, B. atrophaeus, were destroyed to demonstrate the efficacy of EB treatment of such biohazard spores. EB exposures were performed to determine (i) the inactivation of varying B. atrophaeus spore concentrations, (ii) a D10 value (dose required to reduce a population by 1 log10) for the B. atrophaeus spores, (iii) the effects of spore survival at the bottom of a standardized paper envelope stack, and (iv) the maximum temperature received by spores. A maximum temperature of 49.2 degrees C was reached at a lethal dose of approximately 40 kGy, which is a significantly lower temperature than that needed to kill spores by thermal effects alone. A D10 value of 1.53 kGy was determined for the species. A surface EB dose between 25 and 32 kGy produced the appropriate killing dose of EB between 11 and 16 kGy required to inactivate 8 log10 spores, when spore samples were placed at the bottom of a 5.5-cm stack of envelopes.     

Characterization of Clostridium perfringens spores that lack SpoVA proteins and dipicolinic acid

Spores of Clostridium perfringens possess high heat resistance, and when these spores germinate and return to active growth, they can cause gastrointestinal disease. Work with Bacillus subtilis has shown that the spore's dipicolinic acid (DPA) level can markedly influence both spore germination and resistance and that the proteins encoded by the spoVA operon are essential for DPA uptake by the developing spore during sporulation. We now find that proteins encoded by the spoVA operon are also essential for the uptake of Ca(2+) and DPA into the developing spore during C. perfringens sporulation. Spores of a spoVA mutant had little, if any, Ca(2+) and DPA, and their core water content was approximately twofold higher than that of wild-type spores. These DPA-less spores did not germinate spontaneously, as DPA-less B. subtilis spores do. Indeed, wild-type and spoVA C. perfringens spores germinated similarly with a mixture of l-asparagine and KCl (AK), KCl alone, or a 1:1 chelate of Ca(2+) and DPA (Ca-DPA). However, the viability of C. perfringens spoVA spores was 20-fold lower than the viability of wild-type spores. Decoated wild-type and spoVA spores exhibited little, if any, germination with AK, KCl, or exogenous Ca-DPA, and their colony-forming efficiency was 10(3)- to 10(4)-fold lower than that of intact spores. However, lysozyme treatment rescued these decoated spores. Although the levels of DNA-protective alpha/beta-type, small, acid-soluble spore proteins in spoVA spores were similar to those in wild-type spores, spoVA spores exhibited markedly lower resistance to moist heat, formaldehyde, HCl, hydrogen peroxide, nitrous acid, and UV radiation than wild-type spores did. In sum, these results suggest the following. (i) SpoVA proteins are essential for Ca-DPA uptake by developing spores during C. perfringens sporulation. (ii) SpoVA proteins and Ca-DPA release are not required for C. perfringens spore germination. (iii) A low spore core water content is essential for full resistance of C. perfringens spores to moist heat, UV radiation, and chemicals.     

Isolation and characterization of Bacillus megaterium mutants containing decreased levels of spore protease.

A proteolytic activity present in spores of Bacillus megaterium has previously been implicated in the initiation of hydrolysis of the A, B, and C proteins which are degraded during spore germination. Four mutants of B. megaterium containing 20 to 30% of the normal level of spore proteolytic activity have been isolated. Partial purification of the protease from wild-type spores by a reviewed procedure resulted in the resolution of spore protease activity on the A, B, and C proteins into two peaks--a major one (protease II) and a minor one (protease I). The protease mutants tested lacked active protease II. All of the mutants exhibited a decreased rate of degradation of the A, B, and C proteins during spore germination at 30 degrees C, but degradation of the proteins did occur. Degradation of the A, B, and C proteins during germination of the mutant spores was decreased neither by blockade of ATP production nor by germination at 44 degrees C. Initiation of spore germination was normal in all four mutants, and all four mutants went through outgrowth, grew, and sporulated normally in rich medium. Similarly, outgrowth of spores of two of the four mutants was normal in minimal medium at 30 degrees C. In the two mutants studied, the kinetics of loss of spore heat resistance and spore UV light resistance during germination were identical to those of wild-type spores. This indicates that the A, B, and C proteins alone are not sufficient to account for the heat or UV light resistance of the dormant spore.     

ExsY and CotY are required for the correct assembly of the exosporium and spore coat of Bacillus cereus

The exosporium-defective phenotype of a transposon insertion mutant of Bacillus cereus implicated ExsY, a homologue of B. subtilis cysteine-rich spore coat proteins CotY and CotZ, in assembly of an intact exosporium. Single and double mutants of B. cereus lacking ExsY and its paralogue, CotY, were constructed. The exsY mutant spores are not surrounded by an intact exosporium, though they often carry attached exosporium fragments. In contrast, the cotY mutant spores have an intact exosporium, although its overall shape is altered. The single mutants show altered, but different, spore coat properties. The exsY mutant spore coat is permeable to lysozyme, whereas the cotY mutant spores are less resistant to several organic solvents than is the case for the wild type. The exsY cotY double-mutant spores lack exosporium and have very thin coats that are permeable to lysozyme and are sensitive to chloroform, toluene, and phenol. These spore coat as well as exosporium defects suggest that ExsY and CotY are important to correct formation of both the exosporium and the spore coat in B. cereus. Both ExsY and CotY proteins were detected in Western blots of purified wild-type exosporium, in complexes of high molecular weight, and as monomers. Both exsY and cotY genes are expressed at late stages of sporulation.     

High calcium content in Streptomyces spores and its release as an early event during spore germination.

