Carboxymethylation of cellulose using reactive extrusion

Carboxymethyl cellulose was prepared using a continuous, reduced solvent, reactive extrusion process with a short reaction time. The effects of the amounts of NaOH (30 g, 40 g and 50 g), water:ethanol ratio (100%, 70%, 50%, 30% and 10% H₂O) and their interactions on the physical, chemical and morphological properties of carboxymethyl cellulose were studied. Experiments were conducted using to a 5 × 3 blocked factorial design. X-ray diffraction analyses revealed higher degrees of crystallinity and fractions of cellulose-II crystalline structure when 100% H₂O was used as compared to that for 70%, 50%, 30% and 10% H₂O and a commercially available brand of carboxymethyl cellulose, AQUASORB A500. Statistical analysis revealed a significant interaction between the effects of NaOH and H₂O on the degrees of substitutions. The degrees of substitutions decreased with increasing amounts of NaOH and tended to increase with increasing alcohol concentrations. Liquid uptake measurements revealed that the extent of saline uptake, measured at intervals of 1 min, 5 min and 10 min, by carboxymethyl cellulose prepared with 100% H₂O, especially when 40 g and 50 g NaOH was used, was higher than that for 70%, 50%, 30% and 10% H₂O and AQUASORB A500. This may have been because of the higher crystallinity in carboxymethyl cellulose prepared with 100% H₂O. Carboxymethyl cellulose prepared with 70% H₂O and 30 g and 50 g NaOH had the highest saline absorption, using the soak method, before and after centrifugation, respectively. Scanning electron microscopy for carboxymethyl cellulose prepared with 100% and 10% H₂O, through images at 120X magnification, revealed fibers 100 μ to >800 μ in length and 0.8-3.3 μ in breadth. Some non fibrous particles, 0.8-6.7 μ in dimensions, also were observed for 100% H₂O. Images at 900× magnification revealed partially damaged fiber surfaces.     

Synthesis of highly ordered cellulose II in vitro using cellodextrin phosphorylase

Synthesis of cellulose in vitro is expected to afford tailor-made cellulosic materials with highly homogeneous structure compared to natural cellulosic materials. Here we report the enzymatic synthesis of cellulose II with high crystallinity from glucose and α-glucose 1-phosphate (αG1P) by cellodextrin phosphorylase (CDP). Although glucose had been believed not to act as a glucosyl acceptor of CDP, a significant amount of insoluble cellulose was precipitated without accumulation of soluble cello oligosaccharides when glucose was mixed with αG1P and CDP. This phenomenon can be explained in terms of the large difference in acceptor reactivity between glucose and cello oligosaccharides. ¹H NMR spectrometric analysis revealed that this insoluble cellulose had an average degree of polymerization (DP) of nine. TEM observation, together with electron and X-ray diffraction studies, indicated that the insoluble cellulose formed platelet-shaped single lamellar crystals of cellulose II, several μm in length and several hundred nm in width; this is large compared to reported cellulose crystals. The thickness of the lamellar crystal is 4.5 nm, which is equivalent to a chain length of a cello oligosaccharide with DP nine and is consistent with the ¹H NMR spectroscopic results. These results suggest that cello oligosaccharides having an average DP of nine are synthesized in vitro by CDP when glucose is used as an acceptor, and the product forms highly crystalline cellulose II when it precipitates.     

Surface area and porosity of acid hydrolyzed cellulose nanowhiskers and cellulose produced by Gluconacetobacter xylinus

The physical parameters of cellulose such as surface area and porosity are important in the development of cellulose composites which may contain valuable additives which bind to cellulose. In this area, the use of acid hydrolyzed nano-dimensional cellulose nanowhiskers (CNWs) has attracted significant interest, yet the surface area and porosity of these materials have not been explored experimentally. The objective of this work was to characterize the surface area and porosity of CNWs from different origins (plant cotton/bacterium Gluconacetobacter xylinus) and different acid treatments (H₂SO₄/HCl) by N₂ adsorption; as well as to compare surface area and porosity of bacterial cellulose synthesized by static and agitated cultures. Our results showed that CNWs produced from H₂SO₄/HCl exhibited significantly increased surface area and porosity relative to starting material cotton fiber CF11. Micropores were generated in HCl hydrolyzed CNWs but not in H₂SO₄ hydrolyzed CNWs. Bacterial CNWs exhibited larger surface area and porosity compared to plant CNWs. Cellulose synthesized by G. xylinus ATCC 700178 from agitated cultures also exhibited less surface area and porosity than those from static cultures.     

