SecY and SecA interact to allow SecA insertion and protein translocation across the Escherichia coli plasma membrane.

SecA, the preprotein-driving ATPase in Escherichia coli, was shown previously to insert deeply into the plasma membrane in the presence of ATP and a preprotein; this movement of SecA was proposed to be mechanistically coupled with preprotein translocation. We now address the role played by SecY, the central subunit of the membrane-embedded heterotrimeric complex, in the SecA insertion reaction. We identified a secY mutation (secY205), affecting the most carboxyterminal cytoplasmic domain, that did not allow ATP and preprotein-dependent productive SecA insertion, while allowing idling insertion without the preprotein. Thus, the secY205 mutation might affect the SecYEG 'channel' structure in accepting the preprotein-SecA complex or its opening by the complex. We isolated secA mutations that allele-specifically suppressed the secY205 translocation defect in vivo. One mutant protein, SecA36, with an amino acid alteration near the high-affinity ATP-binding site, was purified and suppressed the in vitro translocation defect of the inverted membrane vesicles carrying the SecY205 protein. The SecA36 protein could also insert into the mutant membrane vesicles in vitro. These results provide genetic evidence that SecA and SecY specifically interact, and show that SecY plays an essential role in insertion of SecA in response to a preprotein and ATP and suggest that SecA drives protein translocation by inserting into the membrane in vivo.     

Characterization of a mutant form of SecA that alleviates a SecY defect at low temperature and shows a synthetic defect with SecY alteration at high temperature

The secY205 mutant is cold-sensitive for protein export, with an in vitro defect in supporting ATP- and preprotein-dependent insertion of SecA into the membrane. We characterized SecA81 with a Gly516 to Asp substitution near the minor ATP-binding region, which suppresses the secY205 defect at low temperature and exhibits an allele-specific synthetic defect with the same SecY alteration at 42 degrees C. The overproduced SecA81 aggregated in vivo at temperatures above 37 degrees C. Purified SecA81 exhibited markedly enhanced intrinsic and membrane ATPase activities at 30 degrees C, while it was totally inactive at 42 degrees C. The trypsin digestion patterns indicated that SecA81 has some disorder in the central region of SecA, which encompasses residues 421-575. This conformational abnormality may result in unregulated ATPase at low temperature as well as the thermosensitivity of the mutant protein. In the presence of both proOmpA and the wild-type membrane vesicles, however, the thermosensitivity was alleviated, and SecA81 was able to catalyze significant levels of proOmpA-stimulated ATP hydrolysis as well as proOmpA translocation at 42 degrees C. While SecA81 was able to overcome the SecY205 defect at low temperature, the SecY205 membrane vesicles could not significantly support the translocation ATPase or the proOmpA translocation activity of SecA81 at 42 degrees C. The inactivated SecA81 molecules seemed to jam the translocase since it interfered with translocase functions at 42 degrees C. Based on these results, we propose that under preprotein-translocating conditions, the SecYEG channel can stabilize and activate SecA, and that this aspect is defective for the SecA81-SecY205 combination. The data also suggest that the conformation of the central region of SecA is important for the regulation of ATP hydrolysis and for the productive interaction of SecA with SecY.     

Characterization of cold-sensitive secY mutants of Escherichia coli.

