Antibodies to junctional sarcoplasmic reticulum proteins: probes for the Ca2+-release channel.

The junctional face membrane plays a key role in excitation-contraction coupling in skeletal muscle. A protein of 350 kDa, tentatively identified as a component of the junctional feet, connects transverse tubules to terminal cisternae of sarcoplasmic reticulum [Kawamoto, Brunschwig, Kim & Caswell (1986) J. Cell Biol. 103, 1405-1414]. The membrane topology and protein composition of sarcoplasmic reticulum Ca2+-release channels of rabbit skeletal muscle were investigated using an immunological approach, with anti-(junctional face membrane) and anti-(350 kDa protein) polyclonal antibodies. Upon preincubation of the terminal cisternae with anti-(junctional face membrane) antibodies, Ca2+-ATPase and Ca2+-loading activities were not affected, whereas anti-(350 kDa protein) antibodies stimulated Ca2+-ATPase activity by 25% and inhibited Ca2+-loading activity by 50% (at an antibody/terminal cisternae protein ratio of 1:1). Specific photolabelling of terminal cisternae proteins with [14C]doxorubicin was prevented by both anti-(junctional face membrane) and anti-(350 kDa protein) antibodies. Stimulation of Ca2+ release by doxorubicin was prevented by both anti-(junctional face membrane) and anti-(350 kDa protein) antibodies. Half-maximal inhibition was obtained at an antibody/terminal cisternae protein ratio of 1:1. Kinetic measurements of Ca2+ release indicated that anti-(350 kDa protein) antibodies prevented Ca2+-induced Ca2+ release, whereas the ATP-stimulation and the inhibition by Mg2+ were not affected. These results suggest that: (i) Ca2+- and doxorubicin-induced Ca2+ release is mediated by Ca2+ channels which are selectively localized in the junctional face membrane; (ii) the 350 kDa protein is a component of the Ca2+-release channel in native terminal cisternae vesicles; and (iii) the Ca2+-activating site of the channel is separate from other allosteric sites.     

Separation of dihydropyridine binding sites from cardiac junctional sarcoplasmic reticulum

When microsomes from feline ventricular muscle are centrifuged on continuous linear sucrose gradients, the major peak for the distribution pattern of the dihydropyridine binding sites corresponds in position and shape with the distribution of the Mr 300K polypeptide marker for junctional sarcoplasmic reticulum (SR). Plasma membrane vesicles are also present in those gradient fractions and appear to be joined to the junctional SR as native dyads. We now report that when such putative dyads are passed through the French press, both the dihydropyridine binding sites and the plasma membrane marker band together at a new isopycnic point distinct from the junctional SR. We conclude that as has been found in the skeletal muscle system the dihydropyridine binding sites are a marker for the junctional domain of the plasma membrane and that separation of the dyad components of the mammalian myocardium can be attained.     

ATP and Ca binding by the Ca pump protein of sarcoplasmic reticulum

The binding of ATP and Ca²⁺ by the Ca²⁺ pump protein of sarcoplasmic reticulum from rabbit skeletal muscle has been studied and correlated with the formation of a phoshorylated intermediate. The Ca²⁺ pump protein has been found to contain one specific ATP and two specific Ca²⁺ binding sites per phosphorylation site. ATP binding is dependent on Mg²⁺ and is severely decreased when a phosphorylated intermediate is formed by the addition of Ca²⁺. In the presence of Mg²⁺ and the absence of Ca²⁺, ATP and ADP bind completely to the membrane. Pre-incubation with N-ethylmaleimide results in inhibition of ATP binding and decrease of Ca²⁺ binding. In the absence of ATP, Ca²⁺ binding is noncooperative at pH 6–7 and negatively cooperative at pH 8. Mg²⁺, Sr²⁺ and La³⁺, in that order, decrease Ca²⁺ binding by the Ca²⁺ pump protein. The affinity of the Ca²⁺ pump protein for both ATP and Ca²⁺ increases when the pH is raised from 6 to 8. At the infection point (pH ≈ 7.3) the binding constants of the Ca²⁺ pump protein-MgATP²⁻ and Ca²⁺ pump protein-calcium complexes are approx. 0.25 and 0.5 μM⁻¹, respectively. The unphosphorylated Ca²⁺ pump protein does not contain a Mg²⁺ binding site with an affinity comparable to those of the ATP and Ca²⁺ binding sites.The affinity of the Ca²⁺ pump protein for Ca²⁺ is not appreciably changed by the addition of ATP. The ratio of phosphorylated intermediate formed to bound Ca²⁺ is close to 2 over a 5-fold range of phosphoenzyme concentration. The equilibrium constant for phosphoenzyme formation is less than one at saturating levels of Ca²⁺. The phosphoenzyme is thus a “high-energy” intermediate, whose energy may then be used for the translocation of the two Ca²⁺.A reaction scheme is discussed showing that phosphorylation of sarcoplasmic reticulum proceeds via an enzyme-Ca₂²⁺-MgATP²⁻ complex. This complex is then converted to a phosphoenzyme intermediate which binds two Ca²⁺ and probably Mg²⁺.     

