Chitosan-dextran Sulfate Nanoparticles for Delivery of an Anti-angiogenesis Peptide

Summary A novel nanoparticle delivery system has been developed by employing the oppositely charged polymers chitosan (CS) and dextran sulfate (DS), and a simple coacervation process. Under the conditions investigated, the weight ratio of the two polymers is identified as a determining factor controlling particle size, surface charge, entrapment efficiency and release characteristics of the nanoparticles produced. Particles of 223 nm mean diameter were produced under optimal conditions with a zeta potential of approximately −32.6 mV. A maximum of 75% anti-angiogenesis peptide entrapment efficiency was achieved with a CS:DS weight ratio of 0.59∶1. The same nanoparticle formulation also showed slow and sustained peptide release over a period of 6 days. In contrast, the formulation containing a lower ratio of CS:DS (0.5∶1) was found to have reduced entrapment efficiency and more rapid peptide release characteristics. The results of this study suggest that physicochemical and release characteristics of the CS-DS nanoparticles can be modulated by changing ratios of two ionic polymers. The novel CS-DS nanoparticles prepared by the coacervation process have potential as a carrier for small peptides.     

Development of a chitosan-based nanoparticle formulation for delivery of a hydrophilic hexapeptide, dalargin

Nanoparticle based delivery systems can offer opportunities for targeting, controlled release, and enhanced stability of their drug, protein, or gene therapy payload. This study investigated the use of chitosan in combination with the ionic additives sulfobutyl-ether-7-beta-cyclodextrin (SB-CD) or SB-CD/dextran sulfate (SB-CD/DS) mixture in comparison with chitosan: DS in the formulation of nanoparticles incorporating the hexapeptide dalargin. The physical characteristics (particle size, zeta potential), entrapment and loading efficiency, and release of dalargin were quantified. It was demonstrated that anionic cyclodextrin, SB-CD, can be used in complex coacervation with chitosan, with and without the presence of DS, to form nanoparticles. The presence of SB-CD or DS in the nanoparticle formulation and the weight ratio of chitosan to anionic additive(s) influenced the physical properties of the nanoparticles and their ability to carry dalargin. In addition, the particle size of nanoparticles was also affected by the molecular weight of chitosan and DS. The use of either DS or SB-CD/DS mixture produced chitosan nanoparticles with small particle size, high dalargin entrapment efficiency, enhanced peptide stability, and sustained release characteristics.     

Development and Comparison of Different Nanoparticulate Polyelectrolyte Complexes as Insulin Carriers

The overall objective of our research is to produce polyanion/chitosan nanoparticulate oral delivery systems for insulin. Specific objectives of the present study were to study dextran sulfate or alginate complexation with chitosan on mean particle size, insulin association efficiency, loading capacity and release profile. Nanoparticles were formed by ionotropic complexation and coacervation between polyanions (dextran sulfate and alginate) and chitosan. Diameter was evaluated with photon correlation spectroscopy, polymer interaction was confirmed by DSC and FTIR and particle morphology was assessed by SEM and TEM. Mean nanoparticle diameter ranged from 423 to 850 nm, insulin association efficiency from 63 to 94% and loading capacity from 5 to 13%. Dextran sulfate provided highest insulin association efficiency and retention of insulin in gastric simulated conditions. These nanoparticle systems show promise as insulin and potentially other therapeutic polypeptides carriers.     

壳聚糖-有机累托石/海藻酸钠复合纳米粒的制备

目的:以BSA作为模型药物,制备壳聚糖季铵盐-OREC复合物纳米微粒,建立一种安全有效的药物控释传递系统。方法:超声条件下,制备不同质量比的具有壳聚糖硅酸盐插层结构的复合物纳米微粒,观察其形态学特征、进行红外光谱分析。同时,测定OREC对BSA包封率和载药量的影响。结果:成功制备了不同质量比的OREC-HTCC纳米粒子。电镜结果显示纳米粒呈圆球形,均匀,平均粒径约为30nm。红外图谱分析证实,HTCC插入了OREC插层中,BSA成功地包裹入HTCC-ALG/OREC混合材料制备的纳米微粒。加入OREC后,纳米粒子的包封率及载药量均明显提高,但随着加入量的增加,包封率及载药量逐渐减少。结论:OREC-HTCC纳米粒子是良好的蛋白药物载体,具有粒径小、包封率高、缓释效果好等优点,为CS-OREC作为潜在的药物给药系统的进一步应用提供科学依据。     

