One-Step Preparation and Fluorescence Enhancement Effect in SiO2/Eu2+ Doped with Ag Nanowires

Eu²⁺ single-doped SiO₂ (SiO₂/Eu²⁺) and Eu²⁺, Ag nanowires co-doped SiO₂ (SiO₂/Eu²⁺–Ag) luminescent nanomaterials were prepared by an efficient one-step sol–gel method. Their microstructure and optical properties were characterized, and the fluorescence enhancement of Eu²⁺ by Ag nanowires was investigated. The experimental results indicate that the average diameter of Ag nanowires doped is 12.5 nm, and the length–diameter ratio is 30. The Ag nanowires cannot only enhance the light absorption of SiO₂/Eu²⁺ in the range of 230–350 nm, but also reduce the fluorescence lifetime of Eu²⁺. More importantly, the emission intensity is enhanced after doping Ag nanowires, and the red shift phenomenon of the emission spectrum is observed, red shift occurs between 10 and 56 nm. The highest fluorescence intensity is accessed under the Ag doping concentration of 0.10 %. Additionally, the emission of SiO₂/Eu²⁺ with 0.10 % of Ag doping at 456 nm is 16 times stronger than that of pure SiO₂/Eu²⁺. The present results indicate that the fluorescence enhancement is attributed to the local field enhancement and the increased radiative decay rates induced by Ag nanowires.     

Tailoring LSPR-Based Absorption and Scattering Efficiencies of Semiconductor-Coated Au nanoshells

Absorption and scattering efficiencies of semiconductor-coated Au nanoshell have been studied by the extended Mie theory for their possible solar cell, optical imaging, and photothermal applications, etc. The effect of Au shell layer thickness, core size, and surrounding medium on the absorption and scattering efficiencies at the localized surface plasmon resonance (LSPR) wavelengths has been reported. It has been found that both the absorption and scattering efficiencies get blue-shifted with an increase in Au shell layer thickness from 2 to 10 nm and with an increase in surrounding refractive index whereas the corresponding LSPR peaks shift towards red. It has also been found that the spectra are red-shifted with an increase in the core radius from 20 to 40 nm while keeping the shell thickness same. The effect of shell thickness on the absorption peak position and absorption linewidth has also been studied. Hence, the optical response of both CdSe- and CdTe-coated Au nanoshells can be tuned and controlled from the visible to the near-infrared (NIR) region of the electromagnetic (EM) spectrum. Finally, the CdSe-coated Au nanoshell exhibits high scattering and absorption efficiencies in comparison to the CdTe-coated nanoshell.     

Plasmonic Core–Shell Nanowires for Enhanced Second-Harmonic Generation

We demonstrate the synthesis and characterization of core–shell nanowires consisting of a non-centrosymmetric KNbO₃ core and a gold shell. This type of nanostructure combines the nonlinear optical properties of the core and the plasmonic resonance of the shell in the near infrared spectral range. We report successful spectroscopic measurements on coated single wires to characterize the resonant behavior of the gold shell. We present a theoretical model based on the electrostatic approximation to estimate the enhancement of second-harmonic generation in a nanowire due to the shell. It suggests a possible enhancement factor of up to 4,000 for a system with a nanoshell of 16 nm thickness at a wavelength of 900 nm.     

Dual-Band Plasmonic Enhancement of Ag-NS@SiO2 on Gain Medium??s Spontaneous Emission

We present a theoretical study on plasmonic enhancement of molecular fluorescence near a nanocomposite, Ag nanoshell (Ag-NS) coated by a gain medium of molecule-doped SiO₂ layer. We use an average enhancement factor (AEF), which considers contributions from all possible orientations and locations of molecules in the silica layer to estimate the overall performance of Ag-NS@SiO₂ at specific excitation and emission wavelengths. Our results on the AEF reveal that Ag-NS@SiO₂ is a dual-band enhancer on the spontaneous emission of the gain medium; one is a narrowband in a shorter wavelength regime (quadrupole mode) and the other is a broadband in a longer wavelength regime (dipole mode). These two bands are tunable by adjusting the core size and the thickness of the Ag shell. Due to this merit, Ag-NS@SiO₂ has great potentials to enhance Forster resonance energy transfer between a donor and a corresponding acceptor with large Stokes shifts.     

