Linearization and transposition of circular molecules of insertion sequence IS3.

IS3 transposase has been shown to promote production of characteristic circular and linear IS3 molecules from the IS3-carrying plasmid; IS3 circles have the entire IS3 sequence with terminal inverted repeats, IRL and IRR, which are separated by a three base-pair sequence originally flanking either end in the parental plasmid, whereas linear IS3 molecules have three nucleotide overhangs at their 5' ends. Here, we showed that a plasmid carrying an IS3 derivative, which is flanked by different sequences at both ends, generated IS3 circles and linear IS3 molecules owing to the action of transposase. Cloning and sequencing analyses of the linear molecules showed that each had the same 5'-protruding three nucleotide overhanging sequences at both ends, suggesting that the linear molecules were not generated from the parental plasmid by the two double-strand breaks at both end regions of IS3. The plasmid carrying IS3 with a two base-pair mutation in the terminal dinucleotide, which would be required for transposase to cleave the 3' end of IS3, could still generate linear molecules as well as circles. Plasmids bearing an IS3 circle were cleaved by transposase and gave linear molecules with the same 5'-protruding three nucleotide overhanging sequences. These show that the linear molecules are generated from IS3 circles via a double-strand break at the three base-pair intervening sequence. Plasmids carrying an IS3 circle with the two base-pair end mutation still were cleaved by transposase, though with reduced efficiencies, suggesting that IS3 transposase has the ability to cleave not only the 3' end of IS3, but a site three nucleotides from the 5' end of IS3. IS3 circles also were shown to transpose to the target plasmids. The end mutation almost completely inhibited this transposition, showing that the terminal dinucleotides are important for the transfer of the 3' end of IS3 to the target as well as for the end cleavage.     

Genetic characterization of pAsa6, a new plasmid from Aeromonas salmonicida subsp. salmonicida that encodes a type III effector protein AopH homolog

A new plasmid designated pAsa6 from an Aeromonas salmonicida subsp. salmonicida strain isolated from diseased turbot has been characterized. pAsa6 consists of 18536 bp, has a G+C content of 53.8% and encodes 20 predicted open-reading frames (ORFs). Eight ORFs showed homology to transposases, of which six are complete and two are partial IS sequences. Two ORFs showed homology to replication proteins, and six ORFs showed homology to hypothetical proteins. Two ORFs are truncated homologs of putative A. salmonicida sulfatases. Two genes, aopH and sycH encode homologs of an effector protein for which a role in fish colonization by A. salmonicida has been previously reported, and its chaperone, respectively. The results of filter conjugation experiments suggested that pAsa6 is not mobilizable, as it failed to be conjugally-transferred to several species of marine bacteria tested. All the ORFs of pAsa6 with the exception of four copies of a IS1 transposase gene, have a counterpart in the recently sequenced 155-kb A. salmonicida plasmid pAsa5, suggesting either that pAsa6 is a derivative of pAsa5, or that pAsa5 is the result of the fusion of a pAsa6-like plasmid and a larger plasmid of ca. 135-kb. The pAsa6-encoded repA and aopH genes could be PCR-amplified from strains lacking pAsa6, suggesting presence of a large, possibly pAsa5-like plasmid that was not detected on agarose gels, or the existence of chromosome-integrated plasmid sequences. This study demonstrates that genomic locations for the aopH gene different to pAsa5 or pAsa5-like plasmids exist in A. salmonicida.     

Isolation of a new insertion element of Yersinia intermedia closely related to remnants of mobile genetic elements present on Yersinia plasmids harboring the Yop virulon

A new insertion element present in two alleles, designated IS1635.1 and IS1635.2, was identified on a plasmid of a Yersinia intermedia strain by hybridization with the Yersinia enterocolitica pYV virulence plasmid. IS1635.1 and IS1635.2 are 861 bp long, carry imperfect inverted terminal repeats and possess a single open reading frame encoding a putative transposase of the IS6 family. A truncated IS1635 element is present immediately downstream of element IS1635.2. The capacity of the IS1635 elements to mediate transposition in Yersinia was demonstrated with a R6K-derived suicide vector, where a kanamycin resistance gene had been inserted between IS1635.1 and IS1635.2. Hybridization and sequence alignments showed that remnants of IS1635-like insertion elements harboring large deletions and point mutations are present on the Yop virulon harboring plasmids of pathogenic Yersinia strains. In a few cases, the IS1635 element has also been found on plasmids of apathogenic Yersinia strains.     

