Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Production and characterization of extracellular lipase from Calvatia gigantea

Summary A number of factors affecting production of extracellular lipase by the edible fungus Calvatia gigantea were investigated. Consecutive optimization of carbon and nitrogen sources, initial pH of culture medium and growth temperature resulted in an increase in lipase activity of 87%. Under optimum conditions, activities as high as 22.4 units ml^–1 of culture medium were obtained, competing favourably with most activities reported for other lipase hyperproducing microorganisms. The enzyme was optimally active at pH 7.0 and 30°C and had, at optimum pH, half-lives of 75.7 and 22.9 min at 45 and 55°C. Both high activity and kinetic characteristics of the enzyme make this process worthy of further investigation.Correspondence to: B. J. Macris     

Optimizing production of extracellular lipase fromRhodotorula glutinis

Production of extracellular lipase byRhodotorula glutinis was substantially enhanced when the type and concentration of carbon and nitrogen source, the initial pH of culture medium and the growth temperature were consecutively optimized. Lipase activity as high as 30.4 U/ml of culture medium was obtained at optimum conditions, comparing favourably with most of the activities reported for other lipase hyperproducing microorganisms. The enzyme was optimally active at pH 7.5 and 35°C and had, at optimum pH, half-lives of 45 and 11.8 min at 45 and 55°C respectively. The high activity and kinetic characteristics of the enzyme make this process worthy of further investigation.     

Production of extracellular alkaline lipase by a new thermophilicBacillus sp

A thermophilic soil isolate—Bacillus sp. RS-12, grew optimally at 50°C and not below 40°C. Production of an extracellular lipase by this organism was substantially enhanced when the type and concentration of carbon and nitrogen sources and initial pH of the culture medium were consecutively optimized. The lipase production was found to be growth-associated with maximum secretion in the late exponential growth phase,i.e. 15h of incubation. The enzyme activity as high as 0.98 nkat/mL was obtained under optimum conditions. Tween 80 (0.5%) and yeast extract (0.5%) were found to be the best carbon and nitrogen sources inducing maximum enzyme yield with initial pH 8.0 at 50°C. The kinetic characteristics of the crude lipase indicated the highest activity at 50–55°C and pH 8.0. It had a half life of 60, 18 and 15 min at 65, 70 and 75°C, respectively.     

Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

Identification and Characterization of Lipolytic Enzymes from a Peat-Swamp Forest Soil Metagenome

In this work, a metagenomic library was generated from peat-swamp forest soil obtained from Narathiwat Province, Thailand. From a fosmid library of approximately 15,000 clones, six independent clones were found to possess lipolytic activity at acidic pH. Analysis of pyrosequencing data revealed six ORFs, which exhibited 34–71% protein similarity to known lipases/esterases. A fosmid clone, designated LP8, which demonstrated the highest level of lipolytic activity under acidic conditions and demonstrated extracellular activity, was subsequently subcloned and sequenced. The full-length lipase/esterase gene, estPS2, was identified. Its deduced amino acid was closely related to a lipolytic enzyme of an uncultured bacterium, and contained the highly conserved motif of a hormone-sensitive family IV lipase. The EstPS2 enzyme exhibited highest activity toward p-nitrophenyl butyrate (C₄) at 37 °C at pH 5, indicating that it was an esterase with activity and secretion characteristics suitable for commercial development.     

Purification of lipase from Cunninghamella verticillata and optimization of enzyme activity using response surface methodology

The fungus Cunninghamella verticillata was selected from isolates of oil-mill waste as a potent lipase producer as determined by the Rhodamine-B plate method. The lipase was purified from C. verticillata by ammonium sulphate fractionation, ion exchange chromatography and gel filtration. The purified enzyme was formed from a monomeric protein with molecular masses of 49 and 42 kDa by SDS–PAGE and gel filtration, respectively. The optimum pH at 40 °C was 7.5 and the optimum temperature at pH 7.5 was 40 °C. The enzyme was stable between a pH range of 7.5 and 9.0 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, CdCl₂ and EDTA. However, the presence of Ca²⁺, Mn²⁺ and Ba²⁺ ions enhanced the activity of the enzyme. The activity of purified lipase with respect to pH, temperature and salt concentration was optimized using a Box–Behnken design experiment. A polynomial regression model used in analysing this data, showed a significant lack of fitness. Therefore, quadratic terms were incorporated in the regression model through variables. Maximum lipase activity (100%) was observed with 2 mM CaCl₂, (pH 7.5) at a temperature of 40 °C. Regression co-efficient correlation was calculated as 0.9956.     