Oral bioavailability of insulin contained in polysaccharide nanoparticles

The pharmacological activity of insulin-loaded dextran sulfate/chitosan nanoparticles was evaluated following oral dosage in diabetic rats. Nanoparticles were mucoadhesive and negatively charged with a mean size of 500 nm, suitable for uptake within the gastrointestinal tract. Insulin association efficiency was over 70% and was released in a pH-dependent manner under simulated gastrointestinal conditions. Orally delivered nanoparticles lowered basal serum glucose levels in diabetic rats around 35% with 50 and 100 IU/kg doses sustaining hypoglycemia over 24 h. Pharmacological availability was 5.6 and 3.4% for the 50 and 100 IU/kg doses, respectively, a significant increase over 1.6%, determined for oral insulin alone in solution. Confocal microscopic examinations of FITC-labeled insulin nanoparticles showed adhesion to rat intestinal epithelium, and internalization of insulin within the intestinal mucosa. Encapsulation of insulin into dextran sulfate/chitosan nanoparticles was a key factor in the improvement of the bioavailability of its oral delivery over insulin solution.     

Stability,Intracellular Delivery,and Release of siRNA from Chitosan Nanoparticles Using Different Cross-Linkers

Chitosan (CS) nanoparticles have been extensively studied for siRNA delivery; however, their stability and efficacy are highly dependent on the types of cross-linker used. To address this issue, three common cross-linkers; tripolyphosphate (TPP), dextran sulphate (DS) and poly-D-glutamic acid (PGA) were used to prepare siRNA loaded CS-TPP/DS/PGA nanoparticles by ionic gelation method. The resulting nanoparticles were compared with regard to their physicochemical properties including particle size, zeta potential, morphology, binding and encapsulation efficiencies. Among all the formulations prepared with different cross linkers, CS-TPP-siRNA had the smallest particle size (ranged from 127 ± 9.7 to 455 ± 12.9 nm) with zeta potential ranged from +25.1 ± 1.5 to +39.4 ± 0.5 mV, and high entrapment (>95%) and binding efficiencies. Similarly, CS-TPP nanoparticles showed better siRNA protection during storage at 4˚C and as determined by serum protection assay. TEM micrographs revealed the assorted morphology of CS-TPP-siRNA nanoparticles in contrast to irregular morphology displayed by CS-DS-siRNA and CS-PGA-siRNA nanoparticles. All siRNA loaded CS-TPP/DS/PGA nanoparticles showed initial burst release followed by sustained release of siRNA. Moreover, all the formulations showed low and concentration-dependent cytotoxicity with human colorectal cancer cells (DLD-1), in vitro. The cellular uptake studies with CS-TPP-siRNA nanoparticles showed successful delivery of siRNA within cytoplasm of DLD-1 cells. The results demonstrate that ionically cross-linked CS-TPP nanoparticles are biocompatible non-viral gene delivery system and generate a solid ground for further optimization studies, for example with regard to steric stabilization and targeting.     

Developing a highly stable PLGA-mPEG nanoparticle loaded with cisplatin for chemotherapy of ovarian cancer

Background

Cisplatin is a potent anticancer drug, but its clinical application has been limited due to its undesirable physicochemical characteristics and severe side effects. Better drug formulations for cisplatin are highly desired.

Methodology/Principal Findings

Herein, we have developed a nanoparticle formulation for cisplatin with high encapsulation efficiency and reduced toxicity by using cisplatin-crosslinked carboxymethyl cellulose (CMC) core nanoparticles made from poly(lactide-co-glycolide)-monomethoxy-poly(polyethylene glycol) copolymers (PLGA-mPEG). The nanoparticles have an average diameter of approximately 80 nm measured by transmission electron microscope (TEM). The encapsulation efficiency of cisplatin in the nanoparticles is up to 72%. Meanwhile, we have also observed a controlled release of cisplatin in a sustained manner and dose-dependent treatment efficacy of cisplatin-loaded nanoparticles against IGROV1-CP cells. Moreover, the median lethal dose (LD₅₀) of the cisplatin-loaded nanoparticles was more than 100 mg/kg by intravenous administration, which was much higher than that of free cisplatin.