Sequence analysis of a group of low molecular-weight plasmids carrying multiple IS903 elements flanking a kanamycin resistance aph gene in Salmonella enterica serovars

A group of low molecular-weight ColE1-like plasmids carrying the aph sequence type aph(ii) from three different Salmonella serovars were sequenced. These plasmids carry two or more copies of IS903 elements, with up to 21bp sequence differences to one another, two of which flank the aph gene. This group of plasmids did not appear to carry any known mobilization genes and instead carry three open reading frames encoding hypothetical proteins of unknown function possibly organized in an operon. The plasmid replication region (RNA I/II--rom) of this plasmid group showed extensive homology to that of pKPN2 plasmid of Klebsiella pneumoniae and pCol-let plasmid of Escherichia coli. Three of the four plasmids had identical sequences, and the fourth had an extra copy of IS903 with target duplication, suggesting a recent divergence in the different Salmonella serovars from a common ancestor.     

An in vivo assay for conjugation-mediated recombination yields novel results for Streptomyces plasmid pIJ101

Efficient transmission of circular plasmids in Streptomyces spp. proceeds by an uncharacterized mechanism that requires a cis-acting locus of transfer (clt) and often only a single plasmid-encoded protein. For circular plasmids from other bacteria, site- and strand-specific nicking takes place at the cis-acting oriT locus via the plasmid-encoded relaxase protein prior to single-strand transfer. Using an assay originally designed to demonstrate that conjugative transfer of plasmids containing tandem oriT loci results in the formation of a single composite oriT locus, we show here that an analogous construct involving the pIJ101 clt locus apparently does not undergo such a conjugation-mediated event during plasmid transfer. Our results, which imply that streptomycete plasmids are transferred by a functionally distinct mechanism compared to oriT-containing plasmids, are complementary to other recent evidences that support a novel double-stranded model for streptomycete circular plasmid transfer.     

Generation of trangenic Xenopus laevis using the Sleeping Beauty transposon system

Using the Sleeping Beauty (SB) transposon system, we have developed a simple method for the generation of Xenopus laevis transgenic lines. The transgenesis protocol is based on the co-injection of the SB transposase mRNA and a GFP-reporter transposon into one-cell stage embryos. Transposase-dependent reporter gene expression was observed in cell clones and in hemi-transgenic animals. We determined an optimal ratio of transposase mRNA versus transposon-carrying plasmid DNA that enhanced the proportion of hemi-transgenic tadpoles. The transgene is integrated into the genome and may be transmitted to the F1 offspring depending on the germline mosaicism. Although the transposase is necessary for efficient generation of transgenic Xenopus, the integration of the transgene occurred by an non-canonical transposition process. This was observed for two transgenic lines analysed. The transposon-based technique leads to a high transgenesis rate and is simple to handle. For these reasons, it could present an attractive alternative to the classical Restriction Enzyme Mediated Integration (REMI) procedure.Electronic Supplementary Material Supplementary material is available to authorised users in the online version of this article at .     

Trans-activation and stable integration of the maize transposable element Ds cotransfected with the Ac transposase gene in transgenic rice plants

To develop an efficient gene tagging system in rice, a plasmid was constructed carrying a non-autonomous maize Ds element in the untranslated leader sequence of a hygromycin B resistance gene fused with the 35S promoter of cauliflower mosaic virus. This plasmid was cotransfected by electroporation into rice protoplasts together with a plasmid containing the maize Ac transposase gene transcribed from the 35S promoter. Five lines of evidence obtained from the analyses of hygromycin B-resistant calli, regenerated plants and their progeny showed that the introduced Ds was trans-activated by the Ac transposase gene in rice. (1) Cotransfection of the two plasmids is necessary for generation of hygromycin B resistant transformants. (2) Ds excision sites are detected by Southern blot hybridization. (3) Characteristic sequence alterations are found at Ds excision sites. (4) Newly integrated Ds is detected in the rice genome. (5) Generation of 8 by target duplications is observed at the Ds integration sites on the rice chromosomes. Our results also show that Ds can be trans-activated by the transiently expressed Ac transposase at early stages of protoplast culture and integrated stably into the rice genome, while the cotransfected Ac transposase gene is not integrated. Segregation data from such a transgenic rice plant carrying no Ac transposase gene showed that four Ds copies were stably integrated into three different chromosomes, one of which also contained the functional hph gene restored by Ds excision. The results indicate that a dispersed distribution of Ds throughout genomes not bearing the active Ac transposase gene can be achieved by simultaneous transfection with Ds and the Ac transposase gene.     