Fractionation of transgenic corn seed by dry and wet milling to recover recombinant collagen‐related proteins

Corn continues to be considered an attractive transgenic host for producing recombinant therapeutic and industrial proteins because of its potential for producing recombinant proteins at large volume and low cost as coproducts of corn seed‐based biorefining. Efforts to reduce production costs have been primarily devoted to increasing accumulation level, optimizing protein extraction conditions, and simplifying the purification. In the present work, we evaluated two grain fractionation methods, dry milling and wet milling, to enrich two recombinant collagen‐related proteins; thereby, reducing the amount and type of corn‐derived impurities in subsequent protein extraction and purification steps. The two proteins were a full‐length human recombinant collagen type I alpha 1(rCIα1) chain with telopeptides and peptide foldon to effect triple helix formation and a 44‐kDa rCIα1 fragment. For each, ～60% of the rCIα1s in the seed was recovered in the dry‐milled germ‐rich fractions making up ca. 25% of the total kernel mass. For wet milling, ～60% of each was recovered in three fractions accounting for 20–25% of the total kernel mass. The rCIα1s in the dry‐milled germ‐rich fractions were enriched three to six times compared with the whole corn kernel, whereas the rCIα1s were enriched 4–10 times in selected wet‐milled fractions. The recovered starch from wet milling was almost free of rCIα1. Therefore, it was possible to generate rCIα1‐enriched fractions by both dry and wet milling along with rCIα1‐free starch using wet milling. Because of its simplicity, the dry milling procedure could be accomplished on‐farm thus minimizing the risk of inadvertent release of viable transgenic seeds. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Function of a low molecular peptide generated by cellulolytic fungi for the degradation of native cellulose

Peptides (MW < 5 kDa) produced by 57 cellulolytic fungi can form free radicals. Scanning tunneling microscopy (STM) and IR spectroscopy showed that the peptide produced by Trichoderma pseudokoningii can break the hydrogen bond network of cellulose. The synergic action of these peptides and cellulases increased production of reducing sugars during degradation of native cellulose.     

Degradation of cellulose by the major endoglucanase produced from the brown-rot fungus Fomitopsis pinicola

An endoglucanase that is able to degrade both crystalline and amorphous cellulose was purified from the culture filtrates of the brown-rot fungus Fomitopsis pinicola grown on cellulose. An apparent molecular weight of the purified enzyme was approximately 32 kDa by SDS-PAGE analysis. The enzyme was purified 11-fold with a specific activity of 944 U/mg protein against CMC. The partial amino acid sequences of the purified endoglucanase had high homology with endo-beta-1,4-glucanase of glycosyl hydrolase family 5 from other fungi. The K(m) and K(cat)values for CMC were 12 mg CMC/ml and 670/s, respectively. The purified EG hydrolyzed both cellotetraose (G4) and cellopentaose (G5), but did not degrade either cellobiose (G2) or cellotriose (G3).     

Characterization of a cellulose binding domain from Clostridium cellulovorans endoglucanase-xylanase D and its use as a fusion partner for soluble protein expression in Escherichia coli

Different chimeric proteins combining the non-catalytic C-terminal putative cellulose binding domain of Clostridium cellulovorans endoglucanase-xylanase D (EngD) with its proline-threonine rich region PT-linker, PTCBD(EngD), cellulose binding domain of C. cellulovorans cellulose binding protein A, CBD(CbpA), cohesin domains Cip7, Coh6 and CipC1 from different clostridial species and recombinant antibody binding protein LG were constructed, expressed, purified and analyzed. The solubilities of chimeric proteins containing highly soluble domains Cip7, CipC1 and LG were not affected by fusion with PTCBD(EngD). Insoluble domain Coh6 was solubilized when fused with PTCBD(EngD). In contrast, fusion with CBD(CbpA) resulted in only a slight increase in solubility of Coh6 and even decreased solubility of CipC1 greatly. PTCBD(EngD) and Cip7-PTCBD(EngD) were shown to bind regenerated commercial amorphous cellulose Cuprophan. The purity of Cip7-PTCBD(EngD) eluted from Cuprophan was comparable to that purified by conventional ion exchange chromatography. The results demonstrated that PTCBD(EngD) can serve as a bi-functional fusion tag for solubilization of fusion partners and as a domain for the immobilization, enrichment and purification of molecules or cells on regenerated amorphous cellulose.     