Calcium binding proteins in the sarcoplasmic/endoplasmic reticulum of muscle and nonmuscle cells

In this paper we review some of the large quantities of information currently available concerning the identification, structure and function of Ca²⁺-binding proteins of endoplasmic and sarcoplasmic reticulum membranes. The review places particular emphasis on identification and discussion of Ca²⁺ storage proteins in these membranes. We believe that the evidence reviewed here supports the contention that the Ca²⁺-binding capacity of both calsequestrin and calreticulin favor their contribution as the major Ca²⁺-binding proteins of muscle and nonmuscle cells, respectively. Other Ca²⁺-binding proteins discovered in both endoplasmic reticulum and sarcoplasmic reticulum membranes probably contribute to the overall Ca²⁺ storage capacity of these membrane organelles, and they also play other important functional role such as posttranslational modification of newly synthesized proteins, a cytoskeletal (structural) function, or movement of Ca²⁺ within the lumen of the sarcoplasmic/endoplasmic reticulum towards the storage sites.Abbreviations SR Sarcoplasmic Reticulum - ER Endoplasmic Reticulum - InsP₃ Inositol 1,4,5-trisphosphate - SDS-PAGE Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis - PDI Protein Disulphide Isomerase - T₃BP Thyroid Hormone Binding Protein - Grp Glucose regulated proteins - HCP Histidine-rich Ca²⁺ binding Protein - LDL Low Density Lipoprotein     

Calcium binding and allosteric signaling mechanisms for the sarcoplasmic reticulum Ca(2+) ATPase

The sarcoplasmic reticulum Ca(2+) ATPase (SERCA) is a membrane-bound pump that utilizes ATP to drive calcium ions from the myocyte cytosol against the higher calcium concentration in the sarcoplasmic reticulum. Conformational transitions associated with Ca(2+) -binding are important to its catalytic function. We have identified collective motions that partition SERCA crystallographic structures into multiple catalytically-distinct states using principal component analysis. Using Brownian dynamics simulations, we demonstrate the important contribution of surface-exposed, polar residues in the diffusional encounter of Ca(2+) . Molecular dynamics simulations indicate the role of Glu309 gating in binding Ca(2+) , as well as subsequent changes in the dynamics of SERCA's cytosolic domains. Together these data provide structural and dynamical insights into a multistep process involving Ca(2+) binding and catalytic transitions.     

Calcium and lanthanide binding in the sarcoplasmic reticulum ATPase

The interactions of calcium and lathanides with the sarcoplasmic reticulum ATPase, and their respective ability to activate the enzyme, were studied by direct measurements of binding with radioactive tracers, functional effects on the ATPase partial reactions, changes in the quantum yield of tryptophanyl residues and a covalently bound fluorescein label (fluorescein 5-isothiocyanate, FITC), and energy transfer between bound lanthanide and fluorescent labels. We find that: (a) Lanthanides displace calcium from specific ATPase sites with diphasic kinetics that are consistent with sequential exchange. (b) Lanthanides in excess of the calcium stoichiometry are mostly bound to sarcoplasmic reticulum lipids and non-ATPase proteins. (c) Both calcium and lanthanides activate the ATPase and allow formation of the phosphorylated intermediate by utilization of ATP; however, hydrolytic cleavage of the intermediate formed in the presence of lanthanides occurs at a slower rate than the intermediate formed in the presence of calcium. (d) In contrast to a calcium-dependent change in the quantum yield of both the tryptophanyl residues (transmembrane region) and the FITC label (extramembranous region), lanthanides induce only a change in the quantum yield of the FITC label. (e) Measurements of energy transfer between bound lanthanide and fluorescent labels detect lanthanide bound midway between the catalytic site in the globular region of the ATPase outside the membrane, and the transmembrane calcium binding domain which is involved in enzyme activation (Clarke, D. M., Loo, T. W., Inesi, G., and MacLennan, D. H. (1989a) Nature 339, 476-478). It is apparent that cation bound in this midway location controls exchange of calcium bound in the transmembrane region. The possibility that the midway location may provide a domain for binding of a second calcium is discussed.     

The Ca2+ release channel in junctional sarcoplasmic reticulum: gating and blockade by cations.