Comparison of the virulence plasmid genomes of two strains of Shigella which lost the ability to bind Congo red

We determined and analyzed the Shigella flexneri serotype 5 (pSF5) and S. dysenteriae serotype 1 (pSD1) virulence plasmid genomes. The total length of pSF5 is 136513 bp, including 165 open reading frames (ORFs). Of these ORFs, 133 were identified and 32 of those had no significant homology to proteins with known functions. The length of pSD1 is 182545 bp, including 224 ORFs, of which we identified 181. The remaining 43 ORFs were not significantly homologous to proteins with known functions. The insertion sequence (IS) elements are 53787 bp in pSF5, and 49616 bp in pSD1, which represents 39.4% and 27.1% of the genome, respectively. There are 22 IS element types in pSF5 and pSD1, among which we report ISEc8 and ISSbo6 for the first time in the Shigella virulence plasmid. Compared to pCP301, there are a large number of deleted genes and gene inversions in both pSF5 and pSD1. The ipa-mxi-spa locus in pSF5 is completely absent, and the genes related to the O-antigen biosynthesis are partially missing. In contrast, the above genes in pSD1 are integral, with the exception of virF. The whole genome analysis of the two plasmids shows that the loss of genes related to gene invasion or regulation also obliterates the ability of pPF5 and pSD1 to bind Congo red (Crb). Whether these genes determine the Crb function requires continued investigation. These authors contributed equally to this work.     

Two abundant intramolecular transposition products, resulting from reactions initiated at a single end, suggest that IS2 transposes by an unconventional pathway

The Escherichia coli insertion sequence, IS 2 , is a member of the IS 3 family of bacterial transposable elements. Its transposase is a fusion protein, OrfAB, made by a programmed −1 translational frameshift near to the end of orfA and just after the start of orfB . We have characterized two major products of IS 2 intramolecular transposition, which accumulate in cells that express the IS 2 OrfAB fusion protein at elevated levels. The more abundant product is a minicircle composed of the complete IS 2 with just a single basepair (occasionally 2 bp) separating the two IS ends. In all cases, this basepair is derived from the vector sequence immediately adjacent to the left IS 2 end (IRL). The second product is a figure-eight molecule that contains all the IS 2 and vector sequences present in the parental plasmid. One DNA strand contains the parental sequences unrearranged. The other contains a single-stranded version of the minicircle junction — the precise 3' end of IRR has been cleaved and joined to a target just outside the 5' end of IRL; the remaining vector sequences have a free 5' end, derived from cleavage at the 3' end of IRR, and a free 3' end, released upon cleavage of the target site adjacent to IRL. We propose that figure-eight molecules are the precursor to IS 2 minicircles and that the formation of these two products is the initial step in IS 2 intermolecular transposition. This proposed transposition pathway provides a means for a transposase that can cleave only one strand at each IS end to produce simple insertions and avoid forming co-integrates.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

Terminal inverted repeats of insertion sequence IS30 serve as targets for transposition.

In the present study, we demonstrate that the terminal inverted repeats of the Escherichia coli insertion sequence IS30 are functional target sites for the transposition of the (IS30)2 dimer, which represents an intermediate structure in the transposition of IS30. Comparative analysis of various target regions revealed that the left and right ends differ in their "attractivity." In our experiments, the joined left and right ends, i.e., the (IS30)2 intermediate structure, was found to be the most preferred target. It was also shown that flanking sequences can influence the target activity of the terminal repeats. The functional part of the target region was localized in the inverted repeats by means of mutational analysis, and it corresponds to the binding site of IS30 transposase. Insertion of 1 bp into the right inverted repeat resulted in unusual target duplication accompanied by gene conversion. The choice of the terminal inverted repeats as targets in transposition leads to the reconstruction of the (IS30)2 structure, which may induce a cascade of further rearrangements. Therefore, this process can play a role in the evolution of the genome.     

TnXO1, a germination-associated class II transposon from Bacillus anthracis

Bacillus anthracis harbours two virulence plasmids, pXO1 (182 kb) and pXO2 (95 kb). Whereas pXO2 harbours the cap operon coding for the capsule, pXO1 contains the pag, lef, and cya genes coding for protective antigen, lethal, and oedema factors, respectively, as well as the atxA regulatory gene. These genes are located within a 44.8 kb long pathogenicity island flanked by insertion sequences. Here, we describe the presence in the same plasmid region of an 8679 bp genetic element displaying the structural features of a class II cointegrative transposon. This element, named TnXO1, bears a transposase and a site-specific recombinase and is delineated by 38 bp terminal inverted repeats sequences similar to those of other members of this group of transposons. A putative res site has been identified in the 200 bp region between these genes. Interestingly, TnXO1 also contains the gerX operon involved in the germination of B. anthracis spores within phagocytic cells. Such close association of a mobile DNA structure with known virulence determinants in a pathogen further prompted us to look for the presence of this transposable element in other members of the Bacillus cereus sensu lato group. No instance of TnXO1 was detected outside of B. anthracis in PCR experiments, although it was found to be present in the genome sequence draft of one strain of B. cereus which has recently been shown to harbour a plasmid almost identical to pXO1.     