The Effect of Bumpy Structure on Optical Properties of Bimetallic Nanoshells

In this paper, a sensitive bumpy bimetallic nanoshell for detection of thyroid cancer market (Thyroglobulin, Tg) and bovine serum albumin (BSA) proteins is reported. The physical origin of plasmonic properties of bimetal nanoshells is described by plasmon hybridization theory which indicates three intense and clearly separated plasmon modes. The electric field intensity enhancement of the bumpy bimetal nanoshell increases by ~559 %, at the surface of the bump in comparison with a smooth shell. The presence of bumpy structure on the nanoshell surface provides a high enhancement of the resulting Raman signal through an electromagnetic field of the order of 10⁷ which leads to an increase in sensitivity detection of Tg and BSA proteins. In addition, a refractive index (RI) sensitivity of 332.54 nm/RIU is achieved for this bumpy bimetallic nanoshell.     

Sensitive and Robust Colorimetric Sensing of Sulfide Anion by Plasmonic Nanosensors Based on Quick Crystal Growth

A highly sensitive and selective method for colorimetric sensing of sulfide anions in aqueous solutions is illustrated. The sensing mechanism is based on quick crystallization from Ag to Ag₂S in the presence of sulfide anions which alter the dielectric properties of the Au/Ag core/shell nanorods. The longitudinal surface plasmon resonance peak of the Au/Ag nanorods at about 686 nm undergoes a redshift and the color of the nanorod solution also changes from light green to purple. Sulfide ions at a concentration of 4.0 μM (1.3 ppb) can be detected visually and a sensitivity of 0.5 μM (167 ppt) is achieved by Vis–near-infrared spectrophotometry. Compared to other plasmonic sensors, our Au/Ag nanorod probe does not require surface modification while exhibiting high stability and robustness under different pH conditions. This simple and cost-effective sensing platform provides a rapid and convenient detection for sulfide anions at concentrations far below the hazardous limit in aqueous media.     

Plasmonic Property and Stability of Core-Shell Au@SiO2 Nanostructures

Au nanorod (Au NR) is one of the most studied colloidal nanostructures for its tunable longitudinal surface plasmon resonance (SPR_L) property in the near infrared region. And surface coating Au NRs into core-shell nanostructures is particularly important for further investigation and possible applications. In this paper, Au NRs colloids were synthesized using an improved seed method. Then as-prepared Au NRs were coated with SiO₂ to form a core-shell nanostructure (Au@SiO₂) with different shell thickness. And the influence of SiO₂ shell on the SPR_L of Au NRs was investigated based on the experimental results and FDTD simulations. Under the 808 nm laser irradiating, the stability of Au@SiO₂ was studied. Compared with Au NRs, the Au@SiO₂ is stable with increasing laser power (up to 8 W), whereas Au NRs undergo a shape deformation from rod to spherical nanoparticle when the laser power is 5 W. The high stability and tunable optical properties of core-shell structured Au@SiO₂, along with advantages of SiO₂, show that Au@SiO₂ composites are promising in designing plasmonic photothermal properties or further applications in nanomedicine.     

Speckled SiO2@Au Core–Shell Particles as Surface Enhanced Raman Scattering Probes

Silica particles of ~800 nm size were functionalized using 3-amino propyl triethoxysilane molecules on which gold particles (~20 nm size) were deposited. The resulting particles appeared to form speckled SiO₂@Au core–shell particles. The surface roughness, along with hot spots, due to nanogaps between the gold nanoparticles was responsible for the enhancement of the Raman signal of crystal violet molecules by ~3.2?×?10⁷ and by ~1.42?×?10⁸ of single-wall carbon nanotubes. It has also been observed that the electromagnetic excitation near surface plasmon resonance (SPR) of core–shell particles is more effective than off resonance SPR excitation.     