Conclusion

This developed cisplatin-loaded nanoparticle is a promising formulation for the delivery of cisplatin, which will be an effective therapeutic regimen of ovarian cancer without severe side effects and cumulative toxicity.     

Preparation and Characterization of SDF-1α-Chitosan-Dextran Sulfate Nanoparticles

Chitosan (CS) and dextran sulfate (DS) are charged polysaccharides (glycans), which form polyelectrolyte complex-based nanoparticles when mixed under appropriate conditions. The glycan nanoparticles are useful carriers for protein factors, which facilitate the in vivo delivery of the proteins and sustain their retention in the targeted tissue. The glycan polyelectrolyte complexes are also ideal for protein delivery, as the incorporation is carried out in aqueous solution, which reduces the likelihood of inactivation of the proteins. Proteins with a heparin-binding site adhere to dextran sulfate readily, and are, in turn, stabilized by the binding. These particles are also less inflammatory and toxic when delivered in vivo. In the protocol described below, SDF-1α (Stromal cell-derived factor-1α), a stem cell homing factor, is first mixed and incubated with dextran sulfate. Chitosan is added to the mixture to form polyelectrolyte complexes, followed by zinc sulfate to stabilize the complexes with zinc bridges. The resultant SDF-1α-DS-CS particles are measured for size (diameter) and surface charge (zeta potential). The amount of the incorporated SDF-1α is determined, followed by measurements of its in vitro release rate and its chemotactic activity in a particle-bound form.     

Preparation and characterization of biopolymeric nanoparticles used in drug delivery

Nanotechnology plays an important role in advanced biology and medicine research particularly in the development of potential site-specific delivery systems with lower drug toxicity and greater efficiency. These include microcapsules, liposomes, polymeric microspheres, microemulsions, polymer micelles, hydrogels, solid nanoparticles etc. In the present study, preparation and characterization of biopolymeric gelatin nanoparticles for encapsulating the antimicrobial drug sulfadiazine and its in vivo drug release in phosphate buffer saline (PBS) have been investigated. The nanoparticles prepared by second desolvation process varied in a size range 200 nm and 600 nm with a drug entrapment efficiency of 50% characterized by atomic force microscopy and dynamic light scattering. The drug release from the nanoparticles occurred up to 30% in a controlled manner.     

Self-assembled DNA-based giant thrombin nanoparticles for controlled release

Protein-aptamer interactions have been used in a wide range of fields, including medical diagnosis and protein delivery. Herein, we report a method for thrombin delivery with thrombin-binding aptamer (TBA), which is one of the well-known aptamers for thrombin, by generating giant thrombin nanoparticles (GTNPs). GTNPs can be synthesized by crosslinking thrombin with DNA nanostructures that possess several TBA molecules. To generate GTNPs, two different DNA nanostructures were used. Y-shaped DNA with TBA and X-shaped DNA with TBA were used for 250 and 650 nm GTNPs, respectively. Controlled release of thrombin from GTNPs was performed by adding complementary DNA (cDNA) to TBA. To investigate thrombin release from GTNPs, the sizes of the GTNPs were measured using dynamic light scattering, atomic force microscopy (AFM), and scanning electron microscopy (SEM). We confirmed a decrease in the size of GTNPs with various concentrations of cDNA, suggesting the release of thrombin. Based on these results, we expect that our method can be used to control the amount of thrombin released effectively. Our method is also widely applicable for effective protein delivery.     

Preparation and evaluation of thiol-modified gelatin nanoparticles for intracellular DNA delivery in response to glutathione