The metal ion content of spores of five Streptomyces species was studied. A general feature of this study was the finding of a very high calcium content (1.1 to 2.1% of the dry weight). Accumulation of calcium occurred preferentially during the sporulation process. Spore calcium was located in the integument fraction, and more than 95% of the calcium was removed from intact spores by ethylene glycol-bis(beta-aminoethyl ether)-N,N-tetraacetic acid. Several divalent cations (Mg2+, Mn2+, Zn2+, and Fe2+) which induced darkening of spores and loss of heat resistance also caused the release of calcium from spores. In addition, darkening of spores was blocked by metabolic inhibitors, whereas calcium excretion was not affected. Two different categories of events in the initiation of germination may be differentiated; first, calcium release from spores which is not energy dependent and is a consequence of triggering of germination by some divalent cations, and second, some other events including loss of heat resistance, loss of spore refractility, and a decrease in absorbance, with at least one energy-dependent step.     

Real space refinement of acto-myosin structures from sectioned muscle

We have adapted a real space refinement protocol originally developed for high-resolution crystallographic analysis for use in fitting atomic models of actin filaments and myosin subfragment 1 (S1) to 3-D images of thin-sectioned, plastic-embedded whole muscle. The rationale for this effort is to obtain a refinement protocol that will optimize the fit of the model to the density obtained by electron microscopy and correct for poor geometry introduced during the manual fitting of a high-resolution atomic model into a lower resolution 3-D image. The starting atomic model consisted of a rigor acto-S1 model obtained by X-ray crystallography and helical reconstruction of electron micrographs. This model was rebuilt to fit 3-D images of rigor insect flight muscle at a resolution of 7 nm obtained by electron tomography and image averaging. Our highly constrained real space refinement resulted in modest improvements in the agreement of model and reconstruction but reduced the number of conflicting atomic contacts by 70% without loss of fit to the 3-D density. The methodology seems to be well suited to the derivation of stereochemically reasonable atomic models that are consistent with experimentally determined 3-D reconstructions computed from electron micrographs.     

Fine structure of the knobby spore type of Streptomyces torulosus

The type strain of Streptomyces torulosus Lyons and Pridham (1971) was studied by scanning- and transmission electron microscope. Spore chains were formed in spirals by aerial mycelium. The spores were connected by nozzles in which small channels could be observed. The knobby ornamentations of the spores arised on a thin fibrous sheath, enveloping the spore chains. These irregular blunt projections, called knobs, had varying diameters of 100 to 250 nm. The base of the knob, consisting of globose to flattened electron dense material, was sitting directly on the sheath. It was covered by several small vesicles of the same material. Each hollow vesicle beared a thin bowlshaped shell of electron transparent material. In general, the cupular bowls and their supporting vesicles became easily depressed on their base, but not detached from the surface of the spores. This type of knobby spore ornamentation was suggested to be designated as a verrucate spore type.     

Killing of spores of Bacillus subtilis by tert-butyl hydroperoxide plus a TAML activator

AIMS: To determine the effectiveness of tert-butyl hydroperoxide (tBHP) plus the cationic surfactant cetyltrimethyl ammonium bromide (CTAB) and a tetra-amido macrocyclic ligand (TAML) activator in killing spores of Bacillus subtilis and the mechanisms of spore resistance to and killing by this reagent. METHODS AND RESULTS: Killing of spores of B. subtilis by tBHP was greatly stimulated by the optimum ratio of concentrations of a TAML activator (1.7 micromol l(-1)) to tBHP (4.4%, vol/vol) plus a low level (270 mg l(-1)) of CTAB. Rates of killing of spores lacking most DNA protective alpha/beta-type small, acid-soluble spore proteins (alpha(-)beta(-) spores) or the major DNA repair protein, RecA, by tBHP plus CTAB and a TAML activator were essentially identical to that of wild-type spore killing. Survivors of wild-type and alpha(-)beta(-) spores treated with tBHP plus CTAB and a TAML activator also exhibited no increase in mutations. Spores lacking much coat protein either because of mutation or chemical decoating were much more sensitive to this reagent than were wild-type spores, but were more resistant than growing cells. Wild-type spores killed with this reagent retained their large pool of dipicolinic acid (DPA), and the survivors of spores treated with this reagent were sensitized to wet heat. The tBHP plus CTAB and TAML activator-killed spores germinated with nutrients, albeit more slowly than untreated spores, but germinated faster than untreated spores with dodecylamine. The killed spores were also germinated by application of 150 and 500 megaPascals of pressure for 15 min and by lysozyme treatment in hypertonic medium, but these spores lysed shortly after their germination. CONCLUSIONS: The combination of tBHP plus CTAB and a TAML activator is effective in killing B. subtilis spores. The spore coat is a major factor in spore resistance to this reagent system, which does not kill spores by DNA damage or by inactivating some component needed for spore germination. Rather, this reagent system appears to kill spores by damaging the spore's inner membrane in some fashion. SIGNIFICANCE AND IMPACT OF THE STUDY: This work demonstrates that tBHP plus CTAB and a TAML activator is an effective and mild decontaminant for spores of Bacillus species. Evidence has also been obtained on the mechanisms of spore resistance to and killing by this reagent system.     

Single-spore elemental analyses indicate that dipicolinic acid-deficient Bacillus subtilis spores fail to accumulate calcium

Dipicolinic acid (pyridine-2,6-carboxylic acid; DPA) is a major component of bacterial spores and has been shown to be an important determinant of spore resistance. In the core of dormant Bacillus subtilis spores, DPA is associated with divalent calcium in a 1:1 chelate (Ca–DPA). Spores excrete Ca–DPA during germination, but it is unknown whether Ca and DPA are imported separately or together into the developing spore. Elemental analysis by scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS) of wild-type spores and mutant spores lacking the ability to synthesize DPA showed that DPA-less spores also lacked calcium, suggesting that the two compounds may be co-imported.