Immobilized Pseudomonas cepacia lipase for biodiesel fuel production from soybean oil

Enzymatic transesterification of soybean oil with methanol and ethanol was studied. Of the nine lipases that were tested in the initial screening, lipase PS from Pseudomonas cepacia resulted in the highest yield of alkyl esters. Lipase from Pseudomonas cepacia was further investigated in immobilized form within a chemically inert, hydrophobic sol-gel support. The gel-entrapped lipase was prepared by polycondensation of hydrolyzed tetramethoxysilane and iso-butyltrimethoxysilane. Using the immobilized lipase PS, the effects of water and alcohol concentration, enzyme loading, enzyme thermal stability, and temperature in the transesterification reaction were investigated. The optimal conditions for processing 10 g of soybean oil were: 35 degrees C, 1:7.5 oil/methanol molar ratio, 0.5 g water and 475 mg lipase for the reactions with methanol, and 35 degrees C, 1:15.2 oil/ethanol molar ratio, 0.3 g water, 475 mg lipase for the reactions with ethanol. Subject to the optimal conditions, methyl and ethyl esters formation of 67 and 65 mol% in 1h of reaction were obtained for the immobilized enzyme reactions. Upon the reaction with the immobilized lipase, the triglycerides reached negligible levels after the first 30 min of the reaction and the immobilized lipase was consistently more active than the free enzyme. The immobilized lipase also proved to be stable and lost little activity when was subjected to repeated uses.     

Synthesis of esters using a nylon-immobilized lipase in batch and continuous reactors.

Direct esterifications using a nylon-immobilized lipase from Candida cylindracea were carried out in batch and continuous-flow reactors. The immobilized enzyme was effective in catalyzing the synthesis of ethylpropionate, isoamylpropionate, and isoamylbutyrate. With ethanol dissolved in hexane as a substrate, the maximum initial esterification rate was 0.02 mole/(h x g of immobilized protein), but the enzyme was stable only when the substrate concentrations were lower than 0.2 M. With isoamyl alcohol in hexane as a substrate, esterification rates as high as 0.085 mole/(h x g of immobilized protein) were observed and the immobilized enzyme was stable over a much broader concentration range. However, in this case, the use of a solvent, such as hexane, was not necessary for esterification, and the enzyme could be employed in equimolar acid/alcohol mixtures. A packed-bed reactor was operated successfully for the continuous synthesis of esters. The reactor was stable for long periods of time, and the steady-state performance could be accurately predicted on the basis of batch reaction experiments.     

Positive effects of the multipoint covalent immobilization in the reactivation of partially inactivated derivatives of lipase from Thermomyces lanuginosus

Different immobilized preparations of lipase from Thermomyces lanuginosus (TLL) have been inactivated by exposure to high temperatures, guanidine or 95% of dioxane. The studied preparations were: non-stabilized cyanogen bromide (CNBr-TLL), aminated CNBr-TLL (CNBr-TLL-A), and two stabilized preparations of aminated TLL by immobilization on glyoxyl support, Gx(9/10)-TLL-A (TLL-A immobilized at pH 9 and later incubated at pH 10) or Gx(10)-TLL-A (directly immobilized at pH 10). The reactivation of the partially inactivated immobilized enzymes under mild conditions by incubation in aqueous buffer, allowed recovery of some of the original activity, which was improved when it was pre-incubated in guanidine. Amination produced a fairly negative effect on the reactivation of the enzyme, but the multipoint covalent attachment of this aminated enzyme reversed the effect (e.g., recovered activity increased from 20% for CNBr-TLL to 80% for Gx(9/10)-TLL-A). The negative effect of the amination was clearer when the inactivation was caused by exposure to high temperatures, although the multipoint attachment of aminated enzyme was able to improve the recovered activity. The determination of enzyme activity in the presence of hexadecyltrimethylammonium bromide slowed the inactivation rates of all preparations and improved the recovery of activity after incubation under mild conditions, suggesting that the opening mechanism of the lipase could be a critical step in the TLL inactivation/reactivation. The use of multipoint attached TLL preparations did not only improve enzyme stability, but it also increased activity recovery when the preparation was incubated under mild conditions.     

Biodiesel production from pomace oil by using lipase immobilized onto olive pomace

In the present work, microbial lipase from Thermomyces lanuginosus was immobilized by covalent binding onto olive pomace. Immobilized support material used to produce biodiesel with pomace oil and methanol. The properties of the support and immobilized derivative were evaluated by scanning electron microscopy (SEM). The maximum immobilization of T. lanuginosus was obtained as 18.67 mg/g support and the highest specific activity was 10.31 U/mg protein. The properties of immobilized lipase were studied. The effects of protein concentration, pH and buffer concentration on the immobilization and lipase activity were investigated. Biodiesel production using the immobilized lipase was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 93% at 25 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

硅藻土固定中性脂肪酶的制备及其性质

以硅藻土为载体,采用吸附法,对脂肪酶进行固定化,研究了固定化条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件：给酶量为33374U/g,固定化温度为35℃,pH值为7.5,时间为4h,此时固定化酶的活力约为5833U/g载体。固定化酶的热稳定性较游离酶有了很大的提高,其在80℃以下能保持80%以上的酶活,而游离酶60℃残余酶活仅为5%。最适反应温度和最适pH值也分别由游离酶的40℃上升至50℃和由7上升到7.5。对固定化中的中性脂肪酶在生物柴油合成中的应用也进行了初步研究。     

Enhanced reactivity of Rhizopus oryzae lipase displayed on yeast cell surfaces in organic solvents: potential as a whole-cell biocatalyst in organic solvents

Immobilization of enzymes on some solid supports has been used to stabilize enzymes in organic solvents. In this study, we evaluated applications of genetically immobilized Rhizopus oryzae lipase displayed on the cell surface of Saccharomyces cerevisiae in organic solvents and measured the catalytic activity of the displayed enzyme as a fusion protein with alpha-agglutinin. Compared to the activity of a commercial preparation of this lipase, the activity of the new preparation was 4.4 x 10(4)-fold higher in a hydrolysis reaction using p-nitrophenyl palmitate and 3.8 x 10(4)-fold higher in an esterification reaction with palmitic acid and n-pentanol (0.2% H2O). Increased enzyme activity may occur because the lipase displayed on the yeast cell surface is stabilized by the cell wall. We used a combination of error-prone PCR and cell surface display to increase lipase activity. Of 7,000 colonies in a library of mutated lipases, 13 formed a clear halo on plates containing 0.2% methyl palmitate. In organic solvents, the catalytic activity of 5/13 mutants was three- to sixfold higher than that of the original construct. Thus, yeast cells displaying the lipase can be used in organic solvents, and the lipase activity may be increased by a combination of protein engineering and display techniques. Thus, this immobilized lipase, which is more easily prepared and has higher activity than commercially available free and immobilized lipases, may be a practical alternative for the production of esters derived from fatty acids.     

Scale-up of flat-plate reactors for enzymatic hydrolysis of fats and oils

To determine the feasibility of continuous enzymatic fat-splitting, immobilized lipase reactors were constructed from alternating layers of enzyme support material and separator screens. Partially purified lipase from Thermomyces lanuginosus was loaded onto the support material at pH 5.5 by irreversible adsorption. Melted edible tallow at 51°C was pumped through the immobilized enzyme layers and swept from the downstream separator screens by buffer recycled from a continuous oil/water separator. Results from continuous operation of 10-layer reactors were compared with data from single-layer reactors. The activity per square centimeter of 10-layer reactors was nearly as much as that of single-layer reactors at the same enzyme loading and oil feed rate. Data were fitted to an empirical mathematical model.     

Glutaraldehyde activation of polymer Nylon-6 for lipase immobilization: enzyme characteristics and stability

An extracellular alkaline lipase of a thermo tolerant Bacillus coagulans BTS-3 was immobilized onto glutaraldehyde activated Nylon-6 by covalent binding. Under optimum conditions, the immobilization yielded a protein loading of 228 microg/g of Nylon-6. Immobilized enzyme showed maximum activity at a temperature of 55 degrees C and pH 7.5. The enzyme was stable between pH 7.5-9.5. It retained 88% of its original activity at 55 degrees C for 2h and also retained 85% of its original activity after eight cycles of hydrolysis of p-NPP. Kinetic parameters Km and Vmax were found to be 4mM and 10 micromol/min/ml, respectively. The influence of organic solvents on the catalytic activity of immobilized enzyme was also evaluated. The bound lipase showed enhanced activity when exposed to n-heptane. The substrate specificity of immobilized enzyme revealed more efficient hydrolysis of higher carbon length (C-16) ester than other ones.     

二氧化硅纳米材料固定中性脂肪酶的条件优化及其特性

以二氧化硅纳米材料为载体,采用吸附法对脂肪酶进行固定化,研究了不同条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件:给酶量为28300U/g,固定化温度为45oC,pH值为7.5,时间为10h,此时固定化酶的活力约为3867U/g载体。固定化酶的最适反应温度为45oC,比游离酶的反应温度高5oC,最适pH下降到5.5,低于游离酶的反应pH(pH7)。固定化酶的热稳定性和pH稳定性较游离酶有了很大的提高,其在70oC以下能保持70%以上的酶活力,而游离酶在50oC下残余酶活力仅为30%。在pH5～8的范围内,固定化酶的酶活力能保持50%以上,而游离酶只能保持20%左右。用固定化的中性脂肪酶催化不同的油品,即大豆油、菜籽油及泔水油生产生物柴油,菜籽油的酯化率最高。     

介孔分子筛MCM-41固定中性脂肪酶条件的研究

以介孔分子筛MCM-41材料为载体,采用物理吸附法对中性脂肪酶进行了固定化处理,并研究不同条件对固定化脂肪酶催化活性的影响,从而得到该种材料对脂肪酶的最佳固定化条件。给酶量为45960 U/g,固定化温度为45℃,pH值为7.5,时间为3 h,此时固定化酶的活力约为4666 U/g。固定化酶和游离酶的最适反应温度都为40℃,最适pH值为7.5,比游离酶低。固定化酶温度稳定性和pH稳定性较游离酶有所提高。     

树脂载体固定S-腺苷甲硫氨酸合成酶的研究

目的:筛选一种适合S-腺苷甲硫氨酸合成酶固定化的树脂载体,进行固定化工艺优化及固定化酶性质研究。方法:以固定化率和表观酶活回收率为指标,筛选固定化效果最佳的一种树脂,采用单因素实验对固定化条件进行优化。结果:阴离子交换树脂载体ESR-2表现出最优的固定化率(94.03%)和酶活回收率(47.45%);最佳固定化条件为加酶量4U/g、pH 8.0、15℃吸附10h,最佳条件下固定化酶表观酶活为2.1U/g,表观酶活回收率达51.6%。固定化酶的最适pH为8.5,最适温度为35℃,连续反应10批次后酶活剩余77.92%。结论:树脂载体ESR-2固定化S-腺苷甲硫氨酸合成酶酶活及稳定性较好,能够用于S-腺苷甲硫氨酸的工业化大规模生产。     

Gallic acid‐based alkyl esters synthesis in a water‐free system by celite‐bound lipase of Bacillus licheniformis SCD11501

Gallic acid (3, 4, 5‐ trihydroxybenzoic acid) is an important antioxidant, anti‐inflammatory, and radical scavenging agent. In the present study, a purified thermo‐tolerant extra‐cellular lipase of Bacillus licheniformis SCD11501 was successfully immobilized by adsorption on Celite 545 gel matrix followed by treatment with a cross‐linking agent, glutaraldehyde. The celite‐bound lipase treated with glutaraldehyde showed 94.8% binding/retention of enzyme activity (36 U/g; specific activity 16.8 U/g matrix; relative increase in enzyme activity 64.7%) while untreated matrix resulted in 88.1% binding/retention (28.0 U/g matrix; specific activity 8.5 U/g matrix) of lipase. The celite‐bound lipase was successfully used to synthesis methyl gallate (58.2%), ethyl gallate (66.9%), n‐propyl gallate (72.1%), and n‐butyl gallate (63.8%) at 55^oC in 10 h under shaking (150 g) in a water‐free system by sequentially optimizing various reaction parameters. The low conversion of more polar alcohols such as methanol and ethanol into their respective gallate esters might be due to the ability of these alcohols to severely remove water from the protein hydration shell, leading to enzyme inactivation. Molecular sieves added to the reaction mixture resulted in enhanced yield of the alkyl ester(s). The characterization of synthesised esters was done through fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectrum analysis. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:715–723, 2015     

Enhanced Reactivity of Rhizopus oryzae Lipase Displayed on Yeast Cell Surfaces in Organic Solvents: Potential as a Whole-Cell Biocatalyst in Organic Solvents

Immobilization of enzymes on some solid supports has been used to stabilize enzymes in organic solvents. In this study, we evaluated applications of genetically immobilized Rhizopus oryzae lipase displayed on the cell surface of Saccharomyces cerevisiae in organic solvents and measured the catalytic activity of the displayed enzyme as a fusion protein with α-agglutinin. Compared to the activity of a commercial preparation of this lipase, the activity of the new preparation was 4.4 × 10⁴-fold higher in a hydrolysis reaction using p-nitrophenyl palmitate and 3.8 × 10⁴-fold higher in an esterification reaction with palmitic acid and n-pentanol (0.2% H₂O). Increased enzyme activity may occur because the lipase displayed on the yeast cell surface is stabilized by the cell wall. We used a combination of error-prone PCR and cell surface display to increase lipase activity. Of 7,000 colonies in a library of mutated lipases, 13 formed a clear halo on plates containing 0.2% methyl palmitate. In organic solvents, the catalytic activity of 5/13 mutants was three- to sixfold higher than that of the original construct. Thus, yeast cells displaying the lipase can be used in organic solvents, and the lipase activity may be increased by a combination of protein engineering and display techniques. Thus, this immobilized lipase, which is more easily prepared and has higher activity than commercially available free and immobilized lipases, may be a practical alternative for the production of esters derived from fatty acids.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

溶胶凝胶法固定化黑曲霉脂肪酶的性质研究

近年来溶胶-凝胶法固定脂肪酶已成为研究热点。选用TMOS、MTMS、ETMS和PTMS 4种硅烷试剂对黑曲霉脂肪酶进行了固定化研究。固定化的最佳配方为ETMS/TMOS=5：1、水与硅烷试剂分子比为8;固定化脂肪酶的固定率为80.2%、相对活性为136.3%;以乳化橄榄油作为底物,在50℃和pH4.0的条件下,固定化脂肪酶与游离脂肪酶K_m分别为1.899×10^-4M和2.789×10^-4M;最适反应pH均为pH4.0,固定化脂肪酶在pH4.0~pH5.5之间其活性能保持95%以上;固定化脂肪酶最适反应温度为60℃,较游离脂肪酶提高了10℃;固定化脂肪酶的酸碱稳定性和热稳定性较非固定化酶有显著的提高。固定化脂肪酶的使用寿命和保存稳定性良好,使用12次后仍能够保留71.7%活性,在室温避光条件下保存180天后仍可保留79.2%活性。     

Immobilization of lipase on chitin and its use in nonconventional biocatalysis

Chitin was functionalized with hexamethylenediamine followed by glutaraldehyde activation, and its capacity to bind Candida rugosa lipase was investigated. The loading of 250 units g(-1) support showed to be effective, resulting in a uniform enzyme fixation with high catalytic activity. Both free and immobilized lipases were characterized by determining the activity profile as a function of pH, temperature, and thermal stability. For the immobilized lipase, the influence of the reaction temperature and substrate polarity in nonconventional biocatalysis was also analyzed. Production of butyl esters was found to be dependent on the substrate partition coefficient, which accounts the greatest value for the system butanol and butyric acid. The highest enzyme activity was found for the system butanol and caprylic acid at a reaction temperature of 40 degrees C. Under such conditions, the operational stability tests indicated that a small enzyme deactivation occurs after 12 batches, revealing a biocatalyst half-life of 426.7 h.     

Electrospun polyacrylonitrile nanofibrous membranes for lipase immobilization

Polyacrylonitrile (PAN) nanofibers could be fabricated by electrospinning with fiber diameter in the range of 150–300 nm, providing huge surface area for enzyme immobilization and catalytic reactions. Lipase from Candida rugosa was covalently immobilized onto PAN nanofibers by amidination reaction. Aggregates of enzyme molecules were found on nanofiber surface from field emission scanning electron microscopy and covalent bond formation between enzyme molecule and the nanofiber was confirmed from FTIR measurements. After 5 min activation and 60 min reaction with enzyme-containing solution, the protein loading efficiency was quantitative and the activity retention of the immobilized lipase was 81% that of free enzyme. The mechanical strength of the NFM improved after lipase immobilization where tensile stress at break and Young's modulus were almost doubled. The immobilized lipase retained >95% of its initial activity when stored in buffer at 30 °C for 20 days, whereas free lipase lost 80% of its initial activity. The immobilized lipase still retained 70% of its specific activity after 10 repeated batches of reaction. This lipase immobilization method shows the best performance among various immobilized lipase systems using the same source of lipase and substrate when considering protein loading, activity retention, and kinetic parameters.     

Immobilization of lipase to chitosan beads using a natural cross-linker

Genipin, a reagent of plant origin was used for the immobilization of lipase by cross-linking to chitosan beads. The catalytic properties and operational and storage stabilities of the immobilized lipase were compared with the soluble lipase. Under optimum conditions, 198 microg protein was bound per g chitosan with a protein-coupling yield of 35%. The hydrolytic activity was 10.8 U/g chitosan and the relative specific activity was 108%. The immobilized lipase showed better thermal and pH stabilities compared to the soluble form. The immobilized enzyme exhibited mass transfer limitations as reflected by a higher apparent K(m) value and a lower energy of activation. The immobilized enzyme retained about 74% of its initial activity after five hydrolytic cycles.     

Enhanced activity and enantioselectivity of Candida rugosa lipase immobilized on macroporous adsorptive resins for ibuprofen resolution

The lipase from Candida rugosa was immobilized on three commercially available macroporous adsorptive resins for kinetic resolution of ibuprofen. One resin, CRB02, increased the enzyme activity by 50% to 0.027 g g(-1) min(-1). The deactivation constant (0.19 h(-1)) of the immobilized enzyme was half of that of the native enzyme and the enantioselectivity (E = 29.2) of the immobilized lipase was 2.2 times as much as that of the native lipase for the kinetic resolution of ibuprofen with 1-propanol in isooctane at 30 degrees C.     

Stabilization of an intracellular Mucor circinelloides lipase for application in non-aqueous media

Different methods for stabilization of Mucor circinelloides lipase, facilitating its application in organic solvents were tested. Lipase was either isolated from the mycelium and immobilized on solid carriers (derivatives of cellulose, diatomaceous earth, modified porous glass) or immobilized in situ in the mycelium pellets and stabilized. The immobilized enzyme preparations were used for synthesis of sucrose, glucose, butyl and propyl oleates and caprylates, carried out in petroleum and di-n-pentyl ethers. Immobilized preparations of either crude or purified lipase isolated from the mycelium were at least 4–6 times less effective in sucrose esters synthesis than mycelium-bound lipase preparations. Lipase preparation with the highest synthetic activity was obtained by cross-linking of M. circinelloides mycelium pellets with glutardialdehyde (operational stability in sucrose caprylate synthesis was 94% after 4 runs (24 h each), and caprylic acid conversion was 91–85%). The best method for production of mechanically durable biocatalyst, which efficiently catalyzed sucrose esters synthesis, was found to be entrapment of the mycelium-bound lipase in polyvinyl pyrrolidone-containing chitosan beads solidified with hexametapolyphosphate.