To enhance the intracellular delivery potential of plasmid DNA using nonviral vectors, we have developed thiolated gelatin nanoparticles that can release the payload in the highly reducing environment, such as in response to glutathione. Thiolated gelatin was synthesized by covalent modification of the primary amino groups of Type B gelatin using 2-iminothiolane (Traut's reagent). The degree of thiolation of the polymers ranged from 0 to 43.71 mmol of reduced sulfhydryl (SH) groups when the amount of 2-iminothiolane was increased up to 100 mg per gram of the biopolymer. Cytotoxicity evaluations carried out by the formazan (MTS) assay showed that the thiolated gelatin prepared with 20 mg and 40 mg of 2-iminothiolane (SHGel-20 and SHGel-40) per gram of gelatin had comparable cell viability profile to that of the unmodified gelatin. In vitro release studies of fluorescein isothiocyanate (FITC)-labeled dextran (mol wt. 70 000 Da), when encapsulated in gelatin and thiolated gelatin nanoparticles (150-250 nm in diameter), was found to be affected by the presence of glutathione (GSH) in the medium. The presence of GSH was found to enhance the release by about 40% in case of thiolated gelatin and about 20% in gelatin nanoparticles under similar conditions of temperature and GSH concentrations. Qualitative and quantitative analysis of transfection in NIH-3T3 murine fibroblast cells by the nanoparticles carrying plasmid DNA encoding for enhanced green fluorescent protein (EGFP-N1) was done by fluorescence confocal microscopy and fluorescence-activated cell sorting (FACS). Qualitative results showed highly efficient expression of GFP that remained stable for up to 96 h. Quantitative results from FACS showed that the thiolated gelatin nanoparticles (SHGel-20) were significantly more effective in transfecting NIH-3T3 cells than other carrier systems examined. The results of this study show that thiolated gelatin nanoparticles would serve as a biocompatible intracellular delivery system that can release the payload in a highly reducing environment.     

Etoposide-loaded nanoparticles made from glyceride lipids: Formulation,characterization, in vitro drug release,and stability evaluation

The aim of the study was to prepare etoposide-loaded nanoparticles with glyceride lipids and then characterize and evaluate the in vitro steric stability and drug release characteristics and stability. The nanoparticles were prepared by melt emulsification and homogenization followed by spray drying of nanodispersion. Spray drying created powder nanoparticles with excellent redispersibility and a minimal increase in particle size (20–40 nm). Experimental variables, such as homogenization pressure, number of homogenization cycles, and surfactant concentration, showed a profound influence on the particle size and distribution. Spray drying of Poloxamer 407-stabilized nanodispersion lead to the formation of matrix-like structures surrounding the nanoparticles, resulting in particle growth. The in vitro steric stability test revealed that the lipid nanoparticles stabilized by sodium tauroglycocholate exhibit excellent steric stability compared with Poloxamer 407. All 3 glyceride nanoparticle formulations exhibited sustained release characteristics, and the release pattern followed the Higuchi equation. The spray-dried lipid nanoparticles stored in black polypropylene containers exhibited excellent long-term stability at 25°C and room light conditions. Such stable lipid nanoparticles with in vitro steric stability can be a beneficial delivery system for intravenous administration as long circulating carriers for controlled and targeted drug delivery. Published: September 30, 2005     

Optimisation of Dex-GMA nanoparticles prepared in modified micro-emulsion system: Physical and biologic characterization

In recent years, utilizing nanoparticles as delivery system for drug targeting delivery has raised increasing interest. In this study, glycidyl methacrylate derivatized dextran (Dex-GMA) nanoparticles encapsulating basic fibroblast growth factor (bFGF) have been prepared inside the aqueous cores of sodium bis(2-ethylhexyl) sulfosuccinate (AOT)/n-hexane reverse micelles. These nanoparticles were identified to be uniformly spherical in shape with an average size of 109.57 ± 2.09 nm. And 90.2% of the nanoparticles were in a narrow size range of 80–110 nm. The release of bFGF from the nanoparticles is completely and sustained as long as 35 days. The impact of the nanoparticles on mouse bone marrow mesenchymal stem cells (BMSCs) was assessed with cell cytotoxicity/viability and adhesion assay. Those studies show that the Dex-GMA nanoparticles prepared by water-in-oil micro-emulsion systems with aprotic solvent adding are novel, effective and biocompatible delivery system for bioactive protein.     

Enhanced anti-topoisomerase II activity by mucoadhesive 4-CBS–chitosan/poly (lactic acid) nanoparticles

In this study, the biodegradable mucoadhesive 4-carboxybenzensulfonamide chitosan (4-CBS–chitosan)/poly (lactic acid) (PLA) nanoparticles were fabricated by the electrospray ionization technique for enhancing anti-topoisomerase II (Topo II) activity. The obtained (4-CBS–chitosan/PLA)-DOX nanoparticles were characterized using SEM, particle size analyzer. We emphasis on encapsulation efficiency, in vitro drug release behavior and also performed in vitro studies of Topo II inhibitory activity using gel electrophoresis. In addition, the cytotoxicity of the 4-CBS–chitosan/PLA nanoparticles using MTT assay was also studied. The mean particle size of spherical shaped (4-CBS–chitosan/PLA)-DOX is less than 300 nm. The DOX loaded 4-CBS–chitosan/PLA composite nanoparticles produced high entrapment efficiency of 85.8% and provided the prolonged release of DOX extended to 26 days and also still had strong Topo II inhibitory activity up to 77.4%. Overall, it was shown that 4-CBS–chitosan/PLA nanoparticles could be promising carriers for controlled delivery of anticancer drugs.     