Mutations which cause poor growth at a low temperature, which affect aspects of protein secretion, and which map in or around secY (prlA) were characterized. The prlA1012 mutant, previously shown to suppress a secA mutation, proved to have a wild-type secY gene, indicating that this mutation cannot be taken as genetic evidence for the secA-secY interaction. Two cold-sensitive mutants, the secY39 and secY40 mutants, which had been selected by their ability to enhance secA expression, contained single-amino-acid alterations in the same cytoplasmic domain of the SecY protein. Protein export in vivo was partially slowed down by the secY39 mutation at 37 to 39 degrees C, and the retardation was immediately and strikingly enhanced upon exposure to nonpermissive temperatures (15 to 23 degrees C). The rate of posttranslational translocation of the precursor to the OmpA protein (pro-OmpA protein) into wild-type membrane vesicles in vitro was only slightly affected by reaction temperatures ranging from 37 to 15 degrees C, and about 65% of OmpA was eventually sequestered at both temperatures. Membrane vesicles from the secY39 mutant were much less active in supporting pro-OmpA translocation even at 37 degrees C, at which about 20% sequestration was attained. At 15 degrees C, the activity of the mutant membrane decreased further. The rapid temperature response in vivo and the impaired in vitro translocation activity at low temperatures with the secY39 mutant support the notion that SecY, a membrane-embedded secretion factor, participates in protein translocation across the bacterial cytoplasmic membrane.     

Peculiar properties of DsbA in its export across the Escherichia coli cytoplasmic membrane

Export of DsbA, a protein disulfide bond-introducing enzyme, across the Escherichia coli cytoplasmic membrane was studied with special reference to the effects of various mutations affecting translocation factors. It was noted that both the internalized precursor retaining the signal peptide and the periplasmic mature product fold rapidly into a protease-resistant structure and they exhibited anomalies in sodium dodecyl sulfate-polyacrylamide gel electrophoresis in that the former migrated faster than the latter. The precursor, once accumulated, was not exported posttranslationally. DsbA export depended on the SecY translocon, the SecA ATPase, and Ffh (signal recognition particle), but not on SecB. SecY mutations, such as secY39 and secY205, that severely impair translocation of a number of secretory substrates by interfering with SecA actions only insignificantly impaired the DsbA export. In contrast, secY125, affecting a periplasmic domain and impairing a late step of translocation, exerted strong export inhibition of both classes of proteins. These results suggest that DsbA uses not only the signal recognition particle targeting pathway but also a special route of translocation through the translocon, which is hence suggested to actively discriminate pre-proteins.     

The secY protein can act post-translationally to promote bacterial protein export

Conditionally lethal Escherichia coli mutants in secY (prlA) show defective export of proteins to the periplasm and outer membrane. It has been proposed that this gene and other sec genes must act on pro-OmpA at an early stage of protein synthesis in order to allow later translocation to occur. We have described a temperature-sensitive mutation in which the secYts function is impaired at the nonpermissive temperature (Ito, K. (1984) Mol. Gen. Genet. 197, 204-208). A plasmid bearing the wild-type secY gene under the control of the lactose operon (Shiba, K., Ito, K., Yura, T., and Cerretti, D. P. (1984) EMBO J. 3, 631-635) has been introduced into this mutant strain. We now report that the in vivo chase of pulse-labeled full length pro-OmpA to mature OmpA is accelerated by inducing the synthesis of the wild-type secY protein at the end of the period of pulse labeling. We have also assayed the requirements for secY function for in vitro protein translocation. Membranes derived from secY ts cells which were incubated at 42 degrees C were inactive in vitro in the post-translational uptake and processing of pro-OmpA. Thus, the secY protein can act post-translationally, enhancing the translocation of completed pro-OmpA polypeptide chains across the plasma membrane.     

Translocation of pro-OmpA across inner membrane vesicles of Escherichia coli occurs in two consecutive energetically distinct steps

The rate of energy-dependent transfer of pro-OmpA across Escherichia coli inner membrane vesicles in vitro was found to be a function of the ATP concentration. At concentrations above 0.1 mM ATP, the addition of a transmembrane electrochemical potential (proton motive force or pmf) increased the rate of pro-OmpA translocation. Additional experiments demonstrated that the overall reaction proceeded by at least two distinct energy-requiring steps. The first step required only ATP, was nearly unaffected by the pmf, and resulted in the insertion of the amino-terminal domain of pro-OmpA across the membrane. The insertion exposed the signal sequence cleavage site to the periplasmic side of the membrane, as measured by the appearance of a mature length translocation intermediate. However, this intermediate was partially exposed to the cytoplasmic side of the membrane. In a second energy-dependent step, either ATP or the pmf was sufficient to complete the translocation of mature length OmpA across the membrane.     