The rate of cellulose increase is highly related to cotton fibre strength and is significantly determined by its genetic background and boll period temperature

This experiment was conducted to study the relationship between the increase in cellulose content in developing cotton bolls and their final cotton fibre strength. The rate of cellulose increase over time was estimated using logistical regression, and the logistic equation parameters were then used to compare different cotton cultivars in different temperature environments. The increase in cellulose content followed a typical “S” curve, with the boll period time divided into slow-fast-slow stages. In different cultivars, the final fibre strength was closely related to the characters of the fast cellulose content increasing stage, negatively related to the maximal cellulose increasing rate (P < 0.05), and positively related to the duration of the fast cellulose content increasing stage (P < 0.01). In the same cultivar, low temperature reduced the maximal cellulose increasing rate and prolonged the duration of the fast cellulose increasing stage. The results indicate that, in diverse genetic background, long-lasting and tempered cellulose growth during the rapid cellulose increasing stage is of significant benefit to high strength fibre development. For closely related cotton cultivars, decreasing the maximal cellulose increasing rate and the termination of rapid cellulose increasing stage reduced fibre strength that often occurs when temperatures are low.     

Biosynthesis of hetero-polysaccharides by Acetobacter xylinum - Synthesis and characterization of metal-ion adsorptive properties of partially carboxymethylated cellulose

Biological reconstruction of water-soluble carboxymethylated cellulose (CMC; D.S. =0.47) has been achieved by culturing Acetobacter xylinum in medium containing CMC and -glucose to give a novel hetero-polysaccharide having a carboxymethyl function. The novel extracellular polysaccharide, carboxymethylated-bacterial cellulose (CM-BC), had an ion exchange ability with enhanced specific adsorption for lead and uranyl ions compared to the original CMC and bacterial cellulose. The contribution of the hydroxy group at C-2 was confirmed by applying carboxymethylated chitin, which possesses acetamido group at C-2 of the glucose residue, as the carbon source of the incubation.     

Characterization of intact glycopeptides reveals the impact of culture media on site-specific glycosylation of EPO-Fc fusion protein generated by CHO-GS cells

With the increasing demand to provide more detailed quality attributes, more sophisticated glycan analysis tools are highly desirable for biopharmaceutical manufacturing. Here, we performed an intact glycopeptide analysis method to simultaneously analyze the site-specific N- and O-glycan profiles of the recombinant erythropoietin Fc (EPO-Fc) protein secreted from a Chinese hamster ovary glutamine synthetase stable cell line and compared the effects of two commercial culture media, EX-CELL (EX) and immediate advantage (IA) media, on the glycosylation profile of the target protein. EPO-Fc, containing the Fc region of immunoglobulin G1 (IgG1) fused to EPO, was harvested at Day 5 and 8 of a batch cell culture process followed by purification and N- and O-glycopeptide profiling. A mixed anion exchange chromatographic column was implemented to capture and enrich N-linked glycopeptides. Using intact glycopeptide characterization, the EPO-Fc was observed to maintain their individual EPO and Fc N-glycan characteristics in which the EPO region presented bi-, tri-, and tetra-branched N-glycan structures, while the Fc N-glycan displayed mostly biantennary glycans. EPO-Fc protein generated in EX medium produced more complex tetra-antennary N-glycans at each of the three EPO N-sites while IA medium resulted in a greater fraction of bi- and tri-antennary N-glycans at these same sites. Interestingly, the sialylation content decreased from sites 1–4 in both media while the fucosylation progressively increased with a maximum at the final IgG Fc site. Moreover, we observed that low amounts of Neu5Gc were detected and the content increased at the later sampling time in both EX and IA media. For O-glycopeptides, both media produced predominantly three structures, N1F1F0SOG0, N1H1F0S1G0, and N1H1F0S2G0, with lesser amounts of other structures. This intact glycopeptide method can decipher site-specific glycosylation profile and provide a more detailed characterization of N- and O-glycans present for enhanced understanding of the key product quality attributes such as media on recombinant proteins of biotechnology interest.