The Hermes transposon of Musca domestica and its use as a mutagen of Schizosaccharomyces pombe

Transposon mutagenesis allows for the discovery and characterization of genes by creating mutations that can be easily mapped and sequenced. Moreover, this method allows for a relatively unbiased approach to isolating genes of interest. Recently, a system of transposon based mutagenesis for Schizosaccharomyces pombe became available. This mutagenesis relies on Hermes, a DNA transposon from the house fly that readily integrates into the chromosomes of S. pombe. The Hermes system is distinct from the retrotransposons of S. pombe because it efficiently integrates into open reading frames. To mutagenize S. pombe, cells are transformed with a plasmid that contains a drug resistance marker flanked by the terminal inverted repeats of Hermes. The Hermes transposase expressed from a second plasmid excises the resistance marker with the inverted repeats and inserts this DNA into chromosomal sites. After S. pombe with these two plasmids grow 25 generations, approximately 2% of the cells contain insertions. Of the cells with insertions, 68% contain single integration events. The protocols listed here provide the detailed information necessary to mutagenize a strain of interest, screen for specific phenotypes, and sequence the positions of insertion.     

Plasmid stability in recombinant Saccharomyces cerevisiae

Because of many advantages, the yeast Saccharomyces cerevisiae is increasingly being employed for expression of recombinant proteins. Usually, hybrid plasmids (shuttle vectors) are employed as carriers to introduce the foreign DNA into the yeast host. Unfortunately, the transformed host often suffers from some kind of instability, tending to lose or alter the foreign plasmid. Construction of stable plasmids, and maintenance of stable expression during extended culture, are some of the major challenges facing commercial production of recombinant proteins. This review examines the factors that affect plasmid stability at the gene, cell, and engineering levels. Strategies for overcoming plasmid loss, and the models for predicting plasmid instability, are discussed. The focus is on S. cerevisiae, but where relevant, examples from the better studied Escherichia coli system are discussed. Compared to free suspension culture, immobilization of cells is particularly effective in improving plasmid retention, hence, immobilized systems are examined in some detail. Immobilized cell systems combine high cell concentrations with enhanced productivity of the recombinant product, thereby offering a potentially attractive production method, particularly when nonselective media are used. Understanding of the stabilizing mechanisms is a prerequisite to any substantial commercial exploitation and improvement of immobilized cell systems.     

Efficient stable gene transfer into human cells by the Sleeping Beauty transposon vectors

Transposable elements can be considered as natural, non-viral gene delivery vehicles capable of efficient genomic insertion. The plasmid-based transposon system of Sleeping Beauty (SB) combines the advantages of viruses and naked DNA molecules. In contrast to plasmid vectors, transposons integrate through a precise, recombinase-mediated mechanism into chromosomes, providing long-term expression of the gene of interest in cells. The advantages of transposons in comparison to viral systems include their simplicity and improved safety/toxicity profiles. In addition, the hyperactive SB100X is the first plasmid-based delivery system that overcomes the efficacy of non-viral delivery. The transposon delivery system consists of the transposase and the integration cassette, recognized by the transposase. The plasmid-based transposon delivery system can be combined with any non-viral delivery method. Here we provide two detailed protocols to apply SB-mediated, non-viral gene transfer in cultured cells. In our first example, we use a lipid-based delivery method in combination with the transposon-based integration system in an easy-to-transfect (HeLa) cell line. Second, we show how to achieve 40–50% stable expression of a transgene in clinically relevant, hard-to-transfect cells (hematopoetic stem cells, HSCs) by nucleofection. The given protocols are adaptable to any vertebrate cells in culture.     

The N-terminal domain of the insertion sequence 30 transposase interacts specifically with the terminal inverted repeats of the element

The gene for the insertion sequence (IS) 30 transposase is placed under the control of the tac promoter, and large quantities of transposase are expressed upon induction. The resulting protein precipitates inside the Escherichia coli cells in the form of inclusion bodies which, upon cell lysis, cannot be dissolved under nondenaturing conditions. In contrast, the N-terminal third of the transposase, a 17-kDa protein produced by a truncated gene, can be purified and is able to interact site specifically with the ends of the IS30 element. In DNase I footprint experiments, regions of 26 nucleotides on one DNA strand and 19 nucleotides on the other strand at either end of the element are protected from nuclease digestion. It is concluded that a functional DNA-binding domain can be formed by expression of only one-third of the complete IS30 transposase. Sequence comparison shows a homology of the IS30 ends to the ends of IS4351 and to the L1 end of bacteriophage Mu.