Quantifying the Usefulness of Oxide-Encapsulated Silver Nanoparticles in Semiconducting Films

Incorporating plasmonic nanoparticles (NPs) in an organic solar cell (OSC) can improve device performance. In our simulation studies, at NP resonance, absorption in poly(3-hexythiophene)/phenyl-C61-butyric acid methyl ester (P3HT/PCBM) can be increased by encapsulating 50 nm Ag NPs with Al₂O₃, HfO₂, MoO₃, and SiO₂. At Ag NP resonance, when the oxide thickness is significant enough, oxides with high relative permittivity induces a higher electric field enhancement at the metal/dielectric interface. This is translated to improved absorption in the polymer layer. By integrating against AM1.5G, overall absorption in P3HT/PCBM is improved when incorporating Ag NPs encapsulated with a thin oxide shell into the polymer film. However, polymeric absorption loss is induced for oxide-encapsulated Ag NPs if MoO₃ and SiO₂ shells are more than 5 nm. For Al₂O₃ and HfO₂, Ag NPs should not be encapsulated with shells thicker than 10 nm. Modeling studies are also extended to absorption in a CH₃NH₃PbI₃ perovskite layer. It is revealed that both Al₂O₃ and HfO₂ have an optimal shell thickness of about 20 nm to ensure maximum absorption in CH₃NH₃PbI₃. The results can be utilized as a useful guideline when designing photovoltaics from an optical point of view.     

Comparative Theoretical Study of the Optical Properties of Silicon/Gold,Silica/Gold Core/Shell and Gold Spherical Nanoparticles

The scattering and absorption efficiencies of light by individual silicon/gold core/shell spherical nanoparticles in air are analysed theoretically in the framework of Lorenz-Mie formalism. We have addressed the influence of particle-diameter and gold-shell thickness on the scattering and absorption efficiencies of such nano-heterostructures. For comparison, we also considered the famous silica/gold core/shell nanoparticle and pure gold nanoparticle. Our simulation clearly shows that the optical response of the illuminated Si/Au core/shell nanoparticle differs markedly from that of the famous SiO₂/Au heterostructure which in turn does not show a significant difference with that of the pure gold nanoparticle. This difference is clearly evident for shell thickness to outer particle radius ratio of less than 0.5. It manifests itself essentially by the occurrence of a strong and sharp absorption resonance beyond the wavelength of 600 nm where the silica/gold and the pure gold nanoparticles never absorb. The characteristics of this resonance are found to be sensitive to the particle diameter and the shell thickness. In particular, its spectral position can be adjusted over a wide spectral range from the visible to the mid-IR by varying the particle diameter and/or the shell thickness.     

Surface-Enhanced Raman Scattering in Tunable Bimetallic Core-Shell

In this paper, optical properties of multilayer spherical core-shell nanoparticles based on quasi-static approach and plasmon hybridization theory are investigated. Calculations show that light absorption spectrum of bimetallic multilayer core-shell has three intense plasmon resonance peaks, which are more suitable for multiplex biosensing based on surface-enhanced Raman scattering (SERS) and localized surface plasmon resonance (LSPR). The plasmon resonance peaks in bimetal nanshells are optimized by tuning the geometrical parameters. In addition, the optimal geometry is discussed to obtain the Raman enhancement factor in bimetallic multilayer nanoshell. SERS enhancement factor is calculated with consideration of dampings due to both the electron scattering and the radiation at the boundary and modified Drude model in dielectric function of bimetallic nanoshell. It is shown that bimetallic nanoshell with the small size exhibits strong SERS enhancement factor (~6.63 × 10⁵) with additional collision dampings and ~2.9 × 10⁹ with modified Drude model which are suitable for biosensing applications. In addition, any variation in blood concentration and oxygen level can be detected by this bimetallic core-shell nanoparticle with sensitivity of Δλ/Δn = 264.91 nm/RIU.     