Function of YidC for the insertion of M13 procoat protein in Escherichia coli: translocation of mutants that show differences in their membrane potential dependence and Sec requirement.

The membrane insertion of the Sec-independent M13 Procoat protein in bacteria requires the membrane electrochemical potential and the integral membrane protein YidC. We show here that YidC is involved in the translocation but not in the targeting of the Procoat protein, because we found the protein was partitioned into the membrane in the absence of YidC. YidC can function also to promote membrane insertion of Procoat mutants that insert independently of the membrane potential, proving that the effect of YidC depletion is not due to a dissipation of the membrane potential. We also found that YidC is absolutely required for Sec-dependent translocation of a long periplasmic loop of a mutant Procoat in which the periplasmic region has been extended from 20 to 194 residues. Furthermore, when Sec-dependent membrane proteins with large periplasmic domains were overproduced under YidC-limited conditions, we found that the exported proteins pro-OmpA and pre-peptidoglycan-associated lipoprotein accumulated in the cytoplasm. This suggests for Sec-dependent proteins that YidC functions at a late stage in membrane insertion, after the Sec translocase interacts with the translocating membrane protein. These studies are consistent with the understanding that YidC cooperates with the Sec translocase for membrane translocation and that YidC is required for clearing the protein-conducting channel.     

Indecisive M13 procoat protein mutants bind to SecA but do not activate the translocation ATPase

The M13 procoat protein serves as the paradigm for the Sec-independent membrane insertion pathway. This protein is inserted into the inner membrane of Escherichia coli with two hydrophobic regions and a central periplasmic loop region of 20 amino acid residues. Extension of the periplasmic loop region renders M13 procoat membrane insertion Sec-dependent. Loop regions with 118 or more residues required SecA and SecYEG and were efficiently translocated in vivo. Two mutants having loop regions of 80 and 100 residues, respectively, interacted with SecA but failed to activate the membrane translocation ATPase of SecA in vitro. Similarly, a procoat mutant with two additional glutamyl residues in the loop region showed binding to SecA but did not stimulate the ATPase. The three mutants were also defective for precursor-stimulated binding of SecA to the membrane surface. Remarkably, the mutant proteins act as competitive inhibitors of the Sec translocase. This suggests that the region to be translocated is sensed by SecA but the activation of the SecA translocation ATPase is only successful for substrates with a minimum length of the translocated region.     

Membrane insertion of the mannitol permease of Escherichia coli occurs under conditions of impaired SecA function.

The membrane insertion of the mannitol permease (MtlA protein) of Escherichia coli, a polytopic cytoplasmic membrane protein possessing an uncleaved amphiphilic signal sequence, was studied using a cell-free protein synthesis system. The MtlA protein synthesized in the presence of inside-out cytoplasmic membrane vesicles was shown to insert into the membranes based on the following criteria: (a) co-sedimentation of the majority of the MtlA protein with the vesicles; (b) selective extraction of the membrane-associated MtlA by doxycholate but not by urea treatment; and (c) protease resistance of a defined MtlA fragment observed exclusively in the presence of membranes. Post-translational addition of membrane vesicles allowed membrane association of MtlA but did not allow efficient integration. In cell-free systems having reduced levels of the export factors SecA and SecB and exhibiting defective translocation of preOmpA and preLamB, insertion of the in vitro synthesized MtlA apparently occurred normally. In contrast, when membranes from the secY24ts mutant or trypsin-treated membranes were used, insertion of MtlA was reduced. In vivo experiments monitoring the permease activity of MtlA in the secA and secY mutants supported the conclusions of the in vitro results. Thus, the insertion of MtlA is essentially SecA- and SecB-independent but may be dependent on SecY and/or an as yet unidentified membrane protein. The requirements for the insertion of the mannitol permease are therefore clearly different from those for the translocation of most proteins having a cleavable hydrophobic signal sequence.     