Production and characterization of a cold-active and n-hexane activated lipase from a newly isolated Serratia grimesii RB06-22

Abstract

A lipase-producing bacterium isolated from raw milk was identified as Serratia grimesii based on 16S rRNA sequence analysis. The extracellular lipase was partially purified by ammonium sulfate precipitation and ultrafiltration. Maximal activity was observed at 10°C, the optimum pH was 8.0 and the enzyme was stable at 5–30°C for 1 h. The K_m and V_max values were 1.7 mM and 0.3 mM/min respectively. It was found that the lipase had the highest hydrolytic activity towards sunflower oil and soybean oil. CaCl₂ had a stimulatory effect on lipase activity, while EDTA and iodoacetic acid slightly inhibited the lipase activity and the enzyme was strongly inhibited by PMSF. The enzyme was compatible with various non-ionic surfactants as well as sodium cholate and saponin. In addition, the enzyme was relatively stable towards oxidizing agents. This lipase exhibited maximum activity in 35% n-hexane retaining about 2191% activity for 1 h.     

An organic solvent-tolerant alkaline lipase from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CS268 and its application in biodiesel production

In an effort to identify a microbial lipase that can catalyze transesterification reactions used in biodiesel production, an organic solvent-tolerant lipase was purified from Streptomyces sp. CS268. The molecular weight of the purified lipase was estimated to be 37.5 kDa by SDS-PAGE. The lipase showed highest activity at a temperature of 30°C and pH 8.0 while it was stable in the pH range 4.0 ∼ 9.0 and at temperatures ≤ 50°C. It showed the highest hydrolytic activity towards medium-length acyl chain p-nitrophenyl decanoate with K _m and V _max values of 0.59 mM and 319.5 mmol/mg/min, respectively. Also, the lipase showed non-position specificity for triolein hydrolysis. The purified lipase catalyzed transesterification reaction of soybean oil with methanol, suggesting that it can be a potential enzymatic catalyst for biodiesel production.     

Inhibition of hepatic lipase by m-aminophenylboronate application of phenylboronate affinity chromatography for purification of human postheparin plasma lipases

Phenylboronates are competitive inhibitors of serine hydrolases including lipases. We studied the effect of m-aminophenylboronate on triglyceride-hydrolyzing activity of hepatic lipase (EC 3.1.1.3). m-Aminophenylbo ronate inhibited hepatic lipase activity with a K₁ value of 55 μM. Furthermore, m-aminophenylboronate protected hepatic lipase activity from inhibition by di-isopropyl fluorophosphate, an irreversible active site inhibitor of serine hydrolases. Inhibition of hepatic lipase activity by m-aminophenylboronate was pH-dependent. The inhibition was maximal at pH 7.5, while at pH 10 it was almost non-existent. These data were used to develop a purification procedure for postheparin plasma hepatic lipase and lipoprotein lipase. The method is a combination of m-aminophenylboronate and heparin-Sepharose affinity chromatographies. Hepatic lipase was purified to homogeneity as analyzed on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The specific activity of purified hepatic lipase was 5.46 mmol free fatty acids h⁻¹ mg⁻¹ protein with a total purification factor of 14 400 and a final recovery of approximately 20%. The recovery of hepatic lipase activity in m-aminophenylboronate affinity chromatography step was 95%. The purified lipoprotein lipase was a homogeneous protein with a specific activity of 8.27 mmol free fatty acids h⁻¹ mg⁻¹ The purification factor was 23 400 and the final recovery approximately 20%. The recovery of lipoprotein lipase activity in the m-aminophenylboronate affinity chromatography step was 87%. The phenylboronate affinity chromatography step can be used for purification of serine hydrolases which interact with boronates.     

Partial purification and characterization of lipase from Geobacillus stearothermophilus AH22

The lipase was partially purified by ion exchange chromatography and gel filtration column chromatography, and was characterized from Geobacillus stearothermophilus AH22 strain. The lipase was purified 18.3-folds with 19.7% recovery. The lipase activity was determined by using p-nitrophenyl esters (C₂–C₁₂) as substrates. The K_m values of the enzyme for these substrates were found as 0.16, 0.02, 0.19 and 0.55?mM, respectively, while V_max values were 0.52, 1.03, 0.72 and 0.15?U?mg^?1. The enzyme showed maximum activity at 50?°C and between pH 8.0 and 9.0. The enzyme was found to be quite stable at pH range of 4.0–10.0, and thermal stability between 50 and 60?°C. It was found that the best inhibitory effect of the enzyme activity was of Hg²⁺. The inhibitory effect as orlistat, catechin, propyl paraben, p-coumaric acid, 3,4-dihydroxy hydro-cinnamic acid was examined. These results suggest that G. stearothermophilus AH22 lipase presents very suitable properties for industrial applications.     