Designing chitosan-dextran sulfate nanoparticles using charge ratios

The purpose of this study was to examine the effect of charge ratio on the formation and properties of the chitosan (CS)-dextran sulfate (DS) nanoparticles developed for the delivery of water-soluble small and large molecules, including proteins. Rhodamine 6G (R6G) and bovine serum albumin (BSA) were chosen as model molecules. CS-DS nanoparticles were formulated by a complex coacervation process under mild conditions. The influence of formulation and process variables, including the charge ratio of the 2 ionic polymers, on particle size, zeta potential, and nanoparticle entrapment of R6G and BSA was studied. The in vitro release of R6G and BSA was also evaluated, and the integrity of BSA in the release fraction was assessed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Depending on the concentration and charge ratio of DS and CS, nanoparticles with varied size (>or=244 nm) and zeta potential (-47.1-60 mV) were obtained. High entrapment efficiency (98%) was achieved for both R6G and BSA when the charge ratio of the 2 ionic polymers was greater than 1.12. The release of both R6G and BSA from nanoparticles was based on the ion-exchange mechanism. BSA showed much slower continuous release for up to 7 days while still maintaining its integrity for an extended period. The CS-DS nanoparticles developed based on the modulation of charge ratio show promise as a system for controlled delivery of both small and large molecules, including proteins.     

Synthesis and characterization of pH-dependent glycol chitosan and dextran sulfate nanoparticles for effective brain cancer treatment

A novel drug delivery system for the treatment of brain tumors was formulated by methotrexate (MTX)-loaded polymeric nanoparticles (NPs) based on Glycol chitosan (GCS) and Dextran sulfate (DS). The physicochemical properties of resulting particles were investigated, evidencing the contribution of these nanoparticles for brain targeting. In vitro release of MTX was also evaluated. The GCS-DS nanoparticles have been developed based on the modulation of ratio show promise as a system for controlled delivery of the drug to the brain.     

Investigations of the effect of the lipid matrix on drug entrapment, in vitro release, and physical stability of olanzapine-loaded solid lipid nanoparticles

The purpose of this research was to study the effect of the lipid matrix on the entrapment of olanzapine (OL). OL-loaded solid lipid nanoparticles (SLNs) were prepared using lipids like glyceryl monostearate (GMS), Precirol ATO 5 (PRE), glyceryl tristearate (GTS), and Witepsol E85 (WE 85)--and poloxamer 407 and hydrogenated soya phosphatidylcholine as stabilizers--using a hot melt emulsification high-pressure homogenization technique, and then characterized by particle size analysis, zeta potential, differential scanning calorimetry (DSC), and powder X-ray diffraction (pXRD). Homogenization at 10,000 psi for 3 cycles resulted in the formation of SLNs with a mean particle size of approximately 190 nm for the 4 lipids investigated. The highest partition coefficient for OL between the melted lipid and pH 7.4 phosphate buffer (pH 7.4 PB) was obtained with GTS. The entrapment efficiency was in the following order: GTS SLNs > PRE SLNs > WE 85 SLNs > GMS SLNs. DSC and pXRD showed that much of the incorporated fraction of OL existed in the amorphous state after incorporation into SLNs. A sharp increase in the flocculation of the SLN dispersions was observed upon addition of 0.6 M aqueous sodium sulfate solution. Nanoparticle surface hydrophobicity was in the following order: GTS SLNs > PRE SLNs > WE 85 SLNs > GMS SLNs. A significant increase in size and zeta potential was observed for GTS SLN and WE 85 SLN dispersions stored at 40 degrees C. Release of OL from the SLNs was sustained up to 48 hours in pH 7.4 PB and obeyed Higuchi's release kinetics.     