SecA protein is directly involved in protein secretion in Escherichia coli

A high-expression plasmid for the secA gene was constructed. The SecA protein was then overproduced in E. coli and purified. The purified SecA stimulated the in vitro translocation of a model secretory protein into inverted membrane vesicles pretreated with 4 M urea. Membrane vesicles from a secAts mutant exhibited lower translocation activity, which was enhanced by SecA. These results indicate that SecA is directly involved in protein secretion across the cytoplasmic membrane.     

Coupled structure change of SecA and SecG revealed by the synthetic lethality of the secAcsR11 and ΔsecG::kan double mutant

An Escherichia coli strain carrying either the secAcsR11 or Δ secG :: kan mutation is unable to grow at low temperature owing to cold-sensitive protein translocation but grows normally at 37°C. However, introduction of the two mutations into the same cells caused a severe defect in protein translocation and the cells were unable to grow at any temperature examined, indicating that secG is essential for the secAcsR11 mutant. The mutant SecA (csSecA) was found to possess a single amino acid substitution in the precursor-binding region and was defective in the interaction with the precursor protein. Furthermore, the membrane insertion of SecA and the membrane topology inversion of SecG, both of which took place upon the initiation of protein translocation, were significantly retarded even at 37°C, when csSecA was used instead of the wild-type SecA. The insertion of the wild-type SecA was also significantly defective when SecG-depleted membrane vesicles were used in place of SecG-containing ones. No insertion of csSecA occurred into SecG-depleted membrane vesicles. Examination of in vitro protein translocation at 37°C revealed that SecG is essential for csSecA-dependent protein translocation. We conclude that SecG and SecA undergo a coupled structure change, that is critical for efficient protein translocation.     

Biochemical characterization of a mutationally altered protein translocase: proton motive force stimulation of the initiation phase of translocation

Protein translocation across the Escherichia coli plasma membrane is facilitated by concerted actions of the SecYEG integral membrane complex and the SecA ATPase. A secY mutation (secY39) affects Arg357, an evolutionarily conserved and functionally important residue, and impairs the translocation function in vivo and in vitro. In this study, we used the "superactive" mutant forms of SecA, which suppress the SecY39 deficiency, to characterize the mutationally altered SecY39EG translocase. It was found that SecY39-mediated preprotein translocation exhibited absolute dependence on the proton motive force. The proton motive force-dependent step proved to lie before signal peptide cleavage. We suggest that the proton motive force assists in the initiation phase of protein translocation.     

Two SecG molecules present in a single protein translocation machinery are functional even after crosslinking

SecG, a membrane component of the protein translocation apparatus of Escherichia coli, undergoes membrane topology inversion, which is coupled to the membrane insertion and deinsertion cycle of SecA. Eighteen SecG derivatives possessing a single cysteine residue at various positions were constructed and expressed in a secG null mutant. All the SecG-Cys derivatives retained the SecG function, and stimulated protein translocation both in vivo and in vitro. Inverted membrane vesicles containing a SecG-Cys derivative were labeled with a membrane-permeable or -impermeable sulfhydryl reagent before or after solubilization with a detergent. The accessibility of these reagents to the cysteine residue of each derivative determined the topological arrangement of SecG in the membrane. Derivatives having the cysteine residue in the periplasmic region each existed as a homodimer crosslinked through disulfide bonds, indicating that two SecG molecules closely co-exist in a single translocation machinery. The crosslinking did not abolish the SecG function and the crosslinked SecG dimer underwent topology inversion upon protein translocation.     