1. By using a sarcoplasmic reticulum preparation containing feet structures and the 45Ca2+/filtration technique, the opening and closing response of the Ca(2+)-channel was studied. 2. Extravesicular Sr2+ can activate the channel even though this cation is less efficient than Ca2+ in stimulating the Ca2+ release. Higher Sr2+ concentrations display inhibitory action. 3. By studying the closing response high- and low-affinity cations can be distinguished, according to the concentration range required to exert their effect. 4. The synergistic behavior observed by combining high- and low-affinity blocking cations suggest that they interact through the same binding site. 5. The high-and low-affinity cations are noncompetitive blockers of the activating Ca2+ suggesting the existence of an inhibitory site which is different to the activating site.     

Intralumenal sarcoplasmic reticulum Ca(2+)-binding proteins

The sarcoplasmic reticulum (SR) controls the level of intracellular Ca2+ in cardiac and skeletal muscle by storing and releasing Ca2+. A set of intralumenal SR Ca(2+)-binding proteins has been identified that may serve important roles in SR Ca2+ storage and mobilization. The most prominent of these SR proteins, calsequestrin, is discretely localized to junctional SR. Other intralumenal proteins are more widely distributed throughout the SR. All of these intralumenal SR Ca(2+)-binding proteins are acidic, stain blue with dye Stains-All, and appear to be substrates for casein kinase II. The biochemistry and cell biology of lumenal SR proteins may conform to a paradigm now emerging from the study of endoplasmic reticulum proteins.     

Trypsin digestion of junctional sarcoplasmic reticulum vesicles

A putative constituent of the junctional processes, connecting the terminal cisternae of sarcoplasmic reticulum and the transverse tubules of skeletal muscle fibers, is a greater than or equal to 350,000-dalton (Da) protein that displays ryanodine binding and Ca2+ channel properties. Ryanodine modulation of Ca2+ fluxes suggests that the ryanodine receptor and calcium channel are integral parts of one functional unit corresponding to the greater than or equal to 350,000-Da protein [Inui, M., Saito, E., & Fleischer, S. (1987) J. Biol. Chem. 262, 1740-1747; Campbell, K. P., Knudson, C. M., Imagawa, T., Leung, A. L., Sutko, J. L., Kahl, S. D., Raab, C. R., & Madson, L. (1987) J. Biol. Chem. 262, 6460-6463]. We subjected vesicular fragments of junctional-cisternal membrane to stepwise trypsin digestion. The greater than or equal to 350,000-Da protein is selectively cleaved in the early stage of digestion, with consequent disappearance of the corresponding band in electrophoretic gels. The Ca2+-ATPase is cleaved at a later stage, while calsequestrin is not digested under the same experimental conditions. While the Ca2+-ATPase yields two complementary fragments that are relatively resistant to further digestion, the greater than or equal to 350,000-Da protein yields fragments that are rapidly broken down to small peptides. Under conditions producing extensive digestion of the greater than or equal to 350,000-Da protein, the junctional processes are still visualized by electron microscopy, with no discernible alterations of their ultrastructure. The functional properties of the Ca2+ release channel are also maintained following trypsin digestion, including blockage by Mg2+ and ruthenium red and activation by Ca2+ and nucleotides.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interdependence of ryanodine binding, oligomeric receptor interactions, and Ca2+ release regulation in junctional sarcoplasmic reticulum

We have examined ryanodine binding to its receptor (RR) and compared its effect on Ca2+ release to the Ca2+ release triggered by Ca2+ plus ATP, using vesicular fragments of junctional terminal cisternae (JTC) obtained from skeletal muscle. Ryanodine binding is slow (taking hours or days to complete) and is highly temperature (Q10 = 4) and Ca2+ dependent. At equilibrium, the extent of binding increases as the concentration of ryanodine is raised above 10(-9) M, exhibiting negative cooperativity and reaching the stoichiometry of the 560,000-Da RR chains near 10(-5) M ryanodine. The specificity of the high affinity binding is demonstrated by competitive binding of ryanodine analogs. Kinetic studies using rapid filtration show that, in the absence of ryanodine, rapid (k = 15 s-1) release of Ca2+ follows a triggering exposure of loaded JTC vesicles to perfusion media containing Ca2+ plus ATP. Induction of this release has no lag period and displays minimal temperature dependence. In contrast, prolonged exposure of JTC vesicles to low (10(-7) M) ryanodine concentrations changes the JTC to a state permitting slow (k = 1 s-1) release of Ca2+ even in the absence of the Ca2+ plus ATP trigger. Higher (greater than microM) concentrations of ryanodine do not allow any Ca2+ release and prevent even the release normally triggered by Ca2+ plus ATP. Our data suggest that ryanodine binds to the open state of the tetrameric RR, inducing protein conformational changes and altered oligomeric interactions. Binding of the first molecule of ryanodine to one of the four binding sites on the receptor produces a partially closed and low conductance state of the Ca2+ release channel and reduces the ryanodine binding affinity of the remaining sites. Ryanodine occupancy of all four binding sites on the receptor completes closure of the Ca2+ channel and blocks the triggering action of Ca2+ plus ATP. The tetrameric association of the RR chains is demonstrated by crosslinking with bifunctional reagents, generating crosslinked tetramers that retain ryanodine binding and Ca2+ release functions.     