Influence of SiO<Subscript>2</Subscript> Spacer Layer Thickness on Performance of Plasmonic Textured Silicon Solar Cell

We investigated the effect of SiO₂ spacer layer thickness between the textured silicon surface and silver nanoparticles (Ag NPs) on solar cell performance using quantum efficiency analysis. Separation of Ag NPs from high index silicon with SiO₂ layer led to modified absorption and scattering cross-sections due to graded refractive index medium. The forward scattering from Ag NPs is very sensitive to SiO₂ layer thickness in plasmonic silicon cell performance due to the evanescent character of generated near-fields around the NPs. With the optimized ～30–40 nm SiO₂ spacer layer, we observed an enhancement of solar cell efficiency from ～8.7 to ～10 %, which is due to the photocurrent enhancement in the off-resonance surface plasmon region. We also estimated minority carrier diffusion lengths (L _eff) from internal quantum efficiency data, which are also sensitive to SiO₂ spacer layer thickness. We observed that the L _eff values are enhanced from ～356 to ～420 μm after placing Ag NPs on ～40 nm spacer layer due to improved forward (angular) scattering of light from the Ag NPs into silicon.     

Plasmonic Perovskite Solar Cells Utilizing Au@SiO<Subscript>2</Subscript> Core-Shell Nanoparticles

The role of Au@SiO₂ core-shell nanoparticles on optical properties of perovskite solar cells has been explored using both the theoretical computations and the experiments. A quasi-static model is used to study the surface plasmon resonances (SPRs) of Au@SiO₂ core-shell nanospheres. Au@SiO₂ core-shell nanoparticles, with varying shell thickness and core radius, were assumed to be embedded in methylammonium lead triiodide (CH₃NH₃PbI₃) perovskite active layer. Enhanced absorption in the active layer is obtained due to the near-field plasmonic effect of the embedded core-shell nanoparticles. Theoretical modelling shows that a shell thickness of 1 nm and core diameter of 20 nm provide absorption enhancement in the orange-red region of the electromagnetic spectrum. Experiments performed using ～20-nm-sized Au@SiO₂ core-shell nanoparticles (with a shell thickness of ～1 nm) clearly demonstrate the enhanced absorption and the resulting enhancement in photocurrent due to the plasmonic effects. An efficiency enhancement of over 18 % is obtained for the best plasmonic perovskite solar cell containing Au@SiO₂ nanoparticles in Au@SiO₂-TiO₂ weight ratio of ～1 %. Incident photon-to-current conversion efficiency (IPCE) data also showed enhancement in photocurrent for the plasmonic device. The quasi-static modelling approach provides a good correlation between theory and experiment.     

Optimization of the Field Enhancement and Spectral Bandwidth of Single and Coupled Bimetal Core–Shell Nanoparticles for Few-Cycle Laser Applications

We have theoretically studied and optimized the field enhancement and temporal response of single and coupled bimetal Ag/Au core–shell nanoparticles (NPs) with a diameter of 160 nm and compared the results to pure Ag and Au NPs. Very high-field enhancements with an amplitude reaching 100 (with respect to the laser field centered at 800 nm) are found at the center of a 2-nm gap between Ag/Au core–shell dimers. We have explored the excitation of the bimetal core–shell particles by Fourier transform-limited few-cycle optical pulses and identified conditions for an ultrafast plasmonic decay on the order of the excitation pulse duration. The high-field enhancement and ultrafast decay makes bimetal core–shell particles interesting candidates for applications such as the generation of ultrashort extreme ultraviolet radiation pulses via nanoplasmonic field enhancement. Moreover, in first experimental studies, we synthesized small bimetal Ag/Au core–shell NPs and compared their optical response with pure Au and Ag NPs and numerical results.     

The Study of Surface Plasmon in Au/Ag Core/Shell Compound Nanoparticles

Au/Ag core/shell nanoparticles are fabricated by laser-ablating Ag plates in Au colloid solution. The absorption band is found to blue shift with increasing ablation time. Mie theory calculations show that the shift is caused by the increase of the Ag shell thickness. The average Ag shell thickness can be determined from the measured absorption peak. Using the plasmon hybridization approach, we show that the absorption band around 510 nm originates from an anti-bonding mode ω _?+ caused by the interaction between a bonding Ag shell mode ω _?? and Au sphere mode ω _S-Au. The blue shift of the ω _?+ mode with the increase of Ag shell thickness is also well predicted by the hybridization theory.     