Topology inversion of SecG is essential for cytosolic SecA-dependent stimulation of protein translocation

SecG, a subunit of the protein translocon, undergoes a cycle of topology inversion. To further examine the role of this topology inversion, we analyzed the activity of membrane vesicles carrying a SecG-PhoA fusion protein (SecG-PhoA inverted membrane vesicles (IMVs)). In the absence of externally added SecA, SecG-PhoA IMVs were as active in protein translocation as SecG(+) IMVs per SecA. Consistent with this observation, insertion of membrane-bound SecA into SecG-PhoA IMVs was normally observed. On the other hand, externally added SecA did not affect the activity of SecG-PhoA IMVs, but it caused >10-fold stimulation of the translocation activity of SecG(+) IMVs, indicating that the topology inversion of SecG, which cannot occur in SecG-PhoA IMVs, is essential for cytosolic SecA-dependent stimulation of protein translocation. SecG-PhoA IMVs generated a 46-kDa fragment of SecA upon trypsin treatment. The accumulation of this membrane-inserted SecA in the SecG-PhoA IMVs was responsible for the loss of the soluble SecA-dependent stimulation. Moreover, fixation of the inverted SecG topology was found to be dependent on soluble SecA. The dual functions of SecG in protein translocation will be discussed.     

Arginine 357 of SecY is needed for SecA-dependent initiation of preprotein translocation

The Escherichia coli SecYEG complex forms a transmembrane channel for both protein export and membrane protein insertion. Secretory proteins and large periplasmic domains of membrane proteins require for translocation in addition the SecA ATPase. The conserved arginine 357 of SecY is essential for a yet unidentified step in the SecA catalytic cycle. To further dissect its role, we have analysed the requirement for R357 in membrane protein insertion. Although R357 substitutions abolish post-translational translocation, they allow the translocation of periplasmic domains targeted co-translationally by an N-terminal transmembrane segment. We propose that R357 is essential for the initiation of SecA-dependent translocation only.     

Dissecting the translocase and integrase functions of the Escherichia coli SecYEG translocon

Recent evidence suggests that in Escherichia coli, SecA/SecB and signal recognition particle (SRP) are constituents of two different pathways targeting secretory and inner membrane proteins to the SecYEG translocon of the plasma membrane. We now show that a secY mutation, which compromises a functional SecY-SecA interaction, does not impair the SRP-mediated integration of polytopic inner membrane proteins. Furthermore, under conditions in which the translocation of secretory proteins is strictly dependent on SecG for assisting SecA, the absence of SecG still allows polytopic membrane proteins to integrate at the wild-type level. These results indicate that SRP-dependent integration and SecA/SecB-mediated translocation do not only represent two independent protein delivery systems, but also remain mechanistically distinct processes even at the level of the membrane where they engage different domains of SecY and different components of the translocon. In addition, the experimental setup used here enabled us to demonstrate that SRP-dependent integration of a multispanning protein into membrane vesicles leads to a biologically active enzyme.     

Membrane topology inversion of SecG detected by labeling with a membrane-impermeable sulfhydryl reagent that causes a close association of SecG with SecA

SecG stimulates protein translocation in Escherichia coli by facilitating the membrane insertion-deinsertion cycle of SecA. SecG was previously shown to undergo membrane topology inversion, since SecA-dependent protein translocation renders the membrane-protected region of SecG sensitive to external proteases. To examine this topology inversion in more detail without protease-treatment, SecG derivatives with a single cysteine residue at various positions were labeled in the presence and absence of protein translocation with a membrane impermeable SH reagent, 4-acetamido-4'-maleimidylstilbene-2-2'-disulfonic acid (AMS). Treatment of spheroplasts with AMS revealed that a cysteine residue in the cytoplasmic region of SecG could be labeled from the periplasm side only in the presence of protein translocation, whereas a cytoplasmic protein, elongation factor, Tu, remained unlabeled. Treatment of inverted membrane vesicles with AMS also revealed that cysteine residues in the periplasmic region were labeled from the cytoplasmic side of membranes only when protein translocation was in progress. This labeling required ATP, SecA and a precursor protein, and became more efficient as the position of the cysteine residue became closer to the C-terminus. Crosslinking analyses revealed that the interaction between SecG and SecA in membranes markedly increases when SecA and SecG undergo membrane-insertion and topology inversion, respectively. Thus, the two most dynamic components of the translocation machinery were found for the first time to interact with each other when both undergo conformational changes.     