Purification of lipase from Geotrichum candidum: conditions optimized for enzyme production using Box–Behnken design

The fungus Geotrichum candidum was selected from isolates of oil-mill waste as a potent lipase producer. Factors affecting lipase production by the fungus G. candidum in yeast-extract-peptone medium have been optimized by using a Box–Behnken design with seven variables to identify the significant correlation between effects of these variables in the production of the enzyme lipase. The experimental values were found to be in accordance with the predicted values, the correlation coefficient is 0.9957. It was observed that the variables days (6), pH (7.0), temperature (30 °C), carbon (1.25%), nitrogen (2.0%), Tween (1.0%) and salt concentrations (0.5 mM) were the optimum conditions for maximum lipase production (87.7 LU/ml). The enzyme was purified to homogeneity with an apparent molecular mass of 32 kDa by SDS-PAGE. The optimum pH at 40 °C was 7.0 and the optimum temperature at pH 7.0 was 40 °C. The enzyme was stable within a pH range of 6.5 to 8.5 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, and EDTA. However, the presence of Ca²⁺ and Ba²⁺ ions enhanced the activity of the enzyme.     

Kinetic Behaviour of Free Lipase and Mica-Based Immobilized Lipase Catalyzing the Synthesis of Sugar Esters

The utilization of natural mica as a biocatalyst support in kinetic investigations is first described in this study. The formation of lactose caprate from lactose sugar and capric acid, using free lipase (free-CRL) and lipase immobilized on nanoporous mica (NER-CRL) as a biocatalyst, was evaluated through a kinetic study. The apparent kinetic parameters, K _m and V _max, were determined by means of the Michaelis-Menten kinetic model. The Ping-Pong Bi-Bi mechanism with single substrate inhibition was adopted as it best explains the experimental findings. The kinetic results show lower K _m values with NER-CRL than with free-CRL, indicating the higher affinity of NER-CRL towards both substrates at the maximum reaction velocity (V _max,app>V _max). The kinetic parameters deduced from this model were used to simulate reaction rate data which were in close agreement with the experimental values.     

Acid and Neutral Hydrolases in Trypanosoma cruzi. Characterization and Assay*

Twelve acid hydrolases, 4 near-neutral hydrolases and alkaline phosphatase were demonstrated in 0.34 M sucrose homogenates of Trypanosoma cruzi strain Y: p-nitrophenylphosphatase and α-naphthylphosphatase, with optimum pH at ? 6.0; α-galactosidase, β-galactosidase, β-glucosidase, N-acetyl-β-glucosaminidase, cathepsin A and peptidase I and III, with optimum pH between 5.0 and 6.0: and arylsulfatase cathepsin D, α-arabinase and α-mannosidase with optimum pH at ? 4.0 α-Glucosidase, gluccse-6-phosphatase and peptidase II had optimum pH at ? 7.0. β-Glycerophcsphatase had a broad pH-activity curve from 4.0 to 7.4, with maximum activity at pH 7.0. The main kinetic characteristics of these enzymes and their quantitative assay methods were studied. No activity was detected for α-fucosidase, β-xylosidase, β-glucuronidase, elaidate esterase. acid lipase, and alkaline phospho-diesterase.     

<Emphasis Type="Italic">Fervidobacterium changbaicum</Emphasis> Lip1: identification,cloning, and characterization of the thermophilic lipase as a new member of bacterial lipase family V

A novel lipase gene encoded 315 amino acid residues was obtained using lipase-prospecting primers and genome walking from hyperthermophilic bacterium Fervidobacterium changbaicum CBS-1. Sequence alignment and phylogenetic analysis revealed this novel lipase is a new member of bacterial lipase family V. The recombinant enzyme F. changbaicum lipase 1 (FCLip1) showed maximum activity at 78°C and pH 7.8. It displayed extreme thermostability at 70°C and was also stable across a wide pH range from 6.0 to 12.0. Kinetic study demonstrated FCLip1 preferentially hydrolyzed middle-length acyl chains, especially p-nitrophenyl caprate and tricaprylin. With p-nitrophenyl caprate as a substrate, the enzyme exhibited a K _m and k _cat of 4.67 μM and 22.7/s, respectively. In addition, FCLip1 was resistant to various detergents and organic solvents. This enzyme is the first reported thermophilic lipase from bacterial family Thermotogaceae. Its extreme stability with respect to temperature and pH, along with its triglyceride hydrolysis activity, indicate that FCLip1 has high potential for future application.     

Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Immobilization of lipase from Candida rugosa on a polymer support

Lipase from Candida rugosa was immobilized by adsorption onto a macroporous copolymer support. Under optimum conditions the maximum amount of protein bound was 15.4 mg/g and the immobilization efficiency was 62%. The kinetics of lipase binding to the selected polymer carrier was assessed by using a general model of topochemical reactions. The effect of temperature on adsorption was thoroughly investigated, as was the adsorption mechanism itself. Analysis of the proposed kinetic model and the specific kinetic parameters measured suggest that surface kinetics control the adsorption process. According to the activation energy (E _a) and the rate constant, k, the enzyme has rather a high affinity for the support's active sites. The immobilized enzyme was used to catalyse the hydrolysis of palm oil in a lecithin/isooctane reaction system, in which the enzyme's activity was 70% that of the free enzyme. Kinetic parameters such as maximum velocity (V _max) and the Michaelis constant (K _m) were determined for the free and the immobilized lipase. Following repeated use, the immobilized lipase retained 56% of its initial activity after the fifth hydrolysis cycle. Received: 3 April 1998 / Received revision: 28 July 1998 / Accepted: 29 July 1998     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

Studies on the Lipoprotein Lipases of Microorganisms

Mucor javanicus IAM 6108 was cultivated aerobically at large scale in the medium containing corn steep liquor 3.0%, soluble starch 1.0%, soybean yuto 1.0% and inorganic salts, and the lipoprotein lipase produced was recovered by addition of ammonium sulfate (0.7 saturation). From this crude preparation, the enzyme was purified about 13 times, through ammonium sulfate fractionation (0~0.4 saturation), precipitation at pH 4.0, ethanol precipitation (80%) and Sephadex G-200 gel filtration. The purified lipoprotein lipase was sedimented as single peak in ultracentrifugal analysis in the presence of 1.0% sodium dodecylsulfate. The enzymatic properties of the purified enzyme was as follows; optimum pH was 7.0, stable pH range was from 5.0 to 7.0, optimum temperature was 40°C, inactivated rapidly above 50°C. The lipoprotein lipase activity was inhibited by 75% and 88% by 10^?2 m taurocholate and 1.0 m NaCl, respectively. ZnCl₂, CuCl₂, Pb(NO₃)₂, and SnCl₂ at 10^?3 m showed complete inhibition. The ratio of lipoprotein lipase to lipase activity was 10 : 1. Lipoprotein lipase activity was dependent on the concentration of blood plasma which could be substituted by bovine serum albumin or egg albumin to a certain degree. The results suggesting the preferential α-fatty acid hydrolysis was obtained.     

Heterologous Expression and Purification of a Heat-Tolerant <Emphasis Type="Italic">Staphylococcus xylosus</Emphasis> Lipase

Staphylococcus xylosus is a microorganism involved in fermentation of meat products and also a natural producer of extracellular lipases. The aim of the present work was to clone and express in E. coli a lipase from S. xylosus (AF208229). This lipase gene (1084 bp) was amplified from a S. xylosus strain isolated from naturally fermented salami and introduced in pET14b expression vector in order to express the recombinant fusion protein (histidine-tagged lipase) in E. coli. Recombinant histidine-tagged S. xylosus lipase was purified by affinity chromatography in an HPLC system. The histidine-tagged lipase is a monomer in solution, as determined by size-exclusion chromatography. It presents a high lipase activity at pH 9.0 and 42°C for p-nitrophenyl acetate and p-nitrophenyl butyrate, among seven different esters assayed (pNPC₂, pNPC₄, pNPC₁₀, pNPC₁₂, pNPC₁₄, pNPC₁₆, pNPC₁₈). Moreover, the enzyme presented a quite interesting thermal stability, after an incubation period of 10 min at 95°C, 77% of the initial activity was retained.