Localized Surface Plasmon Resonance and Refractive Index Sensitivity of Metal–Dielectric–Metal Multilayered Nanostructures

The localized surface plasmon resonances of multilayered nanostructures are studied using finite difference time domain simulations and plasmon hybridization method. Concentric metal–dielectric–metal (MDM) structure with metal core and nanoshell separated by a thin dielectric layer exhibits a strong coupling between the core and nanoshell plasmon resonance modes. The coupled resonance mode wavelengths show dependence on the dielectric layer thickness and composition of core and outer layer metal. The aluminum-based MDM structures show lower plasmon wavelength compared with Ag- and Au-based MDM nanostructures. The calculated refractive index sensitivity (RIS) factor is in the order Ag–Air–Ag>Au–Air–Au>Al–Air–Al for monometallic multilayered nanostructures. Bimetallic multilayered nanostructures support strong and tunable plasmon resonance wavelengths as well as high RIS factor of 510 nm/refractive index unit (RIU) and 470 nm/RIU for Al–Air–Au and Ag-Air-Au, respectively. The MDM structures not only exhibit higher index sensitivity but also cover a wide ultraviolet–near-infrared wavelengths, making these structures very promising for index sensing, biomolecule sensing, and surface-enhanced Raman spectroscopy.     

Elucidating the Sole Contribution from Electromagnetic Near‐Fields in Plasmon‐Enhanced Cu2O Photocathodes

Despite many promising reports of plasmon‐enhanced photocatalysis, the inability to identify the individual contributions from multiple enhancement mechanisms has delayed the development of general design rules for engineering efficient plasmonic photocatalysts. Herein, a plasmonic photocathode comprised of Au@SiO₂ (core@shell) nanoparticles embedded within a Cu₂O nanowire network is constructed to exclusively examine the contribution from one such mechanism: electromagnetic near‐field enhancement. The influence of the local electromagnetic field intensity is correlated with the overall light‐harvesting efficiency of the device through variation of the SiO₂ shell thickness (5–22 nm) to systematically tailor the distance between the plasmonic Au nanoparticles and the Cu₂O nanowires. A threefold increase in device photocurrent is achieved upon integrating the Au@SiO₂ nanoparticles into the Cu₂O nanowire network, further enabling a 40% reduction in semiconductor film thickness while maintaining photocathode performance. Photoelectrochemical results are further correlated with photoluminescence studies and optical simulations to confirm that the near‐field enhancement is the sole mechanism responsible for increased light absorption in the plasmonic photocathode.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnetic core/shell Fe3O4/Au nanoparticles for studies of quinolones binding to protein by fluorescence spectroscopy

Magnetic core/shell Fe₃O₄/Au nanoparticles were used in the determination of drug binding to bovine serum albumin (BSA) using a fluorescence spectroscopic method. The binding constants and number of binding sites for protein with drugs were calculated using the Scatchard equation. Because of their superparamagnetic and biocompatible characteristics, magnetic core/shell Fe₃O₄/Au nanoparticles served as carrier proteins for fixing proteins. After binding of the protein to a drug, the magnetic core/shell Fe₃O₄/Au nanoparticles–protein–drug complex was separated from the free drug using an applied magnetic field. The free drug concentration was obtained directly by fluorescence spectrometry and the proteins did not influence the drug determination. So, the achieved number of binding sites should be reliable. The binding constant and site number for ciprofloxacin (CPFX) binding to BSA were 2.055 × 10⁵ L/mol and 31.7, and the corresponding values for norfloxacin (NOR) binding to BSA were 1.383 × 10⁵ L/mol and 38.8. Based on the achieved results, a suitable method was proposed for the determination of binding constants and the site number for molecular interactions. The method was especially suitable for studies on the interactions of serum albumin with the active ingredients of Chinese medicine. Copyright © 2015 John Wiley & Sons, Ltd.