Purification of the Escherichia coli secB gene product and demonstration of its activity in an in vitro protein translocation system

Mutations in the Escherichia coli secB gene lead to protein export defects in vivo (Kumamoto, C.A., and Beckwith, J. (1985) J. Bacteriol. 163, 267-274). To demonstrate directly the participation of the secB gene product (SecB) in protein export, SecB was purified, and its effects on in vitro protein translocation were analyzed. SecB was purified from soluble extracts of a strain that overproduced it, by ammonium sulfate precipitation, DEAE-cellulose chromatography, and differential precipitation at acid pH. The chromatographic behavior on gel filtration columns indicated apparent molecular masses of approximately 90 kDa for both purified SecB and SecB in cytosolic extracts of wild type cells. When added to a translocation mixture, purified SecB stimulated pro-OmpA translocation into membrane vesicles. SecB also suppressed the thermoinduced defect in translocating activity of membranes derived from a secY24 mutant. The results of these in vitro studies and of previous in vivo studies demonstrate that SecB plays a direct role in normal protein export in E. coli.     

The SecDFyajC domain of preprotein translocase controls preprotein movement by regulating SecA membrane cycling.

Escherichia coli preprotein translocase comprises a membrane-embedded hexameric complex of SecY, SecE, SecG, SecD, SecF and YajC (SecYEGDFyajC) and the peripheral ATPase SecA. The energy of ATP binding and hydrolysis promotes cycles of membrane insertion and deinsertion of SecA and catalyzes the movement of the preprotein across the membrane. The proton motive force (PMF), though not essential, greatly accelerates late stages of translocation. We now report that the SecDFyajC domain of translocase slows the movement of preprotein in transit against both reverse and forward translocation and exerts this control through stabilization of the inserted form of SecA. This mechanism allows the accumulation of specific translocation intermediates which can then complete translocation under the driving force of the PMF. These findings establish a functional relationship between SecA membrane insertion and preprotein translocation and show that SecDFyajC controls SecA membrane cycling to regulate the movement of the translocating preprotein.     

Increases in acidic phospholipid contents specifically restore protein translocation in a cold-sensitive secA or secG null mutant.

Both the secAcsR11 and DeltasecG::kan mutations cause cold-sensitive growth, although the growth defect due to the latter mutation occurs in a strain-specific manner. Overexpression of pgsA encoding phosphatidylglycerophosphate synthase suppresses the growth defects of the two mutants. We investigated the mechanism underlying the pgsA-dependent suppression of the two mutations using purified mutant SecA and inverted membrane vesicles (IMVs) prepared from pgsA-overexpressing cells. The acidic phospholipid content increased by about 10% upon pgsA overexpression. This increase resulted in the stimulation of proOmpA translocation only when mutant SecA or SecG-depleted IMVs were used. The translocation-coupled ATPase activity of SecA was significantly defective with the mutant SecA or SecG-depleted IMVs, but it recovered to a near normal level when the acidic phospholipid level was increased. The stimulation of ATPase activity was observed only at low temperature. The steady-state level of membrane-inserted SecA was low with the mutant SecA or SecG-depleted IMVs, and it decreased further upon the increase in the acidic phospholipid content. However, the level of SecA insertion markedly increased upon the inhibition of SecA deinsertion by the addition of beta,gamma-imido adenosine 5'-triphosphate (AMP-PNP), especially with IMVs containing increased levels of acidic phospholipids. These results indicate that the increase in the level of acidic phospholipids stimulates the SecA cycle in the two mutants by facilitating both the insertion and deinsertion of SecA.