Calcium binding to the transmembrane domain of the sarcoplasmic reticulum Ca2+-ATPase: insights from molecular modeling

Sarcoplasmic reticulum Ca(2+)- ATPase pumps Ca(2+) ions from muscle cells to the sarcoplasmic reticulum. Here we use molecular dynamics and electrostatic modeling to investigate structural and dynamical features of key intermediates in the Ca(2+) binding process of the protein. Structural models of the protein (containing either two, one, or no calcium ions in the transmembrane domain) are constructed based on the X-ray structure by Toyoshima et al. (Nature 2000;405:647-655). The protein is embedded in a water/octane bilayer, which mimics the water/membrane environment. Our calculations provide information on the hydration of the two Ca(2+) ions, not emerging from the X-ray structure. Furthermore, they indicate that uptake of the metal ions causes large structural rearrangements of the metal binding sites. In addition, they suggest that the two ions reach their binding sites via two specific pathways. Finally, they allow identification of residues in the outer mouth of the protein that might interact with the Ca(2+) ions during the binding process.     

Differentiation between Ca2+ transport and ATP-induced Ca2+ binding by sarcoplasmic reticulum

The Ca²⁺ actively accumulated by sarcoplasmic reticulum isolated from skeletal muscle is composed of two fractions; one represented by intravesicular free Ca²⁺ and another represented by Ca²⁺ selectively bound to the membranes. Both of these Ca²⁺ fractions depend on ATP, although it is not clear whether ATP hydrolysis is essential for accumulation of the second Ca²⁺ fraction. The existence of the membrane-bound Ca²⁺ induced by ATP is clearly shown in experiments in which the Ca²⁺ retention by sarcoplasmic reticulum is measured in the presence and in the absence of X-537A, a Ca²⁺ ionophore, which makes the membrane permeable to Ca²⁺. Thus, in the presence of X-537A all Ca²⁺ accumulated due to ATP is bound to the membranes. This membrane-bound Ca²⁺ represents about 30 nmol/mg protein in the range of external $\text{p}\text{Ca}$ values of 7 to 3.5. The magnitude of this Ca²⁺ fraction is slightly higher whether or not the experiments are performed in the presence of oxalate, which greatly increased the intravesicular Ca²⁺ accumulation. Furthermore, taking advantage of the impermeability of sarcoplasmic reticulum to EGTA, it is possible to show the existence of the membrane-bound Ca²⁺ as a distinct fraction from that which exists intravesicularly.     

The unraveling architecture of the junctional sarcoplasmic reticulum

The sarcoplasmic reticulum (SR) of skeletal muscle controls the contraction-relaxation cycle by raising and lowering the myoplasmic free-Ca²⁺ concentration. The coupling between excitation, i.e., depolarization of sarcolemma and transvers tubule (TT) and Ca²⁺ release from the terminal cisternae (TC) of SR takes place at the triad. The triad junction is formed by a specialized region of the TC, the junctional SR, and the TT. The molecular architecture and protein composition of the junctional SR are under active investigation. Since the junctional SR plays a central role in excitation-contraction coupling and Ca²⁺ release, some of its protein constituents are directly involved in these processes. The biochemical evidence supporting this contention is reviewed in this article.     

Trypsin destruction of the high affinity ryanodine binding sites of the junctional sarcoplasmic reticulum

Tryptic digestion of the junctional sarcoplasmic reticulum membranes in sucrose but not NaCl buffer leads to complete loss of ryanodine binding capacity. The presence of MgCl2 in the sucrose buffer prevents the loss of ryanodine binding by the trypsin treatment. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the treated membranes reveal that the 400-kDa protein band disappeared under all the different digestion conditions. However, the presence of 135-kDa tryptic fragment is observed only when ryanodine binding is retained. Quantitative analysis of the gels shows that the loss of ryanodine binding is well correlated with the cleavage of the 135-kDa tryptic fragment. This correlation is obtained when the cleavage was controlled either by the digestion time or by NaCl or MgCl2 concentrations. The same concentrations of MgCl2 and NaCl affect the ryanodine binding activity, the cleavage of the 135-kDa tryptic fragment, and the solubility and stability of the [3H]ryanodine-receptor complex in a detergent-containing medium. Tryptic digestion of the ryanodine receptor/junctional Ca2+ release channel, which leads to complete loss of ryanodine binding capacity, has no effect or slightly stimulates the Ca2+ accumulation activity of these membranes.