Adriamycin release from poly(lactide-coglycolide)-polyethylene glycol nanoparticles: synthesis, and in vitro characterization

The preparation, properties, and application in adriamycin delivery ofbiocompatible and biodegradable poly(lactide-co-glycolide)-polyethylene glycol (PLGA-PEG) nanoparticles are discussed. PLGA-PEG copolymers were synthesized by ring opening polymerization of the dl-lactide and glycolide in the presence of PEG1000. 1H-NMR and FT-IR spectrum were consistent with the structure of PLGA-PEG copolymers. The adriamycin-loaded nanoparticles could be prepared using a precipitation-solvent evaporation technique. The nanoparticles have been produced by a precipitation-solvent evaporation technique. The physical characteristics and drug loading efficiency of the PLGA-PEG nanoparticles were influenced by the composition of the PLGA-PEG copolymers used to prepare the nanoparticles. Particle sizes were between 65 and 100 nm for different compositions of PLGA-PEG copolymers. PLGA-PEG nanoparticles prepared from copolymers having relatively high PLGA/PEG ratios were smaller. Entrapment efficiency was 25%-33%. Adriamycin release from the nanoparticles at pH 7.4 showed an initial burst release and then sustained release phase. These results showed that PLGA-PEG nanoparticles could be an effective carrier for cancer therapy.     

Preparation and evaluation of warfarin-β-cyclodextrin loaded chitosan nanoparticles for transdermal delivery

The main objective of the present work was to prepare warfarin-β-cyclodextrin (WAF-β-CD) loaded chitosan (CS) nanoparticles for transdermal delivery. CS is a hydrophilic carrier therefore, to overcome the hydrophobic nature of WAF and allow its incorporation into CS nanoparticles, WAF was first complexed with β-cyclodextrin (β-CD). CS nanoparticles were prepared by ionotropic pre-gelation using tripolyphosphate (TPP). Morphology, size and structure characterization of nanoparticles were carried out using SEM, TEM and FTIR, respectively. Nanoparticles prepared with 3:1 CS:TPP weight ratio and 2mg/ml final CS concentration were found optimum. They possessed spherical particles (35±12nm diameter) with narrow size distribution (PDI=0.364) and 94% entrapment efficiency. The in vitro release as well as the ex vivo permeation profiles of WAF-β-CD from the selected nanoparticle formulation were studied at different time intervals up to 8h. In vitro release of WAF-β-CD from CS nanoparticles followed a Higuchi release profile whereas its ex vivo permeation (at pH 7.4) followed a zero order permeation profile. Results suggested that the developed WAF-β-CD loaded CS carrier could offer a controlled and constant delivery of WAF transdermally.     

Development of a temperature-sensitive composite hydrogel for drug delivery applications

To develop materials with improved controllability and specificity, we have investigated composite hydrogels with temperature-sensitive properties using photo cross-linking. Specifically, our novel composite materials are composed of nanoparticles made of poly(N-isopropylacrylamide) (PNIPAAm), temperature-sensitive hydrogels, and a photo cross-linker, poly(ethylene glycol) diacrylate (PEGDA). PNIPAAm particles were synthesized by emulsion polymerization and by varying concentration of four main factors: monomers (N-isopropylacrylamide), cross-linkers (N,N'-methylenebisacrylamide), surfactants (sodium dodecyl sulfate, SDS), and initiators (potassium persulfate). We found that the surfactant, SDS, was the most important factor affecting the particle size using the factorial design analysis. Additionally, both nano- and micro-PNIPAAm particles had excellent loading efficiency (>80% of the incubated bovine serum albumin (BSA)), and their release kinetics expressed an initial burst effect followed by a sustained release over time. Furthermore, BSA-loaded PNIPAAm nanoparticles were used to form three-dimensional gel networks by means of a photocuring process using a photo cross-linker, PEGDA, and a photoinitiator, Irgacure-2959 (I-2959). Results from scanning electron microscopy and in vitro BSA release studies from these hydrogels demonstrated that PNIPAAm nanoparticles were embedded inside the PEG polymeric matrix and the composite material was able to release BSA in response to changes in temperature. These PNIPAAm nanoparticle hydrogel networks may have advantages in applications of controlled drug delivery systems because of their temperature sensitivity and their ability of in situ photopolymerization to localize at the